Black Screen: Vista Hang After The Bootup
Nov 24, 2007i started noticing a vista hang after the bootup..it stays on the black screen for about a min before the logon screen, before this it was like 2 seconds...wat could be wrong?
View 4 Replies
ADVERTISEMENT
Hard Drive Failure: Black Screens Have Occurred On Bootup?
Mar 24, 2010Think my HD may be failing. First, a few black screens have occurred on bootup. After normal shut down this A.M., it booted into the BIOS screen, after noisy boot. I simultaneously pressed Ctrl + Alt + Del expecting to get Task Manager. Got Advanced Options Menu. Pressed enter, booted to Windows normally. And just now, got louder than usual "whirring" noise on bootup, which went on to boot into Windows normally.
Question is: What would my options be if the Drive totally fails? I've got Personal Data saved. And all I have is Recovery Disks for this laptop. Would those be able to be installed on a new Drive if needed. I'm under the impression that I have a Smart Drive. Wouldn't that warn me if the Drive was failing? No warnings yet! And what type of Warning should I look for? So, how should I prepare for HD failure?
Graphic Card: Computer Freeze For 2-5 Second, Next Is Black Screen For 2seconds(as Monitor Is Shuted Down) And Next Is Black Screen While I Don't Stop The Game
Mar 15, 2008I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies View RelatedVista Not Booting, Black Screen
Nov 16, 2008Vista not booting if the computer wasn't shut down right? It will boot till a black screen with only the mouse curser (mouse curser won't move though). I can get into safe mode and have always just did a system restore to an earlier time, but this time, even when sent back to the earliest point it still wont boot. I have Vista 32bit, have added no new programs, and am caught up with the upgrades (but added none recently enough for it to have caused it).
Does anyone know how I can repair the boot info without having to reinstall windows. I have already got ahold of the boot disk but that didnt fix anything. I guess it at least gets into windows but one of the first startup stuff is corrupt.
Vista Black Screen Of Death
Jul 29, 2009It's called a Black Screen of Death (KSOD) Apparently this is associated with Vista Premium and Dell computers. When she turns her computer on it starts up fine. The Lil green vista bar comes up and such. But after that no start up noise. No nothing just pitch black. You can see your mouse cursor though Tried the methods that were listed on this site : 'Fix for Windows.Vista Black Screen of Death, aka KSOD ? the back room tech'.....
View 7 Replies View RelatedInstall Forsaken On Vista 64bit Screen Black
Mar 19, 2008I'm trying to install Forsaken on Windows Vista 64bit and the screen just blacks out after the intro messages. It works fine on XP even though its an old game. I've tried right-clicking on the .exe files and setting compatability to Windows 95, 98 and 2000 and nothing changes. I used to love this game, does anyone know how to get it working?
View 4 Replies View RelatedBootup - What's Normal Screen Logo?
Mar 24, 2008I've checked and General is "normal" and boot is not ticked.I get about 15 secs of blackness, 5 secs of progress bar at the bottom,another 10 secs of blackness and then Vista.If I tick no gui in boot, I get "aurora" for the whole duration with no progress bar.
Bootup: F2 Setup Screen Does Several Loading Bar
Apr 14, 2010It boots on the F2 setup screen does several seconds of the loading bar, then my screen says 'no signal' and it goes back to the F2 setup screen and freezes. Then I have to turn of my computer by holding down the power button and start it again the second time where it boots fine.
View 5 Replies View RelatedScreen Randomly Scrambles Not Bootup
Jul 29, 2009I've been trying to find an issue for, but so far I have not found a thread anywhere on the internet that even addressed my problem precisely. Occasionally, usually after my computer has been running awhile, my screen will randomly scramble up, and parts of it will become inoperable. There are no "black lines" going across the screen, and my screen hasn't "rotated"; parts of the screen shift up, down, left, or right, but nothing is covered by lines or rotated. I don't believe this to be a problem with my monitor. My reason to believe this is because sometimes, when I open a folder from my desktop, Windows Explorer (explorer.exe) will crash and restart, and after that happens the problem is gone.
If the folder opens and explorer doesn't crash, then the only way I could fix this was to reboot, and after that it would be fine. By the way, when I open the folder, the window is completely black, and I cannot blindly click on the files nor can I rummage through them with my keyboard, etc. Another thing that this affects is the start menu. When I click the start menu, it is completely grey and partially transparent, like the top line of an explorer window (if settings are set to make it transparent). From there, I cannot select any file or option to open, and I cannot shut down, hibernate, log off, etc. from there. Basically, I want to know what is causing this to happen, how to prevent it, and what to do (other than reboot or force restart explorer.exe) when this happens again.
Vista Boots From The Cd It Goes To A Windows Is Setting Up Files,then Goes To A Black Screen Where There Is A Lilttle Green Bar Moving
Jul 4, 2008Once vista boots from the cd it goes to a windows is setting up files,then goes to a black screen where there is a lilttle green bar moving. Now right after that it goes to a blueish screen where there is just the mouse cursor on the screen and just stays there? This is on all new hardware. Also this is a sata hard drive,
View 9 Replies View RelatedInstall Sp1 For Vista Ulitmate 64 Bit I Allways Get A White Or Black Screen When It Reaches Installing Stage 2 Of 3
Nov 10, 2008Everytime i try and install sp1 for vista ulitmate 64 bit i allways get a white or black screen when it reaches installing stage 2 of 3.
View 9 Replies View RelatedVista Also Delectes Password Bootup
Mar 23, 2008I have a Logitech optical mouse and I need it to be rt.click. Whenever I reboot, Vista Premium resets to default. It is o.k at the user window and almost at the end of the desktop b4 it resets. Vista also deletes my passwords in Outlook 2002/XP every bootup.But Vista Mail is untouched.
View 4 Replies View RelatedInstall :: Oading Files Screen And Then Screen In Getting Black
Mar 24, 2008I am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
Running The Screen Not Centred & Black Bar On Right Of Screen
May 14, 2008I have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.
View 7 Replies View RelatedScreen Saver To Black Unresponsive Screen
May 2, 2009I am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.
View 5 Replies View RelatedBoot: Screen Hangs On A Black Screen
Nov 13, 2007i went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.
View 7 Replies View RelatedBlue Screen Of Death, Screen Going Black
Nov 19, 2009Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
Should Not Black Screen Full Screen Mode
Oct 5, 2009Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).
View 4 Replies View RelatedVista Startup: After Two Minutes I Get The Welcome Screen. Then The Monitor Goes Black For A Full Two Minutes Before Continuing The Startup Process
Mar 23, 2008I have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and
comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
Cannot Log-on And Black Screen
Jan 30, 2010windows seems to boot up partially but does not get to the log-on screen and instead goes to a black screen and all you can see is the arrow shaped mouse pointer and thats all. I put the windows cd in to try to repair the installation and booted from that but still the same thing happens
View 6 Replies View RelatedScreen Is Black
Apr 21, 2009Alrighty I went off to work with my pc turned on a few days ago, I come back and the screen is black and nothing I do is responsive to the screen. I then reboot the Pc it leading to a blue screen. Some times when I reboot it will blue screen some times it will just be a black screen that is un responsive. I have tried f8 options in advance boot optiotns, Ive tried re installing windows- it claiming my disk is full. Ive tried system restore it also says I have a disk failure. It wont let me check errors in the properties options on my hard drive. I have done a virus scan(no virus's) and I have 300gigs left of space.
View 8 Replies View RelatedScreen Becomes Black
Jul 21, 2008is that when he tries to delete some files that he previously stored in the C:"Account Name",he gets a message saying that the file is unavailable in the specified location.However,that is not my main problem now,because when I was trying to help fix this problem I typed "msconfig" into the RUN box to get the startup utility box and I unchecked some of the background programs to prevent them from loading automatically when the system starts,in order to speed up the system;but when I restarted the system I can see the first screen, which is by the manufacturer of the labtop;then when vista starts loading, the screen becomes black and don't display anything,although I am sure that Vista is loading successfully but I cannot see it on the screen.
I am assuming that one of the programs that I have unchecked is responsible for displaying. I have tried to do a repair installation by using a bootable Vista DVD but I couldn't because I cannot see anything on the screen.I tried logging in on safe mode but that did not work either. How can I undo the changes that I have made to startup utility.
Black Screen After Log In
Jun 12, 2010I have two users set-up, user K (with Administrator rights I believe and a password) and user N. If I login as user K, after I enter my password my computer will run for a bit (I can see/hear it logging in) but after a few minutes the screen goes black except for my white cursor and nothing else happens. If I then hit ctrl-alt-del I can see the Task Manager and switch users to user N which will start up normally and give me access to my desktop.
View 4 Replies View RelatedBlack Screen With Games
Jun 27, 2009I have tried installing many different games on my pc, which are quite new and have been released in the last few years. The installation goes fine, and everything is great. When it comes to launching the game, well, i double click the file to run the game, and i get a black screen. Nothing happens afterwards. It just stays black. 'Ctrl + Alt + Delete' does not work, and neither does 'Alt + Tab', or any other keyboard shortcuts. This results in me having to hold in the power button and turn my pc off like that.
Any idea's on what could be wrong? It is extremely frustrating, due to the fact that i've tried running about 3 - 5 games on my computer, and neither of them work, without a black screen coming up after trying to launch any of them. I've tried numerous things like 'Running as Administrator' and changing compatibillity modes and so on and so forth, but none of that works.
XFX 680i SLI Screen Going Black
Apr 26, 2008I was having a weird problem with my screen going black at random after installing any version of Vista, and kept having to force a restart because there was no way to get the screen to come back on. I searched all the forums and it seemed to be very common, but as with most of the forums everyone was argueing about how to fix the problem instead of helping the people with the problem. So I'm posting this one in the hope that it may just help one or two people with the same problem.
My remedy was simply to update the BIOS to the latest version P32 I think from the XFX website, and the problem was no more, I also updated the High def audio driver from the same site, now my machine has been running flawlessly for three days now.
Black Screen After Loading Bar
Jan 18, 2010I was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies View RelatedBlack Screen Right After Bios.
Jun 18, 2008I have Vista Ulimate 64-bit and everytime that I reboot I get a black screen before the Microsoft Windows scrolling bar.
This is the sequence.
- I reboot.
- I get my bios information screen.
- I get the white, blinking line in the upper left corner of the screen.
- Then the screen goes black with no hard drive activity.
I then can perform a Complete PC restore from my second partition on the same SATA Hard Drive and I will then be able to boot into Vista with no problem.....until I reboot, then I get the Black screen again. It is a vicious cycle.
I have tried to remove video cards (2 x 8800 GTS), memory (4 GB), sound cards (X-Fi Music), load the default bios settings....nothing works. Only a Complete PC Restore cures it, but only until I need to reboot the PC.
Screen Goes And Stay Black
Oct 8, 2009I run Vista HP/SP2. The other day after various installs, updates and maintenance tasks I ran with no problems and ended the day by putting my laptop into hibernate mode. The next day when I powered on, my system would not come up...my system disk C: was corrupt. I finally got System Repair to run and it appeared to fix and recover my C: disk to the point that I can see my files still exist via Recovery command prompt. However when I
restart, my screen goes and stays blank (black) with my cursor usable but to no purpose. I tried System Repair again but it tells me it can find nothing to repair. I tried starting in safe mode and it loads two screens worth of windows files before going to a blank (black) screen with my cursor usable but to no purpose. The last windows file loaded is a crcdisk driver file.
Black Screen After Login
Mar 27, 2009When I login all I get is a black screen and "my documents" is open. Basically, the OS has GONE! I can still use the computer, ctrl alt delete etc.. run tasks, just that there is no desktop or toolbars etc.
View 5 Replies View RelatedBlack Frame Around Screen
Nov 13, 2008I need desperately answer,no one found the solution no one. I have my Ati Radeon HD 3870X2 series connected (hdmi to hdmi) to my Samsung LE40A656F1. But when i set a game to 1920x1080 resolution there is a black frame around the screen. If i use an other resolution like 1360x768 there is no a black frame. I always use the latest drivers and hotfix for my graphic card.
Black frame i mean black (empty)frame around the screen. My graphic card is 1080p capable. My tv is 1080p capable. For now i test it with FarCry2,Sacred 2,Fallout 3,Dead Space,those games natively supports a resolution of 1920x1080p. But i still get the black frame when i set the game resolution to 1920x1080p...........
32 Bit Black Screen On Boot.
Nov 18, 2008I've had an issue with my computer booting properly. I went from a 1:05 boot time to over a 2:00 boot because Vista go's to a black screen instead of loading my desktop. I'm not sure where to start fixing this, I've always been good with computers and have tried all the text book fixes and I have no where left to go. I made a video which is uploading now and will be up incase this doesn't make as much sense as I'd hope. All my drivers are up to date.
View 7 Replies View Related
