Wireless Network Can't Connected
Mar 4, 2009
I've got a problem with my wireless network, I've got a dlink adsl2+ router 604gt or something (not at home ATM) it was working fine last night not a problem at all, had dinner then went back to the Internet and it wouldn't work page could not be displayed etc, logged into modem all is good it's got internet acces and working fine. So I left it for the night and this morning I tried again and windows can't seem to get an ip address from the router it comes up with the 169.254 etc etc takes agesbto identify the network and then finally displays limited connectivity. Tried manual settings to no avail, tried restarting both computers and still doesn't work, I just don't know what could have changed in the 45min that I was away from it. modem still registers inter access and looks to be I'm full working order just the computers have a coniption when trying to be friends with it.
View 4 Replies
ADVERTISEMENT
Mar 30, 2008
I'm using Vista Home Premium and Windows Update tells me I'm up to date.
Every so often the Network icon in the System Tray tells me that it is not connected to a Network (by displaying a red X) though I can clearly see that I am.
View 9 Replies
View Related
May 15, 2010
Just returned from holiday and while we were away I changed my laptop network in vista from private to public as advised and the internet worked fine. Now at home I can’t connect to my router, and I get a message saying that the details held on the computer is not the same as the router. Also there is no “customise” function being shown on the network and sharing centre screen to switch back to private network. I’ve tried everything to set up a connection, even a new one, but the same message appears all the time.
View 7 Replies
View Related
Dec 24, 2007
I went home for the Christmas break and I am trying to get my laptop to connect to the network back at my house. I set up a wireless network through the main computer and have found nothing but problems. The main computer is running XP and I am running Vista. Now, the problem is my computer will detect there is a wireless network available but it will not connect. It let me enter in a password to connect but it tells me there isn't enough strength to connect. This makes no sense due to the fact that it will display 90% network strength.
View 8 Replies
View Related
Apr 14, 2009
I'm re-posting this because it is only visible online at the MS website, not on NewsReaders so.... (I'll try again)...I just installed a D-Link DIR-625 router, before, we had a Linksys router with no issues whatsoever. (This is in secure WPA mode, there is no problem in "unsecure" mode) My sons PC has Vista installed. He has a D-Link wireless usb adaptor. Before, with the Linksys router, hookup was as would be expected, find the SSID, click, a prompt for passphrase, sweet. Now what happens is this... I right click the network icon in the taskbar and select "Connect to a network" a list of available networks shows.( as usual) I click our SSID and a different message appears than before, instead of getting the usual prompt for a simple passphrase, I get a "Windows needs more credentials to connect to this network", I click it and then a window appears prompting for...
Username
Password
Domain pass
this is not an option suitable for the usual WPA Personal encryption, first off there is no user name, no domain, its just WPA personal, TKIP,passphrase... what can I do? like I said it connects fine if no encryption is used. and it worked fine Lo these last 2 years with a Linksys WRT54G I'm not very familiar with Vista, I'm an XP man myself (I and my wife have XP, router installed on mine)(My wife has windows XP with a Linksys adaptor and it works fine so I know it is a Vista conflict)
View 6 Replies
View Related
Oct 13, 2009
I have this new Gateway all-in-One machine that has built-in wireless and the standard Ethernet connection capabilities. I have an Ethernet cable connected and would like to know:
- How exactly, do I tell how I am connected to the internet (Via Ethernet or via wireless)? I click the connection icon and does not specify exactly how I am connected to the internet, Only that I am connected...
View 9 Replies
View Related
May 15, 2010
When I try to connect to my wireless broadband on my laptop, its showing my network with full signal, but when I click connect, it's telling me I can't? I know my wireless is working because I'm on my desktop PC right now which uses the same connection. Anybody know where it's all gone wrong? I only know the basics when it comes to computers so sorry if this is all a bit vague...
View 8 Replies
View Related
Dec 1, 2009
I just setup a wireless USB adapter on my sister's PC. It worked fine, until she rebooted. Now she can't get on the internet. The wireless signal is excellent at 100%, but browsers aren't connecting. I looked in Network Connections, and there's 4 networks. 1394 Connections 1-3. Connections 1 & 2 are doing nothing, but 3 is the one showing the wireless connection (and it looks to be working fine). The fourth network is Local Area Connection, which is doing nothing. What can I do to fix this?
View 6 Replies
View Related
Mar 23, 2008
I have a wireless computer...notebook and I have windows vista on it. I had comcast plugged into it and now that I am mobile again, I am not able to use the wireless. The computer keeps telling me I am connected; but, I can't get access to the internet. Can anyone please tell me what to do?
View 5 Replies
View Related
Mar 23, 2008
i am trying to make a wireless connection from my sony vaio laptop, running vista business, to a printer (canon pixma ip4300) connected via usb to the print server of my wireless router (siemens gigaset SE551). i installed the printer as a 'local' printer on a tcp/ip address, as per the router manual - admittedly, the manual instructions were for winxp.
the problem: the printer comes up in vista as 'offline', cannot be changed to online, and won't print. documents appear in the print queue but do not print out - only sometimes when i restart the computer, the printer prints out a page or two of whatever the last failed job was. the same wireless setup with my old sony xp pro laptop works perfectly, and the printer works when connected to the vista laptop directly via usb cable, so the problem must be vista... i've turned off win defender and win firewall to no avail.
should i install the printer as a network printer? i have tried this but windows couldn't see the printer - it could see the router, but not the printer connected to it. but i've never setup a networked printer before so maybe there is something simple i'm missing.
View 8 Replies
View Related
Mar 23, 2008
it's possible and economical to have wireless broadband without having a fixed land line connected because i'm sick of paying the line rental on a phone that i just about never use. I sometimes think we pay through the nose for communication that's not really up to speed in Australia.
View 5 Replies
View Related
Mar 23, 2008
i have a netgear wireless router, one desktop pc connected to it with a Ethernet cable (still working fine) and a hp laptop running vista connected thought wireless everything was working fine until one day the wireless on the laptop just stopped working and gave the message connected with limited access i have disconnected from the network and tried to reconnect however all i get is connection unsuccessful then i go to diagnose the problem and have been given some suggestions by windows help i have checked my driver and they are all up to date i have also checked that both ipv4 and ipv6 protocols are ticked in the config for wireless networking, my adapter says working fine and i have checked that my WEP keys are still the same.
View 5 Replies
View Related
Jun 15, 2009
Running Vista64 on HP pavillion. Wireless connects great after gigaset se567 is rebooted. But if I logoff or reboot my computer, I can no longer connect until I reboot the router again. Happens if wireless is lost as well. Is an autoconnection to a non-broadcast SSID. if I manually disconnect and wait a min I can manually reconnect. Have done an ipcongif /all at one point and it showed all proper IP's etc, but I could not connect to any websites. Local access only.
View 5 Replies
View Related
Mar 23, 2008
a friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies
View Related
Oct 1, 2009
Since i built my computer I have been having fight with other family members over the internet as our router broke and we have to plug right into the modem (only one can connect at a time). Today i purchased a 8 port 10-100mbps network switch (Buying a router is not possible at this time) I connected the modem to the switch, then my computer and then the home computer. When i connected on my computer, everything was fine (I have vista ultimate x64 sp2.)
I then disconnected and connected the home computer (xp Pro sp3) Everything worked fine. Then I came back to mine and tried to connect and after a bit of waiting i got the message "Error 815" and that the server is not responding. When I do the opposite and connect my computer and then try connect the xp computer, I get the message "Error 676 the line is busy." I can browse both the computers files through network as long as I have the other computers password.Does anyone know a solution to my problem so that both computers can be online at the same time e.g. a shared internet connection from vista pc to xp pc or connect to the internet through the other computer and vice versa? P.S Both computers have kaspersky internet security but i tried disabling them and it still didnt work
View 5 Replies
View Related
Mar 10, 2009
Windows Vista Business with SP1 I have two NICs in my Vista Business SP1 machine - one NIC is connected to our corporate network, the other NIC is connected to a private network. Both networks are using DHCP, with the private network obtaining it's address from a LinkSys WRT54G (not being used as a router - just a switch with DHCP). The problem I having is that both networks end up with a entry in the routing table for 0.0.0.0 with the same metric. So anytime I try to access the internet (which should always go through the corporate network), I have a 50-50 chance of actually succeeding.
View 4 Replies
View Related
Mar 23, 2008
I just got my HP Pavilion dv2068ca yesterday. I tried to connect through to internet. It was able to connects to my network, but not able to connect to the
internet. It also says my network is "Unidentified Network" It gave me options to diagnose and repair.
My laptop connect through 802.11 b/g WLAN
My wireless router is a D-LINK 802,11g 2.4GH
View 9 Replies
View Related
Apr 22, 2008
I'm having problems with my home network. I find that I will be on the internet wirelessly with no problems, then all of a sudden I lose internet connection, but I still remain connected to the home network. I have tried disconnecting and re-connecting to the network, this usually doesn't help. Occasionally that will help, but then a couple minutes later, I have the same problem. I have tried running the diagnosis within the Network and Sharing Center. Sometimes it will tell me that it doesn't detect a problem and sometimes it will detect a problem. Then I try to reset the wireless adapter "Wireless Network Connection" and it will appear to have fixed it, and when I try to re-load the page it times out and then I lose internet connection again. The only thing that I have found that fixes the problem is to recycle power to the modem. (Pain in the ass!)
The modem is connected to a desktop computer (I don't remember what it's running, but I know it's a version of XP) and there are multiple laptops within the house that connect to it wirelessly and I'm the only one running Vista and the only one having problems. The modem isn't very old, so I'm not thinking that it's the modem, so because I'm the only one having problems, I'm assuming it's a Vista thing.
View 9 Replies
View Related
Jun 16, 2008
I have a fairly new dell laptop inspiron 1720 with wireless internet connection. A couple of days ago I noticed the little network icon on the bottom right of the task bar had a strange little blue blob on it. If I hold the mouse over it, it says 'you are currently not connected to any networks'. If I right click and then click 'connect to a network', that box shows that I am indeed connected and to the proper network. When I first start my laptop the small network icon says that I am connected to the proper network but 'local access only', and after a few seconds that goes away and I get the above message.
I tried going into the 'connect to a network' box and disconnecting the proper network, then reconnecting but that did nothing. I am able to access the internet, my email and everything else. I did nothing new to my laptop, no programs or anything. This is just anannoying little bug that I would like to fix if anyone knows how.
View 9 Replies
View Related
Mar 6, 2010
So I am actually posting on this forum for my g/f. She has a Dell Inspiron 1521 running Vista Home Premium x32 on a 64 AMD Athlon processor with 2gb of memory. The issue that we have been encountering is simply this. Her internet just decided it didn't want to work anymore. She was checking her e-mail when the web page said that the internet connection was no longer available. We are currently at school so I told her to take it to "Computing Services" but they said that there was nothing they could do on their end because the computer was connecting to the server just fine. When I look at it I was confused myself. According to windows the internet connection is at an excellent signal strength and the networking map goes all the way green to the glob. So the internet should work. I look over the other forums to see if anyone else had this issue and tried their fixes as well. (i.e. turned off TCP/IPv6 and even got rid of AVG and turned off the firewall) nothing seems to be working. Also to top it off plugging it in hardwire doesn't work either. So does anyone have any suggestions or is it safe to assume that her network card is dead?
View 9 Replies
View Related
Apr 5, 2008
I'm having some issues with file sharing in a network with 2 Windows XP pc's and 1 Vista 32bit. One of the XP pcs has a McAfee firewall and the other XP and Vista have standard Windows Firewall. Since I updated to SP1, I am no longer able to access files on the XP pc's or vice versa (accessing Vista files on XP pcs). Vista can detect both computers but when connecting to them. Same thing on the XP pcs.. "The Network path was not found" when trying to access \VISTAPUBLIC.
Tried to reset firewall settings on Vista (read that somewhere) but it didn't help. The weird thing also is that. when Vista is connected to the network, the XP pcs can no longer see each other anymore. When I check the workgroup nothing shows up except the machine itself. When Vista is disconnected, the other XP machine shows up again. Both XP pc's have the LLTD installed (although that doesnt really matter in this case). There aint that much information, I'm desperately trying to get files transferred to my Vista laptop. I could use bluetooth but when the filesize is over 5 gb. well you get the point.
View 5 Replies
View Related
Aug 3, 2009
My laptop is connected to a NetGear router, and has been for over a year with no problems. I went on vacation and used another network for a week and when I came back I can no longer connect to the internet with my home network. I am connected to the network, but it says 'Local Only'. If I disconnect and reconnect again, it will tell me I have an internet connection, but as soon as I try to access a web page with my browser, it drops the connection. I CAN connect via ethernet cable with no problems, and no other computers on the network are having any issues. I've tried resetting the network adapter, uninstalled my antivirus, tried disabling my firewall, updated my wireless network adapter driver.
View 4 Replies
View Related
Sep 18, 2008
umm well for about 6 months now i've had my laptop (with vista premium 32 bit) and i was connected wirelessly to my home network with no problems. Then all of a sudden a few days ago (13th or 14th to be precise) at midnight i no longer had any internet connectivity. I was browsing the internet, watching a video, from a little before midnight till 12:30 and when i was done i noticed the loss of internet connection.
When i try to troubleshoot the problem i get the "cannot communicate with primary DNS server". I CAN access my home network (sent a file to our desktop computer's shared folder and recieved it just fine) but my internet connection is down. When i check in Network and Sharing Center i see the line from my PC to the home network in green but the one from home to internet is Xed. On the other hand, my brother (who also has vista on his laptop) did not get this problem and any other periferal accessing the router (wii, xbox360, DS) can all access the internet.............
View 9 Replies
View Related
Jun 8, 2009
Vista has been working great for about 6 months, networking and everything, but just 2 days ago my internet connection dropped and never came back. I looked into it and I am now connected to an "Unidentified Network" with "Local Only" access. I have tried to fix it for 3 days now and have gotten no where. I've tried everything I've read, though I may have missed something, I have even reinstalled Vista 64x.
View 8 Replies
View Related
Jan 1, 2010
I am using vista ultimate, I noticed that under properties in my computer/remote,the box is checked for remote access?,as I am not connected to any networks,is this neccessary?,can I un tick the box?,or do I just leave it?
View 4 Replies
View Related
Mar 23, 2008
my firefox & IE have suddenly stopped working (blank page; "website found; waiting for reply" on IE and "waiting for xxxxx.com" on firefox). literally. one minute they were working, the next minute they weren't. i didn't do anything special in between. not even a reboot. now, it's only IE and firefox; messenger still works and so does skype and some other internet apps. i can even ping yahoo.com from cmd.
- i've tried rebooting, no help.
- I've tried reinstalling firefox, no help.
- i've tried switching from wired connection to wireless; no help
- i've tried disabling firewall; no help.
- i've run anti-virus (nod32) and anti-malware; no help
- It's not the router or ISP, because my laptop works fine.................
View 5 Replies
View Related
Dec 11, 2009
I have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies
View Related
Nov 27, 2008
I have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 Replies
View Related
Apr 11, 2009
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS. I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. All critical windows updates have been installed.
View 9 Replies
View Related
Mar 23, 2008
I have a wireless router on a cable modem and works OK with XP but I can't see the network using my new machine with Vista. I can see my neighbours networks and I can connect to the unsecured ones but my own network does not apear on the available networks list on the Vista machine.
View 5 Replies
View Related
Nov 5, 2009
I have a set of 10 wireless laptops (no 1 - 10) and i would like them to be able to share files on any one of the laptops What's the best way to set that up?
View 6 Replies
View Related
