I did a Windows Update for 12 Important and Recommended Updates on 6/1/2009. Ten days later I had to do a System Restore to a date before those updates. What is the status of those 12 updates? Are they still there? Do I have to install them again? If so, how do I do that?
View 5 RepliesI ran Windows Update on my Windows Vista Home Premium. Now I want to use System Restore to a time before I ran the update. What happens to the updates that were installed? Am I supposed to reinstall the updates? How?
View 5 Replies View RelatedA friend's Vista SP1 PC is failing to install Windows Updates and also some other updates such as those for Itunes. The symptom is that the updates get downloaded but the installation phase never finishes (he's left it for 12 hours!). In the case of the Windows Updates, there are several updates that try to install themselves as the PC is shutdown or even restarted, but the message "Installing 1 of 6" never advances: the only recourse is to switch the PC off.
As I was looking at the PC, I noticed one thing which may have a bearing on this and may even be the cause: the System Restore applet (windowssystem32 strui.exe) fails to run. It displays an initial User Account Control window but the "Restore System Files and Settings - choose a restore point" window never appears. No error message is displayed and there are no entries in any of the Event Log logs.
It occurred to me that if System Restore is buggered, this might prevent any updates working if the first thing they try to do is to create a restore point before installation begins. I can't find any reference to System Restore failing to open its initial Window - I've looked on support.microsoft.com and done a general Google search for "Vista System Restore fails". All the info seems to describe possible problems if you get slightly further and select a restore point which then fails to install properly.
Problem signature:
Problem Event Name:APPCRASH
Application Name:iexplore.exe
Application Version:8.0.6001.18241
Application Timestamp:48ae8fee
Fault Module Name:kernel32.dll
Fault Module Version:6.0.6001.18000
Fault Module Timestamp:4791a76d
Exception Code:c06d007e
Exception Offset:000442eb
OS Version:6.0.6001.2.1.0.768.3
Locale ID:2057
Additional Information 1:5e45
Additional Information 2:a2fdfe7c86f01abc55834702e464686d
Additional Information 3:84fc
Additional Information 4:b9417b166caabe190aef712546e2a930
Ive Tried the remove updates thing and it isn't their. I have no system restore point. And I've tried running itin no addons mode. All I want is to roll back to IE7
It all started with failed updates. Then I discovered that I couldn't run the check disk utility. A friend finally gave me a solution sfc /scannow in DOS which told me I had some corrupted files that windows couldn't fix. It told me to check out the log - but I couldn't find it. Now I discover (Having read a thread in VistaForums about the update error code 80070652) that I no longer have tabs in my Task Manager. aaaoorrrgh! I going nuts. how to restore these functions without losing all my data and updated drivers etc. (I'm not a beginner but I'm a sort of low level intermediate)
View 4 Replies View RelatedAfter today's windows update I've been experiencing many blue screen, especially after the reboot. I don;t get any in safe mode so I guess it's a driver problem. This is the minidump created on my system. I have 7 of them and they all seem to be the same.
Code: ADDITIONAL_DEBUG_TEXT:
Use '!findthebuild' command to search for the target build information.
If the build information is available, run '!findthebuild -s ; .reload' to set symbol path and load symbols.
FAULTING_MODULE: fffff80001c1b000 nt......
How to disabling windows system restore, I followed the procedure that windows help provides but i can not uncheck the c drive on: computer/(right click) properties/ system protection because there is a message that says "configuration is disabled by group policy". You should know that this is my home computer, is stand alone not connected to any network or domain and I am running as administrator.
View 5 Replies View Relatedthere are so many updates that need to be download and install. the first time i have run the update my laptop kept on rebooting when installing an update. it kept telling me its installing 3of3. i had to restore my system. now i have to update again.
View 4 Replies View RelatedWhy can't I use system restore to restore back to certain restore points? I was only successful twice with it. When my laptap was new and when I used it after re-formatting my hard drive. On all occassions after those two instances I can never restore back to any restore point. It always says that "unspecified error" line. If Microsoft doesn't know what happend, how could I. Why did they bother putting system restore if it doesn't work all the time anyway. It gives you a false sense of security.
View 5 Replies View RelatedMy laptop (Advent 8117 running Vista if that helps) has been working fine, then this morning things went pear-shaped. To begin with things worked as usual - Everything seemed to load up as normal, I left the room for maybe 5-10 minutes and when I returned there was a black screen. I waited a while and nothing happened so I restarted. It comes up with 'Windows failed to start. A recent hardware or software change might be the cause.' From there I can either start normally or run a repair. It doesn't seem to matter what I click here because I get a 'Techguys' support thing come up either way but now nothing on it works. To begin with I ran the Repair Environment, but it couldn't fix it. I also got to try a System Restore but I seem to have no points to restore to. Now I can't get the Techguys page to do anything. So I tried running in Safe Mode but once again I'm faced with the unmoving Techguys page, and the same goes for when I try and load from the Last Know Good Configuration. I desperatly don't want to have to lose everything.
View 9 Replies View Relatedeverytime i restart the computer my system restore point that i made by my self is deleted and when i open system restore center i get a messege that no restore points were made and i made one my self further more i can see the file in systyem restore folder aproximatly 300mb but after restart he's not there what the problem could be?
View 8 Replies View RelatedI'm sure this problem is easy to solve. It's just that I can't see it.Because Vista has been causing me so many problems (blue crash screens, system restore doesn't work etc) I must restore to factory settings, wiping the c: disk and starting again. I have backed up all files on an external drive. The problem is that I can't see how to import all my mail accounts and mail history back into Windows Mail which will have been reloaded from new.
View 5 Replies View RelatedAfter installing SP2, on 5/25, System Restore seems to have stopped creating automatic restore points every 24 hours. I checked the Task Manger and it is set for 24 hours. It shows a restore point being created on 5/26. System Restore shows the last Restore Point being created on 5/25 about 1 hour after downloading.
View 5 Replies View RelatedI have a recent problem installing Windows updates on Vista Ultimate as the update process stays on 'creating restore point' forever. I've let it run as long as 7 hours in this state, with no change. It looks like the system is unable to make a restore point sucessfully. I know it has worked in the past, as I'm fairly up-to-date on Windows updates. Reading some other threads, I've tried using Disk Clean-up to remove all by the most recent restore points, and then try to disable/re-enable system restore - this part without success. When I check the system properties for System Restore, the System Restore button is greyed out. I've attached a screenshot of the screen for reference. I've checked the group policies to verify the System Restore is not disabled there.
View 9 Replies View Relatedrunning Vista Home Premium (32-bit). When you log into Windows, you immediately get the error "Windows Explorer has stopped working". Then it says explorer is restarting, restarts your desktop, then is ok for about 3 seconds. The error then pops back up and it is stuck in that loop.
It started when he clicked on some popup he shouldn't have. I removed a trojan identified by Mcafee as exploit-byte verify. I have also disabled all startup programs and services (except windows services) through msconfig. However, I am still getting this error popup. Unfortunately, he had previously turned off the system restore option and got rid of the recovery partition.
I went to accessories/system tools/system restore and clicked it. I then got a small dialogue window asking if I wanted to continue and I clicked continue. That little window disappeared but then nothing hasppened. I was expecting to see a list of possible restore points but nothing showed on my screen. I clicked system restore again and got a message that system restore was already running and would now exit.
View 9 Replies View RelatedNot sure why but when I try to open system restore I get this message: "System Protection Settings has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available." I cannot make or restore my computer. If I go into system protection I get this error: C:WindowsSystem32SYSDM.CPL is either not designed to run on Windows or it contains an error. Try installing the program again using the original media or contact your system administrator or the software vendor for support.
View 9 Replies View RelatedI am new here and I have been having problems with my laptop for at least a few months now. And now I am fed up with it and just want to do a full system restore. I have no disks or previous system save dates. I talked to one of my friends and he said that i need a disc. I am just coming her for confirmation and or help. I am running a Toshiba Satallite P505D with and AMD Turion X2 dual core processor 4GB of Ram and a 64 bit operating system.
View 5 Replies View RelatedI wish the ****ing dumbass companies wouldnt preload computers with useless trials and dumb****. Ever since this computerwas purchased, I've had more problems than Lindsay Lohan had with DUI and drugs.
Holy ****. Games, Personalization, System Restore, System Backup (Error code 1068), User Accounts, and Windows Update. They show up, and then they dissapear right away. Any help please? Virusscan'd with AVG, tested hardware, it's clean, I dont know whats wrong.
My wife was on the internet and suddenly System Pro popped up and started scanning warning my wife of a virus attack on her computer and wanted her to buy the AV Pgm for $49.95. She just clicked all the exits and got off of the internet and now she is locked out of her computer. We can't get system restore to work, Can't get safe mode to work, She has AVG 8 installed but cannot start it. Tried SFC /scannow but was denied access. Tried putting the Windows XP disk in to do a repair and was unable to get it to start. I think the only thing to do is reformat the HD and start over but her PC ignores the A drive and the dvd drives. I cannot get into it in order to re format it.
View 9 Replies View RelatedI am trying to get rid of system restore shadow copies on my Vista home premium. I keep getting system error when I try to reduce the room used on my C drive as I only have 28gb of 145gb left. I have tried typing in:vssadmin list shadowstorage For the above command to run you must use elevated privileges:
1.. Click on the Start menu then click All Programs / Accessories
2.. Right Click on the Command Prompt option and from the drop down menu click on the Run as Administrator option
3.. At the command prompt type vssadmin list shadowstorage and Press Enter
(NOTE: if the command does not run change directories to c:windowssystem32) After the vssadmin has executed you will see results similar to the following:.....
The output above shows space used on the C: drive by System Restore is 237.419 MB. The maximum space allocated for System restore is 2.092 GB To view the number of restore points you currently have on your Computer run the following command vssadmin list shadows Next, to reduce the allocated space used by Vista's System Restore, use the following command: vssadmin resize shadowstorage /on=[OnVolumeSpec:] /for=[ForVolumeSpec:] /maxsize=[MaxSizeSpec] Where example: vssadmin resize shadowstorage /On=C: /For=C: /Maxsize=1GB When decreasing the space allocated to System Restore, you will loose the earlier system restore points. The advantage is gaining extra free space. If you are concerned with losing the previous restore points, wait until you do not need them anymore before reducing the allocated space. If you plan on upgrading to Windows Vista or running a clean install and will need extra space, consider reducing the space after installation has completed. It is not recommended to disable System Restore. The capability to restore to a previous point in time or having the new Shadow Copy feature available can be a time saver if something goes wrong or if you delete a file. source: John Barnett Windows Vista Support I keep getting an error message. I seem to remember doing this before with my XP but can't remember how. Is there an easier way?
I've been facing issues with backup / restore / system restore
View 7 Replies View RelatedThe mystery, at least to me, my PC was running almost 2 years. and it was not until about 3 weeks ago that System Restore began to save Restore Points the size of Approx 3 to 4GB daily. Prior to that the Restore Points were well under 1GB. it would be 3 to 6 days before I noticed the loss of 1GB. So why suddenly would the Restore File grew 1 one day from well under 1GB to between 3 to 4GB? That now is the issue I would like to know the answer to. and perhaps that file being saved with each Restore Point is not needed. I mean it wasn't needed for almost 2 years. so I can't think over night it became important but it sure is eating up HDD space.
View 5 Replies View RelatedTrying to restore my system but when I attempt to see the restore points Vista tells me the wizard is already running the this program will close.
View 9 Replies View RelatedAfter installing these two updates: .NET Framework 3.5 Family Update (KB959209) x64 Update to .NET Framework 3.5 Service Pack 1 for the .NET Framework Assistant x64 (KB963707), The performance of my PC drastically slowed down during start-up and running of other processes and programs. I decided to uninstall them; and the performance seemed to be back to normal. My question is: Are these updates really necessary for my PC; do I absolutely need them?
View 7 Replies View RelatedI remember with WinXP that if I had my computer turned on and was not using it for a certain length of time (maybe 30 minutes), it would 'automatically' create a 'System Checkpoint' in the System Restore area. I could also 'manually' create a 'System Checkpoint.' What I would like to know is - doees Vista (Home Premium) create such an 'automatic' System Checkpoint if I have notebook turned on, but don't use if for about 30 minutes?
(I believe there is a way to turn on an Automatic 'System Checkpoint' that you can schedule to be done at a certain time. That is not what I am talking about. I am talking about an 'automatic' System Checkpoint' that is done if the computer is turned on, but not used for 30 minutes or more (approximately).
Sometimes, after installing MS updates or other apps, I lose my sound. The only way I get it back is to use System Restore to a point where the sound worked. However, then I don't have the updates or apps. This tells me that it's a software problem with Vista - not a hardware problem. Now, I am about 11 MS updates behind - and no sound. Also, the System Restore doesn't work anymore (I no longer have a Restore point where the sound worked). I've Googled and have found that many people have similar problems with their HP laptops. I am using Vista, SP-2. I am now going to ionstall the updates since I can't go back to get the sound. I've checked in Device Manager (no problem) and made sure I'm using the most recent signed driver. I can't find any text indication that I have a problem but when I go to Playback Options and try the sound Test, I get a message which says the sound didn't play. Hope I included all the relevant information. If not, please tell me. I've tried everything I know of. I have a full backup of my hard drive
View 7 Replies View RelatedIt was suggested to do a system restore to correct the problem of my computer restarting itself, which started after an update. I'm concerned if I will lose my files since that time if I do a system restore. Or what does it restore? Can someone explain it a little more to me....
View 5 Replies View RelatedEvery time I try to run System Restore I get an error message saying that the restore was unsuccessful because of an error. Try again with a different date
View 9 Replies View RelatedIt seems no posible to restore the system from previous "restore points" with Vista Bussines. I always get the message "System restore did not complete succesfully. Details: The writer experienced a transient error (0x800423F3)."
View 7 Replies View RelatedI'm using vista 64 for the last 2 months and it worked quite good in general. Yesterday after downloading some automatic updates (and i don't think this was the cause for what i specify next...) the system started working very slow, with sudden freezes, slow reaction to clicks on icons, starting programs etc. Another annoying issue that the system started booting very slow: after the green marker which shows after booting, there's a very long stop before i get the log on window. What's really strange is that i don't see the harddrive working in this time...it seems like freeze, like the one happens when the windows is up and running.
My system is intel quad q6600 cpu, 4gb 800 mhz memory,gigabye dq6 680i motherboard,and new hitachi sata2 hardrives. Does it sounds more like hardware problem? (till yesterday all was good!)or more like windows problem? (i have a backup of the system from 2 months ago,right after i installed the system, but no more backups and restore points....)