I am experiencing very slow boot up of Vista Home Premium 32 bit. It takes good 10 - 12 minutes to completely boot up. I am using Dell desk top inspiron with 4 Gb RAM. I did some research and learnt how to filter the event log and diagnose where the degradation occurs. In my case, a lot of degradation found in loading drivers like sound and video. Also AVG resident shield slows down.
When I first turn on the system, black screen with a mouse curser appears for two - three minutes. Then Welcome message appears and again it blanks out for another two to three minutes. Then the desk top appears and the icons are slowly appearing. By the time complete boot is in place - system idle mode, it is ten to twelve minutes.
I have a pc that has been booting slow and I checked in the performance area and found two issues effecting the system. One is for slow startup, and it gives me three programs that are doing this. I see one I will not be able to do anything with and two I should. They are:
1.) Symantec ( 67.7 seconds) ccSvchst.exe 2.) Acrobat Distiller (51.1 seconds) acrodist.exe 3.) Windows Mail (28.4 seconds) WinMail.exe
I went to find the programs and get them to stop loading "2 and 3) but they still load up. How do I stop them from loading on startup? Also on the other issue for visual settings. I tried to goto basic vista display but still get this Performance issue coming up in the Advanced tools area.
So a few weeks ago, I was using my Gateway M-Series laptop with Vista Home Premium installed and I ran into a problem while using Firefox. The computer screen had a white-ish glow overlapping the desktop background and the computer had locked up. I had to turn off the computer manually and later, I tried rebooting it. Since then, my computer has failed to boot, and after many attempts of trying to access the "Recovery Drive" and other boot settings (Safe Mode etc..) I am stuck. The computer will boot the Gateway screen, give me options to the BIOS Menu & Settings (which I can access) and will eventually take me to a screen with two options: 1) "Launch Startup Repair (recommended)" and 2) "Start Windows Normally." I have tried booting with both options and neither will fully boot. After the Windows loading screen, the screen will go black and a very discreet sound emits from what I believe is the hard drive.
For a at least a month now my computer has been freezing about five minutes after starting the boot-up sequence (as in 5 minutes after hitting the power button). No BSoD or anything. Just a freeze. I have tried many different things to troubleshoot. First let me tell you my specs and then I'll tell you what I've already tried so far.
Running Windows Vista x64 SP1 now here's what I've tried so far: initially tried system restore to a point before the problem started scanned for viruses and malware using Avira, Trendmicro online scan, Avast, Superantispyware and Malwarebytes upgraded my motherboard's BIOS returned all settings to stock upped the videocard fan speeds using Rivatuner replaced the video card ran chkdsk searched google endlessly for solutions I may be forgetting other things.
I'll let you know as hey are proposed. Usually I can finally get it to boot after several tries and I can play games normally and whatnot. Just now I was finally able to get it to boot on the 5th try. Another symptom that may or may not be related is that sometimes it freezes when you attempt to do something like attach a photo to a web-based email or upload photos to an online photo site. I built this system myself and I really hope I can get this fixed. I think my wife may be losing faith in me! Let me know any other info I can post that might help. My technical proficiency is pretty high.
this Vista Ultimate goes into a permanent hard freeze during boot-up. Waiting it out does no good. It happens as it displays the little scroll bar. So far my solution of re-starting at 'last good startup' has worked, but I am wondering what might be causing the problem.
Suddenly my CounterSpy pops up with something saying that a program is trying to change my registry, I wasn't trying to do anything with that so I hit block. Few seconds later another CS pop up says "A known program is attempting to run was blocked" All it said was Program: services.exe (Misc (general )). Then about a minute later the system rebooted itself.
So after it rebooted it'll take me to the "Windows failed to start. A recent hardware or software change might be the cause." screen with the safe mode options. Here's where the prob starts. After I select any of the safe modes (w/networking, w/command prompt, last know good config.,) or start windows normally I jus get looped back to the BSOD and go through this cycle of rebooting and back to the safe mode select screen. I've tried popping in the windows install cd and trying to repair from there via recovery. It works. Nice! The thing is it recovers right to where the whole mess started with the CounterSpy pop up and I have about 60 seconds to where the system will reboot itself and I'm back to the BSOD and safe mode screens. So basically I'm runnin in cicrles here. It's Vista Premium 32bit btw
I've checked and General is "normal" and boot is not ticked.I get about 15 secs of blackness, 5 secs of progress bar at the bottom,another 10 secs of blackness and then Vista.If I tick no gui in boot, I get "aurora" for the whole duration with no progress bar.
It boots on the F2 setup screen does several seconds of the loading bar, then my screen says 'no signal' and it goes back to the F2 setup screen and freezes. Then I have to turn of my computer by holding down the power button and start it again the second time where it boots fine.
I have a Toshiba Laptop which came pre-installed with Vista home. Lately, I have received an Invalid Partition Table on bootup. I tried using the recovery disk with the OS on it as a boot disk but it doesn't seem to be working even when I tell the bios to boot from CD/DVD.
I have 2 pc's running vista Home premium. As of the morning of 5/7/08, both of them are having an issue after bootup where cpu usage is near 100% for about 20-30 minutes. The computers are completely un-usable in this state. Looking at resource monitor(which takes about 10 minutes to load), both are showing svchost (netsvcs) PID 1456 at 100%. After this initial 20 to 30 minute lock up session, both computers seem to work fine. After investigating the issue a bit, it has something to do with windows update. If I go to control panel windows update, and try to update, the same thing happens.
Not sure if this means anything but both computers have update KB940510 under the windows update control panel console, dated 5/7/2008. From researchign this update it is something to do with windows validation. Both PC's have OEM installs of vista, so I dont 'think' the validation is the issue.......
for a coupla months now but it finally got to me last night, my Vista 32bit PC is hogging my physical memory on bootup---seems like forever. my light on front is constantly on. i ran through a lot of tests last night to see whats up. i did see major spikes in my resources moniter. but i could not see or find what was useing it up. my physical memory showed 65% usage. i managed to do some windows updates and reboot which helped. i also ran chkdsk for my C hard drive.(i have 3 hard drives total). since it rebooted without me there, i assume the C hard drive may be ok.
I've been trying to find an issue for, but so far I have not found a thread anywhere on the internet that even addressed my problem precisely. Occasionally, usually after my computer has been running awhile, my screen will randomly scramble up, and parts of it will become inoperable. There are no "black lines" going across the screen, and my screen hasn't "rotated"; parts of the screen shift up, down, left, or right, but nothing is covered by lines or rotated. I don't believe this to be a problem with my monitor. My reason to believe this is because sometimes, when I open a folder from my desktop, Windows Explorer (explorer.exe) will crash and restart, and after that happens the problem is gone.
If the folder opens and explorer doesn't crash, then the only way I could fix this was to reboot, and after that it would be fine. By the way, when I open the folder, the window is completely black, and I cannot blindly click on the files nor can I rummage through them with my keyboard, etc. Another thing that this affects is the start menu. When I click the start menu, it is completely grey and partially transparent, like the top line of an explorer window (if settings are set to make it transparent). From there, I cannot select any file or option to open, and I cannot shut down, hibernate, log off, etc. from there. Basically, I want to know what is causing this to happen, how to prevent it, and what to do (other than reboot or force restart explorer.exe) when this happens again.
I have a Logitech optical mouse and I need it to be rt.click. Whenever I reboot, Vista Premium resets to default. It is o.k at the user window and almost at the end of the desktop b4 it resets. Vista also deletes my passwords in Outlook 2002/XP every bootup.But Vista Mail is untouched.
I am running Vista Home Premium x64. Everytime I bootup, the Language Pack removal service runs (as it is supposed to, apparently).
However, Vista seems to treat this as a significant system event, which triggers a restore point to be created. The restore point creation is slowing down access to my hard disk everytime I reboot.
When I look at the list of restore points that Vista has created, a restore point is created at every bootup due to the event “Uninstall: Language Pack Removal”. I can see the list by running “System Restore”, then selecting “choose another restore point” and clicking Next.
Any idea how to stop the restore point being created at every bootup? I assume there’s a good reason Vista runs the Language Pack removal service at every bootup, so I’d rather keep that running.
I also want a restore point created when there is a software install/uninstall, so want to keep the system restore service running, too.
After changing the bios settings for the pci-e freq and (dumb) the cpu voltage to 1.0 it doesnt do anything after saving and restarting .. it just powers on and nothing boots up, nothing onscreen at all (i made sure the monitor is hooked up right too) i didnt do anything other than the bios changes from when just before it worked fine. I changed those things to try and fix the stutter from the sound card. I made and tested a caldera dos boot CD disk with the asus flash utility but it wont boot it up. just runs with nothing happening.
i started noticing a vista hang after the bootup..it stays on the black screen for about a min before the logon screen, before this it was like 2 seconds...wat could be wrong?
It looks like after I was messing with the registry of my Acer Aspire 5720 I can't boot up properly :cry:.
After booting up I see the Windows Vista home premium text with Vista's blue/green background and only two buttons. On the left is Ease of Access and on the right is Shut Down/Restart/Sleep button.
I don't see the task bar, can't call the task manager with ctr-alt-del no Start button, no desktop icons.
The safe mode starts fine (I'm writing this while in safe mode with networking).
I've tried repair windows option with no luck.
Startup recovery says: Could not detect a problem
System restore says: No restore points have been created
Complete PC restore: No valid backup locations could be found
When I start command prompt it starts ok with x:windowssystem32 if not little strange since I don't have an X drive . I've tried unsuccesfully to start windows explorer by going to c: and typingexplorer.exe.
This all started after I uninstalled Logmein software, or rather after I deleted all the remains of logmein in registry after I uninstalled the software.
What program(s) poll the DVD drive at boot up, waking from sleep or restart? It has been determined that the drive [new] is sound and works as designed.
Think my HD may be failing. First, a few black screens have occurred on bootup. After normal shut down this A.M., it booted into the BIOS screen, after noisy boot. I simultaneously pressed Ctrl + Alt + Del expecting to get Task Manager. Got Advanced Options Menu. Pressed enter, booted to Windows normally. And just now, got louder than usual "whirring" noise on bootup, which went on to boot into Windows normally.
Question is: What would my options be if the Drive totally fails? I've got Personal Data saved. And all I have is Recovery Disks for this laptop. Would those be able to be installed on a new Drive if needed. I'm under the impression that I have a Smart Drive. Wouldn't that warn me if the Drive was failing? No warnings yet! And what type of Warning should I look for? So, how should I prepare for HD failure?
1 Vista Home Premium 32 PC 1 Vista Home Premium 64 PC
Cisco SD2008 Switch
1 HP 4050 Laserjet (Parallel connected to Vista 32 Machine above)
Configuration of Printer: Connected via parallel to Vista 32 machine Printer is configured for sharing and is installed on both machines test pages print successfully from both machines
Additional notes: During printer setup on the Vista 32 machine, I attempted to install additional 64x drivers, but could not locate them, so I skipped this step.
During printer setup on the Vista 64 machine, the shared printers were identified successfully, and I added the network printer. I was not asked to install drivers the way I have in the past when adding a local printer.
Printing using the shared printer on the local machine Vista 32 performs with normal speeds. Printing from the network computer Vista 64 using the shared printer installed on Vista 32 is extremely slow. Even typing in print job changes in the print dialog window takes 30 seconds or so for each key stroke to register a response onscreen.
I just bought a new laptop a Dell XPS 1330, with Vista. And it is slow in launching everything. Once I'm in a program, it's usually okay, but it takes 5-10 seconds just to open the start menu, or switch between programs, or open a program is more like 20-30 seconds. It's even slower if I'm coming out of sleep mode, it never gets faster, I always have to boot even though I see nothing in the task manager. Is this the way it is supposed to be, and if not, how can I tell if this is a Vista problem or the laptop? My cpu runs at about 3% capacity and my ram is around 50 when no applications are open.
My Vista x64 Ultimate was fast at first, but now after around 6months it has been slower. I have cleaned all Vista components and uninstalled unnecessary softwares/games. My HDD has 70% space remaining and its defragged. I have fast AVG antivirus and when I try to open a new folder, let's say my documents folder, it opens it fast but its all blank white and it keeps loading for like 3-5 seconds and then the contents show up. What's wrong? I expect an immediately folder content showing up especially when I have 3.55 GHz quad core and 8800 GTX T_T
I have found a solution for slow IE problem, it made my browsing extreamly faster. Tools-> manage add-ons-> enable or disable add-ons under enabled section look for "SSVHelperClass"(java plugin add-on) and highlight then click disable button. Restart IE and you could see the difference.
Since my CPU is 1333, if I install DDR-2 800 rams, my ratio will be 5:4 or something like that.
1. Will my rams slow down to the FSB of the CPU?
2. If yes, what is the point in installing faster rams if they are slowing down to the FSB of the CPU?
3. If there is a benefit, what is it?
4. If rams are faster, do they somehow increase the performance of the graphics cards? (For, both ATI and NVIDIA make use of the system ram Hyper Memory and Turbo Cache)
5. Wouldn't it be effected by CPU's FSB? Lets say you have a DDR-4 graphics card, and your rams are DDR-2 800, rams are slower than the card, and CPU is slower than both of them.
I purchased my system (Laptop, dual core HP Paviolion dv6700) and installed vista home premium in December 2008. In the beginning system's performance was good but now (within 6 months) it starts so slow. What may be the problem.
I searched for "IE8" and it said no results...find that a little hard to believe
Anyways, odd problem to have. After being logged into Winders for a little while, doing some surfing, etc., I'll go to close IE8, click the red x, and it'll just sit there for 5-6 seconds, and then finally close. If I log off and log back on, it'll behave properly, but sooner or later will start to act up again.
Anyone else run into this? I'm running IE7Pro, but I've been running that for a while now and this has only recently popped up.
I have a Sony Vaio VGN-FZ11S, with Vista Home 32. The laptop has a Core 2 Duo T7100 @1.8GHz and 2Gb RAM. I run Office 2007, Dreamweaver, Flash, Fireworks, Corel, etc... Sometimes the machine becomes so slow I almost fall asleep (literally!) while waiting for it do perform a simple task such as opening IE or showing a menu or opening an email message. I should add that my PST has 5.6 Gb. I'd like to reduce its size, although I don't think it is the cause of the slow running, but I need to keep many emails... I have talked with Sony and they simply refuse to let their customers downgrade to Xp. So, besides tweaking (which I don't know how to), what can I do to my laptop to avoid these episodes of EXTREMELY slow running?
