Recognise Headphone And Speaker As Different Output Devices
Dec 30, 2008
I want to do is have my headphone to have a different audio stream than my speakers so that I can talk to a friend through my headset and receive the voice audio, but to also have through my speakers sound from other programs. Basically I just want the system to recognise the speaker and my headphone as different output devices instead of tieing them together. The software I'm using is Realtek Audio Manager and it hasn't been helpful whatsoever, I've had two computers and I've had the same problem with them both.
View 6 Replies
ADVERTISEMENT
Dec 23, 2007
Ive recently installed vista ultimate 64 and previously in xp i could set the speaker setup to be headphones in the sound options, however in vista there is no selection and its setup as just speakers. Ive set in x-fi modes and console etc to be headphones so everything is fine then but im slightly miffed as to why its saying speakers in the control panel -> sound section in windows not the x-fi. It also shows it as a speaker icon and not headphones so i dont know if this is conflicting.
View 9 Replies
View Related
Nov 22, 2009
I have an Asus G 50vt, a few days ago I had it hooked up to a stereo system and tripped on the wire connected to the Audio jack. The Headphone jack now has half of the head stuck inside and I was unable to remove it. I am wondering if there is a way to reassign the headphone output to the Line in or Mic in jacks?
View 6 Replies
View Related
Jul 19, 2008
I got an ASUS M50SV with integrated Realtek HD ALC888S audio and the problem is in the speaker configuration, it only shows stereo. i cannot change it because its grayed out. The laptop also has S/PDIF output but the Realtek HD Audio Manager doesnt recognize it.
View 9 Replies
View Related
Apr 14, 2009
My Vista crashed. I am looking for a change the mic input for stereo-rear speaker output?. Also which can perform a system restore to an earlier date.
View 4 Replies
View Related
Mar 16, 2009
My Laptop (Toshiba A355D-S6930; Vista HP 64bit) using ALC272 (6.0.1.5689) Realtek soundcard and only have a mic and a headphone jack. Is there anyway to change the mic input for stereo-rear speaker output?
View 4 Replies
View Related
Mar 23, 2008
I just added more memory to my Dell Insperion 530. Which is very simple. But now the speaker icon in the lower right has a red X. When I put the arrow on it I get the following: "No Audio Output Device is Installed".
View 7 Replies
View Related
Feb 18, 2010
When I hover over the sound icon, it said "No Audio Output Device Installed". I have had this laptop for over 2 years and this is the first time this has happened.I have been reading several posts and many of them say to go to the "Sound, Video & Game controllers" tab in the Device Manager. However, that tab doesn't exist for me. I even clicked "Show Hidden Devices".
View 8 Replies
View Related
Mar 31, 2009
So today when I go to plug in my headphones into my laptop, the video I was trying to watch today still is playing through the main speakers. I tried multiple pairs of headphones and it still didn't work. The volume coming from the speakers doesn't even shut off, it just keeps playing even though I have headphones plugged in.
View 5 Replies
View Related
Mar 16, 2009
I have a GW M6307 with Vista HP 32bit. The headphone jack has suddenly stopped working. I have done a restore back to when it was working..uninstalled and reinstalled audio drivers without results. The IDT control panel indicates something else is plugged into the jack both for the mic and HP. I also reinstalled the MS audio drivers that came with the machine. I cannot find any default anywhere to change any setting regarding this. The laptop speakers work but the default to HP when plugged in does not. The speakers conitnue to play with no sound in the HP.There are no indications of a loose connection and the laptop sits on a desk most of the time.
View 7 Replies
View Related
Mar 23, 2008
Front panel microphone and headphone doesn't work Win Vista, I have onboard Realtek HD Audio ALC880, last driver version R1.88. So it work fine Win XP only. I think Vista realtek driver hasn't full support of ALC880?
View 5 Replies
View Related
Nov 9, 2008
I have just got a Zennox DV5210 but I cannot get my laptop to recognise it because the disc that they have provided is only compatible with XP and Windows 98. Is here anyway I can get the laptop to recognise this digital camera?
View 4 Replies
View Related
Jun 30, 2008
im using vista ultimate x64
with 4gb ram,512mb vga card,celeron d.my problem is why my directX only
recognise 3326mb while the windows and bios startup showing 4096mb(4gb)
View 9 Replies
View Related
Dec 15, 2008
i'm having a problem with my new cpu. i just bought a HP M9402f. i believe the graphics card is integrated into the mother board due to the fact that there is nothing in the pci -e slot, but there is a small chip int he pci-1 slot. the chip looks way to small to be the nvidia card. anyways, i put in an ATI Radeon HD 4650 into the pci-e (16) slot and then i changed the bios to that slot for the video card. however now when i restart the cpu it does not seem to find the card at all.
View 7 Replies
View Related
Apr 13, 2009
am getting a windows security login window but it will not recognise any name and password that i enter. When i cancel i get the following error message: I Account: 'mail.applybuilder.com', Server: 'mail.applybuilder.com', Protocol: POP3, Server Response: '-ERR Authentication failed.', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92 I have been into Tools : Account, and set and reset my email name and password countless times now but I cannot get past this problem.
View 4 Replies
View Related
May 24, 2009
This issue has popped up a couple of times on the forum, but none of the solutions seem to work for me...
I'm running Vista Ultimate on a Dell XPS1330 notebook. I used the Vista back up computer tool to make images of the system c: drive and a second data partition. These were written to a USB hard drive as H:ComputerNameBackup 2009-05-22 162639etc. I have since formatted and re-partitioned the on board hard drive and expected to be able to restore my system and data onto the new partitions. I have tried to restore from a Vista Recovery CD and from within Vista, after re-installing, but it always fails to see the backup.
I have also tried copying the back up folder onto a ntfs partition, but it still wasn't recognised.
View 9 Replies
View Related
May 17, 2008
Vista Ultimate 32bit isn't recognising my mouse or keyboard on boot. They both work in bios, the setup cd, and ubuntu Linux, on the same PC. This all started when I had to repartiton my drive - I moved the partition vista was on to the start, and deleted a partion i had there. When I tried to boot after doing this, it said there was no bootmanager present, so I put in the vista update disk and that fixed it. Windows booted as normal, but now, when it gets to the login screen, the keyboard and mouse do not work. They are not USB, they are enabled in BIOS, I've tried a hard reset, and I have tried in safe mode.
View 5 Replies
View Related
Nov 8, 2008
I've been running Backups regularly using the Control Panel, Backup and Restore Center. I've recently noticed however that my movie files weren't being backed up. The file type is '. MOD' saved by Panasonic camcorders. The 'video' and 'additional files' boxes are checked in the settings dialog. I spotted the problem after adding loads of movies to the computer and noticing the backup didn't need a new DVD (previous one nearly full) then I checked the backup files and '.MOI' files were copied from the folders but not the '.MOD' files. Is there any way of getting the backup utility to recognise these files?
View 4 Replies
View Related
May 11, 2009
I have a brand new Gateway GT5694 desktop computer, using Windows Home Premium (x64). I have a set of Altec Lansing speakers which I've plugged into it, which worked very well with my previous XP computer. There's an echo in the audio output that's so bad that speech is barely intelligible. There's also mild distortion in music. Headsets work fine when I switch to those; no echo at all. Speakers consist of a small left and small right
speaker, and a sub-woofer. They're powered speakers. The speakers' green input plug (only one) is plugged into the green, speaker output on the computer. I've tried all the other 3.5mm outputs, and none of the other outputs work at all insofar as producing sound. I've tried different settings in the Control Panel (Manage Audio Devices).
View 9 Replies
View Related
Jun 5, 2010
In my 'program files' folder I see subfolders with names I don't recognise, do not appear under 'control panel - uninstall a program', nor on the start button 'all programs' option. Is it safe to delete them ?
View 9 Replies
View Related
Mar 23, 2008
My Vivitar 4100 camera worked fine with old Windows XP O/S. New PC operates on Vista Home Basic. Downloaded camera CD but the system doesn't recognise. Is there any way I can still use this perfectly good camera on my new system? Tried downloads from Vivitar site, but no advice re updating to Vista or even if it's possible. All I want to to is take a photo, download to PC and then use for any items I sell on ebay.
View 9 Replies
View Related
Feb 24, 2008
I am wondering if i decide to reformat windows, and I have windows and apps on my drive, but all my storage on D, when I go to delete partition C to make a new one for windows new, What will become of my D drive? Will i have to delete my D drive partition as well before i can install windows on my C? Or for my new windows to recognise D.
View 7 Replies
View Related
Jun 7, 2008
In order to use another microphone, I disabled the webcam microphone. Now the icon for the webcam mike does not appear, in the recording devices. How do I reenable the webcam microphone?
View 9 Replies
View Related
May 29, 2009
The speaker icon has disappeared (lower right). I have no control of the volume and it is set to zero. I need volume control - machine is useless to me without it. How do I get it back and prevent it from disappearing again?
View 6 Replies
View Related
Jun 22, 2009
I was given a pair of Logitech Z-10 USB Speakers. I'm running Vista 64. I've never seen a USB speaker system....Not sure how they work. Will I have problems with these speakers? Will they use my sound card? Do they put a heavier load on the CPU than a sound card? I've downloaded the latest 64bit drivers, but they are dated '07, so I'm not sure if I want to try these.
View 5 Replies
View Related
May 18, 2009
No sound will come through the speaker or headphones in Vista, I checked the drivers in control panel's device manager utility. Does anybody know what could be blocking the signal?
View 7 Replies
View Related
Sep 6, 2009
I have 2 pcs one with xp pro, other is vista business 32bit on laptop. Using a 750gb samsung hd753Lj internal hard drive in a sumvision external enclosure with usb2 and e-sata connection, but i only have usb connection. ALl works fine on xp computer, but when i plug into vista i get the error in the system tray saying "usb device not recognised". In device manager it says "unknown device." have tried all 4 usb ports on laptop, have tried using it via mains powered usb hub and still no joy.
View 4 Replies
View Related
Sep 4, 2008
I have on-board sound chipset by Realtek ALC888, I installed The driver from the Motherboard cd (vista drivers cd) and no sound, i tried to get the latest versions from this forum and still the same problem, I tried even plugging the cable in different ports in the back panel and still its a mute system ! Everything is fine on XP, i don't know what to do, Should i get a new sound card or new speakers
View 9 Replies
View Related
Oct 15, 2009
My speaker starts humming when i plug the mouse into the front panel USB port. I have 2 front panel USB. The humming more prominent with the mouse plugged to one of them. There is no humming when connected to back ports. There is no humming when a pen drive is connected to either of the front ports! I tried another mouse on the front and that causes humming too. The front panel is a single PCB with 2 USB and the headphone and mic jacks (AC97). My speakers are connected on the rear. Probably some irreparable problem on the front panel PCB, but if someone has experienced a similar problem and solved it
View 9 Replies
View Related
Oct 8, 2008
there is no 2.1 speaker option in realtek hd control panel.
View 8 Replies
View Related
Mar 23, 2008
For some odd reason now when I single click an item in the start menu or single click an item on the desktop my speaker produces a single beep. I had event sounds for Menu Command and Menu Pop-up (this beep wasn't assigned.) but have removed the sound just for testing. I don't even have this sound anywhere in my sounds folder.
View 4 Replies
View Related
