I have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 RepliesEVERYTHING is plugged in, the internet on my computer is working fine. However my laptop says "local and internet connection" but only displays the 5 bars now if I go into network configuration. It says everything is connected, yet ALSO says the LAN cable is unplugged, which it isn't. I originally thought this might be a problem with the laptop itself but my dad brought his home from work and it doesn't work either... I've done pretty much everything you can think of doing to fix this problem but nothing is working
View 6 Replies View RelatedI've bridged my wireless and ethernet connections to connect my xbox360 to the internet. This worked fine before on this laptop but now it don't! I've enabled compatibility mode via netsh but I still get "network cable unplugged" on MAC Bridge Miniport immediately after I create the bridge. The wireless network works just fine when I remove the bridge. I have the latest drivers and SP.
View 8 Replies View Relatedi run a toshiba satellite L300D and i had to restore the system before the restore all was ok .. but now i have the message "Network cable unplugged"..the little screen on the statup bar has a cross in it and no matter what i do it just gives me the same message .. it sees my bt home hub and says i am connected i have tried to connect by lan cable ,but that did no good the connectivity doctor says the wirless is disconnected.and says the possible cause is "ip address not set properly ( c-19 )".i have used the network diagnostics to repair the "ip address" but to no avail.i think i have tried everthing to fix this
View 7 Replies View Relatedi have windows vista ultimate x64 since i first got my computer, never formatted it afterwards and its the same install since first. I have a problem that started some time a go (i think it started in md autumn last year) after installing NIS 2010 (i suppose this is when it really started). And if you ask me, no, it's not original. Or it may have started after an update...this is the problem cuz i can't pinpoint accurately when it first appeared. So here's the problem: my windows loads normally i type in the password to my account, and then i get the "X" icon on the Networks (it appears like this, the X doesnt appear after "it loads") i have to wait like 30 seconds and i'm not kidding, when my computer normally fully loads vista in 12 seconds or so (with all the startup progrms). AND HERE COMES THE S@#T biscuit: almost anything windows-related operations don't work until that stupid icon turns to normal (without the X)... like User Account control (UAC appears after the icon turns to normal, eventually), On-screen keyboard i found out that it doesn't appear until that stupid X disappears (i had probs with my keyboard).
There's another curious thing: if i wait a few seconds at the log in screen and then decide to log in, everything loads normally (as if that stupid X has a fixed timer when it disappears). Internet works fine, no network problems... except one minor, windows-related problem: i can't click the damn icon or right click it doesn't do jack !@@# as if the icon is frozen... if i hover my mouse over it nothing appears (the list of connected networks would normally appear if you hover the mouse pointer). I have Hamachi and Tunngle installed (they are both progrms which create virtual networks,i removed tunngle a few weeks ago though), but i had them before this problem first appeared and worked fine. Another thing i need to mention is i started to get some retarded "device is not working" like 4 of them under network adapters something called Windows 6to4 Adapter #4, #5 #6, but i solved it (unninstalled them, then reinstall ONE of it).
I have 2 computers,1printer, xbox360,and ps2. Comp1 running vista and comp2 running winxp sp3. I also have a 5 port ethernet hub. Last week I switched from DSL to Cable 20mb. With the dsl router all I had to do to allow both machines on line at same time was to just hook them up to the hub. No modifications needed. My problem is that the new cable modem (motorola) will only allow One machine on at a time. To switch machines I must reset the modem and re asign ip each time I switch machines. My ultimate goal in the end is to have all 4 machines be able to access the internet and each other. Can I accomplish this with the 5 port HUB, or do I need to buy a router. (wireless is out of the question).
I recently purchased a HP C4180 All-in-One printer for use on my Vista home Premium 32-bits laptop. But I don't succeed in installing the printer. Everytime that I have to plug in the USB-cable, Vista recognizes the printer model, but doesn't find the drivers. I've already concacted the HP customer center, and many people tried to help me, but without succes. At last, I tried to install the printer on our XP-computer, and this worked very well, without problems.
I have to say that these drivers were installed with the XP-installation disk of HP. The other cd that came with my printer was a vista-drivers cd. At last, one of the people who helped me, said it could be a problem with the USB-cable. The length was alright (1.80 meters), and it worked on XP, but they said that Vista is more sensitive for different cables... I use this cable for my Maxtor hard drive too, on this laptop, without any problem caused by Vista.
a friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies View Relatedok so this problem has been going on for awhile now but has gotten worse somehow... before i could not access my vista computer upstairs from my xp computer downstairs. i've made sure the settings are what they should be on the vista computer since i can easily access my xp computer from the vista computer. now the problem has gotten worse by that i can't access my xp computer from the vista computer or vice versa so now i can't transfer files from each computer. i need to use my external drive or a flash drive.
View 9 Replies View RelatedI have a wireless router on a cable modem and works OK with XP but I can't see the network using my new machine with Vista. I can see my neighbours networks and I can connect to the unsecured ones but my own network does not apear on the available networks list on the Vista machine.
View 5 Replies View RelatedI have a set of 10 wireless laptops (no 1 - 10) and i would like them to be able to share files on any one of the laptops What's the best way to set that up?
View 6 Replies View RelatedI have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies View RelatedI have 2 laptops and a ipod touch which are all wireless conected to my main computer which runs with windows 7.
The problem I have is that one of my laptops today decided not to connect anymore!!
This laptop runs on windows Vista Basic and was working fine this morning but as of this afternoon cannot connect to internet or email.
I have tried to re-connect but I keep on receivibg the error page stating that " windows cannot find any networks "
When I click on the link below this message which is " diagnose why windows cant find any networks" a window named windows network diagnostics appears stating " this computer does not have a wireless network adapter installed and configured "
Does anyone have any solutions to this problem as it was working fine ( wireless ) this morning and now not?
I connect my laptop (Thinkpad X60S on Vista Business) to a WRT54G linksys wireless router and let's say my SSID is HOME.
My problem is this: When I try to connect Vista sees 3 and sometimes 4 networks of the same SSID, e.g. HOME, HOME (2), HOME (3) and HOME (4). It is the same network. Why is this happening and how do I solve it?
l've just recently bought a new laptop with Vista installed on it. I've since been trying to connect it to my wireless network, however it seems that Vista cannot find the network. I have another laptop running on Xp and its fine the network is visible on Xp.
I'm currently using the ADSL2+ Modem with wireless-G router and I've already tried updating the firmware. I have also connected the Vista laptop via LAN to install the Windows Updates and still it cannot detect the wireless .
when my laptop goes to sleep, the network connection is lost, is there any way i can stop i from doing this so that i still have access to my home network when it is in sleep mode.
View 9 Replies View RelatedI am trying to connect a Dell Inspiron 1501 laptop, running Vista Business, to a wireless network set up on a desktop running XP(sp2). I have previously connected the lappie to similar networks without problem. However... The network shows up as 'available'. When I click on 'connect', it says it can't, because it is not automatically configured to do so. So I manually set up a profile for the connection under the list of sutomatic connections.
It then said it couldn't connect because the security settings were wrong. Now, if you hover the mouse over the network in 'available connections', it says the security type is WEP-PSK. This is not an option under the security types listed under connection properties. I've tried using all the WEP options available, with no success. The thing always says that the security details are wrong. Incidentally, as an experiment, I tried disabling all the security on the network and then connecting. It said it had connected, but with 'limited connectivity', and wouldn't let me access the network. Don't know if that problem is connected...
I have a desktop running XP with a Canon MP160 hardwired to it. I also have a laptop running Vista. When I first hooked up my router to the desktop computer with XP, verything was working fine. I could share files back and forth between the two computers and I could print over the wireless network. But for some reason now I can't print. I can't even find the printer through the add printer thing.
View 6 Replies View RelatedI have a siemens Amilo laptop with a built in wireless card. It can see the network and asks for the network key but doesn't connect. It just times out. Although it finds all the networks available in the area they all display without any green bars in the speed bars. It seems to have no wireless power. The green bars are all grey instead of green even when the laptop is stood next to the router. I have another laptop that connects without any problems. I have removed the drivers from device manager and reinstalled them from the
drivers folder. This made no difference.
let me pick everyone's brain here. Can you guys tell me what the best wireless network card is vista 64 compatible? I play a lot of FPS'es online and want to try to find the best one for me. I just moved and right now I am running a 50ft wire from the living to the second room of the house (so I'm basically 40ft away). Also, how bad will my lag be for games like COD5 with a wireless card? I've only ever hardwired my rig to the router and never gone wireless before. So I'm leary of this move in fear of completely destroying my online playing.
View 7 Replies View RelatedThe network icon (two small computers with a blue world in the middle) on the information task bar located in the lower right corner. Well I was online and a myspace link popped up, after closing it the same link popped up over and over again as it has before, so as I have done before I restarted my computer. When I restated my computer the network icon had an 'x' where the earth would be if the wireless was on. I went to click on the icon and it wouldn't open. I had to right click to log into my wireless. I wasn't so worried until my computer was telling me 'yes i was connected to my wireless' but the icon was saying 'no you're not'. I went to the properties, and removed the icon then replaced it. Same thing. I even shut down my computer, waited, restarted. Same thing.
View 8 Replies View RelatedCan't find a network ng for vista. If this is not the proper ng, point me to the proper one. I admit it, I'm not a computer guy. I recently bought a new (Vista Home Premium) PC to replace my XP PC. On the XP PC I had a wireless network I could access with my PDA and laptop from almost anywhere in my house. With the Vista PC I fail constantly. I have read a handful of web articles on how to accomplish this but I apparently am missing a step.The Netgear router is working on the Vista PC. Firewall on the laptop is (when I'm trying to get a connection) disabled. The Network status on the laptop and PDA show a good signal. How do I troubleshoot this?FWIW,'Connect to a Network' on the Vista PC and laptop show 2 networks - one secured and one unsecured. I don't know why. All I want is the secured. Can I uninstall these wireless networks and create a new one? The Vista PC also has a wired?/cabled? network to access the cable modem and NAS. Does this make a difference?
View 7 Replies View RelatedI have a Toshiba laptop that is connected to a wireless network in my home. My concern is security for this computer. I have been reading alot of articles on the internet concerning security, and most suggest several things, one being encryption, The others are enabeling static ip address and wireless mac address filtering. I contacted Verizon and asked them to help me secure this connection to my laptop and they enabled WEP and assigned a key. I then asked about the other two options mentioned above and they said all i needed was WEP enabled. Finally my question: Is that enough?
View 7 Replies View RelatedIm currently traveling and living at my uncle's house abroad. My uncle has a wireless network, but my laptop can sense every other network BUT their's.....I even got connected to wireless via my own ipod touch, my uncle's laptop (window XP).
View 8 Replies View Relatedi have a wireless router set up which is connected with a wire to my PC. my brother has just brought a brand new laptop. he has full signal to the network however he cannot connect to it. i have turned off all the security encriptions and what not but it still says "cannot connect" ive tried everything i can think of but still nothing. but not nothing connects to it except the mentioned wired PC. ive tried a nintendo DS and a sony PSP bt they get the same error.
View 4 Replies View RelatedThe connection is hit and miss. When initially setting up the profile I have to try 5 or 6 times before the connection set up correctly. Although Vista is making a connection, for some reason it keeps thinking that the 'new network' is a public network, and listed it as an 'Unidentified Network (SSID)'. No internet access is permitted. Customising the network to make it private does not let Vista see the internet. You have to totally delete the Wireless Connection, and repeat the setup until an attempt actually works (no obvious reason why an attempt works or doesn't, it seems random).
Now I have got it such that it automatically connects most times on restart. However, if I do anything during the session to alter the router settings, or of the PC goes to standby, on restart I have the same problem with Vista identifying the WiFi as a 'Public Network' and not permitting internet access. I have an XP laptop connected to the same router, which has no problems reconnecting automatically. Anyone have any ideas how to make the Vista machines automatic reconnect more reliable?
I've got a problem with my wireless network, I've got a dlink adsl2+ router 604gt or something (not at home ATM) it was working fine last night not a problem at all, had dinner then went back to the Internet and it wouldn't work page could not be displayed etc, logged into modem all is good it's got internet acces and working fine. So I left it for the night and this morning I tried again and windows can't seem to get an ip address from the router it comes up with the 169.254 etc etc takes agesbto identify the network and then finally displays limited connectivity. Tried manual settings to no avail, tried restarting both computers and still doesn't work, I just don't know what could have changed in the 45min that I was away from it. modem still registers inter access and looks to be I'm full working order just the computers have a coniption when trying to be friends with it.
View 4 Replies View RelatedWhen I take the laptop to work I can see the wireless network but can't connect. After trying to diagnose the problem, it says it can't and I should see if I'm in range (I am), or if I have permission (I do).
View 4 Replies View RelatedI had a network setup running well, consisting of 3 computers with each one running XP. I replaced my "main" desktop with a new Acer 5100 unit running Vista Premium. It is the only one connected to the router/DSL modem (Westell 327w). Even after reading all the previous posts and responses, I can't get this darned Vista box to see the two XP's that are also on the same network. Only the Windows firewalls (with sharing excepted) are turned on, same workgroup, passwords' use turned off. REGARDLESS OF SHARING SETTINGS, DRIVE PROPERTIES SHOW THAT THE DRIVES are "NOT SHARED." The two XP units show each other but not the Vista box. Vista shows only Vista. 'Bout ready to strip Vista off and reload XP
View 4 Replies View RelatedI am having problems connecting to my router. Vista will not find my network, even though im sat in the same room as it, about 2 metres away. It finds everything else in the street except mine. All the settings are correct for sure, but vista will not find my internet connection at all! I had XP and it worked perfecrt on start up everytime
View 4 Replies View Relatedhave a new laptop trying to set it up with our wireless interenet on our desktop. it is asking for a passkey. i have a network key but that doesn't seem to be working. where can i find my wireless network settings on my desktop to put into my laptop.
View 4 Replies View Related