My desktop and original laptop are XP, and my new laptop has Vista. I can't get the Vista computer to print. It shows the printer on the network (an HP deskjet950C), but when I print, nothing happens.
View 4 RepliesI have done this often on XP to XP. Now I want to do it on a two machine setup using VISTA on one machine and XP on the other.
I have a EPSON R320 printer installed and working fine on the XP machine. It was connected to that machine's USB.
I moved the USB connector to the VISTA machine and installed the printer drivers etc on that machine. It printed fine.
On both machines printer sharing is activated, using share name R320.
I moved the USB connection back to the XP machine, I can't figure out how to 'add printer' on the VISTA machine to enable printing on the R320 from the VISTA machine to the R320 via the XP machine.
One of the computers in my office keeps rebooting to the safe mode option when trying to print. The print job is coming from Quickbooks, but I don't think that is the root of the issue. The printer is a b&w Brother HL-2070N laser printer and has been set up on the same computer for over a year. The desktop computer is running Vista Home Basic. The problem just started and I don't know where to start. I haven't found anything online that relates to my issue yet
View 5 Replies View RelatedHow can you print the directory using vista
View 9 Replies View Relatedi have problem with HP Deskjet 450 under Vista Home Premium. Printer is installed by Vista, everything looks ok, but i can't print. When i want to print Test page, only row of 2-20 smilies is coming out in best case and print job shows error . When i ask HP, they say Microsoft is responsible for drivers. Microsoft says i should ask HP. I slowly begin to be annoyed. Have bought short certified hi-speed USB 2.0 cable. Windows update shows that there is optional update for Other hardware - dj450 USB, dowloaded and it says it is not possible to install, error code: 80070103. Under Win XP are no problems. Is there any solution aside from buying new printer or downgrade to XP?Is there a way to install this update
View 9 Replies View RelatedTwo shared printers off 2 computers running XP. One notebook running Vista that can print fine to one shared printer but not the other. The one it *can* print to is hardwired to the network, the one in *cannot* isn't. But, that's not the problem. The notebook "sees" the printer share just fine. Just trying to connect or run the setup wizard ultimately leads to an "access denied" error. 1) I tried googling the answer and it wasn't "add a local printer" (even though it's not) 2) I tried installing the printer driver both before and after adding the printer (didn't work) I mean it's *right* there, the machine sees it. Why can't it connect to it? Do I need to change something in the machine's permission settings? It's an effing printer. Who cares if the whole world sees it.
View 7 Replies View RelatedI have a problem with my laser printer, Epson EPL5700. EPL5700 is a monochrome laser printer, with a LPT1 port. Linked to a computer, who running with XP Familly edition, she work fine, and XP recognizes it automatiquely. But when I have linked my printer on my other computer who running on Windows Vista SP1 32bit, I can install the printer, I select the port who is LPT1, after, I choose the "EPL 5700" on the drivers list, and I finish the configuration. I try to print a test page and the status of the printer change: before print of test page, it was "Ready"... and after, It change to "Error" and the page isn't printed. That the same thing when I try to print another document.
View 6 Replies View RelatedI have an Epson stylus photo R200 printer. It prints phots and CDs. The photo function works fine with Vista, but when I try to print a CD, the image is WAY off-center. Are there any Vista patches or downloads that will correct this problem?
View 9 Replies View RelatedIs it operating correctly that I can't print a draft document in Vista Email?
View 9 Replies View RelatedI connected a HP Deskjet 670C to a laptop (Vista), using a USB to Parallel Converter. I downloaded the driver (Windows XP - Vista doesn't exist) for the printer and installed the driver that came with the cable. I can't print.
View 4 Replies View RelatedIn my 64-bit installation, the print spooler server suddenly stopped running (and will not restart). I've tried cleaning out registry keys (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrint), deleting the files out of Windows (C:WindowsSystem32spool) to no avail. The system log contains many of these:Error Service Control Manager Eventlog Provider7034None The application log contains these:WarningSpoolerSpoolss1035NoneThe print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.ErrorSpoolerSpoolss1027None The system failed to initialize the local print provider: Error 0. This can occur because of system instability or a lack of system resources.
View 4 Replies View RelatedI am running Windows Vista Home premium 64bit with 8gb ram and an hp c309a printer. My problem is that vista take a long time to print even just a 1 word paper using notepad. Also when i right click the printer in the printer folder it also take time to open the properties, aprox 3 minutes. So if i try to print it takes 3 minutes just to open the tab to click print and to select the printer i wish to use. The c309a is connected by usb cable, and i have tried re-installing the latest drivers and firmware for the printer as well as different usb cables and each of my usb ports. Yet for some reason there is a long 3+ minute pause when trying to print. I have also tried using the network feature and I still have same trouble. Also i have checked to make sure print spooling is on in services. HP has a utility to check for issues for both network and for usb, and the printer passes each test fine. I have done so many full uninstalls and installing of the software as well as the cable changes it is driving me nuts. I have been google'ing for days and days and have had no luck in fixing this issue. One last comment every time i try to print the applications I am using freeze for the 3+ minutes and the window application shows "application not responding", but after 3+ minutes i can finally select the printer and hit print, then at that point it freezes again for about 2 minutes and then prints. I have run multiple virus scans and multiple spyware detection programs and have also run online virus scans using bitdefend and trendmicro as well and i have no virus or spyware. I have also ran "hijackThis" and been told my system appears clean.
View 9 Replies View Relatedrunning vista 64 SP1 RTM cannot print from IE nor print preview unless I turn UAC off in control panel. Cannot print even if opening IE as admin. (some sort of error message about C:/users/username/appdata/local/temp/low/ and some files therein.) Note, on a different machine with vista 32 SP1 beta2 refresh (never got around to installing SP1 RTM on this box) - UAC enabled and no print problem at all
View 5 Replies View RelatedWe have recently got new hardware and upgraded to Vista. We have also just changed to fully networked printing. We are having some printing funnies, but mainly when printing from Excel - no idea why. Here is a selection of the printing problems we have had:
File-Print: Print dialog does not appear
File-Print/Print: Does not print, no printing message
File-Print/Print: Looks like it prints to printer (see printing message), but nothing prints out...........................................................................
I'm running Vista Ultimate on my present computer, have full installation dvd. I'm buying a new Dell computer that comes with Vista Basic installed. Can I move Vista Basic from the Dell computer to my old computer and install my Ultimate on the Dell?
View 9 Replies View RelatedRight now I have a single 640 gig HDD that everything's on. I've got a laptop too that I'm gonna be taking out on rotations eventually. I wanted to get a new smaller (250GB) HDD and put my Vista on that, so my 640 will be data only (then I could take it with me in an external enclosure and leave the desktop for my mom to use til I come back and collect it). I was gonna DBAN the 640, but I wanted to get the data off of it first- about 170 GB of stuff that I'd rather not lose.
My question is-
Can I install Vista on the smaller drive, boot with that, and access files on the other drive? Would it work if there's another Vista running on the other drive? (both SATA).
Program path: C:Windowssystem32spoolDRIVERSW32X863HPWSPRE0.exe This problem happens because of partial incompatibility with Windows Vista. Please contact the program or device manufacturer(s) for more information. UNQUOTE Job stays in the print queue despite deleting it, and I cannot print
View 4 Replies View RelatedI started using Vista recently, after I bought a laptop with Vista preinstalled. When prompted, I made a Vista recovery disc. So, hopefully, I am protected, if the operating system gets corrupted on my hard drive. Next, I wanted to also back up the rest of my hard drive (data, programs, file structure, etc.) so that if my hard drive got corrupted, I can reinstall Vista using the recovery disc, then reinstall the rest of my data and program files using my hard drive backup copy. To make a hard drive backup copy, I purchased a standalone hard drive with a USB plug. The portable drive is about 50GB bigger than my laptop's hard drive. I then used Vista's Control Panel/System and Maintenance/Backup Your Computer.
This method of backing up my hard drive took ages (several hours) which surprised me, as the entire contents of my hard drive only amounts to 96.5 GB. I later foud out why: Vista had, wile in the process of backing up my hard drive, compressed everything into a lot of roughly-equal-sized zip files. What I am aiming for is a way to reinstall my entire hard drive contents, Vista and all, in a simple, quick way, so that my laptop will be the same as it was before the file corruption occurred.
To achieve this, can I not simply drag-and-drop my laptop's C: drive into the standalone drive? I think that avoiding file compression would also lessen the possibility of data degradation or corruption during the process. I've known image files, in particular, suffer badly from the compression and subsequent decompression. Then, when I want to retore my hard drive, I can simply drag-and-drop the contents of the standalobe drive into "computer" in Vista's file manager, yes?
I bought a computer with Vista that had no modem. I installed my old modem - vista didn't like that - BSOD on shutdown. Uninstalled that, bought new modem listed as Vista compatible, is in Device Manager as Agere Systems PCI SV92PP soft modem. It is listed as operating correctly. Today I downloaded from Windows Update an optional update which was a later driver, from 10/07. In Fax Settings, the modem shows as connected, but when I try to create an account, when I choose Receive Automatically or Notify Me, I get a box that says "To send a fax, you must first connect to a fax modem or server. To see how to set up your computer to send and receive faxes, see Help and Support". The only way I can create an account is to say I'll choose later. In that case, I can neither send nor receive faxes automatically, although I was able to receive faxes manually.
View 9 Replies View RelatedI have Vista, and some of my older (XP Based) programs cannot run. I heard that XP can be installed on Windows Vista. Question is...can both Windows XP and Vista run on same computer? i.e. Click to run XP...Click to run Vista.
View 9 Replies View RelatedAs implied by the title, my old computer died and I need to replace it. I am curious as to wheter or not it is possible to use my same Vista product key on my new computer, or if I have to buy an entirely new version.
View 9 Replies View RelatedThere seems to be no way to make my Sony Vaio with Vista print to my HP LaserJet 1300
View 9 Replies View RelatedI have a Acer aspire Laptop with Windows vista 64 bit It worked fine until the other day i started it and it wouldn't boot windows at all. The only disk that I got with my computer was the Windows vista anytime upgrade CD. It has let me install windows vista once before when my computer crashed. Now when I try to re-install Windows vista everything works fine until I get to the part where it asks me to select the drive on where to install it to.I can't find any where it is suppose to list them.Also what used to be my C: drive is now Drive X: I have tried to boot from dos,Treid to do the repair,Nothing seems to work. When I start my computer now the only thing I get is; Media test failure,Check cable Exiting PXE ROM Can anyone give me some ideas on what to try or do?
View 5 Replies View RelatedWhen I try to boot Vista (Home Premium 32bit), the loading screen with the green bar doohicky shows up followed by a black screen with the mouse cursor. It oscillates between "working" and regular cursor but in the end, the computer just restarts and it does that again if I try to boot it. This probably happened because I system restored right before getting this problem, but I'm not absolutely sure. I also got this error message just once or twice in the many times I tried to boot:..........................
View 5 Replies View RelatedCan Microsoft delete files on my computer through VISTA without my consent? If so, what files can be deleted? Can files be accessed by them the same way? Again, if so, does anyone have a link to website documenting this?
View 7 Replies View RelatedJust got a new HP Pavilion d6500t with installed Vista Ultimate x64. Has been tough going, but was scraping by until today. I installed Quickbooks (via download) and transferred my data files from my old pc to the new pc. Things seemed fine. then BAM!
The screen became "jumpy" and I received a number of error messages. Could not bring up Task Manager, so I had to shut down the pc manually (turned it off). Reboot involved a system check because of the manual shut-down. System check was fine...but, now my pc is frozen on a black screen with the hp logo in the middle. My choices are the usual: Press <ESC> to enable startup message, <F1> to enter System information...etc. I cannot go ANYWHERE from here. The F-keys are not responding AND I cannot even manually shut off the pc! I am a total novice when it comes to pc systems.
I had to reinstall Vista due to malware that I could not get off my computer. I could not do a repair, and now Vista is new on my system. The problem is that I now cannot activate it, and I get a notice that says that I need to enter a new number. I do not think that I need to, but I don't know how to reactivate. I called Microsoft, but the person (honestly) hung up on me.
View 5 Replies View RelatedMy new computer (Vista) is wired to a wireless router. While the router sees all other connections to the network, Vista doesn't recognize ANY computer (1 on XP, 1 a MacBook and 1 a wireless game system). How do I get Vista to recognize the other computers on the network? Previous XP computer saw and allowed sharing without issue, so not a hardware problem I'm thinking, as the new computer/Vista is the only change to the system.
View 4 Replies View RelatedWe have 3 W2k computers and a new vista computer. The Vista computer cannot access the shares on ONE of the Windows 2000 computers. The network is peer to peer and with the exception of the Vista computer accessing this particular Win 2000 computer, everyone can access everything. (we are trying to share a printer on the Win 2000 computer, but the computer rejects the user name/password from vista computer). I have triple checked the permissions and when you try to access the share, you get a user name/password error. You can access the same share from one of the other win 2000 computers using the same user info and it works fine. All Win 2000 machines are SP3, we had some issues on one computer with SP4 and never installed it on any of our computers. Is there an update or a setting on the Win 2000 computer that would only effect the vista computer accessing the 2000 shares?
View 4 Replies View RelatedI have put a new hard drive in my case, just for a bit of extra storage. It is set to a slave drive but when it is plugged in and i start my computer vista wont boot. I am stumped with this one.
View 3 Replies View RelatedHas anyone ever tried installing AOL software on a computer running 64-bit Vista?
View 9 Replies View Related