System Restore - Install Firewall No Start Up
Aug 24, 2005
download from msn and in 2 days 8 viruis and many registery problems have got rid of all by running spydoctor . registy meachine ,avg .ntl netguard. the main viruis was backdoor jcb but now my windows firewall turns off after every restart and so dose system restore i have tryed to install a new firewall spygate but this will not start up after i download it i did put in a new cd-rw drive a couple of weeks ago but thats been fine
View 1 Replies
ADVERTISEMENT
Aug 18, 2008
I recently installed Comodo Firewall and once again, it was too much for me to handle, so I uninstalled it and went back to Windows Firewall until I can find something else. However, as most people experience, it is still listed as my running firewall in the security center. I googled the problem and I have tried everything that I have found to get rid of it and it will not go away! I followed the instructions on the Comodo page and when it comes to deleting the repository file, it won't allow me to. I hit delete and it comes up that a file is still in use. I tried again and again, went under safe mode, and nothing. I tried to run the Command line....it tells me the repository file is not empty and Command will not let me proceed any further.
I tried System Restore, which solved the firewall problem but brought on antivirus problems (I have the Avira free edition). The AV guard will not work. I click "Antivir Guard Enable"....nothing. The definitions remain at the day I restored back to and when I try to update, it says my program is up to date. I go to the Service program under Administrative tools to start it, same problem. I have restored back a couple times and have never had this problem. So I ended up undoing both system restores and am back to the firewall problem. I can't get rid of it no matter what I do.
View 7 Replies
View Related
Nov 4, 2006
My computer had a turn yesterday and kept giving me the blue screen error on start-up, so using my windows disk I managed to run chkdsk. So I can get on now, but certain things won't run, like Media Centre, Firefox has forgotten my settings and also my iriver doesn't get acknowledged when I plug it into a USB port.So I am trying to run System restore to go back a couple of days.I can get into restore, and go through everything up to the point where you click 'next' in order to restore it.I click on next but nothing happens, it just stays there.
View 3 Replies
View Related
May 13, 2006
I have a Toshiba sat pro 6000 running XP pro which was pre installed, so no discs.Last night I downloaded an upgrade of kapersky and when it asked me to reboot laptop the following happened.A black screen appeared asking if I wanted to start in safe mode and a list of other options, I chose safe mode and the screen filled up with a long list about multi disks partition , windows driver etc.So I closed down and then chose start windows normally from the black page and it then progressed on to scanning the disc which is does. It reports there are no problems and then opens up the black page again, and again and again.I have pressed F8 and I chose disable auto start up and a blue screen came up telling me of a possible problem and to use recovery cd which I don't have. Can anyone advise on how I can start windows so that I can eliminate kapersky or do a system restore.
View 14 Replies
View Related
Jul 31, 2010
Recently my OS XP Pro has been acting a little strange, when I start it up a installer has been popping up trying to install a fax, which I do cancel before it can install. Also I tried using System Restore and the restore process starts and gets about 1/3 of the way on the progress bar and restarts my PC and says “your system can not be restored”. I have went to Microsoft knowledge base of known problems w/SR and have tried all the different scenarios and get the same result each time. I have a feeling that I have been hijacked. I am including scans from MalewareBytes and Hijack This.
View 14 Replies
View Related
Aug 26, 2005
I can still use system restore; but my problem is I can't seem to locate system restore on the start menu, I know that it used to be there. Is there any way to put the icon back on the start menu? Running Window XP Home Edition.
View 7 Replies
View Related
Apr 21, 2006
I keep getting this message: "wmi has encountered a problem and needs to close." I've tried everything I can think of to get rid of it including:1. System Restore to a previous point2. Stopped Windows Management Instrumentation service and set it to MANUAL star 3. Stopped Windows Performance Adapter service and set it to MANUAL start4. Searched registry for entries that could/should be deleted (didn't find the ones I expected to see.)5. General cleanups including Registry Mechanic detect and repair. Norton Antivirus scan. Microsoft AntiSpyware scan / repair. Spybot Search and destroy scan / fix. Spyware Blaster update and enable all protection.
View 3 Replies
View Related
Oct 4, 2006
Probably once a day my PC will shut off and then restart. I really need this PC to be reliable and stay up.I have tried a memory test to see if it was that and it came up ok. I was also told it could be to do with drivers for hardware.If anyone could give me some advice I would REALLY appreciate it.
View 13 Replies
View Related
Dec 8, 2008
im having this two problems.search option in start menu is not functioning as well as my system restore.i wasnt able to fully explain in words so ive decided
to attach it.
View 3 Replies
View Related
May 11, 2007
I am trying to run a system restore on one of my computers. I was trying to install a LinkSys wireless router on it. The router would start up fine, but after about 5 or 10 minutes, it would stop working and I would have no internet connection. I went and got a Dlink router, and thought I would do a system restore to before I attempted to put on the LinkSys router. The system restore has been running for more than an hour. The progress bar has gone about 80% and it seems nothing else is happening. I am fearful of turning off the machine in the middle of a restore.
View 3 Replies
View Related
Feb 17, 2007
I have a Compaq Presario Media Center SR2034NX Desktop PC with XP installed from the factory. I needed to do a system recovery that should have put things back to the place they were when I purchased it.10-21-07. It restored things but not back to the original install.Can I do system restore without useing the programs system restore feature? If so, I could restore to an earlier date when things were ok.
View 14 Replies
View Related
Apr 28, 2005
If i was to install service pack 2, via the disc i have, and i dont like what it has done to my computer, will i be able to refer back to a System Restore Point i created before installation?
View 3 Replies
View Related
Mar 23, 2007
I have been trying to solve this for quite some time now. I go into the control panel, firewall settings. On the first tab, you get to choose your firewall setting (on/on with exceptions/Off). All of my options are greyed out and I have no options to start the firewall.Clean computer (just spent the last 3 days debugging it). I am sure that it has something to do with what was downloaded by my son but even after cleaning up the computer to get rid of spyware, malware, trojans, backdoors, viruses, etc I am left with the same result.
View 11 Replies
View Related
Dec 9, 2004
my housemates computer has me completely stumped, we have formatted his HDD several times and re-installed XP on it several times, yet every second time the computer will freeze just after its started up, not freeze really but will lose the mouse and keyboard
View 2 Replies
View Related
Oct 4, 2010
I have no idea how to install firewall. Alpha shield x2 hardware firewall
View 1 Replies
View Related
Sep 2, 2005
I have a Compaq Proliant 8000 here that had Red Hat Linux pre-installed and in working order. My company then decided that it wanted Small Business Server 2003 installing, so after using Compaq Smartstart to format and re arrange the disk arrays, which is no problem at all system formatted then a raid 5 disk array set-up which smart start detects and reads correctly However, now that is done the system will NOT install SBS 2003 or any other operating system at all, at the point of the install where the disk reads "Windows Set-up" the system just stops and freezes, this happens with other disks and different O/S discs.
View 3 Replies
View Related
Feb 8, 2006
I'm trying to configure the Windows Firewall after recently installing SP2, but it's set to 'Off' and the options to turn it on are greyed out. A message at the top says "For your security, some settings are controlled by Group Policy". After googling for some answers, I came across a couple of solutions, some of which involve reg editing, and others using the gpedit.msc tool. Problem is, I'm using XP Home, on which the reg keys don't exist and the gpedit tool doesn't either. SOMETHING must be blocking these things. So how can I disable this Group Policy thing, even though XP Home isn't meant to use it, doesnt have it and I never changed any settings like that in the first place?
I found I can turn the firewall on/off by changing the key HKEY_LOCAL_MACHINESOFTWAREPoliciesMicrosoftWin dowsFirewallStandardProfile EnableFirewall=0/1. and in the Contrl Panel util it changes it's status, but it's still greyed-out with that Group Policy stuff. This is my first post after searching hi and low for help. Thanks for any you can provide. I understand windows, ha ha, but am not a nuts and bolts insider with registry or editers. Just want firewall to work. I upgraded my laptop with noproblem with sp2......
View 3 Replies
View Related
Jun 25, 2006
I think I've finally stopped procrastinating and I'm ready to risk installing windows xp home edition SP2. But before I do, I want to be sure I do all the "prepare your computer" things I'm supposed to do. I did a complete hard drive backup. I'm running Norton System Works 2006, which includes Norton Anti-Virus. I thought I also had Norton Internet Security but apparently I do not. So I don't know what if anything I'm running for a firewall!!! [big problem perhaps, but a different thread!]
One message on this forum says "disable anti-virus and firewall..." In my case, how should I do that? I've disabled NAV "auto-protect" using the icon in my system tray. Is that enough, for NAV? I will disconnect entirely from the internet before installing SP2. But once I do that, do I still have to disable a firewall?
View 2 Replies
View Related
Aug 25, 2008
If you have Comodo Firewall Pro v3.0.25.378 on your system the install of sp3 may hang at 'Running processes before install'. This is due to the May 30, 2008 update of Comodo and the 'Guard32.dll'.To install sp3 either uninstall Comodo or an easier method is to disable 'Defence+', open the system32 folder and look for the 'Guard32.dll'. Right click on the 'Guard32.dll' and rename to 'Guard32.dll5' (or whatever you want to rename it to).I spent hours trying to figure out why the sp3 install hung at 'Running processes before install' (if you open Task Manager while the install is hung you will see 'fixcss.exe' and 'nv4prep.exe' using 100% cpu). Finally boiled the problem down to the 'Guard32.dll' which is Comodo's 'Defence+'.It won't do any good just to completely shutdown Comodo and stop the service. Apparently the Guard32.dll remains in memory and needs to be disabled by renaming it.After installing sp3 go back and rename the Guard32.dll to it's original.I have contacted Comodo about this issue and they seem to be working on it.
View 3 Replies
View Related
May 9, 2010
i need to install to install Microsoft firewall client but when i install i get following msg "the windows installer service could not be accessed. this can occur if your running windows in safe mode. or if the windows installer is not correctly installed. contact your support personnel for assistance"
View 6 Replies
View Related
Dec 16, 2006
Reading various posts, I see mention of activating Win XP firewall immediately after reformatting and installing XP home. What is wrong with unplugging the modem, reformatting and installing everything including SP2, AVG AV, and Kerio personal firewall, THEN going back online and getting updates? Also, what is the value of slipstreaming SP2 instead of just installing XP then installing SP2 before going back online for all win xp updates?
View 3 Replies
View Related
Jul 6, 2005
If someone downloads and runs a trojan and then uses system restore to back
to a system restore point prior to running the virus, is that computer still
infected?Nocturnal http://www.spywaretalk.org
View 1 Replies
View Related
Jun 10, 2010
a virus entered my pc and blocked my firewallics service i tried everything i found online from starting my firewall service in services.smc to using the netsh commands and rundll32 setupapi,InstallHinfSection Ndi-Steelhead 132 %windir%infetrass.inf command but it did not change anything. i fully scanned 3 times each with avira,spybot,malawarebyte and all viruses were deleted but i still have this problem.
View 26 Replies
View Related
Feb 9, 2008
I restarted my computer after installing an update to my firewall program. I get the "windows could not start because the following file is missing or corrupt: WindowsSystem32Hal.dll" I tried to do system restore first (F10) and it tried to start windows to start the system restore program I suppose and so of course the same error message came up. After retrying a few times, I tried the other option in system recovery (f10) and it said user data would be preserved but I may need to reinstall programs, so I thought that'd be fine. I let it do it's thing and came back later when it was done and it looked like the first time I started my computer ever where it has that cheesy music and asks you to name your computer, etc. So I'm finally in Windows again (XP Media Edition 2002 SP2) and the first thing I check is my documents folder and all my documents are gone! I checked the properties of the C: drive and it shows that I've used 224GB space, but I can't find my files anywhere. I've looked in all profiles in documents and settings. It seems like the files should be somewhere since the hard drive shows that I have that used space.
View 14 Replies
View Related
Aug 19, 2005
I have a DSL connection, windows says the firewall is on but it is not. I keep getting this error message whenever I try to install it. "Windows Firewall settings can't be displayed because the associated service isn't running, do you want to start the Windows Firewall/Internet Connect Sharing (ICS) Service?". I click on yes. Then I get "Windows cannot start the ICS service. I recently installed a 30 McAfee free trial and it worked fine.
View 1 Replies
View Related
Mar 10, 2005
Installed Norton Internet Security 2005 and now, whenever I try and do a system restore it says "System restore encountered a problem and has to close". It does this all the time, even in safe mode. Symantec has mentioned that I should turn off NIS2005 and try system restore. If it then works it is a Microsoft issue. I have been onto the Microsoft websites and they do not mention how to repair or reinstall system restore
View 3 Replies
View Related
Jul 29, 2005
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
View 4 Replies
View Related
Dec 13, 2004
S/Restore system when operated comes up with "Cannot restore your system to an earlier date" Have checked for all spyware and viruses (Nil) Have tried disabling the system and also making new restore dates to no avail. Would kindly request any posssible solutions to the above also any other programme I could install to carry out the same or similiar functions to "Systems Restore
View 7 Replies
View Related
Sep 15, 2006
I was messing around with CCleaner and deleted something to do with an old version of McAfee (which isn't even on my computer anymore) from the registry. Yes, it was stupid to mess with the registry I guess because I failed to make the backup and now my computer won't boot. I get the blue screen that says there was an error 0x0000008e, or something like that.
I have tried using F8 and choosing the last known good configuration but it doesn't work. Also, I can boot into safe mode and I tried running a system restore but after it finished and I rebooted, it said that I couldn't restore from that point.I haven't really tried another restore because I am a little afraid to do anything. I don't want to risk losing access in safe mode because I need to be able to back up some of my files if in case I have to do a reformat.
View 6 Replies
View Related
Feb 13, 2005
I am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
View 7 Replies
View Related
Apr 8, 2005
I'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
View 13 Replies
View Related
