I downloaded and installed MS update KB980182 and now the computer runs a lot slower when I am using Internet Explorer. I have done everything I can think of to rectify the problem but it does no good. When I unistall the update, IE runs at its normal speed and when I reinstall it, the problem returns, therefore it has something to do with this update.
Last Thursday my pc downloaded and installed the latest set of updates and since then the Internet speed has been sluggish at best and non-existant at worst.
I contacted my ISP and they did all their tests and announced that the signal was good and I might have a virus, so I got a bit paranoid and ran scan after scan (after the nightmare of trying to get the latest updates). I ran these with Zone Alarm Extreme and Spyware Doctor (but not together) and all the results were clean.
So I'm wondering if the latest Updates are to blame; one of the kids' laptops has exactly the same problem (he uses a router while I use a cable) and he downloaded the updates at the same time.
Interestingly the other kid's laptop seems to be untouched, but he has 32 bit Vista as opposed to our 64 bit, and it appears that we're all using different browsers (IE8, Mozilla and Chrome)
i was just installing some extra languages on the ultimate extra update, i just selected all the updates to download as i was in a rush go leave home, it came up to about 5gb, it wasnt a problem because i was going out for about 4 hours. i came back home, download was complete and was installing the language packs, at first i thought it was stuck because computer started to run extra sluggish, but just as i was about to restart computer the bar moved, so i just waited, just doing some browsing etc on this forum, researching and getting tips and tricks etc., despite the fact that it was still running slow..i checked the cpu usage, the cpu was fine, but with suprise, the ram was running about 1.9gb ( i have 2gb ram). first of all, is the language pack suppose to take that long to install? and is it suppose to use that much of the ram?
My CPU will idle around 30%, and my memory will idle around 40%. I have 3.5GB of ram, and a dualcore 2.4GHZ cpu. I was checking windows update, and it says it cannot download any updates, and it's most recent check was on 9/9/2008. I tried manually downloaded the windows vista service pack 1, but it keeps failing and giving me error 80070026. Some people suggested I turn off things like real time protection, so I uninstalled my McAfee virus scan, and downloaded windows defender instead. I then disabled real time protection on the window's defender. Nothing else should have real time protection, so why can't I update?
For the last few days my 'pc' (http://www.vistax64.com/) takes three and half minutes to load. I did have the windows update KB954430 installed around that time. All malware and virus scans come up clean. Could this update be the problem? It takes 90 sec. to get to the welcome screen, then the screen goes black untill the programs begin to load at 195 seconds. the loading of programs seems to be in a normal time frame.
i just bought a dell and it has vista is a home basic do i have to install updates from microsoft website or it already should have everything installed? it seems to be slow and when i play my videos in wmp they see like in slow motion. what should it be?
I am going to sound like a real big rookie, well because I am. My portable computer is for business use only. I seem to never use the battery as I am always plugged in somewhere. It seems like if I have a long update on a slower connection like anti-virus or windows update the computer shuts down after awhile. I am thinking these updates are not finishing. I would be working on my business and my connection would be very very slow. They suddenly it would spead up to a good usable speed. I noticed that after I got a message that an update had finally finished that matched me finally being able to work. I want to know how to keep Vista from shutting down and allow updates and downloads to complete while I am asleep so when I am at the computer I can work. I have a ton to learn.
That is the message I get from the icon in my Vista tray. When I try to manually check for Windows Updates I get the message that I need to "first install an update for Windows Update". When I try to install that update for Windows Update, I get error code 80070643. There is a lot written about Windows Update error 80070643 having specifically to do with restarting the Office Source Engine for Microsoft Office 2003. HOWEVER, I do not have Microsoft Office 2003 installed on my system and this is not my issue! I am quite fearful at this point that I am vulnerable to all sorts of attacks considering that I haven't updated Vista for about 6 months now. This is not good.
As far as I can determine, this update (released 22Oct08) does not work, at least not with Windows Vista Home Premium. I had update 7 running, and got an update notification for Release 10 earlier today. Downloaded and installed the update, tried the Java test page, Firefox (both 3.0.3 and today's Minefield beta-test for Firefox 3.1) hung. Tried the update in IE7, that, too, hung.
Went to Control Panel, clicked on the Java icon, had some problems opening it; when it did finally open, I went into Advanced and found that Update 10 was not recognizing IE. Opened IE, redownloaded the off-line update, to see if that worked; answer is, no, it still did not recognize IE. Back to Java, found the off-line installed for Update 7, removed 10, reinstalled 7; Java works once again. In the midst of this aggravation, trying to figure out what the problem was, I did find one link to an article that said Update 10 had been delayed due to some unspecified problem. Seems to me that, at least for Vista Home Premium, there is still at least one unspecified problem with Update 10.
Microsoft Update was first released a few years ago for Windows XP and Server 2003 as a great way to update all of your Microsoft software installed on your PC. Not only would it update Windows, but it would also update Microsoft Office. Are you a Microsoft Outlook user? If so, Microsoft Update would even download updated junk mail signatures when they are released.
In Windows Vista the new Windows Update application is no longer web-based. Microsoft has built-in the old Microsoft Update functionality into the new interface but you need to turn it on before you can use it. Follow these steps to turn on updates for other Microsoft applications: ...
I understand that Vista SP2 RC update has to be uninstalled before installing SP2 RTM update(when bcomes available). Does 5the Windows Update automatically uninstall SP2 RC update or does it has to be done manually?
The last time an update was installed was in January..since the next time i was offered an update, Windows Update or any of the programs that use windows update fail to update. Also i can't download the updates manually..standalone msu installers also dont work.. windows defender, IE8 installations also fail to update. And unfortunately i have deleted the recent system restore checkpoints before i knew about this problem. Windows Update gives error 80070002, i have tried the "solution" to delete temp update files, and all other solutions i could find on the internet. Windows defender gives the same error.
The updates can be downloaded from windows update, but cannot be download (not even manually in .msu package) I also lost many shortcut files of MS Office (the icon turned white and they lost their target). Some shortcuts of 3rd party programs are also lost (which were supposed to be in c:windowsinstallerlabla I have Windows Vista Home Basic with SP1 (SP1 came with the ssytem when i bought it). This is very weird. I have no other choice than to reformat drive and use recovery disk.
I couldn't make my lap-top update. Gives me "couldn't check update" and "update-error code 80070246". And also while starting-up it gives me "checking uptades" after welcome message.
1 Vista Home Premium 32 PC 1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer: Connected via parallel to Vista 32 machine Printer is configured for sharing and is installed on both machines test pages print successfully from both machines
Additional notes: During printer setup on the Vista 32 machine, I attempted to install additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were identified successfully, and I added the network printer. I was not asked to install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs with normal speeds. Printing from the network computer Vista 64 using the shared printer installed on Vista 32 is extremely slow. Even typing in print job changes in the print dialog window takes 30 seconds or so for each key stroke to register a response onscreen.
I am updating my computer and I thought it was finish but my computer restarts and I encountered the death blue screen. I can't switch into safe mode, safe mode with networking, safe mode with Command Prompt and Last Known good configuration. I don't know how to solve this problem because I can't get into any of the modes and even I inserted the installation disc I can't still see any repair computer or what. It will just turn to blank screen with space at the upper left after if i will insert the installation disc.
I am running Office Home and Student 2007 and have just run a diagnostic which suggests that my installation is not up to date and that I go to the Microsoft Update site and download any available updates. When I do, I am asked to sign on with 'Microsoft Update'. The idea is, I think, to combine this Microsoft Update with my Windows Update and let Office updates come though along with updates for Vista, IE, etc. I have posted here before with issues concerning updates including a fiasco I had last November which involved Office updates and am wondering, since Office seems to be working well at the moment (I was bored so I did a diagnostic ) should I bother with this or just leave it? Does Office have security issues like IE and Vista?
I just bought a new laptop a Dell XPS 1330, with Vista. And it is slow in launching everything. Once I'm in a program, it's usually okay, but it takes 5-10 seconds just to open the start menu, or switch between programs, or open a program is more like 20-30 seconds. It's even slower if I'm coming out of sleep mode, it never gets faster, I always have to boot even though I see nothing in the task manager. Is this the way it is supposed to be, and if not, how can I tell if this is a Vista problem or the laptop? My cpu runs at about 3% capacity and my ram is around 50 when no applications are open.
My Vista x64 Ultimate was fast at first, but now after around 6months it has been slower. I have cleaned all Vista components and uninstalled unnecessary softwares/games. My HDD has 70% space remaining and its defragged. I have fast AVG antivirus and when I try to open a new folder, let's say my documents folder, it opens it fast but its all blank white and it keeps loading for like 3-5 seconds and then the contents show up. What's wrong? I expect an immediately folder content showing up especially when I have 3.55 GHz quad core and 8800 GTX T_T
I have found a solution for slow IE problem, it made my browsing extreamly faster. Tools-> manage add-ons-> enable or disable add-ons under enabled section look for "SSVHelperClass"(java plugin add-on) and highlight then click disable button. Restart IE and you could see the difference.
Since my CPU is 1333, if I install DDR-2 800 rams, my ratio will be 5:4 or something like that.
1. Will my rams slow down to the FSB of the CPU?
2. If yes, what is the point in installing faster rams if they are slowing down to the FSB of the CPU?
3. If there is a benefit, what is it?
4. If rams are faster, do they somehow increase the performance of the graphics cards? (For, both ATI and NVIDIA make use of the system ram Hyper Memory and Turbo Cache)
5. Wouldn't it be effected by CPU's FSB? Lets say you have a DDR-4 graphics card, and your rams are DDR-2 800, rams are slower than the card, and CPU is slower than both of them.
I purchased my system (Laptop, dual core HP Paviolion dv6700) and installed vista home premium in December 2008. In the beginning system's performance was good but now (within 6 months) it starts so slow. What may be the problem.
I searched for "IE8" and it said no results...find that a little hard to believe
Anyways, odd problem to have. After being logged into Winders for a little while, doing some surfing, etc., I'll go to close IE8, click the red x, and it'll just sit there for 5-6 seconds, and then finally close. If I log off and log back on, it'll behave properly, but sooner or later will start to act up again.
Anyone else run into this? I'm running IE7Pro, but I've been running that for a while now and this has only recently popped up.
I have a Sony Vaio VGN-FZ11S, with Vista Home 32. The laptop has a Core 2 Duo T7100 @1.8GHz and 2Gb RAM. I run Office 2007, Dreamweaver, Flash, Fireworks, Corel, etc... Sometimes the machine becomes so slow I almost fall asleep (literally!) while waiting for it do perform a simple task such as opening IE or showing a menu or opening an email message. I should add that my PST has 5.6 Gb. I'd like to reduce its size, although I don't think it is the cause of the slow running, but I need to keep many emails... I have talked with Sony and they simply refuse to let their customers downgrade to Xp. So, besides tweaking (which I don't know how to), what can I do to my laptop to avoid these episodes of EXTREMELY slow running?
I have have continuous slow response in loading of web pages since install IE 8.Am running on a 5 meg internet connection and at times loading a simple Amazon page will take 85 seconds. Totally unacceptable when it was instantious with IE 7.How do I return to IE 7 as attempts to do so thru MS site informs me of a 2 hr plus download?
I am experiencing very slow boot up of Vista Home Premium 32 bit. It takes good 10 - 12 minutes to completely boot up. I am using Dell desk top inspiron with 4 Gb RAM. I did some research and learnt how to filter the event log and diagnose where the degradation occurs. In my case, a lot of degradation found in loading drivers like sound and video. Also AVG resident shield slows down.
When I first turn on the system, black screen with a mouse curser appears for two - three minutes. Then Welcome message appears and again it blanks out for another two to three minutes. Then the desk top appears and the icons are slowly appearing. By the time complete boot is in place - system idle mode, it is ten to twelve minutes.