I’ve removed all my external hardware, usb devices, printers etc… Expect the monitor, mouse and monitor.
I’m at a loss this problem started small freezing every once and while(I leave my computer on all the time) now I can’t get more then a minute or 2 into the desktop.
I’ve tried a lot of stuff and am hoping for further insight.
Specs.
Vista Home Premium 32bit
HP Pavilion a1357c
AMD64 x 2 4200 2.2ghz
3 g ram
Nvidia Geforce 8600 GT 512
I am running the Hardware in my sig. the machine runs all 04 OS perfectly, 'cept Vista32Bit. I upgraded to the VX2235WM from the Benq FP72E (a 22" 16:10 and 17" 4:3 respectively) first on the 8800GTS 320MB, everything was fine, when one day, the desktop after loading Vista, just dissapeared, there was nothing, no wall paper/gadgets/taskbar/ icons...nothing, except for my mouse cursor, and by default a window "My documents" open, and showing contents. At first i was under the impression that it was my GPU/DVI cable/or the LCD, after 03 months (in pakistan there are NO consumer rights...so you fight or call in favours to RMA, and then get a new replacement piece) i got everything changed, still no dice......
i used the 163.04/09 and the latest WHQL 169.25....no display used the VX2235 drivers from MS update nad WHQL's from Viewsonic's website Changed the GPU to the 8800GT XFX, in the hope that just perhaps the
broken VC2 engine might be causing troubles, used the same..............
New computer. Vista Home Premium. FSX continually stops loading and have to restart the loading process. Six times to get it loaded, but all sytems not functioning. Loaded Accelerator crashed whole system had to do repair of FSX and start over again with continual stoppage. Don't know where to go from here. It worked fine with XP
View 9 Replies View RelatedFirst after doing an ordinary restart, my vista (ultimate) gets stuck for a LONG time at the loading screen and does not move, with the green loading bars. this happens every time i try to restart. i pop in my original vista disk and start the repair process...it says it found something wrong with my startup and it found what was wrong and that it was repaired. after this i get the message NTLDR, which is a whole nother problem. i ran the below to fix the NTLDR...
1. Put the Windows Vista installation disc in the disc drive, and then start the computer.
2. Press a key when you are prompted.
3. Select a language, a time, a currency, a keyboard or an input method, and then click Next.
4. Click Repair your computer............
I cannot always load windows Vista Home in normal mode.
I did a log and it seems to hang here:
Did not load driver @nettun.inf,%6to4mp.displayname%;Microsoft 6to4 Adapter
There are a number of these listed.
I can boot into safe mode, I have run a registry check using regcure, but no joy. I still cannot boot into normal mode, it just gets to the bar going accross and nothing happens.
I have SP1 installed.
The problem appeared to occur after trying to upgrade AVG Antivirus, but I removed this, cleaned out all entries pertaining to AVG in Registry, but this did not solve the problem.
I can't get it to work. I tried running as administrator and no luck. I have a Asus G2 series gaming laptop-OS Vista Home premium 32 bit. The game installed great, but as soon as I click on the shortcut from the desktop it will flicker a black screen and just return me to my desktop. I tried putting my computer in a 800x600 resolustion and still didn't start it.
View 9 Replies View RelatedI have a pc with windows xp media centre edition, running flight simmulator.. I installed the accelerator kit on it.. now its not starting up...getting blue screen saying either "uninstall your antivirus program or driver" I can not load it to safe mode to do that, I have run the repair from the recovery system still no luck.
View 6 Replies View RelatedEverytime i switch on my PC, it loads perfectly well but afterwards there are some pop ups windows which says:
1. Could not load or run 'c:usersmyNameLocal' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying. 2. Could not load or run 'settingapplication' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying 3.Could not load or run 'Dataasdlfj3service.exe' specified in the registry.Make sure the file exists on your computer or remove the reference to it in the registry.when i click on ok, another pop up comes saying
4.Windows Defender window pops up saying: application failed to nitialize:0x80070006.The handle is invalid Even if you go to the Accesssories then System Information you get: Windows cannot find C:windowssystem32msinfo32.exe.Make sure you typed the name correctly and try again. The same thing happens when you go to Accessories, then command promt you get windows cannot find c:windowssystem32cmd.exe.
a friend pointed this out to me as a great program to use. I download it..and it doesn't work. They don't have an official Vista build yet, but they have a page that tells you how to work around it. I think I've done everything right, main thing is that Vista's driver signature stops it, b/c Phoenix Labs hasn't purchased one yet, so I disable that and all should work fine, but I get a failed file error instead. I assume it's from a corrupt file, when downloading, but I've tried several downloads and nothing worked. So anyone have any ideas on how to get it working, or anyone have a program that works the same as PG?
View 6 Replies View Relatedi got The Elder Scrolls Oblivion game of the year edition, a few weeks ago and have been having problems installing on my computer since. I put the disk in and nothing happens, the computer does not read it. when i go into computer and double click the dvd drive it should be in, a message appears asking me to insert the disk. I bought this computer from pc world around two months ago. my computer runs 64bit vista im wondering if this could be the problem? or could it be my graphics card has not got the performance to play the game therefor my computer does not run it. iv done a restore of where i turn everything off in the background to see if the disk will be read, and the same old thing happens.
iv been wanting to play this game for a year or so now and cannot seem to fix the problem. iv spoked to the oblivion technical help service and they still cannot conclude the problem. also i rang pc world up and they told me to try to speek to the game designers and ask of a patch or online download where by i can download straight to my computer. i so far cannot find any patch or download to take from oblivions site, and have not found the number to get in contact with the game designers.
i have a vista home premium with a 138GB HD (82GB full, 56GB free) on an HP pavillion computer. my computer is about 2-3years old.
1) how long does it take to defragmentation for the 1st time? the last time i did it (and the 1st time, with all the info above, my computer didn't finish even after 12hrs+. unfortunately, defragmentation does not have some loading bar, so i could not tell if the thing just stopped or it was just taking a super long time.)
2) also, when i did defragmentation for the 1st time, my computer started losing free space! what's going on?
I have not downloaded yet too afraid.has anyone actually seen any improvements after loading sp1
View 4 Replies View RelatedSuddenly my labtop with vista primum and ie7 browser loading pages but missing the fotos and images !! i click refresh some fotos reappear and others dont I have't done or add anything to my comp what would be the problem ??
View 3 Replies View RelatedI have been unable to load and use itunes because of a DEP message that pops up on screen shutting down the program.
I have done the following:
*uninstalled the programs itunes and quicktime
*uninstalled the programs completely using Crogram files - the additional way of uninstalling.
* reinstalled/uninstalled both programs about 4 times
* reinstalled quicktime as a stand alone program
* used Windows installer clean up
I can't turn DEP off by selecting itunes and putting into the marked exception box because an error message tells me that itunes MUST operate with DEP. It will not drag it into the box.
When I start the PC, after the loading bar for Microsoft thing finishes,instead of going to login screen it gives me a blue screen, and it says Page_fault_in_nonpaged_area.
View 9 Replies View RelatedI was hoping that some of you guys could help me with a problem. As the title says, my screen goes completely black after the loading screen with the green loading bar, but before the usual windows vista circle is supposed to appear. I have also tried to use a vista x64 recovery disk. Here I only get the blue background a mouse I can move around on the screen, meaning I have no options to choose from. Does anyone know what the problem might be? And if so, how to possibly fix it?
View 9 Replies View RelatedI've tried everything to fix my Dell Inspiron 1545 running Windows Vista Home Premium 32bit and I can't seem to work out what to do anymore. My laptop automatically did some updates earlier today and I rebooted as advised, unfortunately it failed to load up at all and I got a screen telling me windows has failed to start. Problem could be due to a recent change of hardware or software. The only recent change being the updates. I've tried to do a system repair, which hasn't worked. All it does is load a blank screen with, eventually a movable mouse cursor, nothing else happens after. I've tried to load from the boot cd also, but I have the same problem.
The white bar loads, message saying windows is loading files then as soon as its passed the blank screen and mouse cursor come up. I can't load anything in safe mode as it just comes up with the windows failed to start message. I'm at a loss, I think. And if I can't reinstall windows then it looks like my laptop is messed up completely. All I haven't tried is perhaps loading safe mode with command prompt and trying to do a system restore, and Repair Install For Vista this, which I'm not quite sure I understand fully. I might have had SP1 installed already. Anyone got anything they can chuck my way to advise me to do? I haven't had the laptop all THAT long.
When i start up my vista has problems loading things and can pause. Yet sometimes it lets you log on, but when you log after 20 seconds it can freeze(but the arrow moves around the screen). I can get on safe mode perfectly(I am using now). This is the second time it happened, and the 1st time i had to format, and i am not willing to do that again.
View 9 Replies View RelatedList of Parts:G. Skill 4x2gb DDR2 PC2-8000 ram Intel Quad Core 2.4Ghz cpu Gigabyte GA-X38-DS4 motherboard BFG Tech 8800 GTS (G92) gpu thermaltech toughpower 700w psu Western Digital Caviar WD2500 hd Chi Mei 22" LCD Sound Blaster Audigy SE sound card LiteOn optical drive Problems started today when i tried to turn on my computer, im running Vista Home Premium x64. The loading bar screen would show up and then after that it would go black like usual, but then my monitor would show that there was no input available and the computer would hang in this state forever. Any suggestions? I know a new HD would probably fix it all but im not sure i really want to spend all the money, literally just built this baby 2 weeks ago!
View 7 Replies View RelatedThis isn't a big deal but it can be quite irritating. I have a brand new machine with Windows Vista Business running on it. This is the main machine in the study and has a Belkin router connected to it via a cat5 cable. The rest of the PCS/Laptops in the house run from the routers wireless. Everything is set up and internet explorer loads automatically on each machine.
However, on this newer machine, when I click on Internet Explorer, it takes around 8-10 seconds to load the homepage, i.e google. On all of the other machines, its pretty much instant. The other machines are running XP/Vista Home and Vista Basic. They all load the webpage instantly................
where it boots up to the loading screen is fine, slows down and stops, then it will bring me to blue screen and restart to the point where it has black screen telling me boot up was unsuccessful, and i can go into all 3 safe modes or boot normally, have tried all of them and non of them even boot
View 6 Replies View RelatedI scan my computer and remove the malware that I had. Now when I start the computer I get a message that RUNDLL loading is a error. I get that it cant load C:userappdatalocalloweppyrpl.dll wont load. I can find anything to fix it.
View 6 Replies View RelatedWhen I go to control panel and try loading Program and Features, nothing happens. In other words, I can't uninstall or repair anything because I can't even get passed loading this page.
View 5 Replies View RelatedWhen I click on Windows Update, it just hangs with the circle cursor spinning. All that opens up is a white box, and nothing happens. I had no issues running Update 2 days ago. It just started this yesterday out of the blue. IDK if it is related, but I also can't update drivers in Device Mgr. It just keeps searching the web for drivers, and nothing ever happens.
View 5 Replies View RelatedWhen my computer is loading up at the desktop screen a message comes up saying Error loading c:windowssystem32hetirika.dll. I looked up hetirika.dll and found out it's a trojan/backdoor. I can't find it in Windows>System32 either.
View 6 Replies View RelatedI've got a problem with msoe.dll no loading in mail. I'm getting a error message as i try and launch mail and not allowing it to boot. he anti virus software hasn't changed, possibly a new update? Anyway i've found the msoe.dll and downloaded a new one to replace it but... it wont let me replace it and i tried to replace in safe mode and still not allowing me. or ways i can replace the msoe to try to see if that works?
View 4 Replies View Relatedi just been given tomb raider underworld but once the run the set up i get a box pop up asking for different requirements size of screen etc click ok then it will say failed to initailaze direct 3d with current settings. i have changed them and played about but still nothing. is it my system? the game? do i have a game card?
View 4 Replies View RelatedI am thinking about getting a Solid State Drive. I prefer to get the intel brand, and the 80GB is within my budget. (The Intel X25-M) The speed performance boost is the reason I am interested. If I want to keep my documents and games on my standard hard drive, and load Vista completly on my new SSD drive, would it be a good idea? I know that my x64bit Vista Ultimate is at least 40GB, but not 100% sure if thats it. Plus I know it needs some extra space for other "stuff".
View 3 Replies View Relatedi have a sony vaio windows vista home preim.4gb ram, intel dual core, been playing kuma for a while, tried to run the game no good, all so internet explorer,google crome keep getting.
View 3 Replies View RelatedI want to rename /Desktop/Linux_Mag_Bugs.eml to /Desktop/Bugs.txt A right click on the icon does not give me the opportunity to change the suffix. Question: How can you change a file suffix?
View 9 Replies View RelatedA few days ago my display settings would not save and each time I restarted my computer they were different. I thought it would not get any worse however now when i start my computer the screen goes black just after the green loading bar. The computer is still on because it makes hard drive noises and my quickplay buttons are blue but the computer does not respond. It starts in safemode but it won't start normally. I have Vista Home Premium 32 Bit with Service Pack 1. Any help would be greatly appreciated to get rid of this black screen.
View 4 Replies View Related