Once vista boots from the cd it goes to a windows is setting up files,then goes to a black screen where there is a lilttle green bar moving. Now right after that it goes to a blueish screen where there is just the mouse cursor on the screen and just stays there? This is on all new hardware. Also this is a sata hard drive,
View 9 RepliesA few days ago my display settings would not save and each time I restarted my computer they were different. I thought it would not get any worse however now when i start my computer the screen goes black just after the green loading bar. The computer is still on because it makes hard drive noises and my quickplay buttons are blue but the computer does not respond. It starts in safemode but it won't start normally. I have Vista Home Premium 32 Bit with Service Pack 1. Any help would be greatly appreciated to get rid of this black screen.
View 4 Replies View RelatedI've recently got attacked by some sort of virus malware and my AVG instantly asked me to reboot. After I rebooted and loaded the green loading bar, my entire screen turned black without the windows badge.When I clicked on the restart button, I'm able to get inside safe mode, network and command prompt but not start windows normally.. I've also tried chkdsk command but it showed 0 bad file.
View 4 Replies View RelatedHP Laptop running Ultimate....Everything was fine yesterday - attempted to load a .cue file with MagicISO and computer froze.. no biggie went to restart - got the loading shot (green night rider bar) and then black screen of death. Restart - tried all safe modes but will not pass crcdisk.sys..... Attemoted to start from dvd - finally got that working - Go in to repair mode - it finds Vista on by C: parition - scans for problems but can't fix them.. Try system restore - says there are none - which isn't true...tried the command prompt and did bootrec /fixmbr and /fixboot still no change..... I even attempted to do a clean upgrade over the old one, but of course the upgrade option is grayed out...
View 4 Replies View RelatedI have a Toshiba Satellite L300D -01Q (PSLC0C-01Q08C) that is running Vista Home Premium (SP unknown). The kernel completely loads to a black screen (active / backlit black) with only a moveable mouse pointer. None of the Recovery Options have helped and I can't do an Upgrade Install because I can't get to the GUI.
My priority and objective is to save this system and preserve files, programs and settings. I read Brink's How to Repair and Verify the Integrity of Vista System Files with System File Checker and I'd like to try sfc /scannow, however, I get the following:........
Last night my pc was running fine and just before I went for some shut eye put my pc into sleep mode today I woke my pc only for it not to allow me to log on, mouse movement only nothing was clickable so after a short while I decided to reset upon boot I got the green loading bar but then a black screen after about 20 mins I gave up and tried a restore last good config.... Yeah nice one it bsod on me At 55% chkdsk and now I get a windows boot manager error file: ootcd
I tried Bootrec /RebuildBcd but it brings back an error that it can not create the new file as the file already exists. I'm not having much luck with the recovery disk for repair options as it can't seem to find the OS and brings back errors of can not recover everything seems on a go slow and ubuntu can't find my c drive even tried spin right and that can't recover a bad sector I'm at a loss as to what to do befor the fresh install option I'm on my last option to try use a back up store disk
after my computer boots it gets stuck on a black screen with a mouse cursor in the middle. I have been researching and reading for a solution but have not found one that works for me. I can't boot into safe mode or even safe mode with command prompt so i cant do any registry fixes which some people suggest. Iv also tried last known good configuration but that didnt work either. ctrl + alt + delete doesn't work either. iv tried doing a clean install and using the windows diagnostics and recovery toolset version 6. but they havnt worked either after the loading files bar the KSOD comes back again, it is like the computer cannot read the discs or it wont boot from them.
View 4 Replies View Relatedi was updating drivers for my motherboard when my desktop froze and i was forced to manually reset, after the reset the computer restarted normally but it was slow on logon and it was weird since it always acts fast, i tryed to finish installing the drivers and it froze up again! so again i restarted, when i did... BLACK SCREEN OF DEATH!!!
when i try to reboot i get the boot choices (start windows normally, safe mode...) and none of them work! is all the same black screen with the cursor, i dnt get a choice of "last good known configuration" either, i tryed pressing ctrl-alt-del and nothing happens! does anyone know how to solve this problem without reinstalling windows? i have 300GB worth of stuff i dont wanna loose!
I tryed the windows vista disc repair procedure and it tells me it cant fix the problem, i try system restore and it tells me there is no restore points set, which it cant be true because a few days ago i opened system restore and saw tons of restore points from before.
Wondering if anyone has a suggestion. When importing a DVR-MS file recorded using Windows Media Center into Windows Movie Maker, in order to convert it to a more compact WMV file, a green screen shows up in the preview pane on the right-hand side. The audio works -- but only green shows.
It's strange because the DVR-MS file plays fine within Windows Media Center.
System is a Dell XPS 410 running an ATI Radeon x1600 pro with the latest Certified driver from Windows Update (8.391.0.0 dated 6/26/2007).
There is a later driver available from ATI, 8.9, but before taking the risk up upgrading the driver, wonder if there's another setting that may be causing the green screen?
I have a compaq presario SR5310F w/ vista home premium 32 bit 08 model. Was working perfectly for two days after being stored 18 months. suddenly it now boots up to a green tint screen with faint, hardly readable characters.
View 9 Replies View RelatedI am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies View RelatedI very recently purchased a Compal KHLB2. I inserted the Vista Ultimate x64 disk and went to work installing it. It goes through the initial process just fine, copying the files, expanding and whatnot. However, after it has to restart it will go to the part where the screen is black with the words "Please wait while Windows sets up your computer...", finally make it past that and then get back to the Installing Windows Vista Ultimate x64 page. It will then stay on Copying Vista Ultimate x64 files for a bit and then blue-screen me. Under Technical Information is tells me 0x00000124.
View 7 Replies View RelatedI'm trying to move files by dragging a folder from the right-hand pane in Windows Explorer (Vista Business) to a different folder in the left-hand 'Folders' pane and every time I try this, Explorer stops working and re-starts. If I copy and paste the folders it doesn't seem to cause this problem, although even then, I have to [right click and 'Paste'] twice in the new folder - the first 'Paste' instruction never produces any effect. Should I be able to drag them? Why does 'Paste' require two attempts every time?
View 5 Replies View RelatedI reboot the computer, boot from DVD.
I get the screen that says "Windows is loading files", and then I get the screen with the loading bar at the bottom (the one that looks a bit like the standard Windows XP loading bar) and then the screen goes black and nothing happens. I've tried leaving it for a good half hour, still to no avail.
A long time ago I installed an evaluation version of Windows Vista on the second partition of my pc, next to my installation of Windows XP (dual boot partition C and L). The evaluation period has long since expired and I am no longer using Vista. However, all the files are still present on my second partition, and every time I start my pc, the boot menu will come up. What do I need to do to completely remove all the files that belong to Windows Vista and make sure that my system boots straight into Windows XP,without stopping for the boot menu?
View 6 Replies View RelatedVista not booting if the computer wasn't shut down right? It will boot till a black screen with only the mouse curser (mouse curser won't move though). I can get into safe mode and have always just did a system restore to an earlier time, but this time, even when sent back to the earliest point it still wont boot. I have Vista 32bit, have added no new programs, and am caught up with the upgrades (but added none recently enough for it to have caused it).
Does anyone know how I can repair the boot info without having to reinstall windows. I have already got ahold of the boot disk but that didnt fix anything. I guess it at least gets into windows but one of the first startup stuff is corrupt.
It's called a Black Screen of Death (KSOD) Apparently this is associated with Vista Premium and Dell computers. When she turns her computer on it starts up fine. The Lil green vista bar comes up and such. But after that no start up noise. No nothing just pitch black. You can see your mouse cursor though Tried the methods that were listed on this site : 'Fix for Windows.Vista Black Screen of Death, aka KSOD ? the back room tech'.....
View 7 Replies View Relatedi started noticing a vista hang after the bootup..it stays on the black screen for about a min before the logon screen, before this it was like 2 seconds...wat could be wrong?
View 4 Replies View RelatedI'm trying to install Forsaken on Windows Vista 64bit and the screen just blacks out after the intro messages. It works fine on XP even though its an old game. I've tried right-clicking on the .exe files and setting compatability to Windows 95, 98 and 2000 and nothing changes. I used to love this game, does anyone know how to get it working?
View 4 Replies View RelatedI was working on my laptop earlier this evening moving a few files around and organising my folders when I lost a few files from a folder. I don't know exactly what happened, I probably mashed the touch pad. Anyway, now I can't find the files anymore. I've tried running a search but it has come to no avail. How do I find my files? If it makes any difference the files were on a memory stick.
View 9 Replies View Relatedwhere it boots up to the loading screen is fine, slows down and stops, then it will bring me to blue screen and restart to the point where it has black screen telling me boot up was unsuccessful, and i can go into all 3 safe modes or boot normally, have tried all of them and non of them even boot
View 6 Replies View RelatedI have scheduled a chkdsk to take place the next time I restart my computer and when I restarted it, the problem started! After the Boot Screen finished booting nothing happens, the screen stays blank. I have left it for hours and still nothing happens. How can I solve this problem? I also wanted to mention that I have changed my boot screen using this tutorial. I didn't really have any problem after following that tutorial but I only wanted to mention that...
View 4 Replies View RelatedEverytime i try and install sp1 for vista ulitmate 64 bit i allways get a white or black screen when it reaches installing stage 2 of 3.
View 9 Replies View RelatedI have a problem with Vista. When I start my computer, it displays a black screen for a couple of minutes before starting to load Vista. I don't really know what to say more, since I'm totally clueless with this one. What I've tried to do, is to update my drivers. I've also updated my BIOS. What should I try next?
View 9 Replies View RelatedMy computer recently started crashing, mostly during video games (Crysis, Call of Duty 4), and occasionaly during a movie. The screen goes black, then fills with vertical pinstrips over the entire screen, and the sound 'freezes' like a skipping CD, repeating what was last said or heard over and over rapidly. Ok,... recent changes i've made. I've had a new video card for about a month, but everything worked fine until a week ago.
I installed the two above mentioned video games, which use punkbuster, a product I have no experience with. Incidentaly, the problems began about the time I started using punkbuster. However, I restored the system to a point previous to the punk buster installation, and the system is still crashing. Is it my new video card (ATI Radeon B2 512 HD 2600 xt PCI), or something else.
my problem being stuck at the blue/green screen while making a new fresh install.) Well I first signed up because I have was having install problems. When it got to the blue/green screen it wouldnt do anything. But what do u know.. right when I was typing this it starts to load and Im now on my way installing windows vista 64 bit! (cause I just recently bought 8gb of memory) Well... I guess I would explain my story since Im a newbie... and something for you guys to read.. Well my computer really needed a new HDD because for some reason my old one would always get curupted after like so many months... about 2-3 months? I was wow **** this. I wasnt sure why it was doing this. But my computer was only on a surge so I think maybe a couple power outages ****ed it up. (I already fixed that problem though, just bought a battery from newegg.com, when I bought more things, like my new hdd, memory, mouse and mouse pad.)
so finally my memory and windows vista x64 bit dvd came into the mail. As soon as I got em... I installed the memory then I wanted to upgrade my version of windows xp 32bit (I must say a really good OS at the moment, till when windows 7 comes out) So I tried just throwing in the cd and found out I couldnt upgrade that way. Because I got an error that said "somethin, cant remember the full message but bascially because I couldnt run 64bit dvd when I have 32bit" so no biggie right? Then I was like ok well I can just install it by booting up. I got passed the part that said "Now loading windows vista files" alright not bad... so far so good. But damn I was wrong when I got to the blue/green background. I noticed the dvd wasn't spinning my computer was just sitting there. It was frozen though since I could still move the mouse. So I was like oh man... cmon vista... Well I waited a little bit not to much though cause I think it should just pop up and start working. It wasnt doing that so I knew something was wrong......
My Toshiba Labtop has crashed.I think a shared file was deleted. Labtop was operating under Windows Vista Home Premium 64 bit.It happened right after uninstalling Java; because the dang updates kept popping up and it was getting annoying. Now whenever i start it, it comes to a black screen and a minute later a cursor pops up. Safe mode does not work.I have tried the recovery disk, but to no avail.I know im doing right because i purchased some Boots Disks off ebay and they come right up (PC wizard; Pc doctor).So i bought Windows Vista Ultimate and tried to install and i cant get to install thru boot.I ither need to know how to install windows thru boot, but id much rather just fix current windows.
View 4 Replies View Relatedall day I've been trying to sort this out but to no avail. I've searched Google like crazy, and whilst I've found that others have had this issue there's been no real resolution. My system boots all the way up to the point of the loading bar, then it goes blue screen and restarts. I've found that it loads up in safe mode, and I can access all my drives (I've tried unplugging external devices), and I'm 99% certain that running a system restore would fix the issue. HOWEVER, safe mode revokes me of all rights to perform any system based tasks, so obviously it won't allow me to run system restore, regedit, pretty much anything. Here's what I've tried so far:
-Running system repair through a boot disk, it didn't find anything wrong
-I tried running system restore through the boot disk but apparently there weren't any restore files (which isn't true)
I've had my HP laptop for almost about a year, and two days ago I started it up and logged in. Once logged in the screen went completely black except for the cursor. No message, no text, just black with a cursor. At first I thought it was a crash, but after several reboots still nothing. Eventually I tried Ctrl-Alt-Delete and got task manager, and then managed to get some apps up including a web browser. This doesn't sound like the descriptions of reduced functionalty mode I've read here and elsewhere. Is it? I tried going back to the oldest restore point, 2 weeks ago (I've had two auto-updates since then) but no change. Also tried running slui.exe as was suggested in anothe post here and all it says is "Activation Successful".What's going on and how can I get my system back?
View 7 Replies View RelatedI've been running Vista for a few months now without much complaint until recently. After booting, the green loading bar is followed by the windows logo before the screen flickers several dark colors and then produces a black screen with a movable cursor. The hard drive light remains unlit after the black screen. Running in safe mode gives the same result. I do not have a repair disk and I would rather not wipe the hard drive with a factory default disk as I have important data on my hard disk.
View 7 Replies View Related