my wireless connection worked on my xp laptop, but i cannot get it to work on both of my vista laptops. it shows the network but won't connect to it. i tried disabling the ipv6 but that didn't work. i'm trying not to spend the money to have geeksquad do it for us - any ideas on how to get it to work?
View 5 RepliesThe craziest thing happened my pci wireless antenna which worked fine 3 days ago suddenly stopped working, I start Xp and it works fine, I haven't had any problems before 3 days ago, I've completely formated the partition and re-installed vista x64 ultimate, And still doesn't work, Tried a static ip(which i didn't have to do before)|Also I work at a hotel with a wireless Access point, Then a gateway, then the modem, Does anyone have any idea whats going on? or what might've happened, The wireless properties say ip4 local and ip6 limited and media state enabled.
View 7 Replies View RelatedAfter I upgraded to Vista my computer has not worked right. It's slower, needs to be restarted every day, I have no sound and other low memory problems. I have noticed that the windows old file is 43 GB which is almost half of my total memory. Is the best thing to fix my computer to go back to XP or just get rid of large files like the windows old so Vista can run properly.
View 4 Replies View RelatedI Just want to know why my screensaver doesn't work using a Microsoft wireless laser mouse, also microsoft wireless keyboard, windows vista.
View 9 Replies View RelatedI am having problems with my sidebar, and I think with IE as well. It all started when I uninstalled McAfee from my system. When I had it installed, it would freeze my entire computer in seconds, so I uninstalled it. After that my sidebar never worked right again. The gadgets show up, but not correctly. My weather app just had a white box with a little blue "i" in the corner. My analog clock would just have a black face and a red second hand at 12 o'clock that never moved.
I have tried to uninstall and reinstall the gadgets, but with no luck. I have tried a few command prompt .dll commands that I have read in forums, but that didn't help. I read it might be an issue with IE8, so I downgraded to IE7, but that still didn't help. I love the sidebar and want to use it again, but nothing I do works! I also have an issue with my IE7.
I tried to sign up for these forums, but the image verification box wouldn't show up until i tried it in Firefox. I use a browser called Slimbrowser (which is based on IE I believe) and I would like to continue using it, but it may be linked to my IE problem.
I have Vista Home Premium 32bit for a couple of months now. And the Drag and Drop never worked and still does not work. I mean it doesn't work at all!! I allways have to right click, copy, and paste any file. This is getting realy anoying.
View 9 Replies View RelatedAs youve seen from the title, its the access: local only error! I just built a rig this weekend, hours slaving over the damn beast! I cant connect to the internent, it says "access: local only", after doing a bit of googling i can see it must be a bit of a problem for vista? I can connect to the internet sometimes for small amonuts of time before im shut off! Im using a wierd connection straight into the router, have all drivers installed ect, other comps on the network can connect, just not mine I get a I am also getting "Cannot communicate with DNS server (ip)!! (Think its somthing todo with that!) I tired this Windows Vista cannot obtain an IP address from certain routers or from certain non-Microsoft DHCP servers, but didnt seem to resolve the issue! I also tried disabling ipv6 and setting the DNS in ipv4 settings! Im am at my wits end!
Code:
Windows IP Configuration
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : gateway.2wire.net
Ethernet adapter Local Area Connection 2:.....................
I'm using windows media player 11 and the faces of the actors are BLUE!!!!! Tried adj all the display parameters... but still some prob. How do i fix this???
View 6 Replies View RelatedI have lenovo Y550 laptop with vista home premium installed in it. Recently I tried installing many CD/DVD emulator softwares like 'daemon tools' and 'Win CD emulator' which din't worked in my 64 bit system, so I uninstalled them. After this everytime when I triy accessing my pendrive my system just hangs. So, I installed Microsoft's 'fix it' software. It said that there is some problem with some 'APFB3097 IDE controller' and that it can't repair it. When I opened Device manager I saw that driver under storage controller menu. One thing I observed is that, the code which appears before IDE controller is random. It keeps on changing sometimes. Also when I am in safe mode it vanishes and my all my pendrives work as well.
View 5 Replies View RelatedStartup repair has run several times now without success and on checking the details the only problem noted was this: Root cause found: System volume on disk is corrupt. Repair action: File system repair (chkdsk) Result: Completed successfully. Error code=0x0 Time taken=681272 ms Does this mean it was repaired? and if so, why can I still not boot up even in safe mode?
View 4 Replies View RelatedI had this problem once before where none of my Restore Points worked. I shut off System Restore, then turned it back on again - then it worked. That was 1-2 months ago. I just needed it and it exhibited the same problem. Both times, it worked in Safe Mode only. But then, I lost all my other Restore Points.
View 4 Replies View RelatedMy home network has several XP Pro SP3 computers that are networked with a common workgroup. My Vista computer is a member of WORKGROUP but isn't networking with WORKGROUP properly, although it connects properly over WiFi to the internet.First, in Explorer, there is a entry named Network (not My Network Places, etc.) that shows only this computer and no entry for WORKGROUP or for the other computers. Also, WORKGROUP is present but is empty (except for this computer) in View Computers and Devices. However, Full Map View shows the other computers and they can be opened with \computername and seen on Net View IP. So, how do I make those computers show up in explorer or View Computers or in some other accessible place? Also, the Vista computer is not visible from the other computers. If searched for with \computername, a error message says "computername is not accessible. You might not have permission ..." Net View IP reports "System Error 5. Access is denied."
All computers are using the WORKGROUP name. Same results with all firewalls disabled. Files are being shared. Private Network, Network discovery On, File sharing On Public Folder sharing On, Password protected sharing off, Media Sharing On, WINS NetBios setting Default. The XP computers are running Link-Layer and NW Link NetBios.
a new vista system, and I cannot get into my email or access some secured sites. I have an XP system with IE7 and it is working fine to get to these sites. I have cleared all the caches, history, temp, etc., did not fix. I have checked all the various SSL including 1.0, did not fix. I have pulled down firewall, did not fix. Of course, put it back up. I have added secure site to list and unchecked require authentication, did not fix. I wish I could download the certificate - but I cannot get to the site! When clicking continue to site, the navigation blocked appears and will not allow me to proceed. I have unchecked the two URL certificate required settings, did not fix. I have tried to download firefox/other browers - will not let me - says downloaded but not done! Also, there is no system restore point - this is a brand new machine. Cannot find any definitive hot fix info on this from microsoft. I have done a complete brower reset, did not fix.
View 6 Replies View Relatedi am running vista 32 bit, system restore/rollback has not worked since i got this a few weeks ago. can anyone advise me on a soloution, every time i try to use it a message states system restore did not restore to the date selected and no files have been changed? but under systore in the pick a date to restore it shows the last restore point which did not work?
View 5 Replies View Relatedi have windows home premium 32 bit. i downloaded the blue refresh theme, copied into my WindowsResourcesThemes folder, and then went to personalization and clicked on the theme. it did not do anything but change the transparency. all the bars are still black. so far i have tried 3 themes and none have worked.
View 4 Replies View RelatedI've been using Vista Ultimate for a while, now Windows 7 7100(Which is awesome). In both operating systems, Excel thumbnails have never worked, only for the other office 2007 applications. Anyone know why this is?
View 4 Replies View RelatedI have 2 wireless cable modems. One an older Ambit 2000 wireless and another is a docis 3 Ubee. I'm beta testing the D3 modem for work and can hard wire into it fine, connect wireless with winXP just fine and on my ipod touch fine. Vista will see it, connect to it, but I get Local only. This is where I'm stuck. Vista will connect just fine to my other wireless connection just fine, using that one right now. Just through the D3 modem it wont connect to the internet.
View 5 Replies View RelatedI have a copy of Home Premium 64 bit that I have yet to use. I purchased it assuming that I would want to upgrade in the future when the kinks were worked out. With the release of SP1 I am finally considering getting rid of XP altogether and going with Vista straight out. The only problem is, I mostly use my computer for gaming. I know, back when, Vista 64 was a poor option for gamers. Has anything changed with all of the updates? Are there gamers that happily run on Vista 64? How is the performance comparatively to XP 32-Bit? The main reasons I want to upgrade are obvious.. so I can utilize all of my memory, and so I can play games in DX10 mode.
View 9 Replies View RelatedSo far I tried 5 different delete utilities and nothing worked without a reboot! This Vista64 is a PITA when it comes to locked files. Anyone having any luck with an Unlocker clone that works in 64 bit?
View 7 Replies View Relatedwe have a netgear wireless router and vista is NOT recognizing it! i've called netgear and they've said that the problem is w/ dell and these dell idiots wanna charge me $200! so i figured i would ask here
View 9 Replies View RelatedJust got a new Dell Desktop with wireless card pre-installed. I have an existing wireless router that all three of my other machines (XP) can see and connect to just fine. No matter what I seem to do, the Vista machine tells me there are no networks available. I've tried re-booting, re-freshing the Network list, waiting and re-freshing, turning off various automatic features, etc. Nothing seems to work and I need to connect to the Internet to update the PC with the numerous security patches Vista needs when first
starting up.
Any got experience of wireless N dongle that works good in Vista 64? I want it for my htpc. I have a D-link DI-855 router. OS: Win Vista 64 Ultimate
View 6 Replies View RelatedI'm completely lost here. I just bought an Acer Aspire 4720z at the beginning of the month and I completely regret it already!! It came with Vista Home Premium, 2GB of memory, 120 GB hard drive and intel dual processor 1.83GHZ. About a week after I got it the stupid empowering technology framework errored out and hasn't worked since. I never even got a chance to make the recovery CD since I didn't know I would have to make one and didn't buy any DVD-r's.
Well I called Acer and they say the only way to fix the errors I'm getting is to restore to factory default and they sent me the set of recovery disks that I need. Well I guess I should of just said screw it and left it alone. It gets all the way through the restore to where it restarts then command prompt comes up sayings "Update device driver, please wait" Then the error "Windows could not update the computer's boot configuration. Installation cannot proceed" comes up. I click OK and it restarts the computer and now all I get is "The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install windows, click "OK" to restart the computer and then restart installation".
I have tried to reinstall it probably over 7 times now with the same results. I was on the phone with Acer most the day yesterday. They gave me 2 ISOs to downlaod and burn that format and partition the hard drive. They work but when I go to put Vista on it, I get the same error over and over again. I really don't want to resort to sending it in for repair and they said chances are that's the next step. I'm half tempted just to put XP on it but I've only had it a month and I don't want to void the warranty. ? Let me know if you need any more information about my system.
i have been able to locate wireless networks and connect to unsecured ones, but i have been unable to connect ot my WPA-PSK wireless lan network. I tried removing the security, and this works, but as soon as i re-enable the security, it's not having it. i've tried using different forms of encryption but still no luck.
View 9 Replies View RelatedI was wondering if anyone can tell me how to find the mac address for my wireless card in vista. I'm having some difficulty as neither ipconfig /all nor wireless card properties from device manager seems to have the info. I know I could physically look at the card and get the number, but I would really like to learn how to find it through the software.
View 5 Replies View RelatedI'm running Vista Home edition on my laptop and when I use my laptop at home, it keeps on connecting to an unsecured default wireless network, instead of connecting to my home network, which is named and is secured. I guess one of my neighbours decided to just run their wireless network like that. How can I prevent my laptop from connecting to other networks other than the ones I specify? I've looked in the settings and options in the wireless connection management utility in Vista and couldn't find a way to do that. Perhaps i didn't look hard enough,
View 4 Replies View RelatedNewbie to Vista also so I am looking for your expertise/input to guide me in a computer selection...I am looking to buy a laptop. Do not need many bells or whistles, however, here are the specs: .......I have been told that running Microsoft Windows Vista on wireless will take "forever" to load with only 2GB on this computer. Is this true? My needs are very limited for this laptop, just looking to perform limited work on it...e-mail, small business folders etc. I apologize for my ignorance, as I said I am a newbie in many ways and hoping to learn as I go. Stumbled upon this web-site while looking for information on Windows Vista.
View 8 Replies View RelatedWell, I have the following, known, error: "The service User Profile-Service failed the logon. The User Profile could not been loaded" (note I've got the Dutch version, so my error messages may be a bit confusing ^^) I've already tried multiple tuturials to fix this, containing tut's of your Administrator Brink. None worked. Now, what happens to be:
After creating the profile through the User Aaccount Management console, I choose for the option "Logon to other user", and try to login to my newly created account. After typing the pass the above error message appears. I only have my (first) admin account that works, but I want to have more accounts on my notebook............
I have a Vista laptop with Home Basic. My other 3 XP laptops can connect to my wireless network ok. I use a Vigor 2600 with firmware v1.06.7.04.2 with wpa/psk 64 bit, mac enabled and hidden ssid. On my Vista laptop from the control panel, network & sharing centre, if i select connect to a network, the following shows; Unamed network - security enabled (there are no other networks round about me). If I select"manage networks" I can see my own named network. I cannot conect to this unless i remove my encrtptionand as numerous forums have reported Vista does not offer PSK when manually configuring a wireless network.
View 4 Replies View RelatedI have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies View Relateda friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies View Related