OS Unstable - Install Fax - System Restore
Jul 31, 2010
Recently my OS XP Pro has been acting a little strange, when I start it up a installer has been popping up trying to install a fax, which I do cancel before it can install. Also I tried using System Restore and the restore process starts and gets about 1/3 of the way on the progress bar and restarts my PC and says “your system can not be restored”. I have went to Microsoft knowledge base of known problems w/SR and have tried all the different scenarios and get the same result each time. I have a feeling that I have been hijacked. I am including scans from MalewareBytes and Hijack This.
View 14 Replies
ADVERTISEMENT
Mar 31, 2008
i've recently connected to the internet via broadband, so purchased Norton Internet Security 2008. When trying to install that I was informed I needed to update Windows to XP Service pack 2. (the pc is at least 5 years old, purchased by my wife before we married). I tried this, but eventually a message came up - "Did not install - system unstable". So I did what it said and Uninstalled. But now I'd be very grateful for any advice, ie what does this mean, how can I get the system to be "stable" and thefore install SP2 and therefore Norton Security.In the meantime I'm worried about going on line ( I am sending this from a library) due to being exposed to viruses, spyware etc. A message has already come up about having spyware (but I think this was removed after downloading anti-spyware from yahoo).
View 7 Replies
View Related
Aug 29, 2005
I am getting random crashes, lock-ups, reboots, you name it. I have had to type this message on wordpad rather than in IE because it will freeze up within seconds. (This site is worse than others for some reason). I recently done a fresh install on my machine so there is very little on it. I have a 160gb sata drive and on 100gb of it I have windows xp sp2 installed and the remaining I have xp sp1 installed so I can switch between the two.
View 1 Replies
View Related
Jul 26, 2010
I have three querries,
(1) my desktop configuration is ASUS motherboard P5KPL AM/PS, with pentium (R) dual core CPU 2.7 GHz, 320 GB hard disk, 1 GB DDR2 RAM and NVIDIA getForce 8400 GS. My question is when i tried putting a single 2 GB RAM, it was showing error and the system became unstable. What could be the reason?
View 2 Replies
View Related
Sep 1, 2005
Hello there after lots of previous problem with my pc. I have formated my PC and though running ok whenever i access Security Centre or the Control Panel neither will respond. Please help. H Here is the Hijack this log file....
Logfile of HijackThis v1.99.1
Scan saved at 14:56:23, on 01/09/2005
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v6.00 SP2 (6.00.2900.2180)
Running processes:
C:WINDOWSSystem32smss.exe
C:WINDOWSsystem32winlogon.exe
C:WINDOWSsystem32services.exe
C:WINDOWSsystem32lsass.exe
C:WINDOWSsystem32svchost.exe
C:WINDOWSSystem32svchost.exe
C:WINDOWSsystem32spoolsv.exe
C:PROGRA~1GrisoftAVGFRE~1avgamsvr.exe
C:PROGRA~1GrisoftAVGFRE~1avgupsvc.exe
C:WINDOWSsystem32
vsvc32.exe
C:WINDOWSsystem32slserv.exe
C:WINDOWSzHotkey.exe
C:Program FilesCyberLinkPowerDVDPDVDServ.exe
C:WINDOWSSOUNDMAN.EXE
C:Program FilesDigital Media Readershwiconem.exe
C:WINDOWSALCWZRD.EXE
C:PROGRA~1GrisoftAVGFRE~1avgcc.exe
C:PROGRA~1GrisoftAVGFRE~1avgemc.exe
C:WINDOWSsystem32
undll32.exe
C:WINDOWSexplorer.exe
C:Program FilesInternet Exploreriexplore.exe
C:DOCUME~1PAULSM~1LOCALS~1TempTemporary Directory 1 for hijackthis[1].zipHijackThis.exe
R0 - HKCUSoftwareMicrosoftInternet ExplorerMain,Start Page = http://news.bbc.co.uk/
R1 - HKLMSoftwareMicrosoftInternet ExplorerMain,Default_Page_URL = http://www.msn.co.uk
R0 - HKCUSoftwareMicrosoftInternet ExplorerMain,Local Page =
O2 - BHO: AcroIEHlprObj Class - {06849E9F-C8D7-4D59-B87D-784B7D6BE0B3} - C:Program FilesAdobeAcrobat 6.0ReaderActiveXAcroIEHelper.dll
O2 - BHO: (no name) - {549B5CA7-4A86-11D7-A4DF-000874180BB3} - (no file)
O2 - BHO: (no name) - {FDD3B846-8D59-4ffb-8758-209B6AD74ACC} - (no file)
O4 - HKLM..Run: [IgfxTray] C:WINDOWSsystem32igfxtray.exe
O4 - HKLM..Run: [High Definition Audio Property Page Shortcut] HDAudPropShortcut.exe
O4 - HKLM..Run: [CHotkey] zHotkey.exe
O4 - HKLM..Run: [ShowWnd] ShowWnd.exe
O4 - HKLM..Run: [RemoteControl] "C:Program FilesCyberLinkPowerDVDPDVDServ.exe"
O4 - HKLM..Run: [NeroFilterCheck] C:WINDOWSsystem32NeroCheck.exe
O4 - HKLM..Run: [SoundMan] SOUNDMAN.EXE
O4 - HKLM..Run: [SunKistEM] C:Program FilesDigital Media Readershwiconem.exe
O4 - HKLM..Run: [AlcWzrd] ALCWZRD.EXE
O4 - HKLM..Run: [Alcmtr] ALCMTR.EXE
O4 - HKLM..Run: [AVG7_CC] C:PROGRA~1GrisoftAVGFRE~1avgcc.exe /STARTUP
O4 - HKLM..Run: [AVG7_EMC] C:PROGRA~1GrisoftAVGFRE~1avgemc.exe
O4 - HKLM..Run: [BluetoothAuthenticationAgent] rundll32.exe bthprops.cpl,,BluetoothAuthenticationAgent
O4 - HKLM..Run: [NvCplDaemon] RUNDLL32.EXE C:WINDOWSsystem32NvCpl.dll,NvStartup
O4 - HKLM..Run: [nwiz] nwiz.exe /install
O9 - Extra button: (no name) - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:Program FilesJavaj2re1.4.2in
pjpi142.dll
O9 - Extra 'Tools' menuitem: Sun Java Console - {08B0E5C0-4FCB-11CF-AAA5-00401C608501} - C:Program FilesJavaj2re1.4.2in
pjpi142.dll
O9 - Extra button: Real.com - {CD67F990-D8E9-11d2-98FE-00C0F0318AFE} - C:WINDOWSsystem32Shdocvw.dll
O9 - Extra button: Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O9 - Extra 'Tools' menuitem: Windows Messenger - {FB5F1910-F110-11d2-BB9E-00C04F795683} - C:Program FilesMessengermsmsgs.exe
O14 - IERESET.INF: START_PAGE_URL=http://www.msn.co.uk
O16 - DPF: {131EB16C-BD58-443F-8151-6DFBB0DA1778} (Anark Client 3.0 ActiveX Control) - http://install.anark.com/client/vers...n/AMClient.cab
O16 - DPF: {17492023-C23A-453E-A040-C7C580BBF700} (Windows Genuine Advantage Validation Tool) - http://go.microsoft.com/fwlink/?linkid=39204
O20 - Winlogon Notify: igfxcui - C:WINDOWSSYSTEM32igfxsrvc.dll
O23 - Service: AVG7 Alert Manager Server (Avg7Alrt) - GRISOFT, s.r.o. - C:PROGRA~1GrisoftAVGFRE~1avgamsvr.exe
O23 - Service: AVG7 Update Service (Avg7UpdSvc) - GRISOFT, s.r.o. - C:PROGRA~1GrisoftAVGFRE~1avgupsvc.exe
O23 - Service: Macromedia Licensing Service - Unknown owner - C:Program FilesCommon FilesMacromedia SharedServiceMacromedia Licensing.exe
O23 - Service: NVIDIA Display Driver Service (NVSvc) - NVIDIA Corporation - C:WINDOWSsystem32
vsvc32.exe
O23 - Service: SmartLinkService (SLService) - - C:WINDOWSSYSTEM32slserv.exe
View 14 Replies
View Related
Oct 14, 2006
I've had this ax8 board for some time. Previously, I'd been using an av8. Here's a run down of what I've experienced. With all the default devices enabled in bios, random irq/driver irq not less than or equal BSOD's. Disabled on board FDC, still bsods. Disabled onboard LAN, still bsods. Disabled IDE controllers, still BSOD's. I've tried a pcie and pci card, still bsods. Tried SATA 3&4, still BSODs. I replaced my USB keyboard/mouse with an old ps/2 keyboard and mouse, unplugged my usb headset, and it hasn't crashed since.
View 4 Replies
View Related
Aug 16, 2005
os keeps getting error messages such as system is unstable and it is crashing on a regular basis when he goes on the internet. he doesnt update his windows on a regular basis and he does not have very good antivirus protection, so i have unplugged his modem for the time being to stop him getting into more trouble. he has reformatted his drive twice in the last 2 weeks so i want to install avg antivirus, spywareblaster, spybot, and the latest version of ad-aware(as he only has an older version) before he plugs his modem back in, then update every thing, and run scans using the programs listed above. am i doing the right thing? and how do i go about wiping his hard drive so i can re-install his windows.
View 3 Replies
View Related
Aug 24, 2005
download from msn and in 2 days 8 viruis and many registery problems have got rid of all by running spydoctor . registy meachine ,avg .ntl netguard. the main viruis was backdoor jcb but now my windows firewall turns off after every restart and so dose system restore i have tryed to install a new firewall spygate but this will not start up after i download it i did put in a new cd-rw drive a couple of weeks ago but thats been fine
View 1 Replies
View Related
May 11, 2007
I am trying to run a system restore on one of my computers. I was trying to install a LinkSys wireless router on it. The router would start up fine, but after about 5 or 10 minutes, it would stop working and I would have no internet connection. I went and got a Dlink router, and thought I would do a system restore to before I attempted to put on the LinkSys router. The system restore has been running for more than an hour. The progress bar has gone about 80% and it seems nothing else is happening. I am fearful of turning off the machine in the middle of a restore.
View 3 Replies
View Related
Feb 17, 2007
I have a Compaq Presario Media Center SR2034NX Desktop PC with XP installed from the factory. I needed to do a system recovery that should have put things back to the place they were when I purchased it.10-21-07. It restored things but not back to the original install.Can I do system restore without useing the programs system restore feature? If so, I could restore to an earlier date when things were ok.
View 14 Replies
View Related
Apr 28, 2005
If i was to install service pack 2, via the disc i have, and i dont like what it has done to my computer, will i be able to refer back to a System Restore Point i created before installation?
View 3 Replies
View Related
Jul 6, 2005
If someone downloads and runs a trojan and then uses system restore to back
to a system restore point prior to running the virus, is that computer still
infected?Nocturnal http://www.spywaretalk.org
View 1 Replies
View Related
Mar 10, 2005
Installed Norton Internet Security 2005 and now, whenever I try and do a system restore it says "System restore encountered a problem and has to close". It does this all the time, even in safe mode. Symantec has mentioned that I should turn off NIS2005 and try system restore. If it then works it is a Microsoft issue. I have been onto the Microsoft websites and they do not mention how to repair or reinstall system restore
View 3 Replies
View Related
Jul 29, 2005
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
View 4 Replies
View Related
Dec 13, 2004
S/Restore system when operated comes up with "Cannot restore your system to an earlier date" Have checked for all spyware and viruses (Nil) Have tried disabling the system and also making new restore dates to no avail. Would kindly request any posssible solutions to the above also any other programme I could install to carry out the same or similiar functions to "Systems Restore
View 7 Replies
View Related
Sep 15, 2006
I was messing around with CCleaner and deleted something to do with an old version of McAfee (which isn't even on my computer anymore) from the registry. Yes, it was stupid to mess with the registry I guess because I failed to make the backup and now my computer won't boot. I get the blue screen that says there was an error 0x0000008e, or something like that.
I have tried using F8 and choosing the last known good configuration but it doesn't work. Also, I can boot into safe mode and I tried running a system restore but after it finished and I rebooted, it said that I couldn't restore from that point.I haven't really tried another restore because I am a little afraid to do anything. I don't want to risk losing access in safe mode because I need to be able to back up some of my files if in case I have to do a reformat.
View 6 Replies
View Related
Nov 4, 2006
My computer had a turn yesterday and kept giving me the blue screen error on start-up, so using my windows disk I managed to run chkdsk. So I can get on now, but certain things won't run, like Media Centre, Firefox has forgotten my settings and also my iriver doesn't get acknowledged when I plug it into a USB port.So I am trying to run System restore to go back a couple of days.I can get into restore, and go through everything up to the point where you click 'next' in order to restore it.I click on next but nothing happens, it just stays there.
View 3 Replies
View Related
Feb 13, 2005
I am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
View 7 Replies
View Related
Apr 8, 2005
I'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
View 13 Replies
View Related
Apr 26, 2006
i want to restore my laptop. had restore turned on until about 3 weeks ago shut it off. question:if you shut off restore does it still keep the last restore points? and is there a way to restore in safe mode (cant boot in reg mode) if restore is shut of. when i try and turn on sys restore in safe mode it say "i cant"
View 1 Replies
View Related
Nov 10, 2007
My comp has been experiencing several problems and is running poorly. I bought an external HD, completely backed up everything important and was about to run a system restore as I had created a manual restore point following the resolution of previous problems. The link to the thread is found below. However, when I use the system restore wizard, I can only select November 8th, 9th, and 10th and today is the 10th. I created the manual restore point back in March 2006. I cannot change the month and I have no idea where to find manual points.
View 6 Replies
View Related
Nov 26, 2006
My system restore is enabled but no matter what bold restoration point I choose I am told system can't be restored to that date, choose another restoration point. I do, the system shuts down and restarts and I get the same message.
View 7 Replies
View Related
Jul 25, 2005
How do I do a restore to factory settings? The only thing I have been able to find is a system restore to an earlier date, could someone help me please?
View 6 Replies
View Related
Dec 24, 2005
I'm running Windows Xp porfessional. I was wondering if its possible to have system restore create a restore piont once a day automaticlly?
View 6 Replies
View Related
Nov 20, 2006
I have Windows XP. I create restore points, but when i try to use the system restore, it says; Restore failed, could not resstore computer. I choose a different date and get the same thing, Can't restore. Does anyone know why this happens?
View 12 Replies
View Related
Apr 13, 2010
I am running XP Pro with IE8, there is a problem when I attempt to copy and paste, I can put the pointer on where I want to start highlighting and it will not follow the movement of the mouse when attempting to highlight. You can put the pointer on a sentence and hold the mouse while sliding and it will not highlight, or it may start highlighting somewhere in the middle or maybe not at all. I have tried from bottom up and top down, it makes no difference, this is driving me crazy because I use the copy and paste feature quite often. I've never had this happen before, something appears to be conflicting; but I've been running the same programs for a long period of time and never seen this before.
View 13 Replies
View Related
Sep 4, 2007
i have noticed when you Ctrl-Alt-Del my cpu usage goes from 10% to 90% every 30 secs or so and will not stop a steady line up and down no matter what i am doing i could even be setting idle and still persist
View 4 Replies
View Related
Aug 20, 2005
My norton anti-virus said that some files were mssing. It said that if I restored my computer to an earlier date that this should correct the problem. My computer has restore dates so I picked one from the previous day. When my computer re-boted it said that it was not able to restore to an earlier date because some files maybe corrupted. Said to restate the computer and trying restoring again. I did but had same results. Any restore date I pick, it says it is unable to restore.
View 8 Replies
View Related
May 22, 2006
I have Windows XP. WHen I try to use "system restore", I keet getting a message that say that I cannot restore to the restore point I chose. I followed the instructions, and only choose restore points that are bolded.
View 7 Replies
View Related
Nov 12, 2007
i've been trying to do a system restore (manually, it's not like the system is doing it on his own), but in the end when it's supposed to show the message of having finished the process, it always says that the system couldn't be restored. I've tryied several restoration points, but no matter how different or how far it just won't do.
View 13 Replies
View Related
Dec 20, 2007
I have a Dell 2400 with Windows XP. I have used "System Restore" several times in the past with good results. The last several days I have been trying to use same and go back at least a month, but when I click on the arrow to to the left side of the restore box to go to the previous month it will not do same, nor will it go to the next month when I click on the right side arrow. I need to restore and see if it will correct a problem I am having with Links 2003
View 3 Replies
View Related
