For the last few days my 'pc' (http://www.vistax64.com/) takes three and half minutes to load. I did have the windows update KB954430 installed around that time. All malware and virus scans come up clean. Could this update be the problem? It takes 90 sec. to get to the welcome screen, then the screen goes black untill the programs begin to load at 195 seconds. the loading of programs seems to be in a normal time frame.
View 4 RepliesMy CPU will idle around 30%, and my memory will idle around 40%. I have 3.5GB of ram, and a dualcore 2.4GHZ cpu. I was checking windows update, and it says it cannot download any updates, and it's most recent check was on 9/9/2008. I tried manually downloaded the windows vista service pack 1, but it keeps failing and giving me error 80070026. Some people suggested I turn off things like real time protection, so I uninstalled my McAfee virus scan, and downloaded windows defender instead. I then disabled real time protection on the window's defender. Nothing else should have real time protection, so why can't I update?
View 4 Replies View RelatedVista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies View RelatedLast Thursday my pc downloaded and installed the latest set of updates and since then the Internet speed has been sluggish at best and non-existant at worst.
I contacted my ISP and they did all their tests and announced that the signal was good and I might have a virus, so I got a bit paranoid and ran scan after scan (after the nightmare of trying to get the latest updates). I ran these with Zone Alarm Extreme and Spyware Doctor (but not together) and all the results were clean.
So I'm wondering if the latest Updates are to blame; one of the kids' laptops has exactly the same problem (he uses a router while I use a cable) and he downloaded the updates at the same time.
Interestingly the other kid's laptop seems to be untouched, but he has 32 bit Vista as opposed to our 64 bit, and it appears that we're all using different browsers (IE8, Mozilla and Chrome)
I downloaded and installed MS update KB980182 and now the computer runs a lot slower when I am using Internet Explorer. I have done everything I can think of to rectify the problem but it does no good. When I unistall the update, IE runs at its normal speed and when I reinstall it, the problem returns, therefore it has something to do with this update.
View 7 Replies View RelatedI am upgrading from XP to Vista (on the way to Windows 7). After it completes the compatibility check it starts to copy files. About 20 minutes into the process the upgrade aborts with the following message: "Windows could not update the computer's boot configuration. Installation cannot proceed."
View 5 Replies View RelatedVista upgrade was cancelled "Windows could not update the computer's boot configuration." Installation cannot proceed.
View 6 Replies View Relatedi installed vista home up from XP but it takes a good 5 mins to boot up.
View 5 Replies View Relatedinstalled SP1. Used to take 10 minutes to boot and another 1-2 to log in. Now it's 15 min to boot and at least 8 minutes to log in. Launching any program is coffee trip time, if I brew a new pot sometimes Vista is ready when I get back. Nice. Attta boy M$, way to bork it up again core 2 duo 2ghz, 4GB of ram (top of the line HP notebook) Fresh install of the OS (drive barfed)
View 4 Replies View Relatedi was just installing some extra languages on the ultimate extra update, i just selected all the updates to download as i was in a rush go leave home, it came up to about 5gb, it wasnt a problem because i was going out for about 4 hours. i came back home, download was complete and was installing the language packs, at first i thought it was stuck because computer started to run extra sluggish, but just as i was about to restart computer the bar moved, so i just waited, just doing some browsing etc on this forum, researching and getting tips and tricks etc., despite the fact that it was still running slow..i checked the cpu usage, the cpu was fine, but with suprise, the ram was running about 1.9gb ( i have 2gb ram). first of all, is the language pack suppose to take that long to install? and is it suppose to use that much of the ram?
View 5 Replies View Relatedi just bought a dell and it has vista is a home basic do i have to install updates from microsoft website or it already should have everything installed? it seems to be slow and when i play my videos in wmp they see like in slow motion. what should it be?
View 4 Replies View RelatedI am going to sound like a real big rookie, well because I am. My portable computer is for business use only. I seem to never use the battery as I am always plugged in somewhere. It seems like if I have a long update on a slower connection like anti-virus or windows update the computer shuts down after awhile. I am thinking these updates are not finishing. I would be working on my business and my connection would be very very slow. They suddenly it would spead up to a good usable speed. I noticed that after I got a message that an update had finally finished that matched me finally being able to work. I want to know how to keep Vista from shutting down and allow updates and downloads to complete while I am asleep so when I am at the computer I can work. I have a ton to learn.
View 4 Replies View RelatedI used to be able to boot up in no time. The microsoft vista "lightbar" used to scroll left to right about 5 times. Now, it scrolls 43 times.
I did the Visual basic test that I found here and my boot up time is 155 seconds. I do know part of my problem is my antivirus but looking around I found more problems.I have major bootup errors in the event log.
I tried everything in here: Boot Up And I still have a slow startup: 30-40 seconds just on the Windows loading bar. When I first installed Vista it was not like this. I tried to figure out what was causing this so I downloaded xperf and did a xbootmgr trace.
View 9 Replies View RelatedI have all the latest windows updates installed, including Service Pack 2. I also have latest BIOS installed. I have already configured msconfig for start up applications and services. But, still my computer boots very slowly. Right now it takes about 1 minute and 20 seconds to boot up.
View 9 Replies View RelatedCan a slow boot up of an Acer Aspire 4710 laptop is caused by a not updated BIOS software? The laptop has a Core 2 duo processor and Windows Vista Home Basic.
View 7 Replies View RelatedA rough timeline:Turn on PC, 18 seconds - bios screen flashes up for a split second (this hasn't always happened), follwed by "checking nv ram" followed by a screen that shows the two CD drives (why?)- black- 34 seconds - vista loading bar. 46 seconds - black 1.53 (!!!!!) - Windows icon appears. 1.56 - login ready
On fresh install (week or so ago) it was fine, then there were 48 updates to install...since then it's been slow. I've ensured HDD is first boot device, i've defragged the HDD, even tried RC1 of SP1, but that just seemed to make it crash so i've since uninstalled it - made no difference to my boot time.
my Vista booted with scrolling the green thingy about 7 times. Yesterday, all of a sudden, it started to boot with scrolling it about 20-25 times. I tried to turn off some programs to load with Windows (Steam, Adobe and iTunes). Also turned some services off/put to Manual (like Printer Spooler, iTunes Helper and so on), but that didn't help. When I installed Windows I found out that disabling service named Server made the boot time that short and it's still disabled. what might slow down the boot up process? I guess something related to network and networking services but I'm not sure.
View 6 Replies View RelatedI bought a PC with Windows Vista Home Premium, 32bit, Norton McAfee AV included.
Specs: Intel Core 2 Quad Q9300 2.5 GHz, 4 GB Ram, Videocard: Nvidia Geforce 9600 GT.
First time I started it up It worked fine. Then I installed some programs (two games, a DVD media player, MSN Messenger).
The first few times I restarted the PC it was fine, but then after Windows Vista installed the Updates it rebooted and now it reboots EXTREMELY slow. And this on the first day!
It takes at least 10 minutes at the Bios-Screen and then when it is done there it slowly (another 5 min at least) to start windows.
After start-up everything works fine.
What should I do? Did I do something wrong during an install?
I neve had such problems with XP, although removing McAfee AV really quickened the start up (not the initial Bios Booting though) whern I had XP.
I've tried all the common fixes posted around the net. I get a two minute boot in safe mode and in reg mode with nothing in the startup. I feel that after looking at the bootlog file that it has something to do with drivers that don't load during the boot. According to the log I have dozens and dozens of drivers that apparently don't load. Here is a sample of the log. I don't enclose the whole log because it is very large. I will if necessary:
Code:
Loaded driver SystemRootsystem32DRIVERSsnapman.sys
Loaded driver SystemRootSystem32Driversmup.sys
Loaded driver SystemRootSystem32driversecache.sys
Loaded driver SystemRootSystem32DRIVERSfvevol.sys
Loaded driver SystemRootsystem32driversdisk.sys
Loaded driver SystemRootsystem32driversCLASSPNP.SYS
Loaded driver SystemRootsystem32driverscrcdisk.sys
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%isatap.displayname%;Microsoft ISATAP Adapter
Did not load driver @nettun.inf,%tunmp.displayname%;Microsoft Tun Miniport Adapter
Did not load driver @hal.inf,%acpiapic.devicedesc%;ACPI x86-based PC.......................
It takes about 2 minutes to boot to all my startup programs. However, for the next 10 to 15 minuts the hard drive is running continuously. If I try to run another app., e.g. Outlook, it will freeze and the "Not Responding" notation appears at the top of the screen. I've tried to nail down what might be hogging the hard drive (using reliability and performance monitor) but can't identify any single program. I have 50 gigs free space, 2 GB RAM. I defrag once a week and clean up temp files and cashes once a day. It seems all proposed solutions I've run across lead me to one of the registry cleanup programs. I run Reg. Clean & Wise Registry Cleaner once a week. Real time monitoring by McCafee and Windows Defender. I have run both AD Aware and Spy Bot frequently.
View 8 Replies View Relatedi recently formatted and reinstalled windows on my computer and for some reason i have had nothing but trouble since. a run down of my problems, i had 4gb of ram now she will only run on 2gb, she used to be really fast at booting up and shuting down and now i can flick her on and have my breakfast before she has even thought about doing anything. I had a nosey in the event logger and amongst the hundred of errors daily, the one mark BOOT ERROR, is this one.
no viruses, hard drives are defragged and check disked. for the record when she is on she is fine, no problems, just booting up and shutting down it starts playing up
Windows has started up:.............
I have a notebook with Windows Vista Home Premium 64-bit on it. The problem is that my boot is take a lot of time. First I get the BIOS screen with the Dell logo that is taking about 3 seconds (so that is good). But the loading bar is taking a lot of time. It is going from left to right for 13 times (This is not normal I think). After that, my screen is going blank for about 10 seconds and then I get a black screen with mouse cursor for about 10 seconds and then again a blank screen for 10 seconds (So a total of 30 seconds, which also not normal). After that I get the vista logo with the sound and the welcome screen, which is taking a long time (for about 25 seconds).
After that I get a blank screen for 20 seconds and then the desktop appears and from now on everything is running fine. So my question is: WHAT is causing this slow boot! I have already read the tutorial 'How to Speed Up Vista Boot Time' and did everyting they said. My startup programs are Kaspersky Internet Security and MSN Messenger. I have enabled superfetch and prefetch and set the registry value on 3. What else can I do to decrease the boot time?
My computer has Vista Home Premium installed but about a couple of weeks ago my computer started to boot up slow (taking about 10 minutes). I couldn't figure out the problem and neither could anybody else so I am going to re-install vista.Is it possible to re-install vista without losing any personal or program data?
View 4 Replies View RelatedI've recently put together a new computer using these parts: I've updated to Vista Ultimate SP1, run multiple disk clean ups, defrags, use CCleaner, clean the registry, defrag the registry, disabled services and have made tweaks according to the guide provided on this website and have minimal startup programs running but my boot times average around 2 minutes. For a new computer with new hardware, this seems unreasonable as many users report boot times between 30-60 seconds. What could be wrong with my computer? On the vista loading screen with the green bar, it goes through about 22 cycles.
View 5 Replies View RelatedI'm trying to install windows vista onto my net book but every time I try to, it tells me that it can't update the boot configuration of the computer and stops the installation. Does anyone know what I should do to install it
View 4 Replies View RelatedJust wondering why the reported Physical Memory in the Task Manager drops to 14%, after an hour or so, from 28% when initially starting the system. Processes drop from 49 to 46. Mainly Trustedinstaller and winupdate processes. I know some applications check for updates upon boot, but I kind of disabled most (if not all) of them except Vista updates. Also one of the many svchost.exe starts off with a reported Commit Size of 177K and later is down to 155K. This of course is not a problem. Just Vista64 curious!
View 3 Replies View RelatedThat is the message I get from the icon in my Vista tray. When I try to manually check for Windows Updates I get the message that I need to "first install an update for Windows Update". When I try to install that update for Windows Update, I get error code 80070643. There is a lot written about Windows Update error 80070643 having specifically to do with restarting the Office Source Engine for Microsoft Office 2003. HOWEVER, I do not have Microsoft Office 2003 installed on my system and this is not my issue! I am quite fearful at this point that I am vulnerable to all sorts of attacks considering that I haven't updated Vista for about 6 months now. This is not good.
View 6 Replies View RelatedSo have an intel mobo, and there is a BIOS update for it, but the windows exe that Intel provides to flash it right from inside windows doesn't work in Vista 64 Ultimate. So My other options are to create a bootable USB stick or a bootable CD. I actually don't have a USB stick I can use for this, so I want to go the CD route. Either way I don't know how I can make a bootable Vista disk that gets me to a command prompt that I can put these bios files on so then I can run the bios update. I think this BIOS update could solve some problems I'm having getting things running smoothly.
View 6 Replies View Relatedwhen going to the windows update window,i get a white blank page and it says "the page failed to load"i did restart, same issue.
what is it all about?
and another thing, i don't have a Floppy drive in my computer however a Floppy A: drive is present in "Computer" how can i remove it from the list?
Microsoft Update was first released a few years ago for Windows XP and Server 2003 as a great way to update all of your Microsoft software installed on your PC. Not only would it update Windows, but it would also update Microsoft Office. Are you a Microsoft Outlook user? If so, Microsoft Update would even download updated junk mail signatures when they are released.
In Windows Vista the new Windows Update application is no longer web-based. Microsoft has built-in the old Microsoft Update functionality into the new interface but you need to turn it on before you can use it. Follow these steps to turn on updates for other Microsoft applications: ...