Is SP1 And Other Updates Necessary Before Upgrading To Windows 7?
Nov 17, 2009
Is Vista SP1 necessary or recommandable before upgrading to Windows 7? Many people these days is upgrading from Windows Vista preinstalled on the PC to Windows 7. In case of a complete recovery it's necessary to reinstall Windows Vista and then upgrade to Windows 7 (if you have bought an upgrade and not a complete Windows 7 version).
Yesterday I did a complete recovery and did a reinstallation of Vista Premium. After installation of Windows Vista I have so far done approximately 100 Windows Vista updates and is now continuing with SP1.
I have a Windows7 upgrade and plan to upgrade Windows Vista to Windows 7. Could I had saved time upgrading directly from Windows Vista in the original edition without all the other updates before upgrading to Windows 7, or was, and is it correct to take this detour?
i currently have windows vista ultimate 32 bit x86 but i'm thinking of upgrading to 64 bit ultimate but is it worth it? I'm sure you get asked this a lot but just wondering if it's worth it.
Back in November, I explored the number of editions of Windows 7 that Microsoft was working on. While the company has not officially given a list yet, it was clear that Windows 7 Enterprise Edition and Windows 7 Ultimate Edition were definitely coming. Furthermore, there was an obvious avoidance of naming a Windows 7 Business Edition, though there was a mention of a Windows 7 Small Business Edition. While doing a little more digging, I stumbled on the following upgrade paths for Windows Vista to Windows 7. These are not confirmed, but I am told they are what Microsoft is currently considering: Windows Vista Home Premium Edition => Windows 7 Home Premium Edition Windows Vista Business Edition => Windows 7 Professional Edition Windows Vista Ultimate Edition => Windows 7 Ultimate Edition Full Story: Rumor: three options for upgrading from Vista to Windows 7
I just received my upgrade Windows 7 disks. Ive followed the steps and everything appears to be ready to upgrade for vista... Ive tried the upgrade process 2 times and both times my computer got to 62% of the final part of the install and sat there from 11pm until 730 am. what is the problem? bad software?
I just recently upgraded to Windows Vista. All my olf files were saved to a folder on the same computer. How do I reinstall these programs such as Nortan Internet Sevurity? I tried to use Windows easy transfer but you can only do it from one computer to another and not from the same computer?
I would like to install Windows 7 on top of my existing Vista Ultimate installation thus retaining all the programs and data. I realize this may not be the best way to move to the new OS but I can't bear the thought of having to reinstall all the programs if I do a clean install. Will it be possible to do this and if so, what are the drawbacks?
My son is running Vista Home Premium onto his machine and just downloaded Windows 7/RTM and he wants to install it desperately. I'm hesitant to do so: it's easy to "uninstall" Windows 7 and revert back to Home Premium if he thinks that he made a mistake?
I will personally wait until SP1 for Windows 7 before I mess with installing it. Due to the way Vista was when it first came out, I believe upgrading to Windows 7 right on release date would be a very bad bad idea.
I have a HP Pavilion dv6 1140ea. It is able to upgrade to Windows 7. I downloaded Windows 7 Upgrade Advisor Version 1.0 and all softwares were compatbile. Windows 7 Upgrade Advisor 2.0 was released, I got it. I did a scan if anything was compatible. In 4 programs it said 'Before Upgrading to Windows 7, we reccomend unistalling this program. It can safely reinstalled after the upgrade'. And I know that they will work on Windows 7. But other people don't bother reinstalling, they just upgrade simply, I don't want to reinstall the programs again as they are compatible with Windows 7.
Even HP said that the software are compatible and you can upgrade just like that. I got two softwares that are ATI Catalyst Install Manager and Catalyst Control Centre, now I don't know were to download them off. I don't want to reinstall the programs, do I have to reinstall it, even though it is recommened?
im having problems with my hard drive and im going to install my windows vista ultimate 64 bit in a new hard drive, what should i do to reactivate my windows if im living in Dominican Republic? i dont wanna loose my windows
Upgrading from Vista Home Premium to Windows 7 and using Windows Mail, does the upgrade preserve the mail folders and Windows Mail untouched, or is Windows Mail removed so I have to do a backup of the mail folders before the upgrade and install a new mail program (Outlook or WLM) after the upgrade? I prefer to continue with Windows Mail and have previously tried to get used to WLM without success.
I'm running Windows Vista Home Premium 64-bit edition Dutch Version, updated with SP1 and all the patches/updates until today. However, I have encountered two problems lately, that might be related. During one of the last Windows update sessions, one of the recommended updates was KB940157: Windows Search 4.0 for Windows Vista for x64-systems (11,8MB).
The update downloaded succesfully, created a restore point, but then during installation of Search 4.0, windows update stops and announces an update fail error:
Failed: 1 update Errorcode: 800F0900
I've been googling this particular error code in combination with KB940157, but it doesn't bring up any entries. Then later on, I discovered that when I go into the Windows Components window (via Control Panel, Add/remove software), the entire windows stays blank (first it says "Wait a few moments..."). This only lasts a few seconds then shows a complete empty window.
I can get the good old Windows Update interface back, somehow the interface as changed for something that is less usefull and easy to find what update I need to do or not.
Just wondering why anyone would turn OFF the Windows automatic updates? The update options give the user that choice and I just don't see why anyone would choose that. Isnt the whole idea of automatic updates to keep your PC up to date with important Microsoft information?
i installed service pack 2 and other updates on this computer and now when i log into the computer the vista sound freezes and it will do a memory dump. It did this twice one at boot up and installing updates. I have never had any problem like this before and i'll put all the information about the error and the computer i am using.
Computer Error "Windows has recovered from an unexpected shutdown".............
Desktop PC will be one year next month. I did not renew the Microsoft Office after trial period that came as a package w/ no future intention of acquiring it. I'm using the free Open Office program - word processing mostly at this time. Is there anything in the list below that is of importance? I only have a basic PC with DVD player for movies, etc. No scanner, printer or fax. Not even external hard drive or usb flash drive. Otherwise, I understand that I can just choose to hide the updates, so it will not keep reminding me. Also, I choose to keep my OS w/ Srvce pk 1 and MS IE version 7 for as long as I'll be able to. I had too many probs with Srvce pk 2 and MS IE version 8. Your opinion, if any, is welcome.......
My windows update is unable to check for updates, an whenever I manually check for updates, Install now shows up, once the installation process begins, a couple of minutes go by and windows returns to checking for updates, and I am right back to Check for updates for your computer. I've checked the history, and so far KB948610 has failed 4 times, and KB953733 once in the past (windows apparently never tried again).
I've tried everything to fix my Dell Inspiron 1545 running Windows Vista Home Premium 32bit and I can't seem to work out what to do anymore. My laptop automatically did some updates earlier today and I rebooted as advised, unfortunately it failed to load up at all and I got a screen telling me windows has failed to start. Problem could be due to a recent change of hardware or software. The only recent change being the updates. I've tried to do a system repair, which hasn't worked. All it does is load a blank screen with, eventually a movable mouse cursor, nothing else happens after. I've tried to load from the boot cd also, but I have the same problem.
The white bar loads, message saying windows is loading files then as soon as its passed the blank screen and mouse cursor come up. I can't load anything in safe mode as it just comes up with the windows failed to start message. I'm at a loss, I think. And if I can't reinstall windows then it looks like my laptop is messed up completely. All I haven't tried is perhaps loading safe mode with command prompt and trying to do a system restore, and Repair Install For Vista this, which I'm not quite sure I understand fully. I might have had SP1 installed already. Anyone got anything they can chuck my way to advise me to do? I haven't had the laptop all THAT long.
I work as a computer repair technician on a college campus and had a question about windows updates. A little background, we do anywhere from 1 to 10 Vista installs a day, any version, mostly 32bit. We do have a program that will automatically install the OS for us and even some programs that we preconfigured. Pretty much we just enter the key and come back when the desktop appears. The install already contains SP1 and SP2. The problem comes when we go to update Vista, it takes FOREVER it seems like.
So my question is, is there any harm in downloading the Vista updates as standalone and having our Installer Program install them when the OS finishes installing. Is there a certain order that they have to be installed in? I also noticed that the Windows Update program installs some updates, has you restart, and then installs some more updates, and restart again. Would we have to restart in between update installs?
I've searched this forum and all over google and the only thing i can find is slipstreaming SP1 and SP2. We are just trying to make the install process faster so we can return the student computers back to them.
windows updated, now when it restarts it keeps coming up with "Configuring updates" stage 3 of 3 0% Do not turn Off, its done this for many times. how to skip this stage when starting windows
The initial configurations done as per the setup and wizard instructions provided by hp. After some time, suddenly the system performace was too slow and it has given me a huge shock and made me think like i've wasted my money! BUT after installed the windows updates, it's performance increased tremendously. There is always the alert which shows install Windows updates. Even when i tried to shutdown the system, it pops up 'Install Updates and shut down'.
So i've installed the updates almost every day otherwise it will not allow me to perform any operations. Is this expected behaviour? Can't we work without installing any windows updates atleast for a month? I am afraid may be some performance issue on this model! Due to these every day installation of windows updates, its killing my hard drive like anything.. Intially, in C drive, the free space was 243 GB of 260GB, now its reduced to 225GB of 260GB. I am loosing my memory because of this updates.
Wondering if you guys can offer up some good advice. I have had my pcfor about 8 months, all was working fine until a couple of months ago when after some automatic updates and a reboot, windows failed to load. I got a black screen with the following message
file name : NTOSKRNL.exe status : 0XC0000098
Windows failed to load because a required file is missing or corrupt: Then it advised me to reboot from the cd and repair the program. Which i did, and then instantly turned off automatic updates, as i didnt want to risk the same thing happening again. And it seemed to be working fine, for about 2 months i guess............
Will I still get Windows Updates if I don't install the Service packs for Vista & XP? If that happens won't my system be obsolete? remove "nospam" in order to email me.
My computer continually starts up with the icon "windows can't check for updates", I have tried disabling/enabling Windows Firewall many times and re-trying the installation but nothing works.
I received 4 updates today and all 4 installed however one update KB961371 showed error 800703F9. While configuring updates it would show Stage 1 of 3-0%complete. Then it would show updates not configured propertly. I tried this several time, same results. I did a system restore and then tried installing only the security update, same results. After this I reinstalled the other 3 update with no problem. This is the first time I have had a update not to install. I am using AVG Internet Security 8.5 version, however I don't think this is the problem as I have received over 130 windows updates inthe past. I do have windows set to install updates automatically every day. I have contacted MS with this information but have not received a answer. To tell the truth I trust the forum more. I look up some information and this update applies to 2008 windows server Itanium-based system. I have a HP Pavilion s3120n with AMD 64 live processor.
The last time windows update found anything new to download was 4 weeks ago on Sept.9.I manually update at least three times a week.When I try to update it goes through the normal 30 second or so search routine but all I ever get is No New Important Updates Are Available For Your Computer statement. I have gone to hidden updates and was able to download an update that was about 2 months old with no problem.I have Malwarebytes and VIPRE security so I normally have Windows Defender turned off,but on two seperate ocaisions I have turned Windows Defender back on and Windows Update searched and found updates and I had no problem downloading and installing them.It even found the update for the newer Windows Update that I agreed to and insalled. My computer is a VISTA Ultimate 64xbit and is kept up to date as much as possible.
For the past week or so, Windows Updates list some updates, but when I click INSTALL, it then state PREPARING TO INSTALL, and after a few minutes it just gives me an error that SOME UPDATE WERE NOT INSTALLED, and it is all the updates that are not installed. When it is for Defender I can always go downloaded them manually, but the others I can not because I do not know how to find them, so I would like to know how to fix this the error is WindowsUpdate_80246008
I did a Windows Update for 12 Important and Recommended Updates on 6/1/2009. Ten days later I had to do a System Restore to a date before those updates. What is the status of those 12 updates? Are they still there? Do I have to install them again? If so, how do I do that?
