How Backup Utility To Recognise Files?
Nov 8, 2008
I've been running Backups regularly using the Control Panel, Backup and Restore Center. I've recently noticed however that my movie files weren't being backed up. The file type is '. MOD' saved by Panasonic camcorders. The 'video' and 'additional files' boxes are checked in the settings dialog. I spotted the problem after adding loads of movies to the computer and noticing the backup didn't need a new DVD (previous one nearly full) then I checked the backup files and '.MOI' files were copied from the folders but not the '.MOD' files. Is there any way of getting the backup utility to recognise these files?
View 4 Replies
ADVERTISEMENT
May 24, 2009
This issue has popped up a couple of times on the forum, but none of the solutions seem to work for me...
I'm running Vista Ultimate on a Dell XPS1330 notebook. I used the Vista back up computer tool to make images of the system c: drive and a second data partition. These were written to a USB hard drive as H:ComputerNameBackup 2009-05-22 162639etc. I have since formatted and re-partitioned the on board hard drive and expected to be able to restore my system and data onto the new partitions. I have tried to restore from a Vista Recovery CD and from within Vista, after re-installing, but it always fails to see the backup.
I have also tried copying the back up folder onto a ntfs partition, but it still wasn't recognised.
View 9 Replies
View Related
Jun 5, 2010
In my 'program files' folder I see subfolders with names I don't recognise, do not appear under 'control panel - uninstall a program', nor on the start button 'all programs' option. Is it safe to delete them ?
View 9 Replies
View Related
Mar 23, 2008
just a bit of advice needed really. Im in the process of doing a course. It is talking baout how to run chkdsk and cisk cleanup but is only giving instructions on how to do these processes in Windows XP. What is the procedure in Vista?
View 6 Replies
View Related
Dec 13, 2009
Ever since I received my new (refurbished) laptop, I have had the message of "insufficient storage available. cannot backup files." Further, my computer has always run slower than any other computer I have used. I get the message "low disc space..running out of disc space" often. (Dell has been no help whatsoever, and at this point, I am out of warranty.)
To try to resolve my problem I have compressed the drive 'to save space' which gave me 231 mb of space. Certainly not enough to run any backups. I have defragmented and get the message that it does not have to be defragmented at this time.................
View 5 Replies
View Related
Dec 18, 2009
I had made a format for my computer and i followed all the instructions and i made backup for my files and everything (the users files ) and when i tryed to reput them on my computer it didnt open i tryed to use easy transfar and restore back up but it didnt work so if anyone can help me i will be greatfull to all
BTW the folders name on the flash disk is (MINWINPC) but their is no nmae on the files or exetentions .
View 7 Replies
View Related
Mar 18, 2009
This guide aims to show you that how to backup your iPod songs and videos on your computer for Windows and Mac users. It includes 2 parts:......
View 9 Replies
View Related
Mar 23, 2008
I started a backup on my computer but then it stopped because i didn't have enough space. I found the files and deleted them because it was slowing down my computer. After I did this, I read something that said don't delete backup files because it could potentially create problems with the backup and restore process in the future. Does anyone know how i can find out if I deleted an important file/files?
View 4 Replies
View Related
Feb 1, 2010
I recently backed up my files to the Recovery D drive (Back up and Restore center). It failed as I did not have enough memory to complete the op. I've since uninstalled programs that I do not normall use, but still only have 20MB free out of the 10GB drive. I'm trying to go into the user files to delete folders which contain pictures that I want to delete to free up room. BUt when I click on the folder and try to delete it, I get an error message indicating that I do not have enough memory to complete the operation. So how do I delete these folders (that contain a ton of pics)?
View 8 Replies
View Related
Jun 21, 2009
I deleted my pictures several days ago and did not note that it occurred. Also missing are my favorites and contacts. I am wondering if I can upload these folders from my back up disk. Rather than loading all of the disk, it would be a selective choice;
View 6 Replies
View Related
May 20, 2009
Suddenly, my computer freezed (just like it has been doing for some time now). When I restarted it, the computer asked for the Vista DVD, so that it could repair some files (I couldn't even boot into Safe Mode). I put the DVD inside the drive, and choose the "Repair your computer" option, but it reports that no Vista installation is found...
I then boot into the Rescue and Recovery environment (that is a Thinkpad suite, located in another partition of the disk) to see what's going on. The System Information detects everything except the Hard Drive (it reports "Not Available" for the fields "Hard disk free space" and "Hard disk capacity"). I also can't see the harddisk in the option to backup the files to a pen (the pen is recognized, though). Just to be sure, I run PC Doctor and my hard disk passes all tests.
View 7 Replies
View Related
Jul 29, 2009
I've been faithfully backing up my C: to another internal hard disk on a weekly basis for over a year now. I just received an error message telling me that my E: is full, so the most recent backup was unable to be completed. How do I delete old backup files - is it as simple as deleting the particular backup folder and subfolders? Also, can you recommend any strategy on which backups to delete and which ones to keep? I'm running Vista Home Premium, using Backup & Restore Center utility for the weekly backups.
View 4 Replies
View Related
May 15, 2009
I've been trying to back up my laptop since I bought it last year, but the
first time I did it, it said "backup failed" (I didn't look at why, just gave
up) and since then, every week when it does its sad little attempt to back
up, it says "last backup failed".
I finally decided to give it another crack tonight, but when I looked at the
D drive, it said that I only had 1.28GB free of just over 5GB. I looked in
the file to see if there was anything I could get rid of so I could start
from scratch, but apparently there's nothing in there apart from the little
RECOVERY file (87kb) which it says I shouldn't touch, so I'm not going to!
I am completely computer deficient and I have no idea about anything! I'd
be really grateful if someone could give me a clue (in Vista Backup for
Dummies terms) as to what's happening here and how I can FINALLY back up my
laptop, and maybe even begin to love it like I should!!
View 9 Replies
View Related
Oct 26, 2009
A PC had Vista installed and one folder was encrypted by OS. This folder had some thousand or so files. Then Vista was reinstalled, with most old system files (including "Windows", "Users" and "Documents" folders) deleted before reinstallation. Encrypted folder left intact on HDD. Is it possible to get files from encrypted folder somehow decrypted under newly installed copy of Windows? Username and password for Windows account used to encrypt folder are known. Utilities like Elsomsoft's EFS recovery could not do much - when account password have been supplied utility said that it can decrypt about 90 files in total with no hint on why specifically these files can be decrypted and not others.
View 9 Replies
View Related
Mar 6, 2009
We recently had a need to replace a hard disk. Our original files were all backed up with Windows Vista Backup. The backup process produced no errors and appeared to complete successfully. However, when we restored the backup to the new hard drive, we found that there were many missing files. To this point, it appears that the missing files are all .EXE files. In many cases, all the files were restored to a folder, except for the executable (.exe). We know that these files existed when the Windows Vista Backup was performed on the original hard disk. Moreover, we backuped the same files later using a different program and have confirmed the files were there.
Is anyone aware of a problem where Windows Vista Backup is either NOT backing up all the files or is NOT restoring all the files? Furthermore, it is odd that this seems to have affected only certain files which brings us to wonder if our security software could have blocked files somehow without our knowledge
View 9 Replies
View Related
Dec 28, 2009
I recently bought an external, portable hard-drive to use partly for backup, partly for mobility. It connects to the usb and I can copy files & folders back & forth, no problem. Some of the files contain confidential data. If the drive was lost or stolen it might be embarrasing. What are the best ways of protecting the data on an external drive?
View 5 Replies
View Related
Mar 23, 2008
Using the automated Vista files backup I am getting very large backups - 50Gb - weekly. It should only be backing up new files and files that have changed. Why is it backing up files that have not changed for years? I have seen several other posts on discussion forums but no explanation or solution. I am running Vista Ultimate 32-bit and am up-to-date on hotfixes.
View 6 Replies
View Related
Jun 8, 2008
I used the "Backup" component (Start>Accessories>System Tools>Backup Status and Configuration) of Vista Basic to backup my hard drive to an external drive in case I had a faliure on my HDD. Well, I had to restore the factory settings on my machine and now I want to restore the files I backed up. My external HDD is FAT32 and the system is telling me it can't use a target that isn't formatted NTFS. I have files that will be impossible to replace in this backup copy on my external drive but I don't know how to get to them. Does anyone have a work around for this?
View 7 Replies
View Related
May 7, 2009
Vista backup and restore is setup to automatically create a backup every Friday night at 9:00 PM to an external disk. After a month I no longer need some of the older backup files so I deleted two via windows explorer because there is no way that I've found to delete old backup files using the backup and restore center. Now when I go into the restore files (advanced) screen that list the available backup files on my external disk, I see the two backup files I deleted. The question I have is, what needs to be done so that Vista backup and restore does not list backup files that have been deleted?
View 4 Replies
View Related
May 15, 2010
I want to backup my microsoft windows Vista Home Premium 64bit updated files so i can install them back later after recovery for the same computer and OS ? updating files size= 500mb
View 4 Replies
View Related
Mar 23, 2008
ON SUNDAY MARCH 2ND I DECIDED TO REINSTALL VISTA HOME PREMIUM BECAUSE ICOULDN'T GET WINDOWS MEDIA CENTER TO WORK. AFTERWARDS, WHEN I PLUGGED INMY SEAGATE EXTERNAL HARD DRIVE AND TRIED TO USE THE BACKUP WIZARD I SAW THIS MESSAGE: -"THE DISK CONTAINING THE
BACKUP IS NOT ACCESSIBLE. PLEASE MAKE SURE IT IS TURNED ON AND CONNECTED TO THE COMPUTER." -I PANICKED AT FIRST BECAUSE I THOUGHT THIS MEANT THAT I WOULD NOT BE ABLE TO ACCESS THE FILES ON MY SEAGATE, BUT I REMEMBERED THAT I COULD GO THE LONG WAY BY GOING THROUGH WINDOWS EXPLORER AND CLICKING ON FOLDER AFTER FOLDER AFTER FOLDER, ETC. I WOULD
RATHER NOT HAVE TO DO THIS, ESPECIALLY SINCE ALL I'M LOOKING FOR IS JUST-ONE -FOLDER!
View 9 Replies
View Related
Apr 29, 2008
my c drive it says i have 1% left ! i have used disk cleanup and defag but it didn't help ,plus i remove programe ,cookies and temp internet, can i do a recovery using my backup files? i only had this computer for one year
View 5 Replies
View Related
Jul 31, 2009
I'm having issues with various programs on my 32 bit Home Premium Vista OS. It seems like a virus to me. When I try and open EXPLORER the infamous CLASS NOT REGISTERED error shows up. For many other applications I get the "WININET.dll NOT FOUND" error. I have tried REGISTRY MECHANIC and also tried to do a STARTUP REPAIR using the VISTA DVD. The Startup Repair utility does not seem to find any problems when I run it at startup.
I wanted to get opinions if all this was leading to a clean install or a repair install of Vista. I'm not sure if I have SP1 or SP2. I can't seem to get to any program that would give me that info because of aforementioned errors.Also if it is a clean install that I need to do, can I save my documents and music somehow first? Any ideas? Is it possible to use DOS Command Shell and try the COPY command to copy these folders to my portable hard drive, which is L: drive on my computer. I do have a few programs that run without the errors. One is Mozilla Firefox. I can see all my important files by typing "C:" in the Firefox browser (for eg. "//c:/Users/admin/Music"). Any way to copy them to "L:"? Or any way to back them up before OS installation?
View 4 Replies
View Related
Apr 11, 2008
I currently have a Dell Dimension 8200 computer with window XP Pro installed. For specific folders and files, I use the AKGBackup Program and it has worked well for me, especially since it is so easy to use and I can access any backed up folder or file with just windows explorer. I don't need a lot of features. In the very near future, I plan to purchase a new Dell computer with Vista Business Edition. any simple folder/file backup programs (Vista compatible) that is similar to the AKGBackup program. I should note that the AKGBackup program web site does not indicate if it works with Vista (the last time I checked). I should also note that I have researched a bit about windows Live OneCare and it appears to be somewhat lacking. Imaging, I currently use the Symantec Livestate Recovery Desktop Edition for my current computer and plan to purchase the ShadowProtect Desktop Edition for my new computer.
View 4 Replies
View Related
Feb 25, 2007
Windows Vista has loads of new backup features such as previous versions of your documents and system state points that are part of System Restore. All of these features are turned on by default and offer you a great deal of backup protection. However, you pay a big price in disk space. Every once in a while when your system is stable and you need to free up some disk space, it is a good idea to clear all of these previous versions of your files and System Restore points from your computer. This is a very easy way to free up a few gigabytes of space across all of your hard drives.
To get started, just follow these steps: ...
View 0 Replies
View Related
Feb 11, 2009
Last week I upgraded a HPxw4400X workstation from WinXP Pro w/SP3 to Vista Business. I did a full backup and also used FAST (files and settings transfer wizard). However, I soon found out that the DVD drive was "broke". HP told me it was because of the upgrade. They said to do a fresh install. Did another backup, fresh install, then a restore. Had lots of problems with BSOD, but a selective restore got it working again. But he can't see MS Office, nor navigate to it. I can see it when logged in as an admin. I thought of copying files and folders between profiles (he has 3 of 'em - , ., and ..000). The former is the oldest so I thought I could copy the App Data and User Data over it'd work (in both Documents and Settings, and Users), but it didn't work. I've been here working on various issues for 28 hours, so I'm not thinking as clearly as I'd like.
View 9 Replies
View Related
Nov 9, 2008
I have just got a Zennox DV5210 but I cannot get my laptop to recognise it because the disc that they have provided is only compatible with XP and Windows 98. Is here anyway I can get the laptop to recognise this digital camera?
View 4 Replies
View Related
Jun 30, 2008
im using vista ultimate x64
with 4gb ram,512mb vga card,celeron d.my problem is why my directX only
recognise 3326mb while the windows and bios startup showing 4096mb(4gb)
View 9 Replies
View Related
Dec 15, 2008
i'm having a problem with my new cpu. i just bought a HP M9402f. i believe the graphics card is integrated into the mother board due to the fact that there is nothing in the pci -e slot, but there is a small chip int he pci-1 slot. the chip looks way to small to be the nvidia card. anyways, i put in an ATI Radeon HD 4650 into the pci-e (16) slot and then i changed the bios to that slot for the video card. however now when i restart the cpu it does not seem to find the card at all.
View 7 Replies
View Related
Apr 13, 2009
am getting a windows security login window but it will not recognise any name and password that i enter. When i cancel i get the following error message: I Account: 'mail.applybuilder.com', Server: 'mail.applybuilder.com', Protocol: POP3, Server Response: '-ERR Authentication failed.', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC92 I have been into Tools : Account, and set and reset my email name and password countless times now but I cannot get past this problem.
View 4 Replies
View Related
May 17, 2008
Vista Ultimate 32bit isn't recognising my mouse or keyboard on boot. They both work in bios, the setup cd, and ubuntu Linux, on the same PC. This all started when I had to repartiton my drive - I moved the partition vista was on to the start, and deleted a partion i had there. When I tried to boot after doing this, it said there was no bootmanager present, so I put in the vista update disk and that fixed it. Windows booted as normal, but now, when it gets to the login screen, the keyboard and mouse do not work. They are not USB, they are enabled in BIOS, I've tried a hard reset, and I have tried in safe mode.
View 5 Replies
View Related
