Disk Boot Failure "INSERT SYSTEM DISK AND PRESS ENTER"
May 9, 2009
I changed the Boot sequence to CD first, then HDD. Everything ran fine and vista seemingly loaded perfectly. After moving some files from my backup drive back onto my main one and installing some drivers, I was asked to restart my computer (for the drivers) so I did. Remembering that the boot sequence was still set on CD first, and since my driver CD was still in the drive, I decided to set the boot sequence back to the way I had it with XP: HDD and then CD. After doing this I quit BIOS and tried to boot, but I kept getting a message saying: DISK BOOT FAILURE. INSERT SYSTEM DISK AND PRESS ENTER.
So I restarted the computer again, this time with my Vista CD in the drive, and again, the computer wouldn't boot and told me to enter a boot disk. Not knowing what to do, I went back into BIOS and changed the boot sequence back to CD first, then HD. After doing this, and restarting with the Vista CD in the drive, my computer booted up with no problems whatsoever. I tried reinstalling Vista (twice), reformatting the target hard drive, changing the boot sequence around, pretty much everything I could think of......
View 4 Replies
ADVERTISEMENT
Jul 29, 2009
The other night I was in a rush and I held down the power button until it shut off. the next day I tryed turning it on and after the MB homepage came up for 3 secs on the top left hand corner of the screen it said "Disk boot failure, please insert boot disk and press enter" so i fooled around with the priority settings a little bit and nothing worked. I then inserted the windows vista CD and it would say "Loading windows files" then the loading bar came up and it would always freeze at the same point and after about a minute a blue screen came up saying a problem occured and is shutting off the computer to prevent further damage. Iv tryed everything. could my hard drive be damaged or something? Please someone help me. I cant work with much because i cant even get into windows! :-( All i can work with is the Setup menu
View 9 Replies
View Related
Mar 19, 2009
I run vista 32 bit. I'm pretty sure it's Vista personal (PC didn't actually come with a Vista disk). I only use it for music and games,basic stuff. It's a Compaq....It shat itself recently, it wouldn't boot, so i borrowed the Vista Business disk from my dad to repair it/disk boot, and it worked fine, that was a couple days ago. Today it happened again, except it won't repair the same way. I start it up, it goes to the Compaq startup screen with 4 options; [Esc] Boot menu, [F9] Diagnostics, [F10] Setup, [F11] System recovery. Except I can never go to the diagnostics or system recovery menus, i press the keys and nothing happens. Then when i don't press anything it goes to a black screen with "Disk boot failure, insert system disk and press enter", so i do. Then it says "Windows is loading files" with a white bar below, once that's done it goes to the Microsoft Coporation green load bar that scrolls across over and over. Then it suddenly stops for a few minutes and a blue screen appears saying
"A problem has been detected and Windows has shut down to prevent damage to your computer DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: Check to see if any new hardware or software is properly installed. If this is a new installation ask your hardware or software manufacturer for any windows updates you might need. If problems continue disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to disable or remove coponents, restart your computer, press F8 to select advanced startup options, then select safe mode. (pressing F8 does nothing for me) TECHNICAL INFORMATION *** STOP: 0x000000D1 (0x00000000, 0x00000002, 0x00000000, 0x87995395) *** nvstor.sys - Adress 87995395 base at 87991000, Datestamp 46671a61".....
View 4 Replies
View Related
Jan 1, 2009
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
View 9 Replies
View Related
May 8, 2010
I've never really had any problems with my computer acting up. I decided to add 2GB more RAM to my system this morning. Once I finally got them in there after much prodding and force I turned on my machine only to get this dreaded error message. I made sure the cords were still connected to the hard drive. I then took the RAM that I had just added back out but the error message still persists unfortunately. I'm wondering if anyone might have a suggestion as to other techniques I can try to get my system working again. I am currently running Vista Home Premium 32bit.
View 4 Replies
View Related
Sep 21, 2009
I have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like
Disk 0 - F: Expansion Drive - Healthy, Primary Partition
Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?
View 4 Replies
View Related
Jul 30, 2008
I'm running Vista home premium 64 bit with the latest SP. I just installed an old game (Sniper Elite) and after installation it asked for a reboot. I did this and got the message that windows couldn't start, this could be down to a change recently made etc etc. It then said to fix it
1- insert windows disk and reboot
2- select language and click next
3- Choose repair my computer
I did this but when I clicked repair my computer it didn't show any OS in the box to repair! It just says "If you did not see your OS in the list, click load drivers to load drivers for your hard disk"
View 9 Replies
View Related
Jan 30, 2010
I am trying to use a system restore disk for my friend's computer that I downloaded. The computer have Vista, now I have a 32 bit and 64 bit disc. How can I find out which version of Vista I have? I cannot boot into window or safe mode ( I could figure it out from there). I also tried to check the Bios and saw nothing. The laptop only has 2 gigs of RAM I think, so I would assume 32 Bit, but I want to be sure. Also, if I used the wrong one, would it mess up the computer? or could I just redo it with the other CD?
View 5 Replies
View Related
Feb 6, 2010
I'm running Vista Ultimate 64 on a 500 Gig hard drive with 3 partitions.The problem is I marked one of the partitions,not Drive C, as "active" by mistake.I done a Command Prompt to make it "inactive", but when I started the system up again it wouldn't boot.I used the Vista disk for the recovery process, but I got a message "Operating system unknown on (unknown) local disk" i tried fixing the problem with a command prompt "bootrec/fix boot" ,but nothing happened.When I look at the info in Command Prompt it doesn't show the disk partitions, just Disk 0.Also I can't repair because no Disks are listed to be repaired. If I look at the drive in "My Computer" it is full with a file system marked as "Raw" and it wants me to format the drive.I used "Recover My Files" software and it shows some of the documents that are on the drive, but doesn't show any recovery.I looked at some internet post about the message I got and partition and boot problems like I have, but at this point I don't to try any else to make it worse.I would do a reinstall ,but on one of the drives I have some stuff that wasn't backed up.I never thought about backing it up because it wasn't on the C drive.
View 6 Replies
View Related
Mar 23, 2008
I have been trying to create the recovery disk for my Acer laptop, I have used the eRecovery management and when I insert the DVD-R disk it comes up with the message burning failed insert a blank DVD.
View 8 Replies
View Related
May 20, 2008
when i insert my windows vista update disk, the computer reads it then ejects it with no error message or anything. i installed XP on in a few days ago and activated but didnt register it. i figured that this was happening because i didnt register it but now i cant find where to register the XP.
View 4 Replies
View Related
Feb 17, 2008
I've persuaded my boss that I need 16 gig of RAM. The purpose being, of course, to make Vista fly. Is a RAM disk the best way to do this? Can I 'cache' the system disk in a RAM disk? Or is there a better way to make use of my new endownment.
View 6 Replies
View Related
Jan 9, 2008
Automatic backup worked fine until December 26 (daily). Since that date it has failed. T'he error code is as follows: Catastrophic Failure, 0x8000FFFF. Also, check disk will not work.
View 7 Replies
View Related
Nov 7, 2008
I have 2 hard disk drives: Seagate 1000GB 7200.11 32MB Western Digital 150GB 10KRPM 16MB and two days ago, the Seagate hard drive isnt being recognized/seen by the computer. I have an Asus P5Q3 Deluxe mother board. A week before this problem I was getting alot of BSOD's and freezes, turned out to be faulty RAM, but added this in case it might help. I have never had this problem before... I unplugged and replugged the hard drive, and switched a cord that links it to the motherboard. I have also tried putting the cord into a different SATA port but it didnt work, I didnt try a diff power cord yet, but I will see if it works or not and post it PS - I'm not very computer technical or w/e, but
View 6 Replies
View Related
Jul 29, 2009
When I had XP, I had a startup problem so I rebooted with a Windows XP CD that came with the computer. It fixed it.
I'm not sure if this is called a boot or recovery disk, or both.
I was hoping to make a similar disk for my new Vista (Gateway)computer but I'm not sure how to do it. I read something about an emergency thing that takes up 3 DVDs!
View 9 Replies
View Related
Mar 3, 2009
How do I stop Vista from chewing on my disks. I have had a failure of my C: hard disk and i want to stop Vista from chewing on my disk. Had to replace it and reinstall everything
View 9 Replies
View Related
Jun 3, 2008
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies
View Related
Aug 31, 2008
hp tool ask to do this "Then please go to “using DOS system files” column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
View 4 Replies
View Related
Nov 23, 2009
Is it normal for Disk Defragmenter to Analyze the disk AFTER it defragments? I know it does it before and then I click 'Defrag Now' and it proceeds to defrag my hard drive. But today I was watching it and noticed that all of a sudden it stopped defragmenting and the info changed to 'Analyzing disk...'.
View 9 Replies
View Related
Dec 28, 2008
I have four (4) hard disks C: D: E: F: all are connected with sata cable and power cable.(of course) The F: is outside from the pc and connected via external SATA and power cable (like usb NOT usb) I know,with USB external hard disk i can use the safely remove option.
Is there any option to safely remove SATA hard disk without Shut Down the pc?
1) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Properties-Policies-UntikDisable the Enable write cashing on the disk??
2) Start-Control Panel-Device Manager-Disk Drives-Right Click on hard disk-Disable??
View 7 Replies
View Related
Mar 22, 2008
i was messing around with virtual disk programs and made 2 disk drives that are not really there. I can't seem to be able to delete them and its really getting annoying. How can i do this?
View 5 Replies
View Related
Apr 9, 2008
Is this normal? My disk cleanup shown me a 257GB of files to delete on my 80GB disk. I haven't local network and no external disk. I am using vista home premium with sp1, but this problem was without sp1 too. I attached link (for better understanding) to picture of cleanup.
View 8 Replies
View Related
Aug 22, 2008
Specs: HP Pavillion m8100 n.
System: 32 bit
OS: Windows Vista Home Premium
AMD Athlon 64x2 Dual Core Processor 5600*
Welll I have an HP Pavillion m8100n TV PC and a couple of months ago the computer froze and I restarted it but it gave me an error saying there was a boot disk error and I had no idea what to do about itI recovered the computer but a week later same results and now I tried to install Home Premium again and it's giving me errors like:
DRIVE_IRQL_NOT_LESS_OR_EQUAL, and I have NOOO idea, what it means..and at the bottom with techincal information it says: *** STOP: 0X000000D1 (0x0000000000000000, 0x0000000000000002, 0x0000000000000000, 0xFFFFFA60012FC23E)
*nvstor.sys - Address FFFFFA60012FC23E base at FFFFFA60012F6000, DateStamp 46671a38, and I have no idea what to do. And when I tried installing Vista it worked the first time...for like one day than it get all those errors I just mentioned..and in addition to all those bad problems, my recovery partition of the computer was deleted.
View 9 Replies
View Related
May 2, 2008
laptop runs vista but my desktop runs XP. I know this is a Visya community but can anyone tell me why all of a sudden everytime i am booting up on my XP desktop it says "a disk check has been scheduled, windows will now check disk" This process takes hours. how do I get my desktop to boot normally?
View 6 Replies
View Related
Mar 6, 2008
All you usually hear is that Vista is horrible to work with but seems like people here figured it out, so thanks A year ago when i built my new computer and decided to get Vista, I went to BestBuy and they gave me what I thought i needed. Turns out it was an upgrade version of Vista Ultimate and I ended up having to use my old IDE HDD ever since. I'm wondering if there's a way to change so that Vista can load off of my SATA HDD.
View 4 Replies
View Related
Mar 23, 2008
Just finished building my new workstation....1x 250GB SATA drive on wich I want to install Vista Ultimate x64. 3x 500GB SATA drive wich i'd like to have running in Raid-5.
Asus P5E motherboard.
My first take was this:
1) connect all HDD's
2) Install vista on 250GB drive, leave 500GB drives alone for now.
3) Update Vista.
4) Restart, enable RAID in BIOS.
5) Ctrl+I at startup, setup RAID-5 with the 3 500GB HDD's in RAIDmanager. So far so good..... RAID manager shows RAID-5 correctly and shows that 250GB drive isnon-raid.
6) Reset, problem: no startup *"No bootbable drives found"* In BIOS, it shows all drives under boot devices, and the 250GB drive asthe first boot disk.But before the 250GB name it sais RAID also, wich I guess it shouldnot.......
View 4 Replies
View Related
Jun 17, 2008
I am a relatively unexperienced windows vista user using windows home premium at 32 bit on an acer aspire 6920 notebook. I noticed that occassionaly my disk space would drop dramatically without me doing anything. 100s of mbs would just disappear for no reason, so probably being stupid i decided to run the disk fragmenter to try and fix the problem. BUT to my horror i was shocked to find that the disk fragmenter began to eat up my hard disk space big style. I went from 79.7GB to 72.5GB in just over an hour. What the hell happened and can it be fixed? can i get my disk space back? i thought the disk fragmenter was supposed to help your computer not rob it. does anyone else have this problem and can someone please help me? im kinda desparate, i cant believe it.
View 9 Replies
View Related
Mar 29, 2008
My Disk is split into 2 partitions, Vista (C: ) and Data (E, each is about 70 Gb. I do not use the Data partition. I want to delete it and allow Vista(C to use all 140 Gb. The Help pages suggest that if I delete (or reduce the size of) "Data", the free space becomes unallocated? Can I repartition the disk to allow Vista C: to acces all 140 Gb?
View 9 Replies
View Related
Jun 20, 2008
When I try to open a disk, the driver ejects it and it says please insert a disk into drive. I tried uninstalling and installing the CD RW DRIVER, but it still doesn't work.
View 5 Replies
View Related
Mar 13, 2009
I need to replace my wife's motherboard, and I am trying to minimize the amount of change. She is currently running XP, but the hardware is old enough that I cannot simply swap the MBs, because a new board will need a different HAL. I was thinking about installing XP and migrating applications. I was wondering what would happen if I cloned her disk to a SATA disk and installed a Vista upgrade on top of the XP disk. I would run setup and provide the appropriate drivers at the F6 prompt. She has used Vista on occasion when we are out-of-town. I have a separate userID on my laptop that is configured to look as much as possible like XP. The question is whether a Vista upgrade would work on top of an XP image that used a lot of older hardware.
View 4 Replies
View Related
Jul 25, 2008
I recently purchased a new Dell with Vista 32 Home Premium (OEM). I would really like to try out 64bit Home Premim. If I purchased a 64bit OEM disk could I install it on a partition on Drive C and still retain a fully functional 32bit Vista.
Note : My system has 2 x 640 gb Sata Drives, but the way it has been configured, in windows explorer I see only a c: drive (1.15Tb) and a d: drive which is only 10gb, this is a recovery drive.
View 8 Replies
View Related
