I have a desktop Win XP Sp3) and a notebook (Win Vista x64 Sp1) and an HP C6280 printer working through a router. Both computers will print just fine but after I turn the printer on after being down, the Vista machine lists the the printer as offline and I can't get it to 'refresh' to see that the printer is on. Documents just sit in the queue. Nothing seems to work short of uninstall/install.
View 6 RepliesWe have a Dell Desktop running XP it connects through USB to our 2Wire Gateway router.
We recently purchased a HP Laptop running Vista x64, it is connected to the same 2Wire through the wireless signal.
Here is our problem. We purchased a HP Photosmart C5580 which is connected to our desktop and functioning fine.
We were told we could connect our laptop to this printer wirelessly all though it has no wireless capability (other than bluetooth which we do not have on our laptop). They said there were two ways to network it so that we would not have to use the USB with our laptop.
What is the easiest way to do about doing this?
I have spent 6 hours on the phone with HPs so called "techs" and they were unable to help at all. Kept trying to connect through bluetooth (which I told them our laptop was not capable of). I called Geek Squad to make sure are laptop was some how to connect to this printer with out a USB as that is the only reason I bought it. They said we could do it 2 ways through networking and that it would be simple enough for me to do on my own.
Is anyone able to help??
I checked out many forums and seen many others with the same or similar problems. I tried all the suggested solutions with no results. I have a home network with 3 XP computers and a Vista laptop (Lenovo x60) running Vista Business. The network using both wired and wireless connections. I installed a NAS (Maxtor Shared Storage 2), and had to change the workgroup name (since the Maxtor could not handle the "@") character.
After I changed the workgroup name on all computer, the vista cannot find my shared printer, neither any of the other computers on my network. The XP machines do not see the vista either. I have internet access from the vista, but cannot print or do backup to the NAS. So far I tried:.................
Trying to network a Vista laptop with an xp desktop. Want to share files and printer on the xp machine. I have downloaded and installed LLTD as suggested by others. Still unable to see the xp machine on the Vista map. Vista is running Norton 360 and the XP is running Norton Antivirus, latest version
I have a WAN in my office made up of certificate security enabled different LANs. Windows file and printer sharing is disabled on this network and the network addresses are alotted using DHCP.Is it possible to share a printer attached to a PC on this network using TCPIP without using Windows printer sharing. What are the required settings for sharing?
View 4 Replies View RelatedPC: HP Windows Media Center PC m8200n; Monitor HP w1907. November 2007. OS: Windows Vista Home Premium. HP: Deskjet F4180. So I noticed that the printer icon for my printer became all white, IE a corrupted icon. So I went online and found information on how to refresh your icon folder. That didn't do anything. So I thought I'd uninstall and reinstall.
I have tried to reinstall my HP software from disc, and I get a 'new PSSWCORE.msi' file. I see the file on the install disc, yet it won't install. 'Network resource is unavailable.'
Now I cannot uninstall it. On my Add/Remove I see:
HP Customer Participation Program 9.0
HP All In One Software 9.0
HP Imaging device Functions 9.0
HP On-Screen Cap/Num/Scroll Lock Indicator
HP Photosmart Essential
HP Update
How can I get these off my PC, and reinstall cleanly so I can use my rinter/scanner again?
After all these years messing with computers, i never knew F5 would refresh your computer.
I must get my head out of these dam games, when are they going to stop making these games, it's all there fault.
I have two user accounts on my home PC. It's Vista Home Premium.
I am administrator on my PC. When I check my user account, it confirms this.
However, when I try, thru a CMD prompt, to do ipconfig /flushdns, I get an error message saying "The requested operation requires elevation."
The prompt is C:UsersBruce which implies I'm not the administrator.
How do I get to the right place to clear the DNS? It's causing me some trouble.
I'm on a home wireless network, just my notebook and the wireless router (attached to a cable modem).
my OS is Vista Ultimate, and I get IP from dhcp server to connect Internet I mean my IP is like 10.x.x.x. When I was using XP, If I use ipconfig/release & ipconfig/renew, then I can get a new IP from dhcp. But now, the method above can't refresh my dynamic IP address. If I want to change my IP address, I must first set a static IP and connect to gateway then disable my ethernet adapter, cancel the static IP and use dhcp again. Finally, MAYBE I can get a new IP. Even I reboot or shut down my computer for a whole day. When my computer gets to dhcp server if there isn't any other computer is USING my IP then I can't get a new one. I want to know, How can I refresh my IP address easily under Vista?
View 5 Replies View RelatedWhen I open my Windows mail, it receives all my email. However, when I try to refresh, I get a message that there was an error but it gives no error detail. To get new emails, I have to close the program and reopen.
View 9 Replies View RelatedGetting this error when trying to remove sp1 v.744 An error has occurred. Not all of the updates were successfully uninstalled anything i can do about it ?
View 4 Replies View RelatedWhen looking for a wireless network to connect to there is no refresh button on the screen that displays found wireless networks. Hit F5 to easily refresh this list.
View 0 Replies View RelatedI am running Vista 64 Home premium. When I boot my system and reach the desktop, all my desktop icons are present and accounted for. Then, all of a sudden they will refresh. It's fairly quick when it happens, but is this normal? It happens on every boot. I have thirteen desktop icons counting the recycle bin. Can someone at least tell me if their Vista 64 OS does the same?
View 5 Replies View RelatedJust installed sp1 all is working great except my internal USB2.0 Card reader. it isn't being detected. My portable USB Card Reader works fine when I plug it in
View 7 Replies View Relatedi have windows home premium 32 bit. i downloaded the blue refresh theme, copied into my WindowsResourcesThemes folder, and then went to personalization and clicked on the theme. it did not do anything but change the transparency. all the bars are still black. so far i have tried 3 themes and none have worked.
View 4 Replies View RelatedI am experiencing a strange power problem with my monitors. I have two, each hooked up to a Radeon HD 800 series video card with dual DVI connectors. The problem is this: When I have my computer working as normal, if I switch off my secondary monitor, and then switch it back on, my primary monitor's display garbles and goes out for a second until my secondary monitor is back on. Also, anything that was displaying on my secondary monitor does not refresh and I can not access those programs. Does anyone know what is wrong and how to fix this?
View 4 Replies View RelatedI can send mail but cannot receive Gmail thru Wndows Mail. I tried not synching, etc. Error reads: could not select (gmail) on the imap server. you might try refreshing your folder list to syncronize with the imap server.
View 4 Replies View Relatedit doesn't show empty unless i hit refresh
View 6 Replies View RelatedWhile everyone was expecting a public RC of the Wave 3 applications last week, a beta refresh made it out this week over at download.live.com. Windows Live Essentials, which refers to the suite of Windows Live client applications (as opposed to web services), consists of a long list of software: Messenger, Mail, Photo Gallery, Movie Maker, Writer, Toolbar, Family Safety, and Office Outlook Connector (which is mysteriously missing in this release). This release includes two new additions, Office Live Add-in (which allows you to open and save documents directly to your online workspace) as well as Silverlight.
Full Story: Windows Live Essentials (including Messenger) beta refresh
I?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View RelatedI just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies View RelatedI have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies View Relatedi have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies View RelatedI've been reading around for quite a while now, looking for an answer to my problem with no luck in sight (so far). I've recently upgraded to Vista using a dual boot setup with XP. I have a 42" Sharp Aquous (1080p) display through DVI-HDMI. In Windows XP, using the default "Plug and Play Monitor" driver, I'm able to use 75Hz or 85Hz at 1920x1080 (which the monitor does support). In Vista however, with the "generic pnp monitor" driver, it won't allow anything other than 60Hz, regardless of the 'hide modes' check box. Now, some people would say that 60Hz should be fine for an LCD monitor, but here's the problem. With 60Hz, for some reason, the actual screen display size is somewhat smaller than the actual screen size (about a 1-1/2" border all around) which was the case in XP as well (issue with the sharp display i suppose). In 30Hz, the display size is perfect (just as in 75 or 85Hz), but at 30 it becomes very blurry and terrible with any motion on the screen. So basically, I can only use this monitor at either 75 or 85Hz.
This has to be a Vista OS problem (and not at fault by the ATI display drivers). I've read that some people have had similar problems with their CRT monitors as well. Some have suggested using refresh rate forcing programs, but since they were all made for XP, none of them work in vista (I've tried reforce, refreshlock, pstrip and reschange). how to remove the 60Hz cap, or make a custom monitor driver that will allow it?