I got an ASUS M50SV with integrated Realtek HD ALC888S audio and the problem is in the speaker configuration, it only shows stereo. i cannot change it because its grayed out. The laptop also has S/PDIF output but the Realtek HD Audio Manager doesnt recognize it.
View 9 RepliesI want to do is have my headphone to have a different audio stream than my speakers so that I can talk to a friend through my headset and receive the voice audio, but to also have through my speakers sound from other programs. Basically I just want the system to recognise the speaker and my headphone as different output devices instead of tieing them together. The software I'm using is Realtek Audio Manager and it hasn't been helpful whatsoever, I've had two computers and I've had the same problem with them both.
View 6 Replies View RelatedMy Vista crashed. I am looking for a change the mic input for stereo-rear speaker output?. Also which can perform a system restore to an earlier date.
View 4 Replies View RelatedMy Laptop (Toshiba A355D-S6930; Vista HP 64bit) using ALC272 (6.0.1.5689) Realtek soundcard and only have a mic and a headphone jack. Is there anyway to change the mic input for stereo-rear speaker output?
View 4 Replies View RelatedI just added more memory to my Dell Insperion 530. Which is very simple. But now the speaker icon in the lower right has a red X. When I put the arrow on it I get the following: "No Audio Output Device is Installed".
View 7 Replies View RelatedNo sound will come through the speaker or headphones in Vista, I checked the drivers in control panel's device manager utility. Does anybody know what could be blocking the signal?
View 7 Replies View RelatedI have on-board sound chipset by Realtek ALC888, I installed The driver from the Motherboard cd (vista drivers cd) and no sound, i tried to get the latest versions from this forum and still the same problem, I tried even plugging the cable in different ports in the back panel and still its a mute system ! Everything is fine on XP, i don't know what to do, Should i get a new sound card or new speakers
View 9 Replies View Relatedi want to output sound through my digital output and through my front jacks at the same time, i.e while watching a movie through my digital output (monitor i.e video extended to my tv) and playing a game at the same time (game on my LCD), with sound coming out my front sound jack for the game. so basically in a nut shell, i want to watch movies and play games at the same time, while the respective sound comes through different outputs.
View 4 Replies View RelatedI Was using the Sony Sound Forge 8 in a HP laptop with XP Pro and the program was working really good,but I had a problem with the HP Laptop and I have to run and bought a new computer,as a computer technician,the warehouses make me good prices in computer parts and computers,so I bought an Acer Aspire 4520 with the VISTA OS and now I dont know if it is the computer or the Vista that make the sound output real bad like when you are listening to an old cassette machine,it start slow and after a while you start listening acceptable..I don't know if it is syncronization beetween the data that is in the hard disk and the program or it's that I need a driver,I download the Realtek audio driver just in case,and installed but I still have the problem..But if I play any music in iTunes it sounds real good.
View 4 Replies View RelatedI know this is a repetitive topic, but I can not seem to figure this one out. It is a HP Laptop DV9815nr. I do not know much about it as it is not mine, but the problem is the audio was cutting out and now there is nothing. The computer is not recognizing any type of audio device installed. Even in Device Manager, there is no option for Sound, game and controllers. I have tried downloading the driver and installing, but no luck there.
View 9 Replies View RelatedI have a brand new Gateway GT5694 desktop computer, using Windows Home Premium (x64). I have a set of Altec Lansing speakers which I've plugged into it, which worked very well with my previous XP computer. There's an echo in the audio output that's so bad that speech is barely intelligible. There's also mild distortion in music. Headsets work fine when I switch to those; no echo at all. Speakers consist of a small left and small right
speaker, and a sub-woofer. They're powered speakers. The speakers' green input plug (only one) is plugged into the green, speaker output on the computer. I've tried all the other 3.5mm outputs, and none of the other outputs work at all insofar as producing sound. I've tried different settings in the Control Panel (Manage Audio Devices).
In order to use another microphone, I disabled the webcam microphone. Now the icon for the webcam mike does not appear, in the recording devices. How do I reenable the webcam microphone?
View 9 Replies View RelatedThe speaker icon has disappeared (lower right). I have no control of the volume and it is set to zero. I need volume control - machine is useless to me without it. How do I get it back and prevent it from disappearing again?
View 6 Replies View RelatedI was given a pair of Logitech Z-10 USB Speakers. I'm running Vista 64. I've never seen a USB speaker system....Not sure how they work. Will I have problems with these speakers? Will they use my sound card? Do they put a heavier load on the CPU than a sound card? I've downloaded the latest 64bit drivers, but they are dated '07, so I'm not sure if I want to try these.
View 5 Replies View RelatedMy speaker starts humming when i plug the mouse into the front panel USB port. I have 2 front panel USB. The humming more prominent with the mouse plugged to one of them. There is no humming when connected to back ports. There is no humming when a pen drive is connected to either of the front ports! I tried another mouse on the front and that causes humming too. The front panel is a single PCB with 2 USB and the headphone and mic jacks (AC97). My speakers are connected on the rear. Probably some irreparable problem on the front panel PCB, but if someone has experienced a similar problem and solved it
View 9 Replies View Relatedthere is no 2.1 speaker option in realtek hd control panel.
View 8 Replies View RelatedFor some odd reason now when I single click an item in the start menu or single click an item on the desktop my speaker produces a single beep. I had event sounds for Menu Command and Menu Pop-up (this beep wasn't assigned.) but have removed the sound just for testing. I don't even have this sound anywhere in my sounds folder.
View 4 Replies View RelatedIve recently installed vista ultimate 64 and previously in xp i could set the speaker setup to be headphones in the sound options, however in vista there is no selection and its setup as just speakers. Ive set in x-fi modes and console etc to be headphones so everything is fine then but im slightly miffed as to why its saying speakers in the control panel -> sound section in windows not the x-fi. It also shows it as a speaker icon and not headphones so i dont know if this is conflicting.
View 9 Replies View RelatedBecause of the recent fiasco with Creative / Daniel K the straw has broken the camels back and I am trying real hard to not use my X-Fi XtremeGamer, and never buy Creative again. Although I didn't personally have many issues with it (and Alchemy is great for Vista...wish there was one for everyone) I don't want to spend my life wondering what will happen next with my drivers..
I have a Gigabyte GA-P35-DS3R rev 1.0. This board has the Realtek ALC889A chip and when I first started using it in XP I was so very impressed with both the quality and the features. Specifically speaker fill. I love upmixing my music to 5.1 and at the time I was having weird issues with Creatives own expansion setting so I happily used my onboard for quite a while.
Then I decided to upgrade to Vista and noticed immediately that things were not working the way they had on XP.. DirectSound removal aside, I couldn't even get music to upmix properly.. So here I am again, trying to get by without my X-Fi and I've installed the latest drivers from Realtek's web site for Vista x64........
i just bought LOGITECH x-530 5.1 Speaker system. when i go to "Realtek HD Audio manager" and choose "5.1 speaker" the "rear pair" is grayed out! Here is a picture; if i change it to 7.1. then the "rear pair" will appear and i will be able to preform the test and hear sound... B-U-T ---> when i will play movies.. (divx, mkx, bluray.. ect'...) i don't hear the people talking.. it's like the wrong sound configuration information goes to the speakers. it will seem the people talking coms from the sub-woofer.. and again really really dim... .+ the rear speakers will work but very low (even when i put it on full volume) . any idea how to set up correctly the sound ? so even if i am on 7.1. the sound will go to the speakers as 5.1 and send the right information to each speaker?
View 5 Replies View RelatedI keep getting a yellow exclamation point on windows start navigation sound I can go in and select it and it works for the time it is selected. but as soon as I reboot the yellow exclamation point comes back how do I fix this can someone help me please it annoying and aggravating to have to turn that on all the time. I even did a system restore back to yesterday thinking I did something to it no go still dose it. nothing else broken all works good sound everything just not this one.
View 9 Replies View RelatedThis worked for me before but I messed it up. I used to be able to record the sound coming from my computer and play it to my microphone right away as it goes. Meaning when I record something, it would record whatever is playing on the computer. But I forgot how to make that setting.
View 9 Replies View RelatedI m using, Vista Home Premium 64bit with sp1 Asus P5N-E SLI motherboard which has a realtek ALC883 sound chip (a 7.1 chip but its limited to 5.1 on this board as standard) im using the Coax output on the back which is contected to my 5.1 sound system. and im using the R1.89 realtek HD audio driver codec (have tryed R1.88,R1.87a,R1.87, and the ones that came with the motherboard R1.57). i can only get 5.1 sound when i play a DVD in WMP, Media center and the realtek digital out put test works too. But when i try playing games (crysis,call of duty 4 and so on) im stuck with dolby pro logic 2.1 and i also can't seem to see the digital output on the realtek manager either no matter what version i use. also the jack info seems a little odd to me.
View 7 Replies View Relatedneeds to use a 120 dpi configuration but i really dislike it, i need more space in the screen. Need any way i can have 2 dpi configurations on the same computer one for his user account and one for mine.
View 5 Replies View RelatedSo I mananaged to get my Old HP PSC 500 to work on my HP Pavillion a6030n with VISTA gave up on the scanning part totally. Bought and installed a new I/O card to do this and tinkered for days! NOW, I realize I have NO SOUND searched all of the threads and experimented with various and sundry but to no avail. The speakers were old JBL PROs had been working changed them out for some old BOSTON speakers (also working on old Gateway) still getting the "No Audio Output Device Installed" and don't even get a "Sound and Video" portion in Device Manager!
Tried downloading Realtek AC97-Audio-Codec-driver-A397 as it was mentioned as a fix in another thread. No joy! Will installing another driver help this? I can't see why the card would be damaged as the previous install didn't go near it. I am not a total novice but small words would be helpful as my brainmatter is fried and not a lot of hair left on the head.
i have had no problems with my audio on my vista 32, until i recently put 4GB ram into my computer, switched it on and works fine, only problem was i lost my audio/realtec, i dont know why this happened, and i am unsure how to correct it and get it working again
View 8 Replies View RelatedI have Realtek high definition audio onboard with one coaxial and one optical digital out. I have the newest driver. I need to connect PC with Panasonic AV Receiver via digital connection. When I use coaxial connection, sound works fine BUT sound is too silent! I have Sony DVD player with coaxial digital output too. If I use subjective for example 1-10 "scale", build-in RDS tuner (in AV receiver) has subjective volume 10, sound from CD inserted in DVD player has the same subjective volume 10 and sound from PC connected via coaxial digi has subjective volume 5. Only volume control i have in Windows is set to max!
View 7 Replies View RelatedI have a Nvidia 7800 which i recently hooked up another monitor too(dual dvi) I now have no video from media player, quicktime, etc.. Only web based video works(which is weird because the web based video is running wmp. When i unplug monitor 2 the video works fine again, after a reboot and the like of course. Anyone know wuts going on here? Sound and everything else works fine, its just showing a black screen on the players.
View 5 Replies View RelatedI've recently upgraded the RAM on my Computer, turned the machine on and everything seemed fine, until I noticed that there was "No Output Device installed". I've noticed many topics about this subject but all seem to be occurring after installing Vista not RAM,
View 5 Replies View RelatedI have a problem (obviously). My laptop will not play sound. When I hover my cursor over the sound icon in the lower-left corner of the screen, a message pops up stating that 'No Audio Output Device is installed'. Does anyone know how to fix this?
View 5 Replies View RelatedI'm getting the following message: 'Windows encountered a problem installing the driver software for your device'...It appears that the High Definition Audio Controller is having a problem installing (The System cannot find the file specified). I have tried downloading the latest driver, but it still doesn't appear to install. Does anyone know of a way to solve this - I've tried a lot of different things, but I still get the message that there is 'No Audio Output Device is Installed'.
View 7 Replies View Related