Speaker Humming With USB Mouse Connected
Oct 15, 2009
My speaker starts humming when i plug the mouse into the front panel USB port. I have 2 front panel USB. The humming more prominent with the mouse plugged to one of them. There is no humming when connected to back ports. There is no humming when a pen drive is connected to either of the front ports! I tried another mouse on the front and that causes humming too. The front panel is a single PCB with 2 USB and the headphone and mic jacks (AC97). My speakers are connected on the rear. Probably some irreparable problem on the front panel PCB, but if someone has experienced a similar problem and solved it
View 9 Replies
ADVERTISEMENT
May 11, 2009
I have a brand new Gateway GT5694 desktop computer, using Windows Home Premium (x64). I have a set of Altec Lansing speakers which I've plugged into it, which worked very well with my previous XP computer. There's an echo in the audio output that's so bad that speech is barely intelligible. There's also mild distortion in music. Headsets work fine when I switch to those; no echo at all. Speakers consist of a small left and small right
speaker, and a sub-woofer. They're powered speakers. The speakers' green input plug (only one) is plugged into the green, speaker output on the computer. I've tried all the other 3.5mm outputs, and none of the other outputs work at all insofar as producing sound. I've tried different settings in the Control Panel (Manage Audio Devices).
View 9 Replies
View Related
Jun 7, 2008
In order to use another microphone, I disabled the webcam microphone. Now the icon for the webcam mike does not appear, in the recording devices. How do I reenable the webcam microphone?
View 9 Replies
View Related
May 29, 2009
The speaker icon has disappeared (lower right). I have no control of the volume and it is set to zero. I need volume control - machine is useless to me without it. How do I get it back and prevent it from disappearing again?
View 6 Replies
View Related
Jun 22, 2009
I was given a pair of Logitech Z-10 USB Speakers. I'm running Vista 64. I've never seen a USB speaker system....Not sure how they work. Will I have problems with these speakers? Will they use my sound card? Do they put a heavier load on the CPU than a sound card? I've downloaded the latest 64bit drivers, but they are dated '07, so I'm not sure if I want to try these.
View 5 Replies
View Related
May 18, 2009
No sound will come through the speaker or headphones in Vista, I checked the drivers in control panel's device manager utility. Does anybody know what could be blocking the signal?
View 7 Replies
View Related
Jul 19, 2008
I got an ASUS M50SV with integrated Realtek HD ALC888S audio and the problem is in the speaker configuration, it only shows stereo. i cannot change it because its grayed out. The laptop also has S/PDIF output but the Realtek HD Audio Manager doesnt recognize it.
View 9 Replies
View Related
Sep 4, 2008
I have on-board sound chipset by Realtek ALC888, I installed The driver from the Motherboard cd (vista drivers cd) and no sound, i tried to get the latest versions from this forum and still the same problem, I tried even plugging the cable in different ports in the back panel and still its a mute system ! Everything is fine on XP, i don't know what to do, Should i get a new sound card or new speakers
View 9 Replies
View Related
May 28, 2009
I have an old Logitech but fully functional mouse (cordless optical).
When I ran Vista x86 Ultimate, I installed a small program that allowed me to double-click with middle mouse button. Now, with Vista x64 Ultimate, it doesn't work anymore.
Do someone know another small program to allow me that?
View 9 Replies
View Related
Oct 8, 2008
there is no 2.1 speaker option in realtek hd control panel.
View 8 Replies
View Related
Dec 30, 2008
I want to do is have my headphone to have a different audio stream than my speakers so that I can talk to a friend through my headset and receive the voice audio, but to also have through my speakers sound from other programs. Basically I just want the system to recognise the speaker and my headphone as different output devices instead of tieing them together. The software I'm using is Realtek Audio Manager and it hasn't been helpful whatsoever, I've had two computers and I've had the same problem with them both.
View 6 Replies
View Related
Mar 23, 2008
For some odd reason now when I single click an item in the start menu or single click an item on the desktop my speaker produces a single beep. I had event sounds for Menu Command and Menu Pop-up (this beep wasn't assigned.) but have removed the sound just for testing. I don't even have this sound anywhere in my sounds folder.
View 4 Replies
View Related
Dec 23, 2007
Ive recently installed vista ultimate 64 and previously in xp i could set the speaker setup to be headphones in the sound options, however in vista there is no selection and its setup as just speakers. Ive set in x-fi modes and console etc to be headphones so everything is fine then but im slightly miffed as to why its saying speakers in the control panel -> sound section in windows not the x-fi. It also shows it as a speaker icon and not headphones so i dont know if this is conflicting.
View 9 Replies
View Related
Jun 28, 2008
Because of the recent fiasco with Creative / Daniel K the straw has broken the camels back and I am trying real hard to not use my X-Fi XtremeGamer, and never buy Creative again. Although I didn't personally have many issues with it (and Alchemy is great for Vista...wish there was one for everyone) I don't want to spend my life wondering what will happen next with my drivers..
I have a Gigabyte GA-P35-DS3R rev 1.0. This board has the Realtek ALC889A chip and when I first started using it in XP I was so very impressed with both the quality and the features. Specifically speaker fill. I love upmixing my music to 5.1 and at the time I was having weird issues with Creatives own expansion setting so I happily used my onboard for quite a while.
Then I decided to upgrade to Vista and noticed immediately that things were not working the way they had on XP.. DirectSound removal aside, I couldn't even get music to upmix properly.. So here I am again, trying to get by without my X-Fi and I've installed the latest drivers from Realtek's web site for Vista x64........
View 9 Replies
View Related
Apr 14, 2009
My Vista crashed. I am looking for a change the mic input for stereo-rear speaker output?. Also which can perform a system restore to an earlier date.
View 4 Replies
View Related
Mar 16, 2009
My Laptop (Toshiba A355D-S6930; Vista HP 64bit) using ALC272 (6.0.1.5689) Realtek soundcard and only have a mic and a headphone jack. Is there anyway to change the mic input for stereo-rear speaker output?
View 4 Replies
View Related
Jan 28, 2010
i just bought LOGITECH x-530 5.1 Speaker system. when i go to "Realtek HD Audio manager" and choose "5.1 speaker" the "rear pair" is grayed out! Here is a picture; if i change it to 7.1. then the "rear pair" will appear and i will be able to preform the test and hear sound... B-U-T ---> when i will play movies.. (divx, mkx, bluray.. ect'...) i don't hear the people talking.. it's like the wrong sound configuration information goes to the speakers. it will seem the people talking coms from the sub-woofer.. and again really really dim... .+ the rear speakers will work but very low (even when i put it on full volume) . any idea how to set up correctly the sound ? so even if i am on 7.1. the sound will go to the speakers as 5.1 and send the right information to each speaker?
View 5 Replies
View Related
Mar 23, 2008
I just added more memory to my Dell Insperion 530. Which is very simple. But now the speaker icon in the lower right has a red X. When I put the arrow on it I get the following: "No Audio Output Device is Installed".
View 7 Replies
View Related
Oct 1, 2009
Since i built my computer I have been having fight with other family members over the internet as our router broke and we have to plug right into the modem (only one can connect at a time). Today i purchased a 8 port 10-100mbps network switch (Buying a router is not possible at this time) I connected the modem to the switch, then my computer and then the home computer. When i connected on my computer, everything was fine (I have vista ultimate x64 sp2.)
I then disconnected and connected the home computer (xp Pro sp3) Everything worked fine. Then I came back to mine and tried to connect and after a bit of waiting i got the message "Error 815" and that the server is not responding. When I do the opposite and connect my computer and then try connect the xp computer, I get the message "Error 676 the line is busy." I can browse both the computers files through network as long as I have the other computers password.Does anyone know a solution to my problem so that both computers can be online at the same time e.g. a shared internet connection from vista pc to xp pc or connect to the internet through the other computer and vice versa? P.S Both computers have kaspersky internet security but i tried disabling them and it still didnt work
View 5 Replies
View Related
Feb 6, 2009
This is not causing any problems, I just don't know why. I have an i7 on a Gigabyte GA-EX58-UD5, gigabit Linksys switch, Norton 2008 firewall, Vista 32bit, and 3 PCs (Vista, Vista, XP) in a LAN. Vista doesn't seem to think a LAN/switch is a real network? I can see all of the other network PCs, connect to the internet (DSL) thru a switch connected Linksys wireless router, share files, and printers; but it's bugging me.
View 7 Replies
View Related
Mar 23, 2008
I'm desperately trying to solve a network problem with Vista to a internet provider.
Nearly brand new PC with nVidia Forceware ethernet controller. After booting the PC, the network ICON in right bottom bar becomes blue. For 1 - 2 seconds the blue bell is visible, then disappears. It shows the PC is connected locally, but not to internet. According to IPCONFIG/all required IP addr, DNS, Default GW etc is set
correctly.
View 5 Replies
View Related
Dec 24, 2007
I went home for the Christmas break and I am trying to get my laptop to connect to the network back at my house. I set up a wireless network through the main computer and have found nothing but problems. The main computer is running XP and I am running Vista. Now, the problem is my computer will detect there is a wireless network available but it will not connect. It let me enter in a password to connect but it tells me there isn't enough strength to connect. This makes no sense due to the fact that it will display 90% network strength.
View 8 Replies
View Related
Jun 16, 2009
The machine has two NICs, both of which are connected to the Internet in the following fashion:
route 1: NIC 1 -- Internet (preferred Internet connection)
route 2: NIC 2 -- Switch -- Linux Cluster -- Internet (preferred LAN connection)
|-------(Printer, NAS, etc)
The linux cluster is consisted of some RedHat workstations, all of which are connected to the internet independently, but one of them (the frontend) also distribute IP and does NAT for the LAN. Also connected to the switch include some network resources, and this Vista machine..........
View 5 Replies
View Related
Apr 14, 2009
I'm re-posting this because it is only visible online at the MS website, not on NewsReaders so.... (I'll try again)...I just installed a D-Link DIR-625 router, before, we had a Linksys router with no issues whatsoever. (This is in secure WPA mode, there is no problem in "unsecure" mode) My sons PC has Vista installed. He has a D-Link wireless usb adaptor. Before, with the Linksys router, hookup was as would be expected, find the SSID, click, a prompt for passphrase, sweet. Now what happens is this... I right click the network icon in the taskbar and select "Connect to a network" a list of available networks shows.( as usual) I click our SSID and a different message appears than before, instead of getting the usual prompt for a simple passphrase, I get a "Windows needs more credentials to connect to this network", I click it and then a window appears prompting for...
Username
Password
Domain pass
this is not an option suitable for the usual WPA Personal encryption, first off there is no user name, no domain, its just WPA personal, TKIP,passphrase... what can I do? like I said it connects fine if no encryption is used. and it worked fine Lo these last 2 years with a Linksys WRT54G I'm not very familiar with Vista, I'm an XP man myself (I and my wife have XP, router installed on mine)(My wife has windows XP with a Linksys adaptor and it works fine so I know it is a Vista conflict)
View 6 Replies
View Related
Mar 23, 2008
I can't print nothing from my computer, the printer said the USB is no connected. I don't known what that means.
View 4 Replies
View Related
Jun 8, 2008
I have a printer connected via USB on my desktop computer running vista Ultimate 32bit and I have a Laptop running Home Premium 32bit it sees the printer cause its there on the printer's folder but when I try to test a print page from the laptop it says its being sent to the printer but nothing prints out. I know it works cause it worked when my desktop had XP PROFESSIONAL installed which was like 3 weeks ago. My desktop prints fine. I just need the laptop to print. By the way Im sharing the printer from the desktop
View 4 Replies
View Related
Sep 16, 2009
I've got a friends laptop to repair. I've determined that at least the boot files are damaged. I've connected the hard drive to my own PC in an attempt to recover the files from the drive. Unfortunately, my PC says that access is denied when I try to browse the drive. In the disk manager I can see the drive. I've gone onto the drive and updated the permissions on all the files to allow full access for administrators and users, yet I still cannot access the drive. I know that the content of the drive is still there because I COULD see the filenames zipping on the screen while the system was updating permissions. (That shouldn't work if I don't have permission, should it?) If I boot from an installation CD and try to access the drive from a recovery console it asks for the password for that Windows installation. I enter the only password that is on the laptop, but it does not work. There is only one user on the laptop, so that SHOULD be the password.
View 4 Replies
View Related
Mar 23, 2008
I have a Canon LBP 1120 printer connected to a Windows XP PC and a Vista Laptop. I used to be able to print from both computers..... suddenly the printer started rejecting orders to print from the Vista Lapton. It sends to the Canon printer menu but it disappears after a few seconds. I've reinstalled the driver but no joy. Find it strange that it used to print from the Laptop but suddenly stopped yet still prints from the Windows PC. don't wish to pay the ??99.00 Dell wants to charge to trouble shoot the problem!
View 4 Replies
View Related
Mar 10, 2009
Windows Vista Business with SP1 I have two NICs in my Vista Business SP1 machine - one NIC is connected to our corporate network, the other NIC is connected to a private network. Both networks are using DHCP, with the private network obtaining it's address from a LinkSys WRT54G (not being used as a router - just a switch with DHCP). The problem I having is that both networks end up with a entry in the routing table for 0.0.0.0 with the same metric. So anytime I try to access the internet (which should always go through the corporate network), I have a 50-50 chance of actually succeeding.
View 4 Replies
View Related
Nov 8, 2007
I recently bought an 8800 Ultra Extreme, I had a low PSU (580W) and was advised to upgrade, so yesterday I bought a 650W Zephyr PSU + Gigabyte 3d Galaxy2 liquid cooling system. I connected everything (including the 2 power 6 pin into the card) but in my motherboard I have a PCI_E (4 pin) power to be connected to that gives extra power to the card, I have a Gigabyte M59-SLI-S5 mobo. so it stayed up for about 4 hours yesterday, (testing games, and using the pc) without connecting that 4 pin power, I noticed lower FPS, but temps were more than fine.. Until now I realized the 4 pin power for the PCI_E onboard is not connected, so I connected it. now the FPS is back to normal, temps are still very normal, but i'm worried there might be something damaged with the card? I tested a few games and its fine, but i'm just worried. cus I have my 7950 GX2 artifacted, not sure why tho. Right now temps are 66C idle 74C on load.
View 4 Replies
View Related
May 18, 2008
I recently bought a new Dell with Vista Home Premuim and have not been able to connect to any of the six (6) wifi networks I've tried. Two home networks, one at work and three public. On each occasion I have been able to detect and where appropriate, provide security keys, but although it says it's connected it will not go on the internet or do any network activity. I do have a nice cheap Palm TX which connects to all of these networks, so I'm thinking it's a Vista issue. Given I bought a laptop for the explict purpose of using wifi, this is a rather expensive rock which is pretty much useless. Seems like lots of people have the same problems, but haven't yet found any solutions. What a surprise from Microsoft, eh?
View 4 Replies
View Related
