Turned On PC And Wont Get Any Video / Getting Boot Error?
Oct 26, 2007
one day I turned on my pc and had no video, thought my on board went bad. Got a video card, didnt work. Decided to try the on board again, worked.Now it said there was a boot error at drive B. I didnt think I had a drive mapped to B.I ran a DOS boot disk and did a fdisk and it said there were no fixed drives, so I figured that it was a bad HD, got a new HD, changed it, still a problem. I have to start out with the DOS disk then I can pop in a Win2K boot disk and tryed to install. Cant find the setup or install file on Boot Disk 1. Wont boot from CD to install 2K.
having a problem with my computer. when i visit Internet.com to watch videos, sometimes i get a message that says this: "hello, you either have javascript turned off or an old version of adobe's flash player. get the latest flash player." the video does not play. however, other videos load up just fine. the same thing happens on myspace videos. also, if i go to websites that have flash based games, they work just fine. what could be going on here? i am running windows xp.
Recently I was playing a game, when my screen froze. I then shut my computer down to restart it, used it a few times (in 4-bit safe mode), then after I shutdown again, I cant log back in... it just freezes and the screen flashes, I cannot boot into my computer setup (default f2) or into safe mode (default f8), however I can run the XP cd and get into the recovery console, is there any way that I can change the boot sequence from the recovery console? The screen is dotted with a bunch of dots up and down the screen in columns, and is in 4-bit video mode.
I have a Dell xps gen 5 with xp home.
the error I get is:
"Error: Cant enter setup. Video Mode 103 not supported by this video card."
"you have JavaScript turned off " this message turned up once. I get pictures in the email or in programs and I get a big white squre with a little stamp in the upper left corner. is there some way to get the picture? I do not know what javascript is or how to turn it on.
Things worked well until I connected a USB 2.0 Sony DVD burner [ owned by an associate ]. With PC & Sony burner turned off, I connected the Sony burner. Booted to Windows. Turned on Sony. Windows identified mass storage device & Sony burner. I re-started, and can't get beyond the Win XP Startup menu. Suggestions other than FFR [ fdisk, format, re-install ] and booting with the CD [ yes, I have an official Microsoft Win XP SP1 disk ] to run the repair will be appreciated. Also, I'm not interested in Linux, MAC or any other OS at this time. Soon, perhaps, but not tonight.
i had was my motherboard cpu fan not working in its cpu fan pin, so instead i have it hooked up to a case fan pin. I am not sure if this means i have a faulty mobo or not.
I installed my brand new Creative sound card, I installed its software and drivers all fine and the PC restarted fine. Next creative wanted to update the drivers and I let it. After it was done installling the new drivers it needed a restart. On restart I could not even get to the post screen and was displayed with an error saying USB over current, PC shutdown in 20 seconds. At first i could not get past this error at all, so i tried taking out the sound card and putting inserting it again. I did not get the USB error now and was happy.
I played Battlefield 2142 for a few hours then shut it down. Now today when i get home from work and turn it on i saw that USB over current error again and got frusterated. After taking the sound card out and putting it back in I had some new problems. I only saw my Asus Splash screen saying "press delete to enter setup" although pressing delete did nothing, it just hung on that screen.
I am having problems with windows and graphics. I recently upgraded my computer to an Athlon 64 3500+ with an Asus (ATI) X300 PCIe graphics card. Since then I have not been able to play DVDs as PowerDVD locks up straight away and WinDVD 5 comes up with the error “Create overlay failed. lower your screen resolution or colour depth & try again�. I often experience the graphics card resetting and sometimes failing when playing modern games (Far Cry etc). I thought that the graphics card was not up to
I am getting an error while trying to install the latest international drivers for my laptop computer Windows XP Home Edition Service Pack 2 (build 2600) NVIDIA GeForce FX Go5700 [Display adapter] 3.20 gigahertz Intel Pentium 4, 8 kilobyte primary memory cache 512 kilobyte secondary memory cache
I've formatted my hard drive and reloaded windows xp when i installed my game it tells me my pc don't have enough video memory but that same game use to work before can anyone tell me what is missing?
Whenever I open my video folder, it closes the explorer and says error. It happens with several .avi file. For Example, I have .avi file called A B C; the explorer closes whenever file A is in the folder. When it's out of the folder, the explorer works just fine without closing. I use Matroska pack codec, is this the problem? I remember on the error message says something about the codec is not compatible?
I did a clean install of Xp Home edition with SP2 and current updates and applications. There were no problems until I went to use the DVD playback feature in Nero Suite (Nero Showtime) the program had sound only, no video and after a few minutes it froze. The event log said ''Win XP error hanging App''. Why is this happening?? Is it another one of those Unknown error things with windows Xp?
I have Win XP and am trying to go from a DOS window to full screen. If I hit Alt-Enter, I get an error message saying it can't display that video mode.I downloaded a new driver for my video card, but same problem.
Trying to fix my friends computer thought I would be done in an hour or so but I ran into a retarded problem when trying to boot from the windows cd. Here is some information I know off the top of my head. If you have any input please let me know, I'm trying to get this done before tonight since its Friday
Computer is connected on a router, internet work fine. i just got a second computer today i formated it and installed windows XP pro on it all went fine, i installed lan video card, but when i try to connect its show an error page, the connection say i am connected and all.
Operating system Pentium 3 XP PRO VIDEO CARD ? DRIVERS? BLUE SCREEN: A problem has been detected and windows has been shut down to prevent damage to your computer. The problem seems to be caused by the following file: vga64k If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps: The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly. Please check with your hardware device vendor for any driver updates. Technical information:
*** STOP: 0X000000EA (0X822D7940, 0X82310168, 0X823D5108, 0X00000001) vga64k Beginning dump of physical memory Physical memory dump complete. Contact your system administrator or technical support group for further assistance.
I have had few troubles with my laptop + 2PCs in belkin network. The last problem to resolve on my PC: Window has recovered from a serious error, send message etc.Problem caused by Device Driver Active desctop Recovery Click :Restor My Desktop Click An error has occured in the script page
i have read all of the faq's and trouble shooting guides as to why windows media player 10 cannot play .avi files on my computer. i have no idea what kind of video card i have so i dont know if i can get the drivers for it.the playback is green and choppy but i can hear the audio, it does not do this with all movie files i beleive it is only .avi's.
ive a question about a "Generic host process encountered a problem and finally ive decided to format my hd. reinstalled win xp family, and i noticed that neither my sound nor my video card was working and that i couldn t use usb devices that usually work without drivers. i plugged my internet connection (cable) and then ie always crashed. so i did not manage to download windows updates this way. i decided to active auto-updates, and, a few seconds later, ive seen the message: "Generic host process for win32 services encountered a problem".
I"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done: 1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%) 2)Removing all connected Componets and rebooted, same problem. 3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
I have managed to put video footage onto my PC from a video cassette (by plugging my VCR into the TV aerial socket). The video footage is saved on my PC as .mpg files & when I open them, they play fine on Windows Media Player.When I import them on to Windows Movie Maker, they are recognised as video footage and I am able to put them into the collections as video. However, for some reason, when I drag them onto the timeline, they go onto the audio line & I can't get them to go on the video line, so when I play it, the sound plays but there is no picture. I have tried saving them as .AVI files but that makes no difference
I have window XP SP2 installed on my laptop. I also use InterVideo WinDVD Creator for video editing. Recently when I try to import video file into my application, my laptop, processing percentage goes up to 98%, and the application just freezes up. I also tried the Microsoft movie maker software and I get the same result. I was wondering if I need to reinstall the application or there is something that my laptop is missing. The application was functioning fine until 2 days ago, and since then I haven't installed any other application.
My Windows Media player 10 is trying to play some video clips as songs rather than video clips. This has only recently happened. Do I need to purchase some decoder to fix it or is there a down oad for it?
Some of my video files are not working for want of Indeo Video Codec. I have been working on a video convert tool as my last application. I do not know what happened and this got corrupted. It gives pop up message for MS Encarta Video files saying "The program you are trying to run requires a current Indeo codec To obtain a current driver that is compatible with this version of Windows, please contact the manufacturer at http://indeo.ligos.com.". When I check with them, they ask me to contact OS supplier
The problem is the computer keeps losing its video display. Just went black. I reinstall the drivers and restart and the computer runs fine. Use fine, then after its been on for awhile it goes black again. Weird. I have the newest drivers and all the windows updates loaded. It just keeps going out. I have tried several screens as well to rule out the monitor freaking out.
I had had 2 operating system on 2 hard drives (XP and Vista) I took vista off and replaced it with media center. I could boot both xp and media center but the vista boot screen always shows up and would have to go into "ealier versions of windows" and choose my OS from there. I read somewhere to get rid of the vista boot screen I should delete "bootmgr" file and "boot" folder from the root of C: I did this and now nothing works. It tries to boot into vista boot screen but it says files are missing and resets
I am having probllems installing Windows XP, first of all the installation is unusually slow, it has more than 5 hours installing. Then i have a boot error from Windows NOT from the BIOS, i have tried getting into the Repair Console an using FIXMBR and FIXBOOT, unsuccesfully; removed every suspecious setting on my BIOS..... The installator copies small parts, copy 1% or 2% and stops for a while (I think it is decompressing the files, but that slow!?). After that i get a booting error (I dont remember what does it says; i will post it later, when my 4th attemp ends).
I imported a video of 90 min length onto my computer. When I imported it into Movie Maker the final quarter skips and the video and audio are disjointed. What caused this?
just got a new computer recently and updated the media player to windows media player 11 but when i try to play a video file it just plays the audio with no video.. anyone know why this is or have any tips?
I hooked up my Xbox to my PC to play online using my monitor, only to find out that my NVidia Geforce4 Ti 4200 can only display a max resolution of 720x480 through my capture software, and this ain't good enough for me. Does somebody know of any specific card/adapter TV Tuner that has an S Video input and could give me resolution over 1024 pixels under $100.
