I've recently got attacked by some sort of virus malware and my AVG instantly asked me to reboot. After I rebooted and loaded the green loading bar, my entire screen turned black without the windows badge.When I clicked on the restart button, I'm able to get inside safe mode, network and command prompt but not start windows normally.. I've also tried chkdsk command but it showed 0 bad file.
View 4 Replies
A few days ago my display settings would not save and each time I restarted my computer they were different. I thought it would not get any worse however now when i start my computer the screen goes black just after the green loading bar. The computer is still on because it makes hard drive noises and my quickplay buttons are blue but the computer does not respond. It starts in safemode but it won't start normally. I have Vista Home Premium 32 Bit with Service Pack 1. Any help would be greatly appreciated to get rid of this black screen.
View 4 Replies View RelatedLast night my pc was running fine and just before I went for some shut eye put my pc into sleep mode today I woke my pc only for it not to allow me to log on, mouse movement only nothing was clickable so after a short while I decided to reset upon boot I got the green loading bar but then a black screen after about 20 mins I gave up and tried a restore last good config.... Yeah nice one it bsod on me At 55% chkdsk and now I get a windows boot manager error file: ootcd
I tried Bootrec /RebuildBcd but it brings back an error that it can not create the new file as the file already exists. I'm not having much luck with the recovery disk for repair options as it can't seem to find the OS and brings back errors of can not recover everything seems on a go slow and ubuntu can't find my c drive even tried spin right and that can't recover a bad sector I'm at a loss as to what to do befor the fresh install option I'm on my last option to try use a back up store disk
First after doing an ordinary restart, my vista (ultimate) gets stuck for a LONG time at the loading screen and does not move, with the green loading bars. this happens every time i try to restart. i pop in my original vista disk and start the repair process...it says it found something wrong with my startup and it found what was wrong and that it was repaired. after this i get the message NTLDR, which is a whole nother problem. i ran the below to fix the NTLDR...
1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer............
HP Laptop running Ultimate....Everything was fine yesterday - attempted to load a .cue file with MagicISO and computer froze.. no biggie went to restart - got the loading shot (green night rider bar) and then black screen of death. Restart - tried all safe modes but will not pass crcdisk.sys..... Attemoted to start from dvd - finally got that working - Go in to repair mode - it finds Vista on by C: parition - scans for problems but can't fix them.. Try system restore - says there are none - which isn't true...tried the command prompt and did bootrec /fixmbr and /fixboot still no change..... I even attempted to do a clean upgrade over the old one, but of course the upgrade option is grayed out...
View 4 Replies View RelatedOnce vista boots from the cd it goes to a windows is setting up files,then goes to a black screen where there is a lilttle green bar moving. Now right after that it goes to a blueish screen where there is just the mouse cursor on the screen and just stays there? This is on all new hardware. Also this is a sata hard drive,
View 9 Replies View RelatedI was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies View RelatedMy computer is freaking out and i cant figure out why. I try to start it normally and it posts and I see the green loading bar for windows at the bottom of the screen and then the screen goes black. I can load into safemode but that is all. I can not restore sucessfully.
View 9 Replies View RelatedI have a problem with Vista. When I start my computer, it displays a black screen for a couple of minutes before starting to load Vista. I don't really know what to say more, since I'm totally clueless with this one. What I've tried to do, is to update my drivers. I've also updated my BIOS. What should I try next?
View 9 Replies View RelatedRIght now im on the same computer on my BItdefender 2009/Iceweasel.So after i get a black sceen with a cursor that i can move where i want but it just stays like that.I tryed all the safe modes and they dont work at all.Plus i dont have a VistaDVD to make it worse.(My Original OS was Windows Vista Home Premium x32)I really dont know where the command prompt is on iceweasel but i know how to use it in vista.
View 7 Replies View RelatedI reboot the computer, boot from DVD.
I get the screen that says "Windows is loading files", and then I get the screen with the loading bar at the bottom (the one that looks a bit like the standard Windows XP loading bar) and then the screen goes black and nothing happens. I've tried leaving it for a good half hour, still to no avail.
I have a problem currently with Windows Vista Ultimate(Integrale), this occurred last Friday evening. I was finishing off a word document when suddenly all went black. As an end user I assumed this was a system crash and so rebooted my system, then ran registry repair, then checked for viruses etc with Live OneCare, eventually reloaded Vista all to no avail. Each time I rebooted I was greeted by a black screen after logging in.
I called my tech support who could not help but I did manage to gain access to the internet and after a short while found an item entitled Black Screen Death. This reported that all my problems where due to Microsoft thinking I had a non genuine copy of Vista it went on to explain how you could circum-navigate the problem (this I did and even though I have to repeat this process each time I log on I can use Windows normally). I purchased my copy of Vista Ulitimate from a large chain store at the not give away price of over 400 Euros and registered the same online on the day of installation and have been running for sometime with other Microsoft products including Live OneCare. Why then am I suddenly crippled for an entire weekend by Microsoft security and how can I rectify the situation perminently
I have a problem with this graphic card, when I run a game with better graphic details. My computer freeze for 2-5 second, next is black screen for 2seconds(as monitor is shuted down) and next is black screen while i don't stop the game. Next I see this-> I hope that you solve my problem(and see that image) BTW: if this problem was solved on this forum sorry, but on system instantForum i was never been and i don't know how it control. Or if this post is in bad category please send message for me when you move it.
View 9 Replies View RelatedWondering if anyone has a suggestion. When importing a DVR-MS file recorded using Windows Media Center into Windows Movie Maker, in order to convert it to a more compact WMV file, a green screen shows up in the preview pane on the right-hand side. The audio works -- but only green shows.
It's strange because the DVR-MS file plays fine within Windows Media Center.
System is a Dell XPS 410 running an ATI Radeon x1600 pro with the latest Certified driver from Windows Update (8.391.0.0 dated 6/26/2007).
There is a later driver available from ATI, 8.9, but before taking the risk up upgrading the driver, wonder if there's another setting that may be causing the green screen?
my problem being stuck at the blue/green screen while making a new fresh install.) Well I first signed up because I have was having install problems. When it got to the blue/green screen it wouldnt do anything. But what do u know.. right when I was typing this it starts to load and Im now on my way installing windows vista 64 bit! (cause I just recently bought 8gb of memory) Well... I guess I would explain my story since Im a newbie... and something for you guys to read.. Well my computer really needed a new HDD because for some reason my old one would always get curupted after like so many months... about 2-3 months? I was wow **** this. I wasnt sure why it was doing this. But my computer was only on a surge so I think maybe a couple power outages ****ed it up. (I already fixed that problem though, just bought a battery from newegg.com, when I bought more things, like my new hdd, memory, mouse and mouse pad.)
so finally my memory and windows vista x64 bit dvd came into the mail. As soon as I got em... I installed the memory then I wanted to upgrade my version of windows xp 32bit (I must say a really good OS at the moment, till when windows 7 comes out) So I tried just throwing in the cd and found out I couldnt upgrade that way. Because I got an error that said "somethin, cant remember the full message but bascially because I couldnt run 64bit dvd when I have 32bit" so no biggie right? Then I was like ok well I can just install it by booting up. I got passed the part that said "Now loading windows vista files" alright not bad... so far so good. But damn I was wrong when I got to the blue/green background. I noticed the dvd wasn't spinning my computer was just sitting there. It was frozen though since I could still move the mouse. So I was like oh man... cmon vista... Well I waited a little bit not to much though cause I think it should just pop up and start working. It wasnt doing that so I knew something was wrong......
List of Parts:G. Skill 4x2gb DDR2 PC2-8000 ram Intel Quad Core 2.4Ghz cpu Gigabyte GA-X38-DS4 motherboard BFG Tech 8800 GTS (G92) gpu thermaltech toughpower 700w psu Western Digital Caviar WD2500 hd Chi Mei 22" LCD Sound Blaster Audigy SE sound card LiteOn optical drive Problems started today when i tried to turn on my computer, im running Vista Home Premium x64. The loading bar screen would show up and then after that it would go black like usual, but then my monitor would show that there was no input available and the computer would hang in this state forever. Any suggestions? I know a new HD would probably fix it all but im not sure i really want to spend all the money, literally just built this baby 2 weeks ago!
View 7 Replies View Relatedwhere it boots up to the loading screen is fine, slows down and stops, then it will bring me to blue screen and restart to the point where it has black screen telling me boot up was unsuccessful, and i can go into all 3 safe modes or boot normally, have tried all of them and non of them even boot
View 6 Replies View RelatedI am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
It boots on the F2 setup screen does several seconds of the loading bar, then my screen says 'no signal' and it goes back to the F2 setup screen and freezes. Then I have to turn of my computer by holding down the power button and start it again the second time where it boots fine.
View 5 Replies View RelatedFor about 1-2 years my computer ran fine until recently. Now, whenever I start up my computer it boots all the way to the Vista loading screen, seems as if it loads all the way, then shuts down with no warning. This happens at the same point every time. I tried putting in the Vista DVD and starting that up in an attempt to reinstall or repair Vista, but I get the same results on the same loading screen. The computer is custom built by myself.
Specs:
AMD 64 X2 4800+ 2.4GHZ
ECS GeFORCE 6100SM-M mobo
BFG Nvidia 8800 GTX
OCZ PC6400 2GB 800MHZ (Dual Channel)
Maxtor 160GB 7200 RPM HDD
Coolmax 600W CXI-600B PSU
(Everything is using stock settings)
The next time it started, the graphics were all screwed up and when it gets to thebit after the Windows Loading Bar it goes to a Blue Screen of Death. The computer then restarts and the same thing keeps happening. I tried running the computer in Safe Mode but it doesnt work either :/ neither do any of the other Advanced Options.
View 9 Replies View RelatedI have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.
View 7 Replies View RelatedI am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.
View 5 Replies View Relatedi went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.
View 7 Replies View RelatedProblem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).
View 4 Replies View RelatedNew computer. Vista Home Premium. FSX continually stops loading and have to restart the loading process. Six times to get it loaded, but all sytems not functioning. Loaded Accelerator crashed whole system had to do repair of FSX and start over again with continual stoppage. Don't know where to go from here. It worked fine with XP
View 9 Replies View Relatedwindows seems to boot up partially but does not get to the log-on screen and instead goes to a black screen and all you can see is the arrow shaped mouse pointer and thats all. I put the windows cd in to try to repair the installation and booted from that but still the same thing happens
View 6 Replies View RelatedAlrighty I went off to work with my pc turned on a few days ago, I come back and the screen is black and nothing I do is responsive to the screen. I then reboot the Pc it leading to a blue screen. Some times when I reboot it will blue screen some times it will just be a black screen that is un responsive. I have tried f8 options in advance boot optiotns, Ive tried re installing windows- it claiming my disk is full. Ive tried system restore it also says I have a disk failure. It wont let me check errors in the properties options on my hard drive. I have done a virus scan(no virus's) and I have 300gigs left of space.
View 8 Replies View Relatedis that when he tries to delete some files that he previously stored in the C:"Account Name",he gets a message saying that the file is unavailable in the specified location.However,that is not my main problem now,because when I was trying to help fix this problem I typed "msconfig" into the RUN box to get the startup utility box and I unchecked some of the background programs to prevent them from loading automatically when the system starts,in order to speed up the system;but when I restarted the system I can see the first screen, which is by the manufacturer of the labtop;then when vista starts loading, the screen becomes black and don't display anything,although I am sure that Vista is loading successfully but I cannot see it on the screen.
I am assuming that one of the programs that I have unchecked is responsible for displaying. I have tried to do a repair installation by using a bootable Vista DVD but I couldn't because I cannot see anything on the screen.I tried logging in on safe mode but that did not work either. How can I undo the changes that I have made to startup utility.
I have two users set-up, user K (with Administrator rights I believe and a password) and user N. If I login as user K, after I enter my password my computer will run for a bit (I can see/hear it logging in) but after a few minutes the screen goes black except for my white cursor and nothing else happens. If I then hit ctrl-alt-del I can see the Task Manager and switch users to user N which will start up normally and give me access to my desktop.
View 4 Replies View Related
