When I go to a folder and do a right mouse click and go to properties it will show me the number of files I have but not the number of subfolders. How can I find out how many subfolders I have?
View 5 Replies
how to set up the folder options to display the number of subfolders or items when its selected. It used to display in the bottom of the folder window but got disabled. Any folder clicked on would display in a small footer the number of items stored in in and size.
View 9 Replies View Related"Somewhere in California - At 8:30 PDT with the release of Snoopy Linux 2.1 and Goober Linux 1.0, the number of Linux distributions finally surpassed the number of actual Linux users." "We've been expecting it for some time," Merrill Lynch technology analyst Tom Shayes said, "but this is a little sooner than most expected. We've seen explosive growth in the number of Linux distributions, in fact my nephew just put out LittleLinux Chart Tommy Linux 1.1 last week."
View 9 Replies View RelatedThis sounds like one of those Vista curses. I'm the sole new user of a home media center PC running Vista 64 bit ultimate. Privileges are of absolutely zero concern. So I try to rename a folder, call it MainFolder located in UserName | Music and which contains numerous subfolders created by Windows Media Player 11. I can rename the subfolders with no problem. But today, for the first time I tried to rename the MainFolder. I get a warning that I need permission,and to try again (which does nothing).
I right click the folder's properties and see that the read-only attribute is checked (not by me). I uncheck it and try renaming again. Same result, and on my returning to Properties, the read only box is miraculously rechecked. I click on Properties | Security and see that all are checked "Allow" except special permissions, which is blank. I click Advanced, and in the resulting Permissions tab I see the following:
Name Permission
WMP Network Service Full control
WMP Network Service Read
Username Full Control
Anyhow, All I want is For Vista to allow me or anyone using the computer to be able to use it without requiring passwords, secret handshakes, etc...
I've read several comments regarding the problem I have found about using windows vista mail, all with the same result - no useful solution. Having just moved from Outlook Express, I am accustomed to using sub folders under contacts. I set up subfolders in Vista contacts but they do not show up when I wish to forward an email using "To:" to select members of a folder, ie "family"
How inconvenient to have to search through all 300 or so addresses to find the 5 or 6 I want to forward to. "Family" is mixed in with all the rest. Creating a group is inappropriate when I do not want to send to ALL addresses in a group. Any news on a correction to this problem?
Or, is it possible to import Outlook from my XP system to use on this new one? The "work arounds" I have seen suggested are rediculous - this seems a serious flaw in the product to me! Any news of an improvement with SP2? (I have SP1 preinstalled) So far I find Vista NOT user friendly! Each problem requires hours of research to discover there is no solution...:mad:
When I emptied my junk mail. When I looked again all my sub folders were gone too- all my business emails and folders. I am desperate. What do i do?.Can I recover them? Where would they be? I am using windows security essensials as antivirus. I am using vista mail.
View 6 Replies View RelatedSay you have a folder called "Indie Music". It has 300 subfolders with music files (say X, Y, Z, etc.). I want to delete subfolder Y and then have the focus go to X or Z (the previous or the following subfolder). But after deleting Y, my focus is jumping back to "Indie Music", every single time. How am I supposed to keep track of where I was within my 300 subfolders and know which subfolder to focus on next when all I can see is the parent folder? Also, when i rename one of my 300 subfolders, the focus stays with that subfolder after the rename. If I rename "GGGG" to "ZGGG", the focus has gone to "ZGGG", right at the bottom of the tree, and again I have no idea where I was before.
Basic housekeeping with these subfolders has become impossible. I have given up on arranging and managing my music, pictures, etc. and have to transfer all my work folders to another PC where I can work and also keep some sanity. Is there a setting to keep the focus on the previous or next subfolder after deleting or renaming instead of taking it back to the parent folder? I had no choice (Vista or XP) when I bought my new laptop,and I spent hours (that I don't have!) trying to find my way around Vista.
How do I located subfolders that are now mysteriously gone.I had 20 sub folders or more with email correspondence.does anyone know how to recover them or find them?they are not in the trash bid or recycle bin?
View 4 Replies View RelatedIn my 'program files' folder I see subfolders with names I don't recognise, do not appear under 'control panel - uninstall a program', nor on the start button 'all programs' option. Is it safe to delete them ?
View 9 Replies View RelatedI have all my emails delivered to my inbox. I then (used to and would like again) move any mails I want to keep into a subfolder. What I did previously was right click "inbox", new folder, name it and there it appeared eg RC,type "vista" and a subfolder called vista would appear. If I then wanted to create a sub subfolder I would RC over Vista, type " problems" and that would then appear as a subfolder of vista...........
View 9 Replies View RelatedEach time I start Windows Mail again, ALL my (150 or so!) folders and subfolders are opened (unfolded)!!! This drives me crazy... Apparently, this does not happen when I close my folders, close Windows Mail and start it again, but only when the system is restarted (not set into sleeping state with Windows Mail staying open, but really restarted). I have even unchecked the option to automatically open the folders with unread messages, though I would like this one to work like in OE, but it did not suppress the problem. I cannot find another option to NOT develop the folders... 99% of my messages were imported from OE, if it may be a clue...
View 9 Replies View RelatedI can share a drive, no problem. No one can actually touch any of the data on that drive unless I specifically share each item one by one. Is there a way to share a drive and automatically have EVERYTHING on that drive be accessible to network users?
View 4 Replies View RelatedWhen I go to START - FAVORITES the individual sites and subfolders appear in one list alphabetically. When I go START and right click on FAVORITES to open it in a window, the folders appear first alphabetically and the individual sites next on the list. The same thing happens when I have a site open and go to FAVORITES from the menu bar. The list is sorted first by folders and then by individual sites. I would prefer to see them listed as the second and third examples show but I cannot get the first one to sort that way. Pretty picky I know, but it is Wednesday after all.
View 4 Replies View RelatedThe Start Menu is extremely long opening folders and sbfolders. The magnifying glass turns round and round. It can take over one minute; however, if closing the menu and coming back, I find the folder I tried to open already open; if I try to open one of its sufolders, the same happens again with the subfolder.
I've read the tutorial at Menu Show Delay Time, but that method doesn't solve my case.
I don't know if there is any coincidence, but when this problem appeared all programs started to stop responding from time to time, more often Firefox.
I just installed an additional 2gb of RAM on my system, but this is not showing in the Task Manager. It iniitally was not showing in either, but after installing SP1 Sys info was updated.
View 4 Replies View Relatedi have recently bought a Toshiba L500 (Australian model) and played for awhile and have realised the number 1 keys is hard to push, so when i press it down mutiple 11111111111111111111 appear and becomes stuck and when i un-jig it, it stops and pushing down is harder than the surrounding numeric numbers so it definitely indicates something is wrong. (top row of numbers) can it be fixed at a service center or go back and get a new 1, or are there other options?
View 5 Replies View RelatedI have been using my PC for a few months, and it needed to get sent in to a techie a week or so ago who swapped around some hardware trying to fix a problem. After it came back, but before I turned it on, I installed a new RAM stick. When I turn it on it needs to be activated straight away. Sure, I thought, major hardware change, I will just activate it again, like I phone activated before. But I can't activate. When I try and get it to phone activate, the screen comes up with the number to ring, and a space to type in my 'confirmation ID' given to me by the phone service. But to get my 'Confirmation ID' I need to give an 'Installation ID to the phone service, and I don't have an 'Installation ID'. I cannot activate by internet either, My PC doesn't have internet access. I put in a dial up modem, but whenever I try to set up an internet connection, I just get cryptic errors. I should add that I can't do anything on the PC in the meantime, every time I start up I just get this problem.
View 9 Replies View RelatedJust obtained new Owner Version of Ultimate (32 and 64). It says 3 different installs allowed. I wish to use it on 2 hard drives in same computer, one 64 bit, one 32 bit for testing our AutoCAD Addin Sofware. Will likely re-do the current 64 install (done by this owned package) to 32 (as 64 is on the new & larger drive, a mistake on my part), then install 64 again, but on smaller hard drive. This has me concerned as to how MS views the number of installs (limitted number), especially as within the same computer, same basic configuration.
1. Will I soon run out of my allowed installs, or will they be considered as just one as is on same machine??
2. Does MS have any problem with 2 installs active on one computer (separate hard drives)?
I noticed that my 280GB hard disk is seemingly suddenly down to 20GB. I see that my used shadow storage space is 86GB and the allocated shadow space is 88GB and the max shadow space is "unbounded." I have the commands to resize the max space, but I don't know what to resize it to. I know I have about 150GB of programs, files, etc on my c: drive. Can you advise? Is it possible to determine the actual number of restore points that are kept and then simply decrease that number? It would seem that with most problems you wouldn't necessarily want to go back more than 3 or 4 points, would you? I just don't know how the shadow size corresponds to the number of restore points that are kept. 80+ GB just seems completely unreasonable! Incidentally, I also have a recovery drive, presumably created by the computer mfgr (Dell) with 15GB total, and 5GB free.
View 9 Replies View RelatedPurchased: New Systemax Computer from TigerDirect.com, Has Windows Vista Home Premium SP1 64bit installed. The installed O.S. has a O.E.M. volume license number. The unit came with a Windows O.S. Cd with it's own product key. Can I change the volume license number to the individual computer product key without reinstalling the operating system.? If this is possible how do I proceed? Does the different product key automatically activate?
View 9 Replies View Relatedwhen I try to send emails I get the following error - The connection to the server has failed. Subject 'test', Account: 'mail.comcast.net', Server: 'mail.comcast.net', Protocol: SMTP, Port: 587, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E
View 7 Replies View RelatedI keep getting this: Account: 'mail.insightbb.com', Server: 'mail.insightbb.com', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800CCC19
View 6 Replies View RelatedThe message could not be sent. The authentication setting might not be correct for your outgoing e-mail [SMTP] server. For help solving this problem, go to Help, search for "Troubleshoot Windows Mail", and read the "I'm having problems sending e-mail" section. If you need help determining the proper server settings, please contact your e-mail service provider.
The rejected e-mail address was 'sue_collins@btopenworld.com'. Subject 'btopenworld only', Account: 'mail.btinternet.com', Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '530 authentication required - Your email could not be sent. To fix this you must make a simple change to your email (known as SMTP authentication). For advice visit www.btyahoo.com/smtp', Port: 25, Secure(SSL): No, Server Error: 530, Error Number: 0x800CCC78
To read the whole article go to
BIOS settings demystified | Hardware 2.0 | ZDNet.com
BIOS setting demystified
I find that when it comes to people building their own PCs (or tweaking their existing rig) then the mysteries that lay within the BIOS settings are scarier to most people than anything hardware related. Let’s do something about that!
I can see why the myriad of BIOS settings instill part excitement and part fear in many people. After all, it’s almost impossible to connect two bits of hardware together in the wrong way, and hard to break anything unless you are being particularly clumsy or using hulk-like strength to force incompatible parts together. But when it comes to the BIOS settings, it seems like there are an infinite number of settings that can be fiddled with, and each of the individual settings seems to have dozens of possible values.........
I am trying to number file names sequentially. It works, but not how I would like. I am trying to number file names as: Filename (10), Filename (11), Filename (12). What I get is: Filename (10), Filename (2), Filename (3)... How do I do what I want?
View 4 Replies View RelatedI have this problem with Vista64. After every updates from M$ I get this error: The file /windows/system32/hall.dll is broken and the error number 0xc00000e9. If I am a standard user I would have no chance to recover it. Sometimes it helps to put the install dvd in the drive and wait what happens. But sometimes I must recover this file directly from DVD with another computer and copy it to my system. Finally after approx. 2 hours of playing my system alives, but with the fear what the future brings. Has anybody same problem? If yes how do you solve it?
View 4 Replies View RelatedI came into the office this morning to find my computer (Toshiba Portege, M700) in a state that seemed to be hung up in the midst of a windows update reboot. So I waited for a while, and nothing happened. The last normal reboot seems to have taken place sometime prior to about 3am Central time Sunday morning, when a Windows update was done (so it seems from Event Viewer). After that time, there are a large number of DCOM errors - things like WSearch failing to start, etc. A half hour later, tired of waiting, I decided to hard reset. Once I did that, the machine has yet to come up to a running state outside of safe mode. Among the things (I didn't catalog each and every reboot, etc.) tried were reboots into normal mode with just about every non-essential piece of software disabled, uninstallation of Sophos antivirus and Adobe Acrobat Pro and other biggies, etc. Never did I get a "normal mode" reboot to work. I've also restored the system to several set points prior to the weekend, to no avail. I will post some event viewer text when I have the chance tomorrow, but I'm totally dead in the water. I'm posting this note just in case this happened to anyone else this weekend or at their last Windows Update.
View 9 Replies View RelatedI updated my computer and could no longer receive my e-mail. "Error number 0x800CCC0E". I uninstalled the update and even restored to before I updated and nothing works. Don't know what to try next.
View 9 Replies View RelatedI have been using Windows Mail on my Vista Home Premium machine for a while now. The was an update loaded on my machine by winows update within the last couple days and ever since my Windows Mail no longer accesses by POP3 Email account. I receive the following error message: An unknown error has occurred. Account: , Server: , Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x80004005
View 9 Replies View RelatedI've been using Windows email for a month with no problem, until today when i can not receive any email. It says receiving 1 of 12 messages, but then I get the following error message: Account: 'Windows Mail', Server: 'incoming.verizon.net', Protocol: POP3, Port: 110, Secure(SSL): No, Error Number: 0x800CCC19
View 9 Replies View RelatedI'm currently having loads of problems with windows mail. I was having the password problem that has appeared on the community many times, tried the fixes posted but none worked (I stopped short of starting all over again). The password problem has stopped, but I am now getting the error message.
Account: 'pop3.blueyonder.co.uk', Server: 'pop3.blueyonder.co.uk', Protocol: POP3, Server Response: '.', Port: 110, Secure(SSL): No, Error Number: 0x800CCC18.
