Vista Not Booting, Black Screen
Nov 16, 2008
Vista not booting if the computer wasn't shut down right? It will boot till a black screen with only the mouse curser (mouse curser won't move though). I can get into safe mode and have always just did a system restore to an earlier time, but this time, even when sent back to the earliest point it still wont boot. I have Vista 32bit, have added no new programs, and am caught up with the upgrades (but added none recently enough for it to have caused it).
Does anyone know how I can repair the boot info without having to reinstall windows. I have already got ahold of the boot disk but that didnt fix anything. I guess it at least gets into windows but one of the first startup stuff is corrupt.
View 8 Replies
ADVERTISEMENT
Sep 4, 2009
There are many problems regarding black screen on boot. I've researched and surfed for over 4 hours, that is not an exaggeration, but found no use. When the vista passes log-on screen then it is time ti display desktop on boot, there simply shows a black screen with mouse cursor at the center.
Task manager works, and it seems nothing is using huge system resource at that time. After few amount of time, the desktop finally appears. I never installed driver, but in case one of them got corrupted, I installed the same version again to try to resolve the problem. It was no use. It's a OEM version that came with my laptop and this laptop has no pirated software. Not a single one
View 5 Replies
View Related
Dec 10, 2009
I have a problem with my Laptop when I restart the OS. It uses Windows Vista Home Premium 32 bit. The desktop is not appeared, it is fully blank of black, except 'My Documents' of windows explorer. I found this problem since I had a message from someone (via Yahoo Messenger) that share a link.. I didn't know whether it is a virus or not, but accidentally I opened the URL and extracted the file attached.. Unfortunately, when I restart the Operating System, I got a black screen with a Documents of window explorer..
I have tried the methods that has been posted in this forum with the topic search 'black screen of death', and another additional methods, except re-install OS; but there is no changes till now.. When I tried to create a new user account, it ran normally if using the new account; but when I got back to my infected account it still displayed black screen.. I'm afraid I could not re-install it, because it will need a hard configuration,..
Now, I really confuse what should I do to make it runs well? My temporary plan is to use another new account and run with it normally, but I wonder with my infected account, what happened with the infected account; Is there any possibility that the infected account will influence my new account or any related system programs? Is this the only available and safe way to run my OS well?
View 4 Replies
View Related
Mar 25, 2009
Upon restarting my Laptop I get a black screen with a blinking cursor in the upper right corner of my screen. I can not get into safe mode, I tried Vista recovery tools (System restore, Startup repair (shows no problems). I do not have any external hardware plugged in and have not installed any new hardware. I am able to access my hard drive and back up small amounts of data through my backup software which is on disk.
View 4 Replies
View Related
Sep 14, 2008
I have the gigabyte eP45-DQ6 motherboard. When booting up, or rebooting, even before I get to the windows loading screen, I get a black screen. Almost like the monitor doesnt turn on but the computer sounds likes on. I reinstalled due to some other issues, but the same issue with loading happens. ITs sporadic. Sometimes it does it, others not. I updated to v11 of BIOS, and it still does it. Otherwise its very stable. Is there a setting in the motherboard? Is it vista related?
View 9 Replies
View Related
Mar 15, 2008
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies
View Related
Jul 29, 2009
It's called a Black Screen of Death (KSOD) Apparently this is associated with Vista Premium and Dell computers. When she turns her computer on it starts up fine. The Lil green vista bar comes up and such. But after that no start up noise. No nothing just pitch black. You can see your mouse cursor though Tried the methods that were listed on this site : 'Fix for Windows.Vista Black Screen of Death, aka KSOD ? the back room tech'.....
View 7 Replies
View Related
Nov 24, 2007
i started noticing a vista hang after the bootup..it stays on the black screen for about a min before the logon screen, before this it was like 2 seconds...wat could be wrong?
View 4 Replies
View Related
Mar 19, 2008
I'm trying to install Forsaken on Windows Vista 64bit and the screen just blacks out after the intro messages. It works fine on XP even though its an old game. I've tried right-clicking on the .exe files and setting compatability to Windows 95, 98 and 2000 and nothing changes. I used to love this game, does anyone know how to get it working?
View 4 Replies
View Related
Jul 4, 2008
Once vista boots from the cd it goes to a windows is setting up files,then goes to a black screen where there is a lilttle green bar moving. Now right after that it goes to a blueish screen where there is just the mouse cursor on the screen and just stays there? This is on all new hardware. Also this is a sata hard drive,
View 9 Replies
View Related
Nov 10, 2008
Everytime i try and install sp1 for vista ulitmate 64 bit i allways get a white or black screen when it reaches installing stage 2 of 3.
View 9 Replies
View Related
Mar 24, 2008
I am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
View 9 Replies
View Related
Dec 29, 2009
one day my pc was doing a disk check after after the booting screen, then I suddenly stupidity press the restart button it boot then after the vista loading bar, it came with this of blue screen, A problem has been detected and windows has been shut down to prevent damage to you computer. A process or thread crucial to system operation has unexpectedly exited or been terminated. If this is the first time........If problem continues, disable.........Technical information:*** STOP: 0x000000F4 (0x00000003,0x860FD020,0x860FD16C,0x8268A430)
I tried restart several times but no work,i tap F8 and tried all 3 safe modes option, but it freeze or come out this similar bsod above, i tried last known good configuration (AVCND) and Directory services restore mode but same bsod or black screen freeze. Same as the debugging mode.My pc does not have a start up repair so i use my Toshiba laptop recovery disk, so here it goes, After boot screen, then Windows is loading files bar probably the disc then after the loading bar, I go to system recovery options, then it automatically searching for problems in startup rep Then a pop up that it says Start up repair cannot repair this computer automatically, in the problem details show up this,
Problem signature:
Problem Event Name: StartupRepairV2
Problem Signature 01: ExternalMedia
Problem Signature 02: 6.0.6001.18000.6.0.6001.18000
Problem Signature 03: 6
Problem Signature 04: 851981......
after the pop up, it tells me I had device attached recently, but there is no mic, speaker, usb thingys and network plug out before that!! Only mouse, keyboard, cd dvd drive, screen and remember this problem was when disck check cancel, see first paragraph of this post.
View 4 Replies
View Related
Jun 30, 2009
I moved in with a host family last week, and 5 minutes after getting the internet to work and beginning to Skype chat people (without video) my computer (Gateway laptop model MT3423 I think, Vista Premium, Dual Core AMD Turion, ~2 years old in good condition) froze and hasn't been the same since. Now, booting brings me to the recovery screen (of course - Normal Mode, Safe Mode with Networking, etc.), but no Safe Mode works - I can get to the login screen but after signing in the Welcome screen with the loading circle stays up indefinitely. Normal Mode works though, but it has major issues. After successfully signing in programs begin to load but it quickly slows down to a crawl, and takes about a minute to close the two program warning boxes that pop up (just the usual 'this program is unregistered' sort of thing). After this, Windows Calendar inexplicably loads, again painfully slow, and if the computer hasn't crashed by this point then it does shortly thereafter. And the crash varies - a few times it started with a "Server Busy - this action cannot be completed" error message but it usually says euphemistically "Microsoft Windows - this application is not responding."
I've tried several things but I haven't had any success. During this loading window, I've tried running msconfig and unchecking nonessential programs, but even after clicking Save Changes and Restart the changes are not saved, and it'll still proceed to crash and load the programs again next boot. I've tried loading the control panel, but it becomes unresponsive after I try to click anything in it. I tried opening accessories under the Start Menu and it bugged out, and instead of showing the folder icon it showed a searching icon and wouldn't open. The Command Prompt loaded but was too slow to execute anything. I also tried opening Task Manager, even through Ctrl+Alt+Delete, and after a few minutes it successfully loaded once but didn't show anything unusual and then crashed.
View 9 Replies
View Related
May 14, 2008
I have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.
View 7 Replies
View Related
May 2, 2009
I am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.
View 5 Replies
View Related
Nov 13, 2007
i went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.
View 7 Replies
View Related
Nov 19, 2009
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
View 4 Replies
View Related
Oct 5, 2009
Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).
View 4 Replies
View Related
Mar 23, 2008
I have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and
comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
View 9 Replies
View Related
Feb 1, 2010
I am trying to fix a laptop.. it is getting blue screen.. things i did
1. Replace ram
2. Tried booting on safe mode/ last good configuration both didn't work
When I put a windows cd for repair (windows XP Home) and boot from cd.. its goes on the window where I need to select 1.c:windows but when i select that.. it goes on blue screen again.. I removed the hard disk.. connect it externally and ran a chkdsk /r and chkdsk /f then put it back to the laptop still didnt work..
View 9 Replies
View Related
Jun 3, 2008
I've just started having boot problems with Vista. I've had no problems in the past, but earlier this evening it would restart itself while loading Vista (the green bar loading stage). I used the Startup Repair option from the Vista install disc, and the log shows it successfully repaired a corrupted system volume (exact wording may have been different). Now it boots as far as loading a black screen and the mouse cursor, but doesn't get to the Aurora (blue-Vista-Windows-logo-loading thing). I have tried subsequent Startup Repairs, CHKDSKs, Memory Diagnostic checks, all with no errors to report. Unfortunately, I disabled System Restore a while back... Something I now regret doing! At least I know what I'll be doing as soon as I get it running again! My system is an ASUS M2N-E motherboard, AMD Athlon64 X2 6000+, Corsair 2x1GB XMS2 RAM, Sapphire ATi Radeon 3850... And so on and so forth. I'm running Vista Ultimate 32bit as well.
View 9 Replies
View Related
Jan 30, 2010
windows seems to boot up partially but does not get to the log-on screen and instead goes to a black screen and all you can see is the arrow shaped mouse pointer and thats all. I put the windows cd in to try to repair the installation and booted from that but still the same thing happens
View 6 Replies
View Related
Apr 21, 2009
Alrighty I went off to work with my pc turned on a few days ago, I come back and the screen is black and nothing I do is responsive to the screen. I then reboot the Pc it leading to a blue screen. Some times when I reboot it will blue screen some times it will just be a black screen that is un responsive. I have tried f8 options in advance boot optiotns, Ive tried re installing windows- it claiming my disk is full. Ive tried system restore it also says I have a disk failure. It wont let me check errors in the properties options on my hard drive. I have done a virus scan(no virus's) and I have 300gigs left of space.
View 8 Replies
View Related
Jul 21, 2008
is that when he tries to delete some files that he previously stored in the C:"Account Name",he gets a message saying that the file is unavailable in the specified location.However,that is not my main problem now,because when I was trying to help fix this problem I typed "msconfig" into the RUN box to get the startup utility box and I unchecked some of the background programs to prevent them from loading automatically when the system starts,in order to speed up the system;but when I restarted the system I can see the first screen, which is by the manufacturer of the labtop;then when vista starts loading, the screen becomes black and don't display anything,although I am sure that Vista is loading successfully but I cannot see it on the screen.
I am assuming that one of the programs that I have unchecked is responsible for displaying. I have tried to do a repair installation by using a bootable Vista DVD but I couldn't because I cannot see anything on the screen.I tried logging in on safe mode but that did not work either. How can I undo the changes that I have made to startup utility.
View 5 Replies
View Related
Jun 12, 2010
I have two users set-up, user K (with Administrator rights I believe and a password) and user N. If I login as user K, after I enter my password my computer will run for a bit (I can see/hear it logging in) but after a few minutes the screen goes black except for my white cursor and nothing else happens. If I then hit ctrl-alt-del I can see the Task Manager and switch users to user N which will start up normally and give me access to my desktop.
View 4 Replies
View Related
Aug 8, 2009
My vista 32 stopped booting up. So I got the recovery disks out and started to do a recovery. First it asked if I wanted to back up, so I did. then it would not do the recovery. So I started it again. It did the backup and the recovery worked great the next time through. Now I want to get some the of the stuff back that I backed up.
View 4 Replies
View Related
Jun 27, 2009
I have tried installing many different games on my pc, which are quite new and have been released in the last few years. The installation goes fine, and everything is great. When it comes to launching the game, well, i double click the file to run the game, and i get a black screen. Nothing happens afterwards. It just stays black. 'Ctrl + Alt + Delete' does not work, and neither does 'Alt + Tab', or any other keyboard shortcuts. This results in me having to hold in the power button and turn my pc off like that.
Any idea's on what could be wrong? It is extremely frustrating, due to the fact that i've tried running about 3 - 5 games on my computer, and neither of them work, without a black screen coming up after trying to launch any of them. I've tried numerous things like 'Running as Administrator' and changing compatibillity modes and so on and so forth, but none of that works.
View 9 Replies
View Related
Apr 26, 2008
I was having a weird problem with my screen going black at random after installing any version of Vista, and kept having to force a restart because there was no way to get the screen to come back on. I searched all the forums and it seemed to be very common, but as with most of the forums everyone was argueing about how to fix the problem instead of helping the people with the problem. So I'm posting this one in the hope that it may just help one or two people with the same problem.
My remedy was simply to update the BIOS to the latest version P32 I think from the XFX website, and the problem was no more, I also updated the High def audio driver from the same site, now my machine has been running flawlessly for three days now.
View 3 Replies
View Related
Jan 18, 2010
I was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies
View Related
Jun 18, 2008
I have Vista Ulimate 64-bit and everytime that I reboot I get a black screen before the Microsoft Windows scrolling bar.
This is the sequence.
- I reboot.
- I get my bios information screen.
- I get the white, blinking line in the upper left corner of the screen.
- Then the screen goes black with no hard drive activity.
I then can perform a Complete PC restore from my second partition on the same SATA Hard Drive and I will then be able to boot into Vista with no problem.....until I reboot, then I get the Black screen again. It is a vicious cycle.
I have tried to remove video cards (2 x 8800 GTS), memory (4 GB), sound cards (X-Fi Music), load the default bios settings....nothing works. Only a Complete PC Restore cures it, but only until I need to reboot the PC.
View 9 Replies
View Related
