I use a laptop w/ vista business in my work truck. As i have traveled around for the last 7 months with it on its stand in the front seat it has connected to over 800 wireless networks. How do I remove these wireless networks QUICKLY (1 at time is going to take hours!:mad How do I prevent VISTA from automatically connecting to any networks without asking me 1st?
View 4 Repliesi can't find any wireless networks. I didn't have the problem before, my computer can still connect to two wireless networks that I used in the past. Now I needed to connect to a new one. As I said I can't find any wireless networks not even those networks I can connect to.
View 5 Replies View RelatedWhen I try to connect to my wireless broadband on my laptop, its showing my network with full signal, but when I click connect, it's telling me I can't? I know my wireless is working because I'm on my desktop PC right now which uses the same connection. Anybody know where it's all gone wrong? I only know the basics when it comes to computers so sorry if this is all a bit vague...
View 8 Replies View RelatedJust got a new Dell Desktop with wireless card pre-installed. I have an existing wireless router that all three of my other machines (XP) can see and connect to just fine. No matter what I seem to do, the Vista machine tells me there are no networks available. I've tried re-booting, re-freshing the Network list, waiting and re-freshing, turning off various automatic features, etc. Nothing seems to work and I need to connect to the Internet to update the PC with the numerous security patches Vista needs when first
starting up.
i've connected on multiple wireless and corded networks before, but traveling and suddenly i can't connect anywhere, i've tried two corded networks and one wireless, ít always says connected, but 'access local only''can't copy ipconfig as on different machine in intenet cafe currently. but ipv6 shows wierd address (with letters) and ipv4 looks like a good address.. it shows media state for media disconnected.. but i know it's not the router as it is three different places...uninstalled my avg software virus and software, was going to do windows update, but since can't get on internet can't do that.
View 6 Replies View RelatedIt works fine except when I have tried to install my Belkin USB wireless adapter. I went to Belkins site and it told me to download the Ralink drivers, which I did. Nothing. Vista tells me that the device is working properly, but the light on the adapter is not lighting up, and Windows does not pick up any networks at all. I tried the PC with a second, identical adapter to see if it was the device causing the problem, but I have gotten the same response, which lead me to think it was an issue with Vista.
View 9 Replies View Relatedi've set my laptop to auto-connect to a wireless network, but it'll ask for identification because it's a secure network. is it possible to automate the filling process too, so that i don't have to type everytime? i have to enter my username, password and another field which i can't rem. >.< there is a check box on the prompt pop up screen which says that the above information can be saved when checked, but it's greyed out, so i couldn't check it.
View 8 Replies View RelatedI went on a trip ad at the hotel my laptop would not detect their wireless network. The hotel had me connect some sort of adapter to my usb port and also had their tech support change some networking settings on my computer. Now when I go to work and plug-in the usb cable to my computer nothing happens (used to connect to the internet).
View 5 Replies View RelatedI Have An HP Dv5t Pavilion With An Intel Pentium Dual CPU T3200 @ 2.00GHz, My Wireless Internal Network Card Is A "Broadcom 802.11b/g WLAN".I Have Been Using This Laptop For 2 Months With No Problems At All. And Just On Thursday My Norton 60 Trial Ran Out, So Of Course I Deleted It From My Control Panel. And After That, Is When I Started Getting This Problem. I Have Looked Around The Web And Tried A Dozen Different Solutions That Do Not Work For Me. And It Has Been Pissing Me Off So Much To the Point Where I'm About To Format The Hard Drive. I Do Not Wish To Take Such Drastic Measures.
View 7 Replies View RelatedI'm running Vista Ultimate x64 on an HP Pavilion dv6676us laptop with built-in Wi-Fi. My network is running on a 2Wire 2700HG-D router/modem. Last night, when I rebooted after a Windows update, I had no network. If I open the Network window, it says, "This computer is not connected to a network. Click to connect...". When I click there, then choose "Connect to a network", a window pops up saying, "Windows cannot find any networks". If I click on "View network computers and devices", it just takes me back to the Network window.
In Control Panel, Network and Sharing Center says, "The page failed to load". Windows Help tells me to make sure my network adapter is enabled in Control Panel --> Network Connections. In Network Connections, I see nothing that refers to a network adapter; I assume this is what displays as Wireless Network Connection, which says "Not connected". The context menu gives me choices of Disable and Connect/Disconnect. Selecting Connect/Disconnect doesn't help. Disabling, Enabling, and Connecting tells me again, "Windows cannot find any networks"..........
I have Vista running in dual boot mode on a C2D 2.0ghz laptop (2 gigs ram). I usually run in XP as it seems to be much faster. Are there tweaks I can do to make Vista run with the same amount of get up & go?
View 9 Replies View RelatedHow can one change the password expiration time to a longer duration?
View 4 Replies View Relatedhave a Sony Vaio VGCLT16E, sometimes when i am typing fast (and using the delete and backspace keys because i am not a very good typist) my key board stops responding and the keyboard LCD window flashes on and off...could this mean i have hit a key combination that affects the keyboard during my sloppy typing, and if so, what beside re-booting can i do next time...yes, i will try to slow down.
View 4 Replies View RelatedI figured out why some of my files weren't turning up in search, it was because they weren't indexed. These were mostly some of my .mp3s I've downloaded from the internet or ripped from a CD. So I'm wondering, why are some of my .mp3s automatically indexed the way they're suppose to be and some aren't? Also, is there an easier way to find out which files aren't indexed rather than having to check it in properties for each file? That takes a long time...
View 2 Replies View RelatedI have my favorites in alpha order but like to drag a couple to the top of the list but I can only drag it to the top of what appears to be a full page of Favorites, then I have to use the up arrow to move the top item to the bottom of the page and then again and again, I drag the Favorite to be moved, page after page. I have to keep an eye on it to locate it again for the next drag for the length of one page only. Can it be dragged to the top of the list immediately?
View 5 Replies View RelatedWe need to run one of our large 16bit Visual Basic 3.0 applications on Vista Ultimate (32bit) while we rewrite the app in VB .Net. So far I have been able to install the VB3 app, and even the VB3 dev, on Vista and with a few small changes all runs well except for printing from the VB app. We use the VB PrintForm command to print a screen image from the app. All works well under Windows XP but under Vista nothing prints. Watching the Print Queue for the default printer, a job starts then quickly disappears from the queue with nothing printed.
The VB3 app can see the printer and the printer properties OK using Printer Setup (Common Dialog VBX). Printing works fine from Word 2003 and other 32 bit apps on the PC. I have tried several printers, all work OK under Vista except for the 16 bit apps. I have tried running the app as Admin and changing compatibilty properties. Does Vista support any printing from 16 bit apps?
I have a question. The information tag that pops up when you mouse over an item in windows quickly disappears when you first directly mouse over the file or folder and will reappear for as long as you want it to if you point near the bottom of the selected item. Is this a normal thing or a bug in Vista? Has anyone else ever noticed this? Sorry for the explanation, I don't know of any other way to put it. Is there a Tutorial for this?
View 4 Replies View RelatedIn my native language German, substantives begin with capital letters which are to type often. When typewriting quickly often happens that also the letter following the uppercase letter is also an uppercase letter.
instead of Austria AUstria
I watch this for many years, and long time before I analyzed this to see, whether my release of the cap key is delayed. It was not, sure, but I don't fret about. Now, with Gigahertz CPU and Vista, perhaps there is a way to adjust this behavior.
ive been having problems with the tilde key on my Asus laptop. at first it was that it didint work at all, in games, in microsoft works, or notepad. i went searching online and disabled the driver for the eHome ir receiver (even though i dont own an ir receivers). after that i was able to use the tild key only outside of games. but heres the strange part, if i press the tild key quickly as if i were typing normaly, it dose not register. in order to use it i have to hold down the tilde key for about 1-2 seconds before it would spit out a stream of "````````````". then i could delete up to the first one. this is true for the laptops keyboard, and a wired dell keyboard i connected using usb.........
View 9 Replies View RelatedThis is not causing any problems, I just don't know why. I have an i7 on a Gigabyte GA-EX58-UD5, gigabit Linksys switch, Norton 2008 firewall, Vista 32bit, and 3 PCs (Vista, Vista, XP) in a LAN. Vista doesn't seem to think a LAN/switch is a real network? I can see all of the other network PCs, connect to the internet (DSL) thru a switch connected Linksys wireless router, share files, and printers; but it's bugging me.
View 7 Replies View RelatedI'm wondering if it's possible to set up my computer (it has two ethernet connectors) to connect to 2 different networks at the same time? (this would be both "wired" networks, but if wireless is easier I have wireless USB adapters I can utilize as both of my network routers are wired & wireless).
View 9 Replies View RelatedI have yet another problem with my lame vista laptop and this time, it's the net yet again! I can't seem to find any wireless networks nor can I find mine. I've tried to do some of the things people suggested with previous posts like mine but, I it doesn't seem to work. Wireless Network Connection is disabled, I try to enable it and it doesn't work p.s. I can access the internet when I connect the DSL modem directly to my laptop.
View 9 Replies View RelatedI've encountered an issue with my networking where my 1Gbps LAN has it's speed capped at 54Mbps. I'm using a laptop with a 1Gbps NIC and 54Mbps WIFI adapter. The WIFI is connected to an wireless access point (network 1). The 1Gbps NIC is connected to another network. Both networks are private. The networks are not connected. While transferring between my laptop and a Windows XP box that is only on the 1Gbps network I've noticed the speed stays at a constant 54Mbps during the entire transfer. I'm wondering why the speed of an 1Gbps network is being capped at 54Mbps.
View 6 Replies View Relatedeverything is working wirelessly. 1 desktop is wireless and working fine, my iphone is connected and working fine, the Nintendo Wii is working fine, i just brought my laptop over from my house and no network is showing up, and i know that last time i brought it it connected fine and other networks around us also showed up. How can i reset the network adapter. completely back to factory settings, i know my cousin messed with it to get better. download speeds and ever since then it has been giving me issues.
View 4 Replies View RelatedI am having a problem with the finding wireless networks, The problem started that sometimes I was not able to view wireless networks even though the wireless is turned on and sometimes I am not able to see certain networks, however I was able to view the networks sometimes on restarting or at a later time. The problem is that now while I am connected to a wireless network, sometimes it just disconnects and "Connect to a network " views that it can't find any wireless networks (even though my colleague next to me can see them and is still connected) and if i try to troubleshoot it tells me that my wireless device is switched off even though it is still on and if i actually switch it off it is not recognized to be switched off (the color indicator for off and on doesn't change ) The only way that I can connect again is to restart (and sometimes I have to do it more than once before I can see wireless networks again) I am not sure if it is a Vista problem or a hardware problem ...I have a HP Pavilion dv6000
View 4 Replies View RelatedI have two PCI wireless network cards from two different brands, Netgear WG311V2 and D-Link DWl-G520+. My Vista Ultimate 32-bit SP2 system has 4GB of RAM. Neither will detect wireless networks when the system RAM is greater than 2GB. If I pull out one 2GB stick, it works fine. Put it back in, failure to see networks. I tried the Netgear on a Windows 2003 Standard 32 bit SP2 with 4GB of RAM and it worked ok.
View 9 Replies View RelatedWe must all realize that Microsoft has it's own direction. We are pretty much not in control of our own computers, nor will we be ever. The issues I have seen, and what you all are seeing is the results of many things. All of which I will not be able to address.
1st You really need to have only Vista machines.. cures all problems..
2nd You really need to have a Server to perform DNS and DHCP, even all of us home users. Gee I wonder why there is now even a Home version of Server.
3rd We really all need to be MSCE's if we are going to have more than one computer on the network.
4th We need artificial inteligence to figure out what the wizards are doing.
If all else fails refer back to 1,2,3,4
This option is missing when I right-click on the network icon is the system tray (notification area). I have noticed it is not there on all 3 of my PCs? Does anyone have any idea what would 'remove' this option or how to 'restore' it...?!
View 5 Replies View Relatedproblem with their wifi after logging back in from being away for a while? It won't connect or even detect any networks. If I restart the laptop it will connect properly. Is there anyway for it to work
without restarting?
When using a public Wi-Fi hotspot or any public network the security and privacy of your data is at risk. Most wireless hotspots do not use any type of encryption which means all your traffic is sent in plain text through the air. Anyone with wireless sniffing tools, which are easily to use and find online, can capture all traffic broadcast between your computer and the access point (AP). Any Web sites you visit and anything submitted on a form such as you e-mail address or contact information that is not protected with HTTPS/SSL can easily be harvested.Â
The same is true for most public wired networks that you plug your computer into. While it is not as easy, a network administrator can view all traffic that is not protected with HTTPS/SSL and identify exactly what you are doing on the Internet....
I have a small network of 3 pcs: pc1 (xp) -> lan (cable) -> pc2 (vista) -> wlan -> pc3 (vista) -> internet. I got stuck at pc1->pc2. It's really easy to setup in xp: my networkplace -> setup a home or small office network:
On pc1 choose "This Computer Connects To The Internet Through Another Computer On My Network Or Through A Residential Gateway "
on pc2 choose "This Computer Connects Directly To The Internet ", then choose the wireless card which connect pc2 and pc3.
I just installed vista yesterday, and it drives me crazy. I can't find "setup a home or small office network." I also tried "Allow other network users to connect through this computer's Internet connection" on pc2, but vista combined all the networks, and stop sharing internet between pc2 and pc3.