I am getting an error while trying to install the latest international drivers for my laptop computer
Windows XP Home Edition Service Pack 2 (build 2600) NVIDIA GeForce FX Go5700 [Display adapter] 3.20 gigahertz Intel Pentium 4, 8 kilobyte primary memory cache 512 kilobyte secondary memory cache
Recently I was playing a game, when my screen froze. I then shut my computer down to restart it, used it a few times (in 4-bit safe mode), then after I shutdown again, I cant log back in... it just freezes and the screen flashes, I cannot boot into my computer setup (default f2) or into safe mode (default f8), however I can run the XP cd and get into the recovery console, is there any way that I can change the boot sequence from the recovery console? The screen is dotted with a bunch of dots up and down the screen in columns, and is in 4-bit video mode.
I have a Dell xps gen 5 with xp home.
the error I get is:
"Error: Cant enter setup. Video Mode 103 not supported by this video card."
you know download site for VGA compatiable video drivers for Win XP Pro? I've been to ATI, ASUS, and even downloads.com but I can't seem. I'm installing on a clean hard drive.
View 1 Replies View RelatedI am having a problem with the Sisgrv display and I need to update my video driver but the problem is for some reason I am having trouble finding out exactly what I need to update. How do I find out what video driver this system uses I know this is a very basic question, but I recently switched computers
View 9 Replies View RelatedI have a new video driver for my monitor but cannot install it. I am running XP Home Edition. I go to settings>advanced>monitor but the properties button is grayed out and I cannot select it.
View 2 Replies View RelatedCurrently I have only 16 colors and 800x600 desktop area. NT is using the "Default Monitor" and I did not boot in VGA mode. My video card is AccelGraphics Venus DGX4 Rev 2.1A . I tried to find a driver and what I did find was for Win98. I tried that and it started asking for files - vbrun300.dll and I could find that, then it asked for threed.vbx - is this going to work even if I get all the required files? Is there a NT driver for this video card?
View 4 Replies View RelatedI get a little pop-up message you know. install latest windows xp updates so i'm like. OK i'l just get this over and done with. I turn the computer off let windows do it's thing, turn it back on now I'm getting dots on the screen. They look like little droplets and most of the time they're blue. i get to the windows xp log-in screen now this is the "fun" (annoying/main part). WHENEVER I move my mouse cursor over the account tabs the computer just freeze's then the screen goes black, doesn't do anything after that. So I gave my friend a call who's a computer technician, he said that my video card is blown and that I will have to get a new one. My heart just dropped out of my but there for about 5 minutes. I gave my brother a call and he thinks otherwise. He said to do a system restore but this is another "fun" (annoying/main part). I'm trying to do a system restore on the PC (in safe mode) and it doesn't want to seem to work. First of all there are NO bold dates to choose from which is very strange as I applied a Windows XP update shortly before I did this update that screwed the PC up. And nothing came up, and another even f'd up thing is that I can' choose what months to go from. That little arrow that let's go go to previous months and months after? Click that, doesn't do anything. So I gotta wait for my bro to come back from Canberra for the meantime which should be i n around a weeks time or so. But ugh I can't wait that long i'm gonna die of boredom here. So I am begging all.. of you. from the bottom of my heart, is there ANYTHING absolutely ANYTHING I could do to FIX this? I'm so close to throwing this thing out the window Badluck seems to be coming from all sides at me lately and I really can't put up with this.
View 14 Replies View RelatedI recently had to reformat my PC and now I need to reinstall my video card and sound card drivers. The only problem is, I don't have the driver CD anymore. when I try to find out what my video/sound cards are I draw a blank because they don't seem to be displayed anywhere (display properties/settings/advanced/adapter). All adapter type and adapter information are all I know my video card is ATI but that's all I know and as for the sound card - I haven't a clue what make that is. I've been on the ATI website but there are so many drivers I don't know which one to download/install.
View 7 Replies View Relatedfind out weither it is corrupted or not
View 1 Replies View RelatedDay three and I'm frustrated. I know it's something I am doing. I have Win2K installed. It installed the default VGA monitor. I have the video drivers for Trident Blade 3d/mvp4. This is a onboard video. When I use add new hdw, and add new dev, have disk, I see the options for trident drivers. When I select any of them, Windoze complains it can't find the auto settings and will not install. I am doing wrong, other than using 2K does any one have the drivers for a soundmax
View 2 Replies View RelatedMy dell 4700 says it is using a "generic" video driver and I should install the proper one from manufacturer. tried dell driver site, clik download and takes me to a "internet connection failure" screen. internet is fine though. problem started trying to play Sims apt. life and new program for VHS to DVD transfer. both said DirectX 9 was problem- reinstalled that then found "generic" video driver.
View 4 Replies View RelatedThis tweak is used prevent windows XP from using mirror Video driver when accesing some program.1.Some program or games like Ghost Recon, use alternate Video driver when it can't recognise the Primary Video card driver.2.Alternate driver lack AGP support and performance. So this tweak will prevent window XP from using this alternate driver whenever it was called for.3.Some bug may appear when using the primary Video driverHere's how to do it:-Run Regedit.-Go to. --> "HKEY_LOCAL_MACHINESYSTEM CurrentControlSetControlVideo"-There will be 4 'display device GUID' key.-Expand all 4 key.-Open the 'subkey' labelled "000" -Change any 'DWORD' value labelled "MirrorDriver" from '1' to '0'.-Close regedit, restart.4. My graphic card is soo slow (SiS based graphiccard) so, if my AGP texturing capabilities disabled, my computer will go soo slow.5. I use a program named "POWERSTRIP" to determine my AGP capabilities (and to overclockmy Graphic Card).
View 9 Replies View RelatedVideo driver not working, blank screen after Windows logo.
OS Windows XP-1 upgraded to XP-2.
Lost my video driver, on my older HP 951 computer.
It came with XP-1, I upgraded a long time ago.
I tried to recover with both the XP-1 & XP-2 disks, won't work.
I have net access, obviously on a newer computer.
Is there a way I can download a driver and install it on my 951, OR recover the driver, that must be there?
It boots up, but after showing the Windows "Logo Screen", it's black. I just have some old info. and files on it, I really would like to keep.
I am working on a TradeWin model 903JS98M6H8PC40. I need a video driver for this PC. I am finding out that this is an odd PC to find drivers for
View 4 Replies View RelatedHP Pavilion 6870us laptop. As you can research, this computer came with an nVidia GeForce 8400gs graphics card to accompany Windows Vista. (Ick) I don't say that from a very valid standpoint, for I just find XP much lighter and easier to navigate. Like I'm running the computer, not the other way around. Well, I used the Vista installed partitioner to segregate a little chunk of my hard drive so that I could put XP onto the computer as well as Vista. While this was successful, I'm having a miserable time trying to find a driver for this video card. I've tried installing the Vista version, but it starts screaming that I'm retarded and that it's only for Vista (naturally). I know most of the drivers that were used in the Vista format work for XP as well.
View 3 Replies View RelatedI had a .dll file disappear due to the loading of a new video driver. I have googled it and downloaded it, but I don't know where to place it within my windows directory tree in order to solve the problem. I have tried to place it in the windows root directory, the windows/system directory, and the windows/system32 directory, all to no avail.
The .dll file is MSVCP71.DLL.Can anyone point me in the right direction?
I was updating a video driver, then restarted my computer. It takes a LONG time to boot up, then flashes an error message on the screen for a second, then restarts. I've tried holding down F8 to startup in safe mode, but it doesn't respond. Also, even when I have the win xp CD in while rebooting to try to repair the OS (yes, the CD drive is the 1st boot device), it won't recognize the CD either. I'm in a heap of trouble without my computer;
View 7 Replies View RelatedI was surfing around and then all of a sudden my wallpaper is a warning box saying that there is spyware detected and I need to install an antivirus or spyware remover to clean up my computer. When I right click the desktop it just has "themes, appearance, and settings" no "desktop" or "screensaver" By the way it's on a Dell Inspiron E1505 laptop.
View 2 Replies View RelatedI am trying to upgrade from a Powered By ATI Radeon 9200 SE Gamer video card to a manucfatured by ATI All-In-Wonder Radeon X800 XT 256Mb AGP video card. While trying to uninstall the driver for my old GeCube Radeon 9200 SE card, I get the following error message: It says RUNDLL in the very upper left corner. The error message says, "C:WINDOWSsystem32atiiiiexx.dll,_InfEngUnstallFFile_RunDll@16 -Force_restart-flags:0x2010001 -inf_class:DISPLAY -clean" NOTE: where the smiley is, it should be D
My system is a custom-built AMD Athlon 64-bit 3000+ with 1Gb RAM running XP Pro
After I formatted my computer, the sound of my pc lost and our monitor starts to flitter every time i scroll down. I'm thinking that our video card had been erased and need to be install again but I don't know how. I've already look in device manager but its not there.
View 6 Replies View RelatedI have the XP Auto Update feature set to notify me of available updates but not to download or install. After installing the latest driver, the 93.71 version I'm getting the Notification Icon on the task bar telling me an update for the Nvidia Card is available, version 52.16, I guess the basic update that was downloaded as part of the SP3 update.Is there a way to dismiss this update so that it doesn't continue to appear? For some reason the auto update doesn't recognize there is a newer driver available, the WHQL 93.71.
View 6 Replies View RelatedRunning XP Home on a desktop machine - When desktop loading - windows background is normal - as load gresses to load icons the screen goes all blue then changes to white background. Not able to change this themes show as 'modified theme' Unable to change this or the background colors ! The system was heavily infected with virus/adware but is now clean..
AL,,
I have updated video (SIS Mirage driver) No errors shown in device manager.
i had was my motherboard cpu fan not working in its cpu fan pin, so instead i have it hooked up to a case fan pin. I am not sure if this means i have a faulty mobo or not.
I installed my brand new Creative sound card, I installed its software and drivers all fine and the PC restarted fine. Next creative wanted to update the drivers and I let it. After it was done installling the new drivers it needed a restart. On restart I could not even get to the post screen and was displayed with an error saying USB over current, PC shutdown in 20 seconds. At first i could not get past this error at all, so i tried taking out the sound card and putting inserting it again. I did not get the USB error now and was happy.
I played Battlefield 2142 for a few hours then shut it down. Now today when i get home from work and turn it on i saw that USB over current error again and got frusterated. After taking the sound card out and putting it back in I had some new problems. I only saw my Asus Splash screen saying "press delete to enter setup" although pressing delete did nothing, it just hung on that screen.
I am having problems with windows and graphics. I recently upgraded my computer to an Athlon 64 3500+ with an Asus (ATI) X300 PCIe graphics card. Since then I have not been able to play DVDs as PowerDVD locks up straight away and WinDVD 5 comes up with the error “Create overlay failed. lower your screen resolution or colour depth & try again�. I often experience the graphics card resetting and sometimes failing when playing modern games (Far Cry etc). I thought that the graphics card was not up to
View 8 Replies View RelatedI've got an NEC LCD2010X monitor, and everytime I download the latest update from MS for either the NVIDA or Matrox Video cards I always find the drivers
don't work... why ? Latest case is with the NVIDA update - I can't go beyond 4bit 640x480.
I've formatted my hard drive and reloaded windows xp when i installed my game it tells me my pc don't have enough video memory but that same game use to work before can anyone tell me what is missing?
View 6 Replies View RelatedWhenever I open my video folder, it closes the explorer and says error. It happens with several .avi file. For Example, I have .avi file called A B C; the explorer closes whenever file A is in the folder. When it's out of the folder, the explorer works just fine without closing. I use Matroska pack codec, is this the problem? I remember on the error message says something about the codec is not compatible?
I did a clean install of Xp Home edition with SP2 and current updates and applications. There were no problems until I went to use the DVD playback feature in Nero Suite (Nero Showtime) the program had sound only, no video and after a few minutes it froze. The event log said ''Win XP error hanging App''. Why is this happening?? Is it another one of those Unknown error things with windows Xp?
View 10 Replies View RelatedI have Win XP and am trying to go from a DOS window to full screen. If I hit Alt-Enter, I get an error message saying it can't display that video mode.I downloaded a new driver for my video card, but same problem.
View 4 Replies View RelatedgeForce4 video ti-4200 apg 8x will not finish install of drivers says can not be fixed with xp trouble-shooter contact the manufacturer Code 10.
View 2 Replies View Relatedone day I turned on my pc and had no video, thought my on board went bad. Got a video card, didnt work. Decided to try the on board again, worked.Now it said there was a boot error at drive B. I didnt think I had a drive mapped to B.I ran a DOS boot disk and did a fdisk and it said there were no fixed drives, so I figured that it was a bad HD, got a new HD, changed it, still a problem. I have to start out with the DOS disk then I can pop in a Win2K boot disk and tryed to install. Cant find the setup or install file on Boot Disk 1. Wont boot from CD to install 2K.
View 11 Replies View Related