I have been unable to load and use itunes because of a DEP message that pops up on screen shutting down the program.
I have done the following:
*uninstalled the programs itunes and quicktime
*uninstalled the programs completely using Crogram files - the additional way of uninstalling.
* reinstalled/uninstalled both programs about 4 times
* reinstalled quicktime as a stand alone program
* used Windows installer clean up
I can't turn DEP off by selecting itunes and putting into the marked exception box because an error message tells me that itunes MUST operate with DEP. It will not drag it into the box.
I am having trouble installing iTunes on windows vista 32bit. It downloads ok but when i try to run it error msg is 'itunes setup is not a valid win 32 application' i have checked and version 8 iTunes should be compatible with vista. I can't even install quicktime.
New computer. Vista Home Premium. FSX continually stops loading and have to restart the loading process. Six times to get it loaded, but all sytems not functioning. Loaded Accelerator crashed whole system had to do repair of FSX and start over again with continual stoppage. Don't know where to go from here. It worked fine with XP
First after doing an ordinary restart, my vista (ultimate) gets stuck for a LONG time at the loading screen and does not move, with the green loading bars. this happens every time i try to restart. i pop in my original vista disk and start the repair process...it says it found something wrong with my startup and it found what was wrong and that it was repaired. after this i get the message NTLDR, which is a whole nother problem. i ran the below to fix the NTLDR...
1. Put the Windows Vista installation disc in the disc drive, and then start the computer. 2. Press a key when you are prompted. 3. Select a language, a time, a currency, a keyboard or an input method, and then click Next. 4. Click Repair your computer............
My PC locks up when trying to install iTUnes at the point where it is saying to me. "Registering iTunes automation server". Ive done everything that the iTunes help section has suggested still no luck.
I had a game I wanted ot make work but DEP kept stopping it so I turned off DEP by using the command prompt. bcdedit.exe/set {current] nx AlwaysOff and it worked. I then restarted Vista and all I get is a quick flash of a blue crseen and then two options, 1) Repair and 2) Start normally. I have restored to an earlier point, I have also tried safe mode, I pressed F8 and tried starting with last known working settings and also F8 then a repair option, opened a command prompt and tried reversing the command but it didn't seem to do anything.
In a message there is 39 files I need to download and I'm only getting 36, saying that my security is stopping some files...how can I get these 3 files to download?
I have the problem that when I restored my computer to an earlier time I had uninstalled Threatfire but it is still there and I can't get rid of it now. It is stopping me from downloading other programs! When I try to delete the folder in programs it tells me that I can't as I do not have the rights to do it even though I am the administrator and sole user of the computer. I have used CCleaner to try to remove it but it does not work either. I have tried in safe mode also.
At some point I have pressed the 'receive updates for other products' on the Windows Update panel. I now have half a dozen updates for Office 2007 waiting for installation. I do not have Office 2007 - I do have Office 2000 and Works, so I don't see any point in downloading and installing these updates.I have tried hiding the updates, but because they are 'important' they reappear. Is there any way of deselecting the'other products' option so I go back to only checking for Windows updates?
I've been reading the Threads here and on other Forums with regards to the IE issue of it stopping working on Vista. I've tried all the suggestions I have found to date (including uninstalling OneNote, repairing registry issues etc etc) and I still can't get the damn thing to work. Every time it loads I get the message saying Internet Explorer has stopped working. I normally use Firefox, but have to be able to test websites in IE so must get it working.
I tried to uninstall Antivirus 2008 on my computer. I tried nearly everthing, but nothing seems to work. I am not even sure how it got on my computer. It is stopping me from going online, and says i have tons of viruses. I don't. I already have a virus protection program (McAfee from AOL). How do I uninstall it completely
I had a problem with my Microsoft Vista print spooler (spoolsv.exe) stopping on Data Execution Prevention (DEP) violations from the time I installed my HP and Lexmark printers. This has been only an irritation to date as I have set the spooler to always restart 1 minute after failure. However lately I am having more programs stop on DEP violation. The Microsoft Vista??? WMI Provider Host??? has stopped several times on DEP. I do not know what the ???Vista WMI Provider Host??? does. I did not see any adverse results with the Microsoft Vista??? WMI Provider Host??? stopped. So far my DEP violations have been random and inconsistent. The print spooler stops on DEP even when both printers are off. I have performed hardware checks as recommended by Dell and the computer hardware tested OK.
I want to be able to stop users being able to change the auto-hide setting of the taskbar on a windows vista machine. Anyone any ideas how to do this? I want it to be set to always auto-hide so the solution either wants to stop the user being able to change this or maybe as a second solution if they do change it then i want it to be reset when the machine is rebooted.
how to make a batch file where you could start, disable, stop and manual for a service from the command prompt? for example instead of going to services.msc and right clicking on a service then clicking on properties then making the startup to be manual,automatic or disable. I could do with a batch file where i would just launch the batch file and it would make the startup to manual and then disable the service that i want to disable.
If you are an iTunes user and have purchased any songs from the on-line store you may have some issues when trying to authorize your computer to play back your songs. While authorizing your computer to play your purchased songs iTunes will say everything was successful but you will still not be able to play your songs. Why? Because iTunes is being bad and trying to write to a part of the registry that a normal user does not have access to.
Currently Apple has said they are working on a Vista compatible version of iTunes. For now, there is a work around that will help you play your purchased songs in iTunes: ...
have just got into itunes and can't burn cd. I get message that reads "Can not burn cd. An unknown error has occured." Can burn music with Media Player using my own library with no problems.
I recently had to do a clean install of vista (my hard drive stopped working) and so I had to reinstall all my software. Well I have two versions of iTunes on my computer (x86 and x64 versions) and I've installed the x64 version and i get this error message whenever I try to start up iTunes, but it installs with no problem.
I have a Dell Inspiron E1705. Worked fine until I performed some tweaks on this site to increase performance and Windows upgrade. I run Vista, of course..Vista forum. I did this two or three weeks ago. It's irked me and I'm just getting back to trying to resolve it. I looked at system restore, but it only goes back a week? What would happen if I load Windows 7 Beta? I saw this mentioned somewhere else. I've looked at services, drivers. I just want my audio to work. Everything I look at says my audio is working. Itunes won't work. The progress bar in Itunes won't work either.
Everytime I try to add a digital copy of a dvd or blu ray into my iTunes it says I do not have the access privilages. I am the administrator and my computer is definately authorized with my iTunes. I emailed Apple, and the guy said it was probably a Vista issue, and was unable to help me. Is there anyone out there with similar problems and a way to fix it? It is rather frustrating.
I hated the new colour scheme when iTunes 9 was released, with the harsh white background. Is there any way to change it back to the black/grey without installing anything????
I have Vista Home Premium 64 Bit SP2 and cannot install iTunes.
Today I downloaded the newest version from Apple's web site. Installation proceeds normally for awhile then I get the error below (it appears in box labeled " iTunes + QuickTime".
Could not open key: UNKNOWNComponentsDA42BV89BF25F5BD0AF18C3B9B1A1EE87E577B2224C654E801A9E52375DB49. Verify that you have sufficient access to that key, or contact your support personnel.
I navigated to the key (substituting HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionInstallerUserDataS-1-5-18 for UNKNOWN above) and found 3 instances of the key. 1 had data, 2 were empty. I deleted the 2 empty iterations. I had read about running regedit as an administrator and trying to change the permissions so that the owner was "adminstrators" instead of "system" but was unable to change the ownership (maybe because I have not uninstalled the older version of QuickTime that I used to get things working). Anyway I would like to install the 64 bit version of iTunes now but need to get past this problem. Additional info: I noticed that iTunes 64 bit selected as the install directory C:Program Files (x86) instead of C:Program Files. I have tried installing in each of these directories with the same results.
My system state is now that everything with iTunes in uninstalled with the exception of QuickTime 7.3.1 which I use to run a program that I use often.
however i went to install Itunes 8 (64bit) and have this issue when i startup the program. I have all updated drivers, and no hardware conflicts presently that i'm aware of.. It's starting to get frustrating not being to update my phone/Ipod etc, so i'll paypal $20 to the first person that can provide me with a solution.
I was ok for a a few hours, but something has caused my iTunes to stop operating properly. I can bring the app up. I can see the songs just fine. But, when I attempt to play them, nothing happens. They won't start. Either will a CD or a song sample at iTunes store, or a MySpace audio file, or my Band in a Box music software.
I keep getting a message that iTunes is NOT the default app for these files (upon opening iTunes) but it is set to be the default. Config: Dell 2.8GHz, 4GB Ram, Vista 32bit, iTunes 7.6, E-MU 0404 external audio interface
I'm running 32 bit Vista and I can't install iTunes. I've done the whole VBscript thing, bu I"m still getting the Microsoft Windows error message that "iTunes installer has stopped working" and no other details. Any ideas on why I'm getting this?
I have I tunes on both the laptop with WindowsXP and on the newly acquired Desktop, HP Q 8200 with Vista 64. For the latter I have downloaded the latest recommended version for Vista64, but even though I can see the imported and saved ( on an external hard drive) play list I can not play them. When I click on them on this new Vista 64 empowered Desktop, nothing happens.When I click on Beethoven folder ( which contains many creations by composer) I can see nothing in the right panel regarding the overture, for example.
On the laptop I have exactly the same play list and all works fine there. Audio is OK, because when I go to the I-tunes store with the desktop, I can listen to the songs. _________ Information from ESET NOD32 Antivirus, version of virus signature database 4386 (20090901) __________The message was checked by ESET NOD32 Antivirus.....
How to get music from other people's ipods to your iTunes Want to get music from your firends' ipod to your iTunes? Worry about deleting the their ipod's music? This step by step guide shows how to get music from other people's ipods. It can help when you want to take music off other people's ipod and download it to your computer itunes without deleting the other ipod's music.Tool you need: Cucusoft iPhone/iPod/iTouch to Computer Transfer - transfer music from iPod to computer,ipod to itunes , iPod to iPod, iPod to iPhone, iPod to iTouch, iPhone to iTouch, etc. Please Note: Before you run our program, please be sure you have installed iTunes on your computer, and you can manage the ipod devide with no problem.
Step 1: After the iPhone/iPod/iTouch connected to pc, Launch the program you will see the right UI. Normally, the program will search the device automatically. If the device is enabled, the files (songs/movies/photos) will be shown in the list.
Step 2: Choose the list and files you want to transfer , Click the Export button.
Step 3: After you clicking the Export button, the following window will pop up, you can choose transferring to computer or iTunes directly. You can set the output folder at Advanced->Options before transferring.. Transfer music from iPod to computer, or transfer songs form iPod to iTunes
Step 4: When the transferring finished, the following window will pop up. It shows that how many files have been done. You can click the OK button to view the output files..Download Cucusoft iPhone/iPod/iTouch to Computer Transfer, Buy it now. You can know more features about it by referring here. If you are using Mac.You can use this Mac iPod to iTunes Transfer Program.
I wanted to change my destination location for the "My Music" folder to be an external hard drive, since I am a professional musician and my music takes up a great deal of space. However, something strange has happened so I now cannot open my Itunes folder, and when I click on the "My Music" folder there is NOTHING--all of the tabs that had previously been there are gone, and it just has the general tab with o bytes. My music is still on the computer (I can find it under my name...music) but I cannot figure out how to restore the link from the "My Music" to this.
