Drivers For IPX To Work On Vista, Didn't Work
Jul 1, 2008
I have been wracking my brain for weeks now, trying to play C&C First Decade with Red Alert 2 Yuri's Revenge over the LAN, it will only run on IPX networking which I could setup with 2x XP machines, I have Vista Ultimate on my PC, and XP on another, I found some drivers for IPX to work on Vista, didn't work ... So I loaded Hamachi which had built-in IPX support. Now when I open RA2, it no longer says IPX unavailable, it shows 00 00 00...
So it can see my Hamachi adapter with IPX support, great! The other XP machine has Hamachi installed, and they are both VPN'd (Connected) on the same Hamachi Network. They don't see each other... The XP machine shows a few IPX networks, I have tried switching to them all, even put the Hamachi adapter and the LAN adapter to the top of the preferred networks list. This was sort-of a breeze with both XP, but with Vista it's looking to be a bit tricky. I have no firewalls running on either machine and I am pretty cluey when it comes to networking (TCP/IP that is).
View 9 Replies
ADVERTISEMENT
May 24, 2008
I attempted to install Vista Ultimate 64 (w/SP1) with 4GB. Didn't work - BSOD. I took 1 stick out so now I had 2GB. After about 5 reboots, I finally got Vista to install. However, as soon as I'd install the latest gfx driver (175.16-Vista64) it would crash. I spent hours on the phone with Microsoft - they couldn't solve it. Called EVGA, they said they hadn't heard of any problems with the latest driver. I installed an older driver (169.25) and got it work. I never got the system stable, and I don't think it's the gfx card.
I tried installing Gears of War, which seemed to install just fine, however, if I started to do something else (I tried this twice) it would give me a BSOD. Then, I tried installing it and nothing else. It crashed on it's own giving me a BSOD. Another time I was just looking around the features in Control Panel and it crashed. Bottom line - it was never very stable.
I decided to format my drive and start fresh. This time, I could get the Vista disc to load and install, but it would crash at various places during install (sometimes after "Installing Features," but most of the time just before it would finish - so about 30-45 minutes into the installation). The errors I have received are the following (but not limited to, ):........
View 9 Replies
View Related
Mar 26, 2008
I recently tried to upgrade from Vista Basic to Vista Premium but the activation key didn't work. So I recovered Vista Basic from the windows.old file but there is still a corrupt version of Vista Premium on my hard disk. how to remove it?
View 9 Replies
View Related
May 20, 2007
I had a problem with my Vista so i had to reinstall it. After i reinstalled it I had to enter my activation code. I did that (i think). I tried the voice automated system and it didn't work. This is what i entered.
View 5 Replies
View Related
Mar 23, 2008
I just upgraded my system's motherboard, chip, and ram and ran into a big problem. When I booted up for the first time, Vista started to boot up then reset. When I ran recovery, it told me some drivers were corrupted (probably the old hardware) . I ran the motherboard disk and installed the new drivers and to make a long story short, it didn't work. Add that to the fact that I can't find my serial number sticker and I'm screwed. Is there a way to find my serial using the Dos prompt or can windows pull my serial off my hard drive if I reinstall? Please help, the copy of Vista is only 4 months old and I was waiting to put the sticker on when I got the new case + Motherboard setup
View 4 Replies
View Related
Oct 4, 2008
I have a Dell Inspirion E1505. 1.73ghz core duo, 2 gb Ram, 80gb hdd. I had been running Linux on my laptop. It ran fine. I decided to sell the laptop and realized I'd have to re-install the Vista OS that came with the computer. After a successful install and the downloading of all updates, including SP1, I noticed a problem when I attempted to change my power options. When I clicked on the drop down menu, it showed me all the options, I chose what I wanted and when it retracted, it went through every option and then settled on the one at the top of the list. It did this numerous times. I then clicked on set to default and that worked. I had downloaded spybot search and destroy and attempted to install it. When it came to the select language portion, it was on Afrikaans (top of the list), I attempted to change it to english and it would quickly rotate through all the languages and stop on Afrikaans, again, numerous times. I googled the problem to no avail. I then figured that one of the updates had a corrupted file or something and restored the syatem to the very first point, again to no avail. I then decided to do a repair install, that didn't work. I then decided to do a complete re-install, when I get to the set the time and date,I choose Eastern Standard Time and it then rotates through all the choices in seconds and stops at the very top one. I am Lost and could sure
View 4 Replies
View Related
May 12, 2008
I decided to make the most of my MSDN subscription and give Vista a go, since my XP installation was very slow. I wiped the drive clean and installed Vista Ultimate SP1 - with an open mind and high hopes.
It took a while to install, but time aside it was rather painless. However, my experience started to go downhill quickly. As a first step, I opened up IE and went straight to AVG's website to get some Antivirus protection. IE crashed. Ok, so I tried a few other websites. IE crashed rather often, in fact it's not random it'll crash on the same websites every time. So I managed to get Firefox installed without having IE crash - and tried to do all my updating through Firefox (not much choice).
My second bad experience was when I tried to install MSN Messanger. First off, the online downloader/installer didn't work. Says it couldn't install and to try again later. So I opted for the standalone installer (took a while to find) and tried it. It installed, but unfortunately it constantly crashes with various exceptions, seems to be related to the rotating ads but can't be sure. I have even tried to install Flash & Java and still no luck with the wierd exceptions. I also made sure I updated my video drivers to the latest ATI drivers available.........
View 8 Replies
View Related
Apr 10, 2008
Mail Notifier that works i tried the Yahoo widget didn't work and a couple from the Sidebar widget list none worked, I use Yahoo for my emails
View 4 Replies
View Related
Jul 29, 2009
1. On my old laptop (Windows XP) I first used MS Office 2003, I then installed MS Office 2007 Student and Home. Before uninstalling Office 2003 I stored some Outlook pst-files (e-mail, contacts and archive files). How can I import these files into Windows Mail/Contacts on my new laptop (Windows Vista/MS Office 2007 H&S). I tried Windows Easy Transfer, but it didn't work.
2. How can I import Mozilla Thunderbird files (e-mail, contacts) from the old laptop into Windows Mail/Contacts on the new one? The wizzard does not give the opportunity to select Thunderbird files.
View 4 Replies
View Related
Mar 21, 2009
I have a dell xps M1530. After fiddling with a bunch of settings to get protools 7.3 (an XP program) to work in compatability mode, it wouldnt work after installing and uninstalling it a few times so i bought the new vista compatible version but when i went to uninstall it it wouldnt let me. I then turned off DEP with setup>performance>dep but it didnt work so i disabled it in command prompt but it still wouldnt let me uninstall it. Then after i turned it off the next time i turned it on it wouldnt start. Every time i try to start it it loads up to the start of the windows load screen where the green bars usually go across the box, but after loading the box and the windows logo it blue screens and goes back to the initial loading screen. Every time i run startup repair it says there is no problem, then restarts and does it all again. Every time i run system restore i run it back before i tried installing protools at all, and it says its successful but then the same blue screen happens at the same time. When i run system restore it only lets me run it on the OS: (system) drive and the other drives are able to be highlighted but i cant tick the boxes.
View 4 Replies
View Related
Feb 14, 2010
I have an Acer Aspire laptop which the user password was changed and forgotten, also all other accounts were deleted. I am unable to do ANYTHING with this computer now. We bought a new laptop, but want to get the pics and music of the HD. Any ideas on how to get those files, or how to get passed the password? I've tried the password reset disc downloaded online, but didn't work.
View 4 Replies
View Related
Apr 15, 2009
here’s one for the books!!! Shawn, I hope you’re there, I downloaded a GAOTD icon program called Desktop Icon Toy, but it didn’t work well for me, so I uninstalled it (using Programs + Features). Afterward, I did a search to see if there were any additional files left over, and there was one, (the system tray icon) which I also deleted. The icons on my Desktop reverted back to the way I originally had them, and I thought all was fine, until. . . later this evening I turned my laptop off and rebooted. Everything seemed fine except for the Desktop icons. This was something I’ve never seen before – each of the original icons had a generic icon laid over the top of it – like two layers of icons, and you could see the original icon a little bit around the edges of the generic one.
I tried right-clicking on Properties to change the icons back to what they were, but no dice. Couldn’t change them at all. Then I went to your Tutorial on deleting the icon cache, but it didn’t work. In fact, I did it twice and each time, the icon cache got larger! ( It went from 3,648kb, to 4,043kb, to 4,046kb.) I rebooted after each attempt and deleted the icon cache.db file from the Recycle Bin after each reboot. The last thing I tried was changing the Display color setting from 32 to 16 and back again. I saw the icons move slightly as the changes were occurring, but the problem didn’t get fixed. Now I’m really concerned. Have you ever heard of this happening Shawn? I have Vista 64 bit on an HP Pavillion dv5t.
View 6 Replies
View Related
Mar 20, 2009
Recently after being infected with a virus the laptop goes to a black screen after the vista loading bar. In safe mode it freezes when loading crcdisk.sys System restore was disabled, so I couldn't do that. Startup repair didn't work. If this works I'm gonna post as much
Partial Bootlog:Code:
--------------------
Did not load driver AFD.SYS
Did not load driver AFD.SYS
Loaded driver SystemRootsystem32DRIVERSUSBSTOR.SYS
Did not load driver AFD.SYS
Did not load driver AFD.SYS.....
View 4 Replies
View Related
Sep 8, 2008
I already know how to go from vista to xp, but what I'm wondering is if anyone has done this and how hard is it to find drivers that will work on xp?
View 4 Replies
View Related
Sep 7, 2009
Will most/all 32Bit software run on Vista 64Bit machine, and how about drivers, do you need 64Bit drivers or will 32Bit drivers work? My daughter just got a new Dell 64Bit machine.
View 6 Replies
View Related
Nov 9, 2009
Seen in the capture below, the video card is showing as a 1.0, while I expected at least 5.0...the only place this shows to be a problem is while playing halo 2, the game plays choppy to the point where it is almost unplayable. This is odd however, because it seems to do fine in Dawn of war, DDO, and tribes vengeance. I ran a benching program and the card did fine, fps of 280 something, but vista can't seem to sort itself. We are about to get borderlands for this pc, so we wanted to get this problem fixed first. So far I have installed and reinstalled the newest nvidia graphics drivers, mobo bios, and chipset drivers, and this has me just about stumped. the computer to recognize and use the graphics card? Windows was able to successfully install device driver software, but the driver software encountered a problem when it tried to run. The problem code is 43.
Problem signature
Problem Event Name: PnPDeviceProblemCode
Architecture: x64
Hardware Id: PCIVEN_10DE&DEV_084D&SUBSYS_82E81043&REV_A2
Setup class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
PnP problem code: 0000002B
Driver name: nvlddmkm.sys.....
View 4 Replies
View Related
Jan 18, 2008
Some program has started to use a lot of CPU cycles during idle. I have a q6600 processor. My logitech g15 keyboard LCD display is showing core 2 (0,1,2,3) to be running constantly at 20-40%. This is unusual. There is very little hard-drive use occurring. I've been running Vista Ultimate x64 since October. This is new behavior. I tried using task manager to find the culprit. That didn't work. This process seems to be preventing the computer from entering sleep mode. How do I find out what's running up my cpu usage? (If I can find it, I assume I can shut it down!)
View 9 Replies
View Related
Feb 1, 2010
I am trying to fix a laptop.. it is getting blue screen.. things i did
1. Replace ram
2. Tried booting on safe mode/ last good configuration both didn't work
When I put a windows cd for repair (windows XP Home) and boot from cd.. its goes on the window where I need to select 1.c:windows but when i select that.. it goes on blue screen again.. I removed the hard disk.. connect it externally and ran a chkdsk /r and chkdsk /f then put it back to the laptop still didnt work..
View 9 Replies
View Related
Jul 2, 2009
I have been playing COD 4 and have been noticing that the graphics will 'invert' sometimes, at first i thought this was because of the installation disc as it was VERY, VERY scratched. But I got a new one and installed it again, then I thought it was the graphics card and was replacing it anyway so I chucked it. Then I thought it was the monitor as Vista x64 didn't have drivers for it. So I got a new monitor, reformatted recently, all drivers are installed and I still have the problem.
I went into my ATI Catalyst Control Center and put fan speed to 100% incase the gfx card was over heating... still nothing. This is what it looks like, as soon as I alt tab it fixes the problem but it is very annoying.
View 6 Replies
View Related
Feb 15, 2008
ever since planning on a new pc build i knew at some point that id want to install vista on it. Ive planned to get vista 64 seeing as i have a machine capable of running a 64 bit o/s with ease (when i buy my extra 2gb of ram along with my copy of vista) I have been doing my research on which of my games ill still be able to play & tbh the only ones that im remotely worried about are older than red orchestra so no problems there.
My only real concern is the drivers for my belkin wireless card (f5d7001uk) which doesnt have any vista 32 drivers! But ive heard a rumour that vista automatically installs the drivers itself?? Im also worried that some of the useful little apps i have installed wont install such as winrar, wavepad, deepburner pro 1.8 & punkbuster
View 9 Replies
View Related
Oct 4, 2005
While being satisfied by the cool effects and new interface of Windows Vista Codename Longhorn, many of us testers are what you would call "gamers." The lot of us would like to know if gaming on the default Vista Supplemental drivers would mean loss of graphics quality compared to using up to date drivers on a XP OS. For example, I installed Vista and then installed my trusty game, Battlefield 2. I tried using the new nvidia Vista drivers but the game kept crashing when I start it up. So I reinstalled the Vista Supplemental drivers and it happened to work. Quite interesting. I am able to run the game on default vista drivers and not the nvidia vista drivers. Coming to conclusion, would using the vista drivers result in loss of quality and graphics compared to using up to date drivers on a XP system? Or you can also rephrase it; Would gaming be better on the Vista Beta or XP? Does anyone know if SLI works on Vista?
View 9 Replies
View Related
Mar 23, 2008
Ive just bought some new headphones yet when i plug them in the sound still comes out of the speakers. I know the headphones do work because i use them with my mp3 player
View 5 Replies
View Related
May 11, 2008
My eight year old Dell finally bit the dust and bought a new Gateway preloaded with Norton AV. I have a paid subscription through 01/09 with Windows One Care that I have used for three years with my Dell and never had problems with it. I have always disliked the hoggy Norton and McAfee AV's and will uninstall Norton on the new pc using the uninstall download from Symantec and probably some manual removal as well.
My question is : will WOC work with Vista?? Or should I use some of the free AV's ie Avast, AVG free, etc etc. My pc is only two days old and I don't want to spend days attempting to download new programs and fight with firewalls and potentially messing up new pc.
View 5 Replies
View Related
Mar 23, 2008
I have tried everything possible to get my HP PSC 500 to work with Vista, I had no problems with XP. The driver is there, but it presents an error when I go to print. I have contacted HP and they tell me because my machine, which is in perfect working condition, is 5 yrs old it will not work with Vista. I find this totally unacceptable and would like to find a solution to this other than spending more money unneccessarily to get a 2nd printer that I don't want
View 6 Replies
View Related
May 14, 2008
I've been dealing with this horrendous excuse for an email program for about 2 months now (thus my display name. my new computer came with Home Premium VISTA. I'm seriously thinking of getting my old original copy of XP installed back in my computer at some point. I'd do it myself, but I want to make sure I don't lose anything in the process. I've lost enough because of this fiasco already.
1) I can no longer use a rather expensive program that I bought to build web sites for small businesses (so therefore this also had a direct impact on my income as well as my frustration level). It won't work with Windows VISTA (because it's not a Microsoft product, of course).
2) I receive most email, but I have to check the spam folder constantly -- since I work online from home, and receive a good bit of business email at home that will often contain links, etc., VISTA reads it as "phishing" email and dumps it. And some it seems to dump in there for absolutely no reason at all...........
View 5 Replies
View Related
Mar 23, 2008
Has anybody tried this program with Vista & does it work well? Also, I'm not sure what I should shut down in the back ground. I don't want to mess my computer up.
View 4 Replies
View Related
May 8, 2009
i'd like to put my shadow copies on a different disk. anyone know how? details: event log tells me that shadow copies are having trouble finding space, and getting deleted. my intuition tells me a shadow on its own volume sounds incestuous. better on a different disk. just like pagefile. searching, i found vssadmin add shadowstorage /for=c: /on=t: /maxsize=10g but it doesn't work on vista sp1. what's that about? perhaps it's in the registry somewhere? anyone know...?
View 4 Replies
View Related
Oct 20, 2009
Vista Home Premium 32-bit. I understand my ISP only uses IPv4 - Virgin Media Anyway, name resolution does not work in Vista. I operate a LAN behind a router - GTA GNAT 3.42.This is merely a debian linux router kernel with features like HA (high availability et al). I use a PIII Coppremine, 512MB, CompactFlashCard with linux image, 3Com 10/100 PCI on the public interface, 4 Port SMC 10/100 and 2 Port Intel Pro/100. I have no problems with Win2K and Win XP Pro. I can ping and tracert domain name(s) with no problems (Win2K/WinXP);
Unable to do this in Vista.Disabled Vista Firewall for testing. Disabled (unchecked) IPv6 and discovery components on network connection. Disabled IPv6 in registry with DisableComponents FF patch i.e. HKEY_LOCAL_MACHINESYSTEMCurrentControlSet Services cpip6Parameters Disabled IPHelper service in services. Disabled DNSClient in services (to eliminate cache issues).Tried another NIC in the PC, a 3Com with correct drivers.Still cannot resolve domain names but get IP addr etc. Removed 3Com NIC. Onboard NIC - nVidia - Vista installed nVidia driver at install. As boths NIC fail DNS resolution, assumed not a NIC issue. Network Type - Workgroup (not connected to domain)....
View 4 Replies
View Related
Apr 15, 2008
Does any one know if this new dotNetFx35setup.exe work on vista 64?
View 4 Replies
View Related
Jun 30, 2008
I see that Microsoft is not going to offer XP any longer. Do they have any plans to get Vista to work with Outlook? I have Outlook 2000 and I have to enter the password each and everytime i log on, it is aggrivating. I am looking for another email program that has the tasks, that are as easy to use as Outlooks.
View 6 Replies
View Related
Oct 14, 2009
How do I get COMDLG32.OCX to work in vista?
View 8 Replies
View Related
