i have windows home premium 32 bit. i downloaded the blue refresh theme, copied into my WindowsResourcesThemes folder, and then went to personalization and clicked on the theme. it did not do anything but change the transparency. all the bars are still black. so far i have tried 3 themes and none have worked.
View 4 Repliesit doesn't show empty unless i hit refresh
View 6 Replies View RelatedAfter all these years messing with computers, i never knew F5 would refresh your computer.
I must get my head out of these dam games, when are they going to stop making these games, it's all there fault.
I have two user accounts on my home PC. It's Vista Home Premium.
I am administrator on my PC. When I check my user account, it confirms this.
However, when I try, thru a CMD prompt, to do ipconfig /flushdns, I get an error message saying "The requested operation requires elevation."
The prompt is C:UsersBruce which implies I'm not the administrator.
How do I get to the right place to clear the DNS? It's causing me some trouble.
I'm on a home wireless network, just my notebook and the wireless router (attached to a cable modem).
my OS is Vista Ultimate, and I get IP from dhcp server to connect Internet I mean my IP is like 10.x.x.x. When I was using XP, If I use ipconfig/release & ipconfig/renew, then I can get a new IP from dhcp. But now, the method above can't refresh my dynamic IP address. If I want to change my IP address, I must first set a static IP and connect to gateway then disable my ethernet adapter, cancel the static IP and use dhcp again. Finally, MAYBE I can get a new IP. Even I reboot or shut down my computer for a whole day. When my computer gets to dhcp server if there isn't any other computer is USING my IP then I can't get a new one. I want to know, How can I refresh my IP address easily under Vista?
View 5 Replies View RelatedWhen I open my Windows mail, it receives all my email. However, when I try to refresh, I get a message that there was an error but it gives no error detail. To get new emails, I have to close the program and reopen.
View 9 Replies View RelatedI have a desktop Win XP Sp3) and a notebook (Win Vista x64 Sp1) and an HP C6280 printer working through a router. Both computers will print just fine but after I turn the printer on after being down, the Vista machine lists the the printer as offline and I can't get it to 'refresh' to see that the printer is on. Documents just sit in the queue. Nothing seems to work short of uninstall/install.
View 6 Replies View RelatedGetting this error when trying to remove sp1 v.744 An error has occurred. Not all of the updates were successfully uninstalled anything i can do about it ?
View 4 Replies View RelatedI am having problems with my sidebar, and I think with IE as well. It all started when I uninstalled McAfee from my system. When I had it installed, it would freeze my entire computer in seconds, so I uninstalled it. After that my sidebar never worked right again. The gadgets show up, but not correctly. My weather app just had a white box with a little blue "i" in the corner. My analog clock would just have a black face and a red second hand at 12 o'clock that never moved.
I have tried to uninstall and reinstall the gadgets, but with no luck. I have tried a few command prompt .dll commands that I have read in forums, but that didn't help. I read it might be an issue with IE8, so I downgraded to IE7, but that still didn't help. I love the sidebar and want to use it again, but nothing I do works! I also have an issue with my IE7.
I tried to sign up for these forums, but the image verification box wouldn't show up until i tried it in Firefox. I use a browser called Slimbrowser (which is based on IE I believe) and I would like to continue using it, but it may be linked to my IE problem.
When looking for a wireless network to connect to there is no refresh button on the screen that displays found wireless networks. Hit F5 to easily refresh this list.
View 0 Replies View RelatedI am running Vista 64 Home premium. When I boot my system and reach the desktop, all my desktop icons are present and accounted for. Then, all of a sudden they will refresh. It's fairly quick when it happens, but is this normal? It happens on every boot. I have thirteen desktop icons counting the recycle bin. Can someone at least tell me if their Vista 64 OS does the same?
View 5 Replies View RelatedI have Vista Home Premium 32bit for a couple of months now. And the Drag and Drop never worked and still does not work. I mean it doesn't work at all!! I allways have to right click, copy, and paste any file. This is getting realy anoying.
View 9 Replies View RelatedAs youve seen from the title, its the access: local only error! I just built a rig this weekend, hours slaving over the damn beast! I cant connect to the internent, it says "access: local only", after doing a bit of googling i can see it must be a bit of a problem for vista? I can connect to the internet sometimes for small amonuts of time before im shut off! Im using a wierd connection straight into the router, have all drivers installed ect, other comps on the network can connect, just not mine I get a I am also getting "Cannot communicate with DNS server (ip)!! (Think its somthing todo with that!) I tired this Windows Vista cannot obtain an IP address from certain routers or from certain non-Microsoft DHCP servers, but didnt seem to resolve the issue! I also tried disabling ipv6 and setting the DNS in ipv4 settings! Im am at my wits end!
Code:
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net
Ethernet adapter Local Area Connection 2:.....................
I'm using windows media player 11 and the faces of the actors are BLUE!!!!! Tried adj all the display parameters... but still some prob. How do i fix this???
View 6 Replies View RelatedI have lenovo Y550 laptop with vista home premium installed in it. Recently I tried installing many CD/DVD emulator softwares like 'daemon tools' and 'Win CD emulator' which din't worked in my 64 bit system, so I uninstalled them. After this everytime when I triy accessing my pendrive my system just hangs. So, I installed Microsoft's 'fix it' software. It said that there is some problem with some 'APFB3097 IDE controller' and that it can't repair it. When I opened Device manager I saw that driver under storage controller menu. One thing I observed is that, the code which appears before IDE controller is random. It keeps on changing sometimes. Also when I am in safe mode it vanishes and my all my pendrives work as well.
View 5 Replies View Relatedmy wireless connection worked on my xp laptop, but i cannot get it to work on both of my vista laptops. it shows the network but won't connect to it. i tried disabling the ipv6 but that didn't work. i'm trying not to spend the money to have geeksquad do it for us - any ideas on how to get it to work?
View 5 Replies View RelatedStartup repair has run several times now without success and on checking the details the only problem noted was this: Root cause found: System volume on disk is corrupt. Repair action: File system repair (chkdsk) Result: Completed successfully. Error code=0x0 Time taken=681272 ms Does this mean it was repaired? and if so, why can I still not boot up even in safe mode?
View 4 Replies View RelatedI had this problem once before where none of my Restore Points worked. I shut off System Restore, then turned it back on again - then it worked. That was 1-2 months ago. I just needed it and it exhibited the same problem. Both times, it worked in Safe Mode only. But then, I lost all my other Restore Points.
View 4 Replies View RelatedAfter I upgraded to Vista my computer has not worked right. It's slower, needs to be restarted every day, I have no sound and other low memory problems. I have noticed that the windows old file is 43 GB which is almost half of my total memory. Is the best thing to fix my computer to go back to XP or just get rid of large files like the windows old so Vista can run properly.
View 4 Replies View RelatedJust installed sp1 all is working great except my internal USB2.0 Card reader. it isn't being detected. My portable USB Card Reader works fine when I plug it in
View 7 Replies View RelatedI am experiencing a strange power problem with my monitors. I have two, each hooked up to a Radeon HD 800 series video card with dual DVI connectors. The problem is this: When I have my computer working as normal, if I switch off my secondary monitor, and then switch it back on, my primary monitor's display garbles and goes out for a second until my secondary monitor is back on. Also, anything that was displaying on my secondary monitor does not refresh and I can not access those programs. Does anyone know what is wrong and how to fix this?
View 4 Replies View RelatedI can send mail but cannot receive Gmail thru Wndows Mail. I tried not synching, etc. Error reads: could not select (gmail) on the imap server. you might try refreshing your folder list to syncronize with the imap server.
View 4 Replies View RelatedMy home network has several XP Pro SP3 computers that are networked with a common workgroup. My Vista computer is a member of WORKGROUP but isn't networking with WORKGROUP properly, although it connects properly over WiFi to the internet.First, in Explorer, there is a entry named Network (not My Network Places, etc.) that shows only this computer and no entry for WORKGROUP or for the other computers. Also, WORKGROUP is present but is empty (except for this computer) in View Computers and Devices. However, Full Map View shows the other computers and they can be opened with \computername and seen on Net View IP. So, how do I make those computers show up in explorer or View Computers or in some other accessible place? Also, the Vista computer is not visible from the other computers. If searched for with \computername, a error message says "computername is not accessible. You might not have permission ..." Net View IP reports "System Error 5. Access is denied."
All computers are using the WORKGROUP name. Same results with all firewalls disabled. Files are being shared. Private Network, Network discovery On, File sharing On Public Folder sharing On, Password protected sharing off, Media Sharing On, WINS NetBios setting Default. The XP computers are running Link-Layer and NW Link NetBios.
a new vista system, and I cannot get into my email or access some secured sites. I have an XP system with IE7 and it is working fine to get to these sites. I have cleared all the caches, history, temp, etc., did not fix. I have checked all the various SSL including 1.0, did not fix. I have pulled down firewall, did not fix. Of course, put it back up. I have added secure site to list and unchecked require authentication, did not fix. I wish I could download the certificate - but I cannot get to the site! When clicking continue to site, the navigation blocked appears and will not allow me to proceed. I have unchecked the two URL certificate required settings, did not fix. I have tried to download firefox/other browers - will not let me - says downloaded but not done! Also, there is no system restore point - this is a brand new machine. Cannot find any definitive hot fix info on this from microsoft. I have done a complete brower reset, did not fix.
View 6 Replies View Relatedi am running vista 32 bit, system restore/rollback has not worked since i got this a few weeks ago. can anyone advise me on a soloution, every time i try to use it a message states system restore did not restore to the date selected and no files have been changed? but under systore in the pick a date to restore it shows the last restore point which did not work?
View 5 Replies View RelatedI've been using Vista Ultimate for a while, now Windows 7 7100(Which is awesome). In both operating systems, Excel thumbnails have never worked, only for the other office 2007 applications. Anyone know why this is?
View 4 Replies View RelatedWhile everyone was expecting a public RC of the Wave 3 applications last week, a beta refresh made it out this week over at download.live.com. Windows Live Essentials, which refers to the suite of Windows Live client applications (as opposed to web services), consists of a long list of software: Messenger, Mail, Photo Gallery, Movie Maker, Writer, Toolbar, Family Safety, and Office Outlook Connector (which is mysteriously missing in this release). This release includes two new additions, Office Live Add-in (which allows you to open and save documents directly to your online workspace) as well as Silverlight.
Full Story: Windows Live Essentials (including Messenger) beta refresh
I have a copy of Home Premium 64 bit that I have yet to use. I purchased it assuming that I would want to upgrade in the future when the kinks were worked out. With the release of SP1 I am finally considering getting rid of XP altogether and going with Vista straight out. The only problem is, I mostly use my computer for gaming. I know, back when, Vista 64 was a poor option for gamers. Has anything changed with all of the updates? Are there gamers that happily run on Vista 64? How is the performance comparatively to XP 32-Bit? The main reasons I want to upgrade are obvious.. so I can utilize all of my memory, and so I can play games in DX10 mode.
View 9 Replies View RelatedSo far I tried 5 different delete utilities and nothing worked without a reboot! This Vista64 is a PITA when it comes to locked files. Anyone having any luck with an Unlocker clone that works in 64 bit?
View 7 Replies View RelatedThe craziest thing happened my pci wireless antenna which worked fine 3 days ago suddenly stopped working, I start Xp and it works fine, I haven't had any problems before 3 days ago, I've completely formated the partition and re-installed vista x64 ultimate, And still doesn't work, Tried a static ip(which i didn't have to do before)|Also I work at a hotel with a wireless Access point, Then a gateway, then the modem, Does anyone have any idea whats going on? or what might've happened, The wireless properties say ip4 local and ip6 limited and media state enabled.
View 7 Replies View RelatedI'm completely lost here. I just bought an Acer Aspire 4720z at the beginning of the month and I completely regret it already!! It came with Vista Home Premium, 2GB of memory, 120 GB hard drive and intel dual processor 1.83GHZ. About a week after I got it the stupid empowering technology framework errored out and hasn't worked since. I never even got a chance to make the recovery CD since I didn't know I would have to make one and didn't buy any DVD-r's.
Well I called Acer and they say the only way to fix the errors I'm getting is to restore to factory default and they sent me the set of recovery disks that I need. Well I guess I should of just said screw it and left it alone. It gets all the way through the restore to where it restarts then command prompt comes up sayings "Update device driver, please wait" Then the error "Windows could not update the computer's boot configuration. Installation cannot proceed" comes up. I click OK and it restarts the computer and now all I get is "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer and then restart installation".
I have tried to reinstall it probably over 7 times now with the same results. I was on the phone with Acer most the day yesterday. They gave me 2 ISOs to downlaod and burn that format and partition the hard drive. They work but when I go to put Vista on it, I get the same error over and over again. I really don't want to resort to sending it in for repair and they said chances are that's the next step. I'm half tempted just to put XP on it but I've only had it a month and I don't want to void the warranty. ? Let me know if you need any more information about my system.