My comp has been experiencing several problems and is running poorly. I bought an external HD, completely backed up everything important and was about to run a system restore as I had created a manual restore point following the resolution of previous problems. The link to the thread is found below. However, when I use the system restore wizard, I can only select November 8th, 9th, and 10th and today is the 10th. I created the manual restore point back in March 2006. I cannot change the month and I have no idea where to find manual points.
I recently downloaded some drivers as I was trying to install a new printer who's software would'nt load. This did'nt solve the problem. I decided to get a printer that I had had before, Brother DCP-110C as I knew this had worked well. I tried to install yesterday (28th July) but could'nt and my PC keeps switching itself off near the end of the installation. I then thought I would use System restore to go back to a happier time when I had the first Brother printer. previous saved point wont let me to restore
I am unable to acess any of my or XP's restore points. When I went to restore to an earlier date. All appeared to be going as it should. However, when I got to my profile a message window came up that said unable to restore to (chosen date/time) etc. I chose 3 other restore points over the last month, thinking it might be some recent problem, still a no go. Any help would be greatly appreciated? Is there a utility to use to check and see if there is something corrupted?
I'm trying to do a system restore without success. It goes through the motions but after it restarts always say "cannot use restore point, no changes have been made to your system". I'm trying to correct a font setting change that happened without my knowledge.
My system restore is enabled but no matter what bold restoration point I choose I am told system can't be restored to that date, choose another restoration point. I do, the system shuts down and restarts and I get the same message.
I have Windows XP. I create restore points, but when i try to use the system restore, it says; Restore failed, could not resstore computer. I choose a different date and get the same thing, Can't restore. Does anyone know why this happens?
My system restore is no longer creating any restore points, I have to do it manually. About 3 weeks ago I had a virus that I believe I got rid of using HiJackThis. That virus shut off my system restore so that it could not be used and at that time I lost all my restore points. Now my computer seems fine except for the system is not creating any NEW restore points.
The System Restore service has been suspended because there is not enough disk space available on the drive \?Volume{e01463d0-1a8a-11d6-affd-806d6172696f}. System Restore will automatically resume service once at least 200MB of free disk space is available on the system drive."
I just reformatted by Toshiba laptop computer to take it back to original state. I have installed minimum programs at this point. Before I do any adding I go in and set a system restore point.When I went in to do this the first time I found that there was a whole list of system restore points for a program install. It is not a program I installed on my computer this time around, although it was installed previous to my reformatting.System restore shows this program installed every 10-15 minutes ad there's a list of at least 30 or 40 restore points each day.
Was having a problem with the computer, doing weird things so I thought that I might go back and do a restore from an earlier point to see if it solved the problem. Anyway, went to earlier point, restored sort of, after it did everything, it told me it could not restore to that point and that nothing was done. I went to another restore point further back, same message, was not installed at the restore point, current settings are intact. Did this 2 more times, same results. I have made restore points along with the ones the systme makes. None of them works.
I keep getting this message: "wmi has encountered a problem and needs to close." I've tried everything I can think of to get rid of it including:1. System Restore to a previous point2. Stopped Windows Management Instrumentation service and set it to MANUAL star 3. Stopped Windows Performance Adapter service and set it to MANUAL start4. Searched registry for entries that could/should be deleted (didn't find the ones I expected to see.)5. General cleanups including Registry Mechanic detect and repair. Norton Antivirus scan. Microsoft AntiSpyware scan / repair. Spybot Search and destroy scan / fix. Spyware Blaster update and enable all protection.
Probably once a day my PC will shut off and then restart. I really need this PC to be reliable and stay up.I have tried a memory test to see if it was that and it came up ok. I was also told it could be to do with drivers for hardware.If anyone could give me some advice I would REALLY appreciate it.
When I try to restore my computer no restore points are saved I have the system restore set to it's maximum capacity, there is plenty of space. I tried to create my own restore points and received message system restore is not able to create restore point please restart the computer and then run system restore again. I did and got same message again. Can someone please tell me how to rectify this problem.Was having trouble with screen saver which refused to start but have now disabled ehtray and screen saver is now working again.
My XP Home System Restore function works when I manually create a restore point, however, the following day (on the calendar) that point is no longer available. I can create several restore points and all are gone the next day. It used to work fine and there would be weeks of restore points. Occasionally I would turn the function off and remove all past points and then turn it back on and it would create a system check point and the next day yet another check point, etc. Now it does not retain even a single point for more than a day.
I have lost all my system Restore points, How to restore these restore points back? More than Fixing, Why it did happened? What should I to prevent this happening again? I Haven't turned off system restore points niether disk space setttings, it's remain Max 12%. I do have more than enough disk space.
For what ever reason my computer won't create restore points anymore. I've tried a couple of things suggested like disabling restore points then enabling it, letting it just sit idle and I've checked that I have enough room ( there's lots of room ). The last time I used restore was about 9 to 12 months ago and it was working fine then. So I'm just looking for some ideas as to what else I might try. My o/s is XP Home.
I had a problem with my computer running slowly but I solved it.I was told to turn off restore points,then turn them back on.Tried that but I get the following message.System restore encountered an error trying to enable/disable one or more drives.Please restart your machine and try again.
I have XP.I've noticed that my System restore has created restore points almost on a daily basis. Is this normal?I seem to recall not too long ago restore points at best were like maybe 4 or 5 in a month.I have close to 200GB in 2 hard drives, and 1K of memory if that helps.I did notice that the slider for my System Restore memory is at the max of 12%. I assume thats normal?
Computer is not shutting down When I click Shutdown? Also, I lost all my System restore Points and cannot use that Option. I don't know how I lost all the restore points. Need help to restore that too.
What can cause the restore points on the XP OS to become corrupted. For the second time in 6 months I have had to do a complete restore of my system as none of the restore points would work. I have not set up any of the points myself as the system seems to do it every day anyhow. It just seems that all of a sudden none of the restore points will work and it comes back and says my system has not been restored to such and such a date. I like this feature as it gets me out of some jams but is it possible to use it too much.
When I used the xp home edition System Configuration Utility { SRU} it deleted all my system restore points. Not only did the SRU not solve the problem, but I could then not use the system restore facility which may have solved the problem . I have downloaded nothing but an Ad-Aware update since I lost all my system restore points.Can these deleted system restore points be recovered?
Let's preface this by saying I have not set any restore points.Now I'd like to set System Restore back to May 1st. I start System Restore Wizard (because I've never done this before and it seemed like an easy way to go about it), but the earliest restore point is June 23rd (or threabouts).My question: Is there any way to go back before that?
My system restore points are erased every 24, 48 or 72 hours. It appears to be random. I use XP home edition. I use XPfire wall. I use McFee & it is updated automatically. I have 60 Gig of free space on my hard drive. I have checked for a virus with both McAfe & Stinger. No virus detected
I've been havin trouble with my computer so I went to restore it and before it actually starts to restore it back to the date i choose,it doesn't do anything I click the date i wanted it to restore back to, click next,then it says the selected restore point blah blah blah,so i click next and it doesn't do anything It doesn't work for any of the dates.
How far back does system restore? How do you control how far back to keep restor points? I have been trying to fix a problem since February and want to go back to before then and my restore only goes back to April..I have not knowingly deleted any restore functions.
For some reason System Restore has stopped automatically creating System Checkpoints. It is turned on, and is set to use the Maximum amount of space for monitoring my C drive. Yes, there is a great deal of unused disk space. I had used Disk Cleanup/ More Options/System Restore Cleanup prior to the problem, only that one option, not any of the other Disk Cleanup options. So, I have no earlier Restore Points to restore to, only the ones which I have Manually created since.
Our application using MSJVM suddenly stopped working on one of the computers. The user claims that the application worked well about a month ago and stopped after that. The precise time when it stopped workign is not knwoen. He does not recall running any Windows updates etc., after that. Is there any way we could use system restore or something like that to find the difference from the current configuration to the one about a month back?
After installing a new driver for my printer that didn't work well, I tried system restore. I cannot get my computer to restore to any points. Can anyone tell me how to fix the problem?
I HAVE ATTEMPTED TO RESTORE MY COMPUTOR [PC- XP, serv.pac2 ] TO AN EARLIER DATE BUT I CAN NOT DO ANY DATE AT ALL .One reason could be according to windows is that because a anti-virus program removed a file. Thus it will not let me restore. MY QUERY IS-if i click on the system restore [in the system dialogue box] it says 'that it remove all of my restore points' [my words]Thus what does this mean and why would you do it if u can not re enter- because there is no restore points and if i go ahead with this process will it still reset my pc 2 an earlier point? a confused, mitom- TA.
