System Wont Allow For Accessing The Specified Device?
Aug 27, 2007
I deleted the I386 folder by mistake and had to repair the operating system...and it seems to be running fine. I had to reload a SP1 but I updated to service pack 2. But now I'm getting a "Windows cannot accessthe specified, device path or file. You may not have the appropriate permissions to access them" error. This happens when I get on IE, but it could be related to another program that runs automatically. Either way I can't do anything cause the error won't go away.
View 3 Replies
ADVERTISEMENT
Sep 22, 2006
I have a Windows XP Pro SP2 machine. I can connect to remote shares by IP address, but not by name. If I do a Start, Run, \computer it says "The network path was not found."There is no server on this particaular network it's all peer-to-peer, and I've enabled NetBIOS for good luck. Nothing. I cannot ping the other machines by name, either. All other machines in the network run fine.I've tried uninstalling and reinstalling components of Network Connections, and TCP/IP is the only protocol installed. I have confirmed that all of the computers are in the same subnet and same work group.There is no firewall software installed on the machine, apart from XP SP2, and I've disabled that.
View 14 Replies
View Related
Aug 11, 2010
We have 7 computers at our business where I want to place some files on one of the newer ones and let the others simply access them. However, the newest computer is running Win7 64-bit pro. Some of the other computers are just Win XP pro 32-bit. If I setup a "Work Network" on the Win 7 computer where the files are located, will I be able to find them on one of the Win XP computers? Hope I am being descriptive enough. Sorry if I'm not.
View 2 Replies
View Related
Jul 22, 2005
I have a Win2000 network and now have around 20 new XP Pro machines on it.Every user has at least one drive mapped to one of our servers to store files Every so often, for no reason that I have figured out, when trying to access a mapped drive it hangs up and you are asked for a username and password.This happens to me with my perminatly mapped drives and new ones I make on the fly. No username or password seems to work, and the easiest way to get it to work correctly is to reboot. This only happens with the XP machines.
View 6 Replies
View Related
Sep 18, 2006
I'm using Windows XP SP2 Home Edition and am trying to access the C:System Volume Information folder, but I keep getting an "Access is denied" message, even after following the below directions.
1. Click Start, click Run, type cmd, and then click OK.
2. Make sure that you are in the root folder of the partition for which you want to gain access to the System Volume Information folder. For example, to gain access the C:System Volume Information folder, make sure that you are in the root folder of drive C (at a "C:" prompt).
3. Type the following line, and then press ENTER:cacls "driveletter:System Volume Information" /E /G username:F. Make sure to type the quotation marks as indicated. This command adds the specified user to the folder with Full Control permissions.
4. Double-click the System Volume Information folder in the root folder to open it.
5. If you need to remove the permissions after troubleshooting, type the following line at a command prompt:
cacls "driveletter:System Volume Information" /E /R username..This command removes all permissions for the specified user. My problem may be with step #2, as I'm not sure what to do what it says in the last sentence. How do I get to a C: prompt?
View 14 Replies
View Related
Oct 15, 2005
My Desktop screen seems to be booting twice. I want to check and see if that is true and if any other system programs are booting twice during initial bootup. How do I access the Master Boot List, or System Startup Menu, whatever you may call the list the OS uses to Start the system up when it boots.
View 10 Replies
View Related
Mar 7, 2005
I have always used Windows to burn my cd's. Two days ago I got the message No CD or DVD device has been detected. I have Windows XP, Dell 4400, service pack 2, and while I can burn CD's with my other burner (Roxio), I really like Windows because of its features.
View 12 Replies
View Related
Oct 6, 2010
I can't hear sound from my Compaq system.It simply prints in audio devices No audio device found.
View 6 Replies
View Related
Apr 9, 2008
New (3 months) Dell Vostro 1000 with Windows XP Professional. Last few days when trying to shut down I'm getting an error message "Device 10 Notification" with the option to cancel or end task. Either choice leads me to the same issue that the program is not responding. Sometimes the computer goes ahead and shuts down anyway, other times I have to shut down without ending the program.
View 2 Replies
View Related
Sep 8, 2005
I have been getting BSOD for about 2 months now and always when i play a game especially bf2 and cod
after every BSOD it comes up device driver error but all drivers are fine,I have changed RAM,PSU and mobo after last time i was pulling my hair out and now its started doing it again after nearly 2 weeks
my system is as follows:
AMD A64 3200(winchester)skt 939
MSI neo 2 platinum NF3 ultra mobo
Giel pc 4000 ultra 2x512
Radeon X850 XT PE (agp)
View 14 Replies
View Related
Sep 8, 2009
Yesterday and all day today every time that I boot my system I get a pop up saying: Attempting Boot from USB Device Non-system disk or disk error replace and press any key when ready. I can log on my system by pressing F9 and the options that I have are
CD-ROM
USB Device
Hard Drive
the Hard Drive is the only one that lets me log on my system, the other choices only take me back to the same pop up message.
View 11 Replies
View Related
Sep 22, 2005
After formatting and installing W2k on a DEll 4100 PIII I'm getting the 'new device found' wizard and it says I have a PCI device not being found.. But all my devices are working (i.e. modem, sound card etc.) When I right click on properties in the device manager it says "PCI Bus 0, device 31, function 3" Anyone know how I can tell what device it's finding and can't locate a driver for?
View 2 Replies
View Related
Apr 17, 2006
When trying to install farstone virtual drive on a computer it reboots during the driver installation phase. After the reboot at the desktop windows says new hardware found and asks to install it. It's the offending driver, fcdabios. Windows installs it and says it was installed successfully. Then the computer spontaneously reboots again. It seems to start alright back at the desktop but again reboots after 2 minutes. The only cure is to do a restore from a norton ghost image. I sent a debug file to farstone but haven't received a reply yet.
View 2 Replies
View Related
Dec 31, 2008
stop device will not run in this operating system.... I get this message at the start up of my computer and will not continue to boot up until I clear it.
View 5 Replies
View Related
May 19, 2007
Not sure what has happened here. Toshiba Laptop M70 WinXP home SP2.Initial issue Unabel to read files off the DVD/CD Matshita DVD-Ram UJ-8415 When checking "System" Hardware there is a yellow caution ! beside it indicating an issue.Action: Uninstalled device and rebooted to let windows find appropriate driver.
System said found new device and identified it by name. But still the trouble indicator.Tried a couple of things to no avail.I have the toshiba - product recovery disk but I cannot access it due to the DVD error. so I attached my external DVD (usb) device Thinking I could load the disk in it and recover the drivers or what ever. My Freecom DVD now has a Trouble indicator on it as well. so it appears that the devices won't recognize.(tried to instal again - system recognizes it initially then show the trouble indicator again.
View 14 Replies
View Related
Jan 31, 2005
Reformatting a pc of mine to give to my sister. Her old computer had some info on its hard drive that she needed. It was too big to fit on a floppy and the CDROM had died so I took her old drive and hooked it up in the newer pc. The problem is: it shows up in System Devices but not in Windows Explorer. I tried right clicking on My Computer and then Manage to assign a drive letter to it, but it wont allow me. The option for assigning a drive letter isnt even available for that hard drive.
View 11 Replies
View Related
Jan 29, 2006
Whenever I try to open my system properties (right click on My Computer and click on properties, or go to my control panel and click on "system". nothing happens. I tried to fix it through hijackthis, and I also deleted all the virus' on my computer. I am able to open task manager, and all my other properties, I just can't seem to get to my task manager.
View 6 Replies
View Related
Nov 22, 2008
Insert any USB device to this computer, Computer keeps restarting and it wont stop doing that until I remove the usb device. I tried with all the usb ports on this computer and problem is the same. Even by hooking up a usb keyboard or mouse, computer wont get to the login screen. it keeps on restarting. It wont even go into 'safe mode'.Anyone have any clue whats going on and the solution to fix it?
View 2 Replies
View Related
Oct 1, 2005
I have an AMD 2.1 athlon, i try and re-install my C-MEDIA AC97 Audio Device, i dont have the CD and i dont know how to fix this
View 1 Replies
View Related
Aug 3, 2009
After our Dell Inspiron E1505 recently crashed , Dell talked us thru diagnostics and finally sent us a replacement(refurbished) Toshiba hard drive to install in our computer. After installing it, and reloading all of the software for Windows XP, MS Office Small Business 2003, drivers and utilities, using the discs that came with the computer, we have a "Found New Hardware" window that pops up - Wizard trying to install a "Base System Device" everytime we turn the computer on. It asks for a disc but none of my existing ones seem to be the correct one. I've given it permission to connect to the Internet to "find" the software but nothing works.Also, since the crash/re-install, our C drive only has 12.4 GBs of total disc space, and of that, only 1.2 is still free space. My D drive has about 37 GBs of disc space. Could these two problems be connected? The computer was running so slow and we would periodically get a message "low virtual memory". This weekend, I moved as many of our documents as possible to the D drive to try and free up space. It's a little better, but why do I have such a small amount of disc space?
View 5 Replies
View Related
Jul 15, 2005
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
View 1 Replies
View Related
Aug 4, 2010
I had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
View 6 Replies
View Related
May 12, 2010
Running Windows XP on Emachines ET1161-07. Installed all drivers that I could find, since EMachines does not represent XP. Tried Realtek audio and HD audio, tried Intel, didn't work. Tried NVidia, as it has an NVidia motherboard. Spent too much time on this computer. Can anyone lend a hand? I know it's got something to do with Audio, as there's no audio device detected in Sounds, under Control Panel.Customer has to have computer today.
View 10 Replies
View Related
Dec 17, 2005
I gotta a XP Home SP2 Machine was running fine then on boot up sound device not found. went to device mng and no items displayed. System restore had been didabled and Norton disabled as well. Done a spyware scan pull nout so did virus
View 3 Replies
View Related
Jul 21, 2005
I've been using a Buslink 40G disk-to-go for about 2 years and love it. Today I plugged it into the USB port and the drive did not display. I've searched forums half the night since this drive contains financial data that hasn't been backed up for a month (yes, bad practice, I know) and I need to get it working. I've uninstalled, reinstalled, updated drivers, removed and reinstalled drivers, rolled back drivers and tried everything short of bios changes I've seen recommended.
View 1 Replies
View Related
May 15, 2007
I have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
View 4 Replies
View Related
Aug 31, 2005
I had this problem last time when I fresh installed Windows XP Pro on my computer. I don't know the time, but it happens at least 30 days after I reinstall the OS and software. Today, my computer prompted me to install drivers for a PCI Input Device, but I haven't installed any new hardware for months. Basically, I haven't touched the inside of my computer for that long. So why is Device Manager prompting me to install this mystery device? Hardware ID shows that it is from vendor 1102, which is Creative, and I have an Audigy 1. Also, my FireWire port is Code 10, the device cannot start. So I'm thinking the mystery device is the same firewire port. But why show up as a separate device? I tried removing the devices and restarting the computer, but they return to haunt me again. The device properties for the PCI Input Device says PCI SLOT 7, AND I DONT HAVE A 7th slot! Can someone help me, please? Device manager shows my 1394 Net Adapter with a yellow exclamation, and it has code 10, device cannot start. There is an unknown device, the PCI Input Device, which doesn't allow me to install any drivers for it, yet it has the creative Vendor ID 1102. It shows itself as being PCI Slot 7.
View 3 Replies
View Related
Dec 8, 2004
I have a feeling that this is simply a case of some registry settings which need adding/modifying/deleting but exactly which ones and what values I do not know. No, I haven't tried re-installing XP.
View 3 Replies
View Related
Sep 19, 2006
The system seems to be very stable at this point in time. I run Norton Utilities and other maintenance sw as well as have a firewall/pest remover/anti-virus. Behavior - most things work fine on the USB ports, either the hub or direct connects. One digital camera will only work when direct connected(not thru the hub). I have a scanner that will only work on a 2003 Compaq Presario, but not on the whitebox on any port. Also, I have had two devices that won't work at all. I have noticed that the USB mass storage device icon doesn't seem to be present now when I attach a flash drive. This is recent behavior and doesn't predate every USB problem.
View 4 Replies
View Related
May 6, 2008
I had a hard drive fail (can't boot up on it) so I installed windows on a second hard drive. I still want to be able to recover the files on the first drive, so is there a way I can just access the drive with both HDs attached to the computer?
View 3 Replies
View Related
Dec 27, 2005
My laptop i can access regular websites but I am not able to access secured websites or my aim account. First off I checked the computer for viruses and spyware and it seems to be fine and also i tried to repair IE and even reset all the defaults. We did all these little configurations that i found on google but it seems not to be working.I also tried to download firefox and wont load up at all.
View 7 Replies
View Related
