For some odd reason now when I single click an item in the start menu or single click an item on the desktop my speaker produces a single beep. I had event sounds for Menu Command and Menu Pop-up (this beep wasn't assigned.) but have removed the sound just for testing. I don't even have this sound anywhere in my sounds folder.
View 4 RepliesI recently upgraded to Ultimate 64-bit on my HP laptop. I was recently using Dev C++ and when I tried running one of my scripts I noticed that the beeps that I had added wouldn't work. So I checked my device manager and noticed that the system beep wasn't there.
View 9 Replies View RelatedI bought a new graphic card but I needed a wire to install it to. But my power supply didn't have that so I used another power supply but that had 20 pins and my mobo 24 pins. So I bought a converter but it still didn't work. So I installed my old power supply again but now my pc starts without the beep and there is no contact with the monitor. Also these wires (see pic) got loose so I returned them to there places but maybe not in the correct order, is that the problem??? EDIT: ok so now I know its important to have the plugged correct, these are loose now
powe sw
reset sw
hdd led
power led+
power led-
speaker
btw. I didn;t mean to unplugg them.
my new vista laptop keeps making a "toot-toot" sound when i am on the internet.
View 5 Replies View RelatedRunning a SONY VAIO Pentium D with Ultimate SP1 and every now and then when I do a restart or a hard reboot the machine will sit there. All the drives run but no joy and no beep. Then I turn it off and it may start or it may not. This machine is getting near three years old and is on 18+ hours a day. Everything else is fine and there are no other issues with it. I am thinking it may be the mobo battery.
View 7 Replies View RelatedWhenever i try to download anything it just make a little beeping noise when the downloading is done and then when i go to check where my program is it's gone,
View 8 Replies View RelatedI left it on running for several days on top of a cooling pad fan to avoid any overheating. There was basically no activity or nothing running except BitTorrent downloading some files over wireless LAN. I have Avast antivirus installed. All possible drivers updates/service packs were downloaded and installed. The notebook runs on the latest BIOS version from HP. Suddenly, the computer beeped loudly a few times and the screen showed white colour patches everywhere that covered up a large portion of the screen, then got frozen completely. The only thing I could do was to switch it off by pressing the power button 6 seconds. After booting it up again, I couldn't see much information in the event viewer that tells me what went wrong.
Another horror story: I had a few tabs opened on IE7. I went to a website with java applet for chat room. Once I clicked the Java applet, IE7 suddenly crashed/disappeared. No error reporting or anything - it just took place so suddenly. I could not repeat this problem as it seems intermittent.It does make me feel that after a year's wait, I still have no faith in Windows' reliability. I wonder how many more centuries will they take to create a rock solid high performing computer for home/business?
I have a brand new Gateway GT5694 desktop computer, using Windows Home Premium (x64). I have a set of Altec Lansing speakers which I've plugged into it, which worked very well with my previous XP computer. There's an echo in the audio output that's so bad that speech is barely intelligible. There's also mild distortion in music. Headsets work fine when I switch to those; no echo at all. Speakers consist of a small left and small right
speaker, and a sub-woofer. They're powered speakers. The speakers' green input plug (only one) is plugged into the green, speaker output on the computer. I've tried all the other 3.5mm outputs, and none of the other outputs work at all insofar as producing sound. I've tried different settings in the Control Panel (Manage Audio Devices).
In order to use another microphone, I disabled the webcam microphone. Now the icon for the webcam mike does not appear, in the recording devices. How do I reenable the webcam microphone?
View 9 Replies View RelatedThe speaker icon has disappeared (lower right). I have no control of the volume and it is set to zero. I need volume control - machine is useless to me without it. How do I get it back and prevent it from disappearing again?
View 6 Replies View RelatedI was given a pair of Logitech Z-10 USB Speakers. I'm running Vista 64. I've never seen a USB speaker system....Not sure how they work. Will I have problems with these speakers? Will they use my sound card? Do they put a heavier load on the CPU than a sound card? I've downloaded the latest 64bit drivers, but they are dated '07, so I'm not sure if I want to try these.
View 5 Replies View RelatedNo sound will come through the speaker or headphones in Vista, I checked the drivers in control panel's device manager utility. Does anybody know what could be blocking the signal?
View 7 Replies View RelatedI got an ASUS M50SV with integrated Realtek HD ALC888S audio and the problem is in the speaker configuration, it only shows stereo. i cannot change it because its grayed out. The laptop also has S/PDIF output but the Realtek HD Audio Manager doesnt recognize it.
View 9 Replies View RelatedI have on-board sound chipset by Realtek ALC888, I installed The driver from the Motherboard cd (vista drivers cd) and no sound, i tried to get the latest versions from this forum and still the same problem, I tried even plugging the cable in different ports in the back panel and still its a mute system ! Everything is fine on XP, i don't know what to do, Should i get a new sound card or new speakers
View 9 Replies View RelatedMy speaker starts humming when i plug the mouse into the front panel USB port. I have 2 front panel USB. The humming more prominent with the mouse plugged to one of them. There is no humming when connected to back ports. There is no humming when a pen drive is connected to either of the front ports! I tried another mouse on the front and that causes humming too. The front panel is a single PCB with 2 USB and the headphone and mic jacks (AC97). My speakers are connected on the rear. Probably some irreparable problem on the front panel PCB, but if someone has experienced a similar problem and solved it
View 9 Replies View Relatedthere is no 2.1 speaker option in realtek hd control panel.
View 8 Replies View RelatedI want to do is have my headphone to have a different audio stream than my speakers so that I can talk to a friend through my headset and receive the voice audio, but to also have through my speakers sound from other programs. Basically I just want the system to recognise the speaker and my headphone as different output devices instead of tieing them together. The software I'm using is Realtek Audio Manager and it hasn't been helpful whatsoever, I've had two computers and I've had the same problem with them both.
View 6 Replies View RelatedIve recently installed vista ultimate 64 and previously in xp i could set the speaker setup to be headphones in the sound options, however in vista there is no selection and its setup as just speakers. Ive set in x-fi modes and console etc to be headphones so everything is fine then but im slightly miffed as to why its saying speakers in the control panel -> sound section in windows not the x-fi. It also shows it as a speaker icon and not headphones so i dont know if this is conflicting.
View 9 Replies View RelatedBecause of the recent fiasco with Creative / Daniel K the straw has broken the camels back and I am trying real hard to not use my X-Fi XtremeGamer, and never buy Creative again. Although I didn't personally have many issues with it (and Alchemy is great for Vista...wish there was one for everyone) I don't want to spend my life wondering what will happen next with my drivers..
I have a Gigabyte GA-P35-DS3R rev 1.0. This board has the Realtek ALC889A chip and when I first started using it in XP I was so very impressed with both the quality and the features. Specifically speaker fill. I love upmixing my music to 5.1 and at the time I was having weird issues with Creatives own expansion setting so I happily used my onboard for quite a while.
Then I decided to upgrade to Vista and noticed immediately that things were not working the way they had on XP.. DirectSound removal aside, I couldn't even get music to upmix properly.. So here I am again, trying to get by without my X-Fi and I've installed the latest drivers from Realtek's web site for Vista x64........
My Vista crashed. I am looking for a change the mic input for stereo-rear speaker output?. Also which can perform a system restore to an earlier date.
View 4 Replies View RelatedMy Laptop (Toshiba A355D-S6930; Vista HP 64bit) using ALC272 (6.0.1.5689) Realtek soundcard and only have a mic and a headphone jack. Is there anyway to change the mic input for stereo-rear speaker output?
View 4 Replies View Relatedi just bought LOGITECH x-530 5.1 Speaker system. when i go to "Realtek HD Audio manager" and choose "5.1 speaker" the "rear pair" is grayed out! Here is a picture; if i change it to 7.1. then the "rear pair" will appear and i will be able to preform the test and hear sound... B-U-T ---> when i will play movies.. (divx, mkx, bluray.. ect'...) i don't hear the people talking.. it's like the wrong sound configuration information goes to the speakers. it will seem the people talking coms from the sub-woofer.. and again really really dim... .+ the rear speakers will work but very low (even when i put it on full volume) . any idea how to set up correctly the sound ? so even if i am on 7.1. the sound will go to the speakers as 5.1 and send the right information to each speaker?
View 5 Replies View RelatedI just added more memory to my Dell Insperion 530. Which is very simple. But now the speaker icon in the lower right has a red X. When I put the arrow on it I get the following: "No Audio Output Device is Installed".
View 7 Replies View RelatedI should create a DVD that contains Windows PE 2.1 and Vista SP1 and make sure that Windows PE is always started when I do boot from this DVD.
View 9 Replies View RelatedUsing Windows Vista, how do I remote desktop to a Windows Server 2008
computer running terminal services in single user mode?
(I know how to remote desktop to my Windows Server 2008 computer running
terminal services. I don't know about the single user mode).
Apparently, I'm not in single user mode, because the remote desktop shows
the Vista theme, but not the full Aero experience.
Reference: Introducing Windows Server 2008, by Mitch Tulloch, Microsoft
Press. Page 196, about half way down.
Vista Home Premium SP1. Is it possible to use more than one device in a single USB port? The reason I ask is that I have five USB ports, four at the back and one at the front. As the one at the front is more accessible, I use this for a Joystick I occasionally use. Can I also use this same port for another device, in this case an MP3 player, not at same time?
View 7 Replies View Relatedit may sound but 8gb ram (older modules ddr2 pc6400) isn't enough for my Photoshop work. I was wondering if it's possible to put in the remaining good sticks back in. 12gb (x3) in total , I'm guessing my mboard would drop the speed to single speed ram instead of dual speed ram....Ram capacity is more import than Ram speed as my images are hitting the Photoshop scratch which is bottlenecking my system.
View 5 Replies View RelatedI have Vista Home Premium. I have been using Microsoft Backup & Restore for a few weeks. I am backing up to an external hard drive.My two questions are: (1) Can I restore a single file? (2) Or must I restore everything to get that one file?
View 5 Replies View RelatedI purchased COD5 yesterday and cannot play in Single player mode. I was told that the problem coudl be between my graphics card (Geforce 8800gt) and my network card (Realtek RTL8168B/8111B Family PCI-E Gigabit Ethernet NIC (NDIS 6.0). I think I have the latest drivers installed. I also downloaded the latest directx drivers as well.
View 8 Replies View RelatedWe are all familliar with "Explore" and the Tree structure on the left side, vs "Open", which opens a folder in a single window. Normally, in Explore, as you click on the folders you travel thru the tree and can pretty quickly navigate thru the system, whereas with Open, you can get there, but it isn't quite as easy if you take a wrong turn to back out & recover. Explore is a good name for that option, as that's what it's best for. It also means you don't have to have two windows open to move files, as you can drag to any folder in the nav pane with relative ease. With Open you're better off with multiple open windows for those file relocation tricks..................
View 7 Replies View RelatedQuote: Rumored pictures have popped up of ATI's DX11 Radeon HD 5850, or at least a variant of it. From what we can see, there's an incredibly long PCB for a single-GPU accelerator, an elaborate monolithic cooler, and a single 6-pin power connector. Click this bar to view the full image. Click this bar to view the full image.
View 6 Replies View Related