When I try to connect to my wireless broadband on my laptop, its showing my network with full signal, but when I click connect, it's telling me I can't? I know my wireless is working because I'm on my desktop PC right now which uses the same connection. Anybody know where it's all gone wrong? I only know the basics when it comes to computers so sorry if this is all a bit vague...
View 8 RepliesThis is not causing any problems, I just don't know why. I have an i7 on a Gigabyte GA-EX58-UD5, gigabit Linksys switch, Norton 2008 firewall, Vista 32bit, and 3 PCs (Vista, Vista, XP) in a LAN. Vista doesn't seem to think a LAN/switch is a real network? I can see all of the other network PCs, connect to the internet (DSL) thru a switch connected Linksys wireless router, share files, and printers; but it's bugging me.
View 7 Replies View Relatedi can't find any wireless networks. I didn't have the problem before, my computer can still connect to two wireless networks that I used in the past. Now I needed to connect to a new one. As I said I can't find any wireless networks not even those networks I can connect to.
View 5 Replies View RelatedJust got a new Dell Desktop with wireless card pre-installed. I have an existing wireless router that all three of my other machines (XP) can see and connect to just fine. No matter what I seem to do, the Vista machine tells me there are no networks available. I've tried re-booting, re-freshing the Network list, waiting and re-freshing, turning off various automatic features, etc. Nothing seems to work and I need to connect to the Internet to update the PC with the numerous security patches Vista needs when first
starting up.
I use a laptop w/ vista business in my work truck. As i have traveled around for the last 7 months with it on its stand in the front seat it has connected to over 800 wireless networks. How do I remove these wireless networks QUICKLY (1 at time is going to take hours!:mad How do I prevent VISTA from automatically connecting to any networks without asking me 1st?
View 4 Replies View Relatedi've connected on multiple wireless and corded networks before, but traveling and suddenly i can't connect anywhere, i've tried two corded networks and one wireless, ít always says connected, but 'access local only''can't copy ipconfig as on different machine in intenet cafe currently. but ipv6 shows wierd address (with letters) and ipv4 looks like a good address.. it shows media state for media disconnected.. but i know it's not the router as it is three different places...uninstalled my avg software virus and software, was going to do windows update, but since can't get on internet can't do that.
View 6 Replies View RelatedI have a wired router connected to a combination wired/wireless switch (both are LinkSys and pretty old). The PC in question has a wired connection to the switch. In the Network and Sharing Center, Vista sees two Networks: Network (private) and Unidentified Network (public), but both have the same IP information. Both also say local and internet access, but I cannot connect to the Internet. Disabling one of the active connections (one of the fixes suggested by Windows) causes all network connections to be disabled. I have tried resetting the router and switch, renewing the DHCP lease and resetting the network adapter to no avail. The most frustrating aspect of this problem is that it is intermittent. Sometimes, without apparent reason, the computer will "just work." There is another Vista PC also with a wired connection to the switch that has no trouble connecting to the internet and correctly sees only one network.
View 9 Replies View RelatedIt works fine except when I have tried to install my Belkin USB wireless adapter. I went to Belkins site and it told me to download the Ralink drivers, which I did. Nothing. Vista tells me that the device is working properly, but the light on the adapter is not lighting up, and Windows does not pick up any networks at all. I tried the PC with a second, identical adapter to see if it was the device causing the problem, but I have gotten the same response, which lead me to think it was an issue with Vista.
View 9 Replies View Relatedi've set my laptop to auto-connect to a wireless network, but it'll ask for identification because it's a secure network. is it possible to automate the filling process too, so that i don't have to type everytime? i have to enter my username, password and another field which i can't rem. >.< there is a check box on the prompt pop up screen which says that the above information can be saved when checked, but it's greyed out, so i couldn't check it.
View 8 Replies View RelatedI went on a trip ad at the hotel my laptop would not detect their wireless network. The hotel had me connect some sort of adapter to my usb port and also had their tech support change some networking settings on my computer. Now when I go to work and plug-in the usb cable to my computer nothing happens (used to connect to the internet).
View 5 Replies View RelatedI went home for the Christmas break and I am trying to get my laptop to connect to the network back at my house. I set up a wireless network through the main computer and have found nothing but problems. The main computer is running XP and I am running Vista. Now, the problem is my computer will detect there is a wireless network available but it will not connect. It let me enter in a password to connect but it tells me there isn't enough strength to connect. This makes no sense due to the fact that it will display 90% network strength.
View 8 Replies View RelatedI'm re-posting this because it is only visible online at the MS website, not on NewsReaders so.... (I'll try again)...I just installed a D-Link DIR-625 router, before, we had a Linksys router with no issues whatsoever. (This is in secure WPA mode, there is no problem in "unsecure" mode) My sons PC has Vista installed. He has a D-Link wireless usb adaptor. Before, with the Linksys router, hookup was as would be expected, find the SSID, click, a prompt for passphrase, sweet. Now what happens is this... I right click the network icon in the taskbar and select "Connect to a network" a list of available networks shows.( as usual) I click our SSID and a different message appears than before, instead of getting the usual prompt for a simple passphrase, I get a "Windows needs more credentials to connect to this network", I click it and then a window appears prompting for...
Username
Password
Domain pass
this is not an option suitable for the usual WPA Personal encryption, first off there is no user name, no domain, its just WPA personal, TKIP,passphrase... what can I do? like I said it connects fine if no encryption is used. and it worked fine Lo these last 2 years with a Linksys WRT54G I'm not very familiar with Vista, I'm an XP man myself (I and my wife have XP, router installed on mine)(My wife has windows XP with a Linksys adaptor and it works fine so I know it is a Vista conflict)
I have this new Gateway all-in-One machine that has built-in wireless and the standard Ethernet connection capabilities. I have an Ethernet cable connected and would like to know:
- How exactly, do I tell how I am connected to the internet (Via Ethernet or via wireless)? I click the connection icon and does not specify exactly how I am connected to the internet, Only that I am connected...
I've got a problem with my wireless network, I've got a dlink adsl2+ router 604gt or something (not at home ATM) it was working fine last night not a problem at all, had dinner then went back to the Internet and it wouldn't work page could not be displayed etc, logged into modem all is good it's got internet acces and working fine. So I left it for the night and this morning I tried again and windows can't seem to get an ip address from the router it comes up with the 169.254 etc etc takes agesbto identify the network and then finally displays limited connectivity. Tried manual settings to no avail, tried restarting both computers and still doesn't work, I just don't know what could have changed in the 45min that I was away from it. modem still registers inter access and looks to be I'm full working order just the computers have a coniption when trying to be friends with it.
View 4 Replies View RelatedI Have An HP Dv5t Pavilion With An Intel Pentium Dual CPU T3200 @ 2.00GHz, My Wireless Internal Network Card Is A "Broadcom 802.11b/g WLAN".I Have Been Using This Laptop For 2 Months With No Problems At All. And Just On Thursday My Norton 60 Trial Ran Out, So Of Course I Deleted It From My Control Panel. And After That, Is When I Started Getting This Problem. I Have Looked Around The Web And Tried A Dozen Different Solutions That Do Not Work For Me. And It Has Been Pissing Me Off So Much To the Point Where I'm About To Format The Hard Drive. I Do Not Wish To Take Such Drastic Measures.
View 7 Replies View RelatedI just setup a wireless USB adapter on my sister's PC. It worked fine, until she rebooted. Now she can't get on the internet. The wireless signal is excellent at 100%, but browsers aren't connecting. I looked in Network Connections, and there's 4 networks. 1394 Connections 1-3. Connections 1 & 2 are doing nothing, but 3 is the one showing the wireless connection (and it looks to be working fine). The fourth network is Local Area Connection, which is doing nothing. What can I do to fix this?
View 6 Replies View RelatedI have a wireless computer...notebook and I have windows vista on it. I had comcast plugged into it and now that I am mobile again, I am not able to use the wireless. The computer keeps telling me I am connected; but, I can't get access to the internet. Can anyone please tell me what to do?
View 5 Replies View Relatedi am trying to make a wireless connection from my sony vaio laptop, running vista business, to a printer (canon pixma ip4300) connected via usb to the print server of my wireless router (siemens gigaset SE551). i installed the printer as a 'local' printer on a tcp/ip address, as per the router manual - admittedly, the manual instructions were for winxp.
the problem: the printer comes up in vista as 'offline', cannot be changed to online, and won't print. documents appear in the print queue but do not print out - only sometimes when i restart the computer, the printer prints out a page or two of whatever the last failed job was. the same wireless setup with my old sony xp pro laptop works perfectly, and the printer works when connected to the vista laptop directly via usb cable, so the problem must be vista... i've turned off win defender and win firewall to no avail.
should i install the printer as a network printer? i have tried this but windows couldn't see the printer - it could see the router, but not the printer connected to it. but i've never setup a networked printer before so maybe there is something simple i'm missing.
I'm running Vista Ultimate x64 on an HP Pavilion dv6676us laptop with built-in Wi-Fi. My network is running on a 2Wire 2700HG-D router/modem. Last night, when I rebooted after a Windows update, I had no network. If I open the Network window, it says, "This computer is not connected to a network. Click to connect...". When I click there, then choose "Connect to a network", a window pops up saying, "Windows cannot find any networks". If I click on "View network computers and devices", it just takes me back to the Network window.
In Control Panel, Network and Sharing Center says, "The page failed to load". Windows Help tells me to make sure my network adapter is enabled in Control Panel --> Network Connections. In Network Connections, I see nothing that refers to a network adapter; I assume this is what displays as Wireless Network Connection, which says "Not connected". The context menu gives me choices of Disable and Connect/Disconnect. Selecting Connect/Disconnect doesn't help. Disabling, Enabling, and Connecting tells me again, "Windows cannot find any networks"..........
it's possible and economical to have wireless broadband without having a fixed land line connected because i'm sick of paying the line rental on a phone that i just about never use. I sometimes think we pay through the nose for communication that's not really up to speed in Australia.
View 5 Replies View Relatedi have a netgear wireless router, one desktop pc connected to it with a Ethernet cable (still working fine) and a hp laptop running vista connected thought wireless everything was working fine until one day the wireless on the laptop just stopped working and gave the message connected with limited access i have disconnected from the network and tried to reconnect however all i get is connection unsuccessful then i go to diagnose the problem and have been given some suggestions by windows help i have checked my driver and they are all up to date i have also checked that both ipv4 and ipv6 protocols are ticked in the config for wireless networking, my adapter says working fine and i have checked that my WEP keys are still the same.
View 5 Replies View RelatedRunning Vista64 on HP pavillion. Wireless connects great after gigaset se567 is rebooted. But if I logoff or reboot my computer, I can no longer connect until I reboot the router again. Happens if wireless is lost as well. Is an autoconnection to a non-broadcast SSID. if I manually disconnect and wait a min I can manually reconnect. Have done an ipcongif /all at one point and it showed all proper IP's etc, but I could not connect to any websites. Local access only.
View 5 Replies View RelatedI'm wondering if it's possible to set up my computer (it has two ethernet connectors) to connect to 2 different networks at the same time? (this would be both "wired" networks, but if wireless is easier I have wireless USB adapters I can utilize as both of my network routers are wired & wireless).
View 9 Replies View RelatedI have yet another problem with my lame vista laptop and this time, it's the net yet again! I can't seem to find any wireless networks nor can I find mine. I've tried to do some of the things people suggested with previous posts like mine but, I it doesn't seem to work. Wireless Network Connection is disabled, I try to enable it and it doesn't work p.s. I can access the internet when I connect the DSL modem directly to my laptop.
View 9 Replies View RelatedI've encountered an issue with my networking where my 1Gbps LAN has it's speed capped at 54Mbps. I'm using a laptop with a 1Gbps NIC and 54Mbps WIFI adapter. The WIFI is connected to an wireless access point (network 1). The 1Gbps NIC is connected to another network. Both networks are private. The networks are not connected. While transferring between my laptop and a Windows XP box that is only on the 1Gbps network I've noticed the speed stays at a constant 54Mbps during the entire transfer. I'm wondering why the speed of an 1Gbps network is being capped at 54Mbps.
View 6 Replies View Relatedeverything is working wirelessly. 1 desktop is wireless and working fine, my iphone is connected and working fine, the Nintendo Wii is working fine, i just brought my laptop over from my house and no network is showing up, and i know that last time i brought it it connected fine and other networks around us also showed up. How can i reset the network adapter. completely back to factory settings, i know my cousin messed with it to get better. download speeds and ever since then it has been giving me issues.
View 4 Replies View RelatedI am having a problem with the finding wireless networks, The problem started that sometimes I was not able to view wireless networks even though the wireless is turned on and sometimes I am not able to see certain networks, however I was able to view the networks sometimes on restarting or at a later time. The problem is that now while I am connected to a wireless network, sometimes it just disconnects and "Connect to a network " views that it can't find any wireless networks (even though my colleague next to me can see them and is still connected) and if i try to troubleshoot it tells me that my wireless device is switched off even though it is still on and if i actually switch it off it is not recognized to be switched off (the color indicator for off and on doesn't change ) The only way that I can connect again is to restart (and sometimes I have to do it more than once before I can see wireless networks again) I am not sure if it is a Vista problem or a hardware problem ...I have a HP Pavilion dv6000
View 4 Replies View RelatedI have two PCI wireless network cards from two different brands, Netgear WG311V2 and D-Link DWl-G520+. My Vista Ultimate 32-bit SP2 system has 4GB of RAM. Neither will detect wireless networks when the system RAM is greater than 2GB. If I pull out one 2GB stick, it works fine. Put it back in, failure to see networks. I tried the Netgear on a Windows 2003 Standard 32 bit SP2 with 4GB of RAM and it worked ok.
View 9 Replies View RelatedWe must all realize that Microsoft has it's own direction. We are pretty much not in control of our own computers, nor will we be ever. The issues I have seen, and what you all are seeing is the results of many things. All of which I will not be able to address.
1st You really need to have only Vista machines.. cures all problems..
2nd You really need to have a Server to perform DNS and DHCP, even all of us home users. Gee I wonder why there is now even a Home version of Server.
3rd We really all need to be MSCE's if we are going to have more than one computer on the network.
4th We need artificial inteligence to figure out what the wizards are doing.
If all else fails refer back to 1,2,3,4
This option is missing when I right-click on the network icon is the system tray (notification area). I have noticed it is not there on all 3 of my PCs? Does anyone have any idea what would 'remove' this option or how to 'restore' it...?!
View 5 Replies View Relatedproblem with their wifi after logging back in from being away for a while? It won't connect or even detect any networks. If I restart the laptop it will connect properly. Is there anyway for it to work
without restarting?