Windows Is Loading Files Stoped
Mar 19, 2008
I want it to run Windows Vista 32-Bit Edition. I had Linux Ubuntu 6.06 LTS, now I erased the linux partition and format the disk with a utility called Dban. I had to make a bootable CD in order to format it. When the disk was in blank I inserted the Windows Vista DVD and the screen said "Windows is loading files" then the progress bar of Windows Vista appears however it stops. I waited there 1 hour, but nothing happened so i thought it was because I didn't format it to NTFS. Then I used GParted to format it to NTFS. I tried again, however it gave me the same results.
View 5 Replies
ADVERTISEMENT
May 27, 2008
I have been using Windows mail fine for months, but starting yesterday it is not letting any outgoing message go out. I at first thought it was just a Comcast issue, but the other account i have with a totally seperate provider is not sending either. Here are the error messages:
The connection to the server has failed. Subject 'Re: [brentwoodcamera] Warner Park Hike...', Account: 'mail.comast.net', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
The connection to the server has failed. Subject 'Re: Your new mailing address', Account: 'mail.digitalstars.net', Server: 'mail.digitalstars.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 8 Replies
View Related
May 12, 2008
when i r eboot i get a message Host processor for windows services stoped
View 4 Replies
View Related
Apr 26, 2009
When I switch my laptop on, I get the following message: "WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE CAUSE...". I then have the option to launch system repair or start windows normally. Either choice I make has the same consequences...a screen launches saying "loading windows files" Then I am taken to windows loading screen with little green bar. Then the screen goes black. Not off, just black. If I try and do a system recovery, I go through the same steps via f11 but then I get the 'blue screen'. I didn't create the boot disks that one is supposed to do when they get vista.
View 7 Replies
View Related
Jun 27, 2008
Took out 2G ram as suggested - leaving 2G. Get through black screen with white bar "Windows loading files". Then blue screen with white horizontal bar for 35 minutes +/-. Then Install Now dialog box. Enter key code. Checks off "Copying files" Begins the "Expanding files" and goes to 11%.
Next message box: "Window cannot install required files. Make sure all files required for installation are available, and restart the installation. Error Cord: 0x8007045D. (Reviewing this error in the knowledge base does not seem to speak to a new installation.)
I reviewed my MOBO instructions and I quote: "It is important to remember that before installing the driver CD that is shipped in the kit, you need to load you operating system." So what drivers does the Vista software think it needs? I spent more than 3 phone hours with Microsoft help and they had me putting in my Win 98 disc made a royal mess of my situation. I'm back now to the beginning and yet still no installation.
View 6 Replies
View Related
Jun 27, 2008
Iv just bought a new PC, I put the vista CD in the drive and power up the computer. A screen appears saying "windows is loading files" and a bar that slowly fills up.Once the bar is full (suggesting all the files have been loaded), a new bar appears with microsoft corporation written underneath it.From looking at online install guides it appears that there should be a moving green block within this new bar however, it is completely empty and nothing happens. I have tried to install several times and left it for 40 mins or so each time, but i keep getting the same problem - i get to that stage and it seems the install freezes.
View 7 Replies
View Related
Jun 11, 2006
I reboot the computer, boot from DVD.
I get the screen that says "Windows is loading files", and then I get the screen with the loading bar at the bottom (the one that looks a bit like the standard Windows XP loading bar) and then the screen goes black and nothing happens. I've tried leaving it for a good half hour, still to no avail.
View 9 Replies
View Related
Dec 15, 2009
I found an old thread from June 2009 that describes the issue I am having entitled Cut and Paste to Internet causes Error The person states the exact issue (see below) I have now and the only suggestion to this thread did not help me-- the issue is still there "trying to cut text from a MS Works Word Proccessor and paste it to a message board on the internet. When I right click to past, I get a message "Internet Explorer has Stopped Working and Must Restart" at which point my browser shuts and reopens" Does anyone know how to fix this?
View 5 Replies
View Related
Jun 8, 2008
New computer. Vista Home Premium. FSX continually stops loading and have to restart the loading process. Six times to get it loaded, but all sytems not functioning. Loaded Accelerator crashed whole system had to do repair of FSX and start over again with continual stoppage. Don't know where to go from here. It worked fine with XP
View 9 Replies
View Related
Aug 6, 2008
First after doing an ordinary restart, my vista (ultimate) gets stuck for a LONG time at the loading screen and does not move, with the green loading bars. this happens every time i try to restart. i pop in my original vista disk and start the repair process...it says it found something wrong with my startup and it found what was wrong and that it was repaired. after this i get the message NTLDR, which is a whole nother problem. i ran the below to fix the NTLDR...
1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer............
View 6 Replies
View Related
Jan 11, 2010
I have a pc with windows xp media centre edition, running flight simmulator.. I installed the accelerator kit on it.. now its not starting up...getting blue screen saying either "uninstall your antivirus program or driver" I can not load it to safe mode to do that, I have run the repair from the recovery system still no luck.
View 6 Replies
View Related
Oct 5, 2009
I've tried everything to fix my Dell Inspiron 1545 running Windows Vista Home Premium 32bit and I can't seem to work out what to do anymore. My laptop automatically did some updates earlier today and I rebooted as advised, unfortunately it failed to load up at all and I got a screen telling me windows has failed to start. Problem could be due to a recent change of hardware or software. The only recent change being the updates. I've tried to do a system repair, which hasn't worked. All it does is load a blank screen with, eventually a movable mouse cursor, nothing else happens after. I've tried to load from the boot cd also, but I have the same problem.
The white bar loads, message saying windows is loading files then as soon as its passed the blank screen and mouse cursor come up. I can't load anything in safe mode as it just comes up with the windows failed to start message. I'm at a loss, I think. And if I can't reinstall windows then it looks like my laptop is messed up completely. All I haven't tried is perhaps loading safe mode with command prompt and trying to do a system restore, and Repair Install For Vista this, which I'm not quite sure I understand fully. I might have had SP1 installed already. Anyone got anything they can chuck my way to advise me to do? I haven't had the laptop all THAT long.
View 9 Replies
View Related
Aug 10, 2009
When I click on Windows Update, it just hangs with the circle cursor spinning. All that opens up is a white box, and nothing happens. I had no issues running Update 2 days ago. It just started this yesterday out of the blue. IDK if it is related, but I also can't update drivers in Device Mgr. It just keeps searching the web for drivers, and nothing ever happens.
View 5 Replies
View Related
Nov 30, 2008
I have a problem with Vista. When I start my computer, it displays a black screen for a couple of minutes before starting to load Vista. I don't really know what to say more, since I'm totally clueless with this one. What I've tried to do, is to update my drivers. I've also updated my BIOS. What should I try next?
View 9 Replies
View Related
Jun 1, 2010
It's ticked in msconfig - Startup, but never loads Alert each time loaded manually and 'Turned-On' but never loads on reboot
View 7 Replies
View Related
Dec 20, 2007
After powering on the computer, it literally takes 10-15 minutes to start loading windows. Once windows starts loading, everything is fine, and the computer runs beautifully. I'm thinking this has something to do with the bios, but don't know where to start. Once again, the computer stalls before windows even begins to load.
View 7 Replies
View Related
Jan 7, 2010
I haven't been able to start Windows past the green loading bar. The first couple of days when I tried to turn on the computer it would take me to an 'Error Start Up' screen where I would try to restart using safe mode or something.
Now though, it does the blue HP screen, then goes black with a grey loading bar that says "Loading Files" and then from there it goes to the green loading bar. This has happened to me once before, although, it was fixed in just a couple of days. I removed the main power cord and left it out for a day and when I tried again, it worked. I've tried doing that now, but no such luck......
View 7 Replies
View Related
Nov 17, 2009
The next time it started, the graphics were all screwed up and when it gets to thebit after the Windows Loading Bar it goes to a Blue Screen of Death. The computer then restarts and the same thing keeps happening. I tried running the computer in Safe Mode but it doesnt work either :/ neither do any of the other Advanced Options.
View 9 Replies
View Related
Aug 31, 2009
when I had to open Internet Explorer (I use Mozilla) to access my school email account. Everything went fine and when I was done I reopened Mozilla to browse again. I got one of those annoying spam web popups saying I had a computer infection and clicked out of it. A few minutes later my pc just randomly rebooted. I have had viruses before but it has never shut down randomly before. So I immediately restarted in safemode and ran my spyware tools. I found 3 trojans (I no longer remember their names) and removed them. I rebooted and it starts to load windows but reboots before it reaches the user account screen. I can get into safe mode and I did run my spyware tools again, they didn't find anything at all. I figured I had somehow damaged my system and so I downloaded a windows repair disc and repairedit. It didn't work. I've run startup repair and that didn't work or find anything wrong either.
View 6 Replies
View Related
Aug 28, 2009
I am currently using my Dell Inspiron in safe mode as I cannot use it in normal mode without freezing soon after loading. For some reason, the Ms Help page says there is a prob with my Product ID so I can't get help there unless I pay for it. I have just had Service Pack 2 installed but the problem started before that upgrade. Also, in device manager, under Network Adaptors, I have 6TO4 adapters 'unable to start' and also ISATAP adapters similarly unable to start. Would these events be the cause of the freezing? I don't have more than 1 anti-virus running.
View 5 Replies
View Related
May 27, 2009
Recently one of my hard drives underwent a bizarre process where it decided to revert back to RAW. After 4 days of problem solving I finally fixed the drives but also purchased 2 new/better drives. I run a RAID-0 Striping set-up. I have done every trick in the book to decrease the excess fluff from running in the background of windows vista but I still get delayed loading times. If I right click to attempt to create a folder or something such as that, the circular loading icon appears as it takes 2-3 seconds to open. And it does this with most everything, some things take longer than others.
I only ask what could be the cause of this because this never happened with my former drives or vista for the past year, it only started after the one hard drive crashed and it has done it since the fix and since the installation of the new drives. Everything use to open practically instantaneously....My only assumption is that there is something trying to load but I have tried disabling everything and it still does the same thing.
View 6 Replies
View Related
Jun 4, 2008
i get this messege "hp que status has stoped working" what is that?
View 6 Replies
View Related
Mar 23, 2008
Because of a mistake I made while installing Vista, I wound up with the system files (about 1.6 Gig) on one small D: drive while all of the remaining Windows files (over 50 Gig) on the large C: drive. I now want to remove the D: drive and replace it with a large one. How do I move the system files to the C: drive?
View 4 Replies
View Related
Jun 7, 2009
I cannot always load windows Vista Home in normal mode.
I did a log and it seems to hang here:
Did not load driver @nettun.inf,%6to4mp.displayname%;Microsoft 6to4 Adapter
There are a number of these listed.
I can boot into safe mode, I have run a registry check using regcure, but no joy. I still cannot boot into normal mode, it just gets to the bar going accross and nothing happens.
I have SP1 installed.
The problem appeared to occur after trying to upgrade AVG Antivirus, but I removed this, cleaned out all entries pertaining to AVG in Registry, but this did not solve the problem.
View 9 Replies
View Related
Aug 24, 2008
I’ve removed all my external hardware, usb devices, printers etc… Expect the monitor, mouse and monitor.
I’m at a loss this problem started small freezing every once and while(I leave my computer on all the time) now I can’t get more then a minute or 2 into the desktop.
I’ve tried a lot of stuff and am hoping for further insight.
Specs.
Vista Home Premium 32bit
HP Pavilion a1357c
AMD64 x 2 4200 2.2ghz
3 g ram
Nvidia Geforce 8600 GT 512
View 9 Replies
View Related
Apr 9, 2010
Everytime i switch on my PC, it loads perfectly well but afterwards there are some pop ups windows which says:
1. Could not load or run 'c:usersmyNameLocal' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying. 2. Could not load or run 'settingapplication' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying 3.Could not load or run 'Dataasdlfj3service.exe' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying
4.Windows Defender window pops up saying: application failed to nitialize:0x80070006.The handle is invalid Even if you go to the Accesssories then System Information you get: Windows cannot find C:windowssystem32msinfo32.exe.Make sure you typed the name correctly and try again. The same thing happens when you go to Accessories, then command promt you get windows cannot find c:windowssystem32cmd.exe.
View 5 Replies
View Related
Aug 26, 2008
a friend pointed this out to me as a great program to use. I download it..and it doesn't work. They don't have an official Vista build yet, but they have a page that tells you how to work around it. I think I've done everything right, main thing is that Vista's driver signature stops it, b/c Phoenix Labs hasn't purchased one yet, so I disable that and all should work fine, but I get a failed file error instead. I assume it's from a corrupt file, when downloading, but I've tried several downloads and nothing worked. So anyone have any ideas on how to get it working, or anyone have a program that works the same as PG?
View 6 Replies
View Related
Mar 28, 2009
i got The Elder Scrolls Oblivion game of the year edition, a few weeks ago and have been having problems installing on my computer since. I put the disk in and nothing happens, the computer does not read it. when i go into computer and double click the dvd drive it should be in, a message appears asking me to insert the disk. I bought this computer from pc world around two months ago. my computer runs 64bit vista im wondering if this could be the problem? or could it be my graphics card has not got the performance to play the game therefor my computer does not run it. iv done a restore of where i turn everything off in the background to see if the disk will be read, and the same old thing happens.
iv been wanting to play this game for a year or so now and cannot seem to fix the problem. iv spoked to the oblivion technical help service and they still cannot conclude the problem. also i rang pc world up and they told me to try to speek to the game designers and ask of a patch or online download where by i can download straight to my computer. i so far cannot find any patch or download to take from oblivions site, and have not found the number to get in contact with the game designers.
View 5 Replies
View Related
Feb 24, 2010
i have a vista home premium with a 138GB HD (82GB full, 56GB free) on an HP pavillion computer. my computer is about 2-3years old.
1) how long does it take to defragmentation for the 1st time? the last time i did it (and the 1st time, with all the info above, my computer didn't finish even after 12hrs+. unfortunately, defragmentation does not have some loading bar, so i could not tell if the thing just stopped or it was just taking a super long time.)
2) also, when i did defragmentation for the 1st time, my computer started losing free space! what's going on?
View 8 Replies
View Related
Apr 30, 2008
I have not downloaded yet too afraid.has anyone actually seen any improvements after loading sp1
View 4 Replies
View Related
Sep 25, 2008
Suddenly my labtop with vista primum and ie7 browser loading pages but missing the fotos and images !! i click refresh some fotos reappear and others dont I have't done or add anything to my comp what would be the problem ??
View 3 Replies
View Related
