Blue Screen: Booting On Safe Mode/ Last Good Configuration Both Didn't Work
Feb 1, 2010
I am trying to fix a laptop.. it is getting blue screen.. things i did
1. Replace ram
2. Tried booting on safe mode/ last good configuration both didn't work
When I put a windows cd for repair (windows XP Home) and boot from cd.. its goes on the window where I need to select 1.c:windows but when i select that.. it goes on blue screen again.. I removed the hard disk.. connect it externally and ran a chkdsk /r and chkdsk /f then put it back to the laptop still didnt work..
View 9 Replies
ADVERTISEMENT
Apr 8, 2009
I've got this major bluescreen issue. Two days ago, I just restarted my pc for no particular reason, and when it was about to start it gives me this bluescreen. It starts up, I get the loading bar, but then bluescreen. I tried to chose any of the safe modes, but none of them work, just gives me the bluescreen again. To sum all this, I can?t start my computer due to a bluescreen issue, not even with safemodes. It gives me alot of text, but the screen dissappears after a few seconds so I can?t even read two lines. I'm running a HP Pavilion m8055.sc with Windows Vista Home Premium 32bit
View 9 Replies
View Related
Aug 30, 2009
my sony laptop ( vgn-fz70b ) shutdown with no reason, all of a sudden when i try to restart i saw a blue screen of death and afterwards it shutdown and restart again.i try to press f8 to open in safe mode and to check what is the problem but unfortunately i cant access to safemode.i try to reinstall again the os but when i am in the part that choosing the drive i didnt see any drive. and < click load driver to provide a mass storage driver for installation >.i stop downloading cause i cant see any harddisk on their.and i check bios setup..
boot priority order:
1:usb optical drive (*)
2:internal optical drive
3:floppy disk drive(*)
4:usb flash (*)
5:usb hard disk drive (*)
6:internal hard disk drive
7:network
there is no change values for all of these which supposed to be is to set them who is 1st,2nd,3rd. *-means this drive is available when external device boot is enable.
View 6 Replies
View Related
Nov 3, 2009
I have a dell laptop with Vista factory installed. The other day is stopped booting and it can not repair itself. I am attempting to get into safe mode to check a few things out. However pressing or holding F8 while rebooting does not work for me. I have tried about 50 times. If I can not get windows to load are there any other ways through the command prompt or something to get windows to load in safe mode?
View 6 Replies
View Related
May 4, 2008
I had tried to see if I could use one monitor for 2 computers and now I'm unable to get back to the way it was. In display settings they showed screen 1 and 2. I had asked to few screen 2 and that did it. There are no icons, nothing. Just background. No start either. I am however able to right click and get to the control panel, but some places will not respond like the one I need to get to. (Display settings) Safe mode won't even work. Can't even get to the registry.
View 4 Replies
View Related
Apr 19, 2009
I tried to install WINDOWS 7 THEME ( I know big mistake ) after changing these two files wscui.cpl wscntfy.dll in C:/ windows system32 I did change these to .old just incase there was a problem but they aint there now. So I have no controll pannel, and system restore isn't there either, I have tried in SAFE MODE aswell but this didn't work.
View 2 Replies
View Related
Dec 8, 2009
I have a file on my desktop called gv.com.gamesforwindows_640x360.mov. It was a video about gaming. It's 45.5 MB and I can't get it to delete. Right-clicking it and doing Properties doesn't open the Properties window. If I move it to the recycle bin (with the keyboard delete button or the mouse, or Shift and Delete) the "Calculation time remaining" delete dialogue comes up and the progress bar keeps on flashing, but it never deletes the file. The file does not seem to be in use by any programs. Renaming the file or its extension doesn't help. If I try to add the file to Kaspersky Anti-Virus' quarantine, even Kaspersky freezes in a not-responding state. Opening the file crashes the player. Using many force-deletion programs doesn't work either. I have even opened the file with Notepad and deleted the gibberish-text and tried to save it but that crashes Notepad! Safe Mode also doesn't work. Is there any other way to delete this file without attaching the drive to another computer and trying to delete it from there? If I boot with the Vista DVD and enter command prompt through it's Repair centre, what do I enter to delete it from there?
View 5 Replies
View Related
Nov 24, 2009
Normal & 'Safe mode' won't work for me, 'Repair...' either, so before I restore, I'd like to backup via C:/. Commands such as 'copy' & 'xcopy' copy files & folders to another location. I have an 8GB SD, but I don't know what drive is the reader. I've tried to access Vista by typing 'Windows' @ the C:/, but this messags returns: 'WINDOWS' is not recognized as an internal or external command' Windows is listed @ the 'Dir' command! What are the advantages of the C:/ anyway? Is C:/ the same as DOS?
View 5 Replies
View Related
Mar 26, 2008
I just built a new machine. It is identical to a co-workers machine that has zero issues with the OS. I get "Windows Failed to Start." Doesn't work in safe mode, either. Repair doesn't work. Here's the log that it spits out:
Problem Event Name: StartupRepairV2
Problem Signature 01: External Media
Problem Signature 02: 6.0.6000.16386.6.0.6000.16386
Problem Signature 03: 0
Problem Signature 04: 65537
Problem Signature 05: Unknown
Problem Signature 06: FailureDuringSetup.....
View 4 Replies
View Related
Dec 29, 2009
one day my pc was doing a disk check after after the booting screen, then I suddenly stupidity press the restart button it boot then after the vista loading bar, it came with this of blue screen, A problem has been detected and windows has been shut down to prevent damage to you computer. A process or thread crucial to system operation has unexpectedly exited or been terminated. If this is the first time........If problem continues, disable.........Technical information:*** STOP: 0x000000F4 (0x00000003,0x860FD020,0x860FD16C,0x8268A430)
I tried restart several times but no work,i tap F8 and tried all 3 safe modes option, but it freeze or come out this similar bsod above, i tried last known good configuration (AVCND) and Directory services restore mode but same bsod or black screen freeze. Same as the debugging mode.My pc does not have a start up repair so i use my Toshiba laptop recovery disk, so here it goes, After boot screen, then Windows is loading files bar probably the disc then after the loading bar, I go to system recovery options, then it automatically searching for problems in startup rep Then a pop up that it says Start up repair cannot repair this computer automatically, in the problem details show up this,
Problem signature:
Problem Event Name: StartupRepairV2
Problem Signature 01: ExternalMedia
Problem Signature 02: 6.0.6001.18000.6.0.6001.18000
Problem Signature 03: 6
Problem Signature 04: 851981......
after the pop up, it tells me I had device attached recently, but there is no mic, speaker, usb thingys and network plug out before that!! Only mouse, keyboard, cd dvd drive, screen and remember this problem was when disck check cancel, see first paragraph of this post.
View 4 Replies
View Related
Aug 12, 2009
System would only boot up in safe mode, now there is a "unmountable boot volume" 0x000000ED. I just want the pictures off that drive. how should I get them if the operating system doesn't work? Can i plug the SATA drive into my Vista machine?
View 5 Replies
View Related
Jun 21, 2008
I have done a clean install of Vista Ultimate (64), and since then, everytime I start my computer, it fails to boot correctly. It passes the BIOS page, starts the animated bar at the bottom of the page, and a few seconds later, the screen goes blank, and my VDU gives the messgae, "NO SIGNAL" After about a minute, the system reboots to the BIOS page again and continues up to the animated screen, and stops again. After it self boots for a second time, I get the SAFE MODE option screen. If I leave it on START WINDOWS NORMALLY, and leave it to complete the 30s count down, It boots again, and then completes the boot into Vista. If at the count down screen, I press enter, it goes into a boot loop that doesn't stop until I press the reset button on my box.? I have done a re-install twice and problem continues.
View 8 Replies
View Related
Aug 24, 2008
I've been getting some troubles with my Vista computer booting up. Whenever I restart it (or even turn it off and then back on without leaving it for a long while), it will crash during the loading screen, and then restart, and then crash, creating an endless loop unless I boot up in Safe Mode. Once I'm up in Safe Mode, and go to restart, there are no troubles at all, and I can use the computer normally. So, for the time being, I must for boot up in Safe Mode and then restart in normal mode. Occasionally, I get a blue screen before the boot up fails and the computer shuts down, only to restart and continue the endless cycle. When I do get to the desktop (using the Safe Mode trick I mentioned earlier), I may get an error message, containing this info:.....
View 9 Replies
View Related
Mar 20, 2009
Recently after being infected with a virus the laptop goes to a black screen after the vista loading bar. In safe mode it freezes when loading crcdisk.sys System restore was disabled, so I couldn't do that. Startup repair didn't work. If this works I'm gonna post as much
Partial Bootlog:Code:
--------------------
Did not load driver AFD.SYS
Did not load driver AFD.SYS
Loaded driver SystemRootsystem32DRIVERSUSBSTOR.SYS
Did not load driver AFD.SYS
Did not load driver AFD.SYS.....
View 4 Replies
View Related
Nov 29, 2009
My friend at work forgot his password and cannot log onto his computer. He is running Windows vista home premium on a Compaq laptop. We tried to go into the safe mode but the only screen we get is his password sign on screen. Even during boot we pressed f8 key but the password screen came up. He is hoping someone has an idea or answer so he can avoid taking it into get looked at and paying money.
View 9 Replies
View Related
Oct 12, 2009
Using my ISP (Roadrunner Carolinas) speed test site; I get around 200 to 400 kbps download speeds using IE in normal mode. If I boot to Safe Mode, I get around 3500 to 4500 kbps, which is what it should be (this is what I used to get in normal mode before I re-installed Vista). Running the same speed test with Firefox, I get around 1500 to 2000 kbps in normal mode, but if I try to download a file it ransfers at only the 200 to 400 kbsp rate (if I'm lucky). Here's more detail about the system and what I've done so far:
Installed all updates including SP2.
Using Windows Firewall, no anti-virus.
Updated network drivers directly from NVidia (Chipset is nForce750i)
Updated graphics card drivers directly from NVidia
Disabled all LAN protocols except for Client for Microsoft Networks and IPv4
Connected via ethernet cable directly to cable modem, no router.
I've deliberately refrained from loading anything but the basics until I can get this sorted out..........
View 7 Replies
View Related
Jun 5, 2009
i have both Vista and XP in my system with Vista in C drive and XP in D drive..i want to work in full screen mode of XP.. but in vista i cant do it...So each time i have to reboot my sytem and get into XP to do so..so if i can load already installed XP on my vista, it would be helpful...can anyone help me out..remember that i have installed XP and Vista already and i am not using any Virtual PC kind.
View 6 Replies
View Related
Jul 15, 2009
I have been playing around with my Vista for some days now. I patched my registry to account for custom visual styles and all. The computer responded fine to all these changes until today. I installed Desktop Maestro 3.0.0.830 which according to the internet is a decent registry cleaner and works with vista sp2.
What I learnt from the net is that desktop maestro will clean registry and will quicken my startup. So i ran it, and it came up with 937 problems in my registry. So the next thing i did was "Repair". and it did just that. But since then my computer hasn't been starting up at all. Before the login screen comes, i get a blue screen, which remains for too short a time for me to read, and reboots.
Turned the computer on in Safe Mode, which worked perfectly. Ran desktop maestro again, and restored the computer to a previous state. This didn't work. it kept saying C: has some errors please check. But the disk check doesnt work.......
View 9 Replies
View Related
Oct 8, 2009
after 4 or 5 hour my laptop stop working and any key or mouse doesnt work ,then a blue window that consist error message exhibit.
View 5 Replies
View Related
Jul 1, 2008
I have been wracking my brain for weeks now, trying to play C&C First Decade with Red Alert 2 Yuri's Revenge over the LAN, it will only run on IPX networking which I could setup with 2x XP machines, I have Vista Ultimate on my PC, and XP on another, I found some drivers for IPX to work on Vista, didn't work ... So I loaded Hamachi which had built-in IPX support. Now when I open RA2, it no longer says IPX unavailable, it shows 00 00 00...
So it can see my Hamachi adapter with IPX support, great! The other XP machine has Hamachi installed, and they are both VPN'd (Connected) on the same Hamachi Network. They don't see each other... The XP machine shows a few IPX networks, I have tried switching to them all, even put the Hamachi adapter and the LAN adapter to the top of the preferred networks list. This was sort-of a breeze with both XP, but with Vista it's looking to be a bit tricky. I have no firewalls running on either machine and I am pretty cluey when it comes to networking (TCP/IP that is).
View 9 Replies
View Related
Jun 30, 2008
Business with SP1
Sony laptop, fast core2duo, 4GB
Defender+Avast!
Working beautifully for many months, and then a few
weeks ago this began happening:
Perhaps 2-3 times a week, and with no consistency of circumstances, a blue screen will appear. It might happen while working or when returning from hibernate. There's a countdown as memory is stored, and then a freeze. The only way to recover is to do a hard OFF (5 seconds on the power switch) and restart. When it first happened, I had not installed or changed anything, so I was comfortable doing a restore. It happened again.
It's confusing because the stated cause is inconsistent. I've checked to ensure that all drivers are updated and nothing that's contraVistarian is installed. What analytical steps can I undertake to discover what's causing this, and then to help me make the necessary changes?
View 9 Replies
View Related
Mar 23, 2008
I've tried and tried, please I hope you can help me. I have a Toshiba A215-4817 laptop with Vista Home Premium 32bit. My troubles began when my cd/dvd was not operating properly. Toshiba support said my operating system was corrupt. I didn't believe that just because the cd/dvd wasn't working properly that the os is corrupt, maybe they were right.
I have extremely important info on my hd as I do taxes for a living.
In an effort to trouble shoot the cd/dvd I booted into safe mode. No-one tole me that the administrator account is disabled by default! So now I can't get out of safe mode. I have access to only my limited user account and uac is enabled. System restore doesn't change boot options.
I can't edit registry = access denied, cmd.exe when trying to activate administrator account = system error 5.
View 9 Replies
View Related
May 12, 2009
i'm on windows vista and i can't get out of safe mode does anyone know how to x
View 9 Replies
View Related
Jun 26, 2008
My son kept shutting the laptop w/o powering down and now it starts in safe mode. The first time I rebooted and this solved the problem but now that won't work. I can't get it to go back to normal. This has happened in the past but I can't remember what I did to fix it.
View 9 Replies
View Related
Mar 23, 2008
I had an issue with one of my games and it directed me to go into safe mode to uninstall it. Now that it's uninstalled, I can't get out of safe mode. I've been through this forum in and out. I've done nearly all the things that it has stated that come close to my issue. I'm still in here. I've been in and out for 3 hours now. I've gone through the msconfig, and told it to restart in normal mode, I'm still in safe mode. I've used the F8 button while starting it, and told it to go to safe mode, I'm still here. I've even checked to see if it was the resolution, I've set it to my default settings of 1280x720, and restart it, it's still in safe mode. I've done EVERYTHING that I can think of.
View 6 Replies
View Related
Apr 24, 2008
I press f5 or is it f8. but either way I get to the Safe Mood Selection screen and no matter what option I select, Safe Mode or Safe Mode with Prompts, of Safe Mood with Network support, it doesn't matter it boots normal to my user sign in screen and then it freezes.. no mouse or keyboard functions... If I run the recovery disk and tool options then mouse and keyboard work but I still cannot boot up in safe mode nor can I boot up normal.. I just need to get into safe mode and then I believe I can resolve this but since I can't get into safe mode I don't know what else to do?
View 9 Replies
View Related
Nov 14, 2009
I had trend doing a new scan a more complete one while it was doing it i went in i could stop it hit cancel stop safe box and computer wouldreturn to normal I thought that was 6 hourds ago well after i deletedtrend it still in a safe mode.
View 9 Replies
View Related
Nov 14, 2009
I can say is I changed trend to do a real good cleaning of all of folders etc. When I got the safe mode I found trend was doinmg a scan so I stopped it and then it said close and stop safe mode which I did. I also deleted trend to. I m really bad I dont know what I did. I use that I had brain surgery and I m just dah sometimes.
View 5 Replies
View Related
Mar 23, 2008
I have a new motherboard (abit nh-m2sv), X2 +3800 processor, 2 gig pc4200 memory ATI graphics, DVD RW, Maxtor SATA drive, all are suppose to be Vista ready, but vista either won't install, or installs with BSOD's then will only run in Safe Mode.
I have tried Home Basic and premium, the same issue, I install my old faitful XP and it goes straight in. I have run memtest, all fine, I have removed the gfx card, no change, I have tried an IDE hdd rather than a SATA no change.
View 6 Replies
View Related
Jan 19, 2010
Vista will not boot into Safe mode or Normally. The mouse pointer sits on the screen and can be moved but the logon screen does not appear. When I go into startup repair it says it "Could not detect a problem". I have run a chkdsk /f which ran clean. What else can I try to make the logon screen appear?
View 5 Replies
View Related
Sep 8, 2009
I?m have a troubling issue with my computer as it is stuck on a cycle boot when it passes the windows loading screen and then it simply restarts and does a POST test again. I tried pushing F8 key and selecting all the options
safe mode
safe mode with command prompt
safe mode with networking
Go to last working configuration (advanced)
Start Windows Normally ect....
but as I selected safe mode all the windows emergency drivers are loading then the screen go black and repeats the same problem above. I don?t have a cdrom neither an fdd only a usb flash drive.
View 8 Replies
View Related
