I have been given a desktop with win XP Pro. it will boot to the log in screen and i do not know or have the password for the previous user. I have a legal copy of XP Pro and try to boot using the cd in the cd drive. it will run setup and load all the drivers and when it would normally start windows, i get the stop screen error. I have tried several boot disks with the same results. I tried Morphix (Linux) and a ERD with same results.
View 1 RepliesMan, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
I have another long thread kinda ending up with this, but it died. The thread. Everyone ran away. This was long ago enough so I think posting again is not duplicating.Now, since getting this sytem around 6 mos ago. which now has new mobo---tho the original one was fine and now I have a spare and now good thermal paste, but the symptom manifested on both boards.I have, very occasionally been getting pool error stop screen.I was asked to post the speicific error with the premise that someone might understand the code and provide more info.i waited until it presented again.took pics and posted them. It has not presented since.I will now upload those again.if anyone knows wut this particular code means, that would be amazing. Cause I have done everything I can to find out, including on MS..and they have a page there which made me throw up, forget is not about my individual code.
View 14 Replies View RelatedFour or five months ago I installed a new HD in my Dell Inpiron 700m laptop. I used Acronis True Image, as I've done previously with my Latitude. Initially, I had some trouble, because apparantly one or two drivers were missing. I found a discussion about this online and ran through the steps to fix the problem and everything seemed fine. A couple days after the installation I received the blue stop error screen for the first time. Restarted the computer and hadn't had it appear again until last week. The other night, it was coming up every five minutes, shutting down the computer.
View 24 Replies View RelatedI get this almost everyday, I even restored the laptop to how it was out of box and it keeps crashing. Here is the error.MULTIPLE_COMPLETE_REQUESTS ***STOP: 0x00000044 (0x862df368, 0x00000D60, 0x00000000,0x00000000)
View 8 Replies View RelatedI'm getting a BSOD with the following Stop Error DRIVER_IRQL_NOT_LESS_OF_EQUAL *** STOP:0x000000D1(0x00000018,0x00000002,0x00000000, 0xF72BD25F) iastor.sys - Adress F72BD25F base at F72AE000 DateStamp 42b2df42 This happens every time I start up and also I am unable to boot into Safe Mode as it is getting hung on whatever file is after Mup.sys.My plan was to go into safe mode and update iastor.sys to a newer version but I cant. I also find it stange that this file is an issue as I only have a single hard drive and I was under the impression that this file had something to do with RAID.
View 12 Replies View Related2 months ago I ordered system from Cyberpower PC and it was shipped a week later.Set it all up,formatted Windows XP Home Edition and got it running. Shortly there after, I started blue screening and it seemed RAM related, so I swapped the sticks and it seemed I would only BSOD with one of the sticks, so I called the company, shipped it back, and got a new stick.
Then I started to BSOD again with the error message of IRQL_LESS_OR_NOT_EQUAL and then 0x0000000A (0x0000F78A, 0x0000002, 0x0000001, 0x806E4A8F), and this particular error would only occur while I was playing World of Warcraft. So first I pulled the new stick of RAM and tried playing... and everything went fine for a day, and then I BSOD'd again, same error
This has happened twice.I wake up in the morning and my computer has a blue screen with a stop error message:0x0000008E.
View 6 Replies View RelatedIn trying to get rid of some adware, I attempted to boot my computer (P4 2.8 GHz, 1.5 GB Ram, Windows XP SP2) in safe mode. When I selected "Safe Mode with Networking", I was brought to a blue screen called a "STOP ERROR SCREEN" - basically it said that it had to stop the booting up of the computer or the computer might be harmed. It suggested removing any recently installed hardware and disabling BIOS memory options such as caching or shadowing. So I rebooted and got into windows normally just fine.
Then I decided to try just regular Safe Mode (without networking) - when I selected that option, the computer started to do it, then rebooted and prompted me if I wanted to boot into Windows normally or safe mode, etc...I tried Safe Mode again - same thing, a reboot. I tried Safe Mode with Networking again - and I got the blue Stop Error Screen again.
This is pretty strange (at least I've never seen it) and I'd really like to be able to boot into safe mode.
The problem is on my buddies pc. It uses Windows XP Professional. I have it setup next to this pc I'm currently using. First I get this screen:
We apologize for the inconvenience, but Windows did not start successfully. A recent harware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
Safe Mode
Safe Mode with Networking
Safe Mode with Command Prompt
Last Known Good Configuration (your most recent settings that worked)
Start Windows Normally
Use the up and down arrow keys to move the highlight your choice.
Any choice I highlight brings this screen:
A problem has been detected and Windows has been shut down to prevent damage to your computer.
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps:
Check to be sure you have adequate disk space. If a driver is indentified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Check with the hardware vendor for any BIOS updates. Disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe Mode.
Technical information:
*** STOP: 0x0000007E (0x80000003, 0xF8470005, 0xF894C4B4, 0xF894C1B0)
*** SCSIPORT.SYS - Address F8470005 base at F8460000, DateStamp 41107b4b
An app was installed, and right after, a BSOD came up with the following error message: A problem has been detected and windows has been shut down to prevent damage to your computer. If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again, follow these steps: Check to be sure you have adequate disk space. If a driver is identified in the Stop message, disable the driver or check with the manufacturer for driver updates. Try changing video adapters.
Technical information: *** STOP: 0x0000008E (0xC0000005, 0xBF803EF6, 0xF70917c4, 0x00000000) *** win32ksys - Address BF 803EF6 base at BF800000, DateStamp 43446a58 Beginning dump of physical memory. Physical memory dump complete. Contact your system administrator or technical support group for further assistance......
I have a problem J, I cant get XP to boot up. My pc blue screens mid way through the loading windows screen and then re-sets. I had a GPU hardware failure, after windows automatic installed some software a month or so ago (not sure what it installed as I wasnt using the pc at the time). My pc would not post and the mbos gave a GPU beep error message. I have just brought a new GPU and now I can get to the pc to part load. Tried using my recovery cd, but that only gets half way and then blue screens with a STOP 0x000000c2 error. I think its a driver issue but as Im unable to get into the recovery to troubleshoot further, im not sure what I can do. The only thing I can do is rig up my pc hd to my laptop as a slave, does anyone know any software that can check an OS that not being used on a hd? Is there anything else I can try? I have flashed the BIOS to the latest version.
View 2 Replies View RelatedMy granddaughter downloaded some kind of game on my computer yesterday she said that while she was playing a box came up and the screen went blue well it has been blue ever since the error Disable or uninstall any anitvirus disk defragmentation or back utilities Check your hard drive configuation and check for updated drivers Run chksk/f to check for hard drive corruption and then restart your computer techincal info stop:oxooooo24(oxoo190203,0x81364008 ,oxcooo102 ,oxooooooo)
View 14 Replies View RelatedMy computer keeps giving me this error when I start it up Stop: c0000218 Unknown Hard Error Unknown Hard Error I can boot it into safe mode, but I'm unable to really do anything with it. When I try to go on the internet I get directed to a Yahoo search of whatever I entered into the address bar... and any links clicked bring me to random pages. I also noticed that the address of the link in the search isn't showing up in the status bar.
I put in My CD and it goes through the first blue screen (the one where is asks if you want to press f2 to do install drivers via A drive etc) and when it gets to "Setup is Starting up windows" (this is before all the HD formating and partitioning) I get the blue screen. it does not have much info on it all it says is:Stop: 0x0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)
View 5 Replies View RelatedToshiba Laptop My buddy just came over and has his Toshiba Laptop and it is having a blue screen stop error. Wanna see if we can get some help.He has windows 2000.you turn it on and it goes through every thing and then you put your password in and get to the desk top and all that is ok, when you click to get on the internet it would flash a blue screen and then shutdown. I went into system and advanced and unchecked auto reboot so now it doesn't shut down but you get the blue screen and you can't go anywhere when it comes up.
View 2 Replies View Relatedcan an on board grafix card/video card cause random blue screen stop errors?
View 6 Replies View Relatedhaving my laptop returned from service I found my Bios messed with where when I would start my computer but Bios wouldn't find my hard drive or an OS I found that my system was set to RAID instead of ATA. After resetting it back to ATA it boots up fine. However I wanted to reformat and start clean.I placed my XP disk in, reset my BIOS to read my optical drive first and no problems.However every time I get to partition drive all I see is "Unknown Device" If I press any key I get a blue screen of death. Most times it's the 0X0000008E.
View 9 Replies View RelatedI have just installed a Samsung CLX-2160 on my Dell Dimension 5150 PC,which runs Windows XP Media Centre.As soon as the PC started reading the installation CD, it crashed with the following (taken from event viewer):The computer has rebooted from a bugcheck.The bugcheck was: 0x0000007e (0xc0000005, 0x804f106f, 0xba4fbaac, 0xba4fb7a8). A dump was saved in: C:WINDOWSMEMORY.DMP.
I rebooted with F8 and chose last working config.After a little enlightened guesswork and advice I removed my old Dell 725 printer driver(which had started giving an error message on startup). Now I could load the Samsung driver etc and the new printer works.However, XP still crashes whenever I reboot normally I can still bring up a working system with F8 as above (but I have to reload my PCI card drivers again - 2 port serial and sound card - for some reason)
I was working on my computer, Windows 2000 Pro.I was moving my foot under the desk and accidentally switched off the surge protector.I turned the protector back on and restarted my computer.I get a royal blue screen that says Stop Error.Inaccessible Boot Device.None of the F8 options work for restart, they all say the same thing.I really don't want to have to reformat.
View 6 Replies View RelatedI'm gettting a blue screen when i try to start my laptop with Windows XP media. It's saying the registry cannot load the hive (file): /SystemRootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. I'm guessing I need the windows xp media reinstallation disk, but I can't seem to find it.
View 5 Replies View RelatedError message : stop 0xC2 or stop 0x000000C2 ,Error message says pool header has been corrupted.
View 7 Replies View RelatedI recently upgraded to multiprocessor and new motherboard, now I am getting this stop error message and my hard drive will not enter into windows.
View 9 Replies View RelatedAll new system Asus MB core i7 4 gig ram with sata drive. All hardware is up in the bios and recognized. I get the Stop:0X0000007B on install of XP pro service pack 2.
View 2 Replies View RelatedA problem has been detected and Windows has been shut down to prevent damage to your computer.If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again follow these steps.Check for viruses on your computer. Remove any newly installed hard disks or hard drive controllers.Check your hard drive to make sure it is properly configured and terminated. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.
View 4 Replies View RelatedI have been getting the dreaded blue screen of death with STOP: c000021a (Fatal System Error)" Error Occurs when i log into my windows 2000 service pack 3 and my linksys wireless usb network adapter connects me to the internet. My computer will remain on and run fine if i do not connect to the internet. This also will happen if i connect to the internet using my backup 56k modem
View 6 Replies View Relatedlaptop was infected with the Antivirus 2009 after surfing the web and I removed it using malwarebytes program. Then shortly after the laptop would show a blue screen, displaying "KERNEL STACK INPAGE ERROR" and then reboot. After the reboot, my laptop seemed to run fine, I downloaded AVG antivirus software to check if there was a boot sector virus (?) and after running the laptop for about 30 minutes, it showed the blue screen again and reboots. This kept on occuring.
Then I tried to reformat the laptop. The first time I tried to format it as FAT32, it got to about 60% before rebooting. The second time I managed to get past the formatting (FAT32 [quick])and I got onto the part of installing windows. About 20 minutes into the installation. A stop error appeared "STOP C0000218 Unknown Hard Error". Could the hard disk be corrupt
Installing windows on a pc built for my friend and it comes up with a stop code.
stop d1. driver_irql_not_less_or_equal then it states
acpi.sys
address fc40d3b4 base at fc3fb000
which i think refers to a stop a1 as well.
ive tried using 2 different type of memory on the m-board and still get the same error.
there are no other hardware besides a cdrom and hdisk, mosue and keyboard. i did have an old logitech mouse but swapped that as i read that can cause problems too.
i dont know how to go about fixing this as their is a hotfix for acpi problems but thatr equires u to actually have windows on teh pc in teh first place i.e safe mode.
i can get into bios and it performs POST no problems. the only other thing is it boots fromcdrom but it says no emulation.
I have a Toshiba Qosmio F15-AV201 Win XP MCE SP 2 laptop purchased in 2005. I have a one year old Toshiba Qosmio specific HD, that's the only change in the system I've made. I have satellite internet and use a Linksys router for the Qosmio. I live in a VERY rural area, so I left the connection unsecured.I got a stop error "attempt was made to write to read-only memory" and the culprit per the blue screen was w29n51.sys. The exact error code is 0x000000BE.Another weird "symptom" was vertical blue lines on the windows start up screen. These weird blue lines were NOT there in safe mode.My son recently downloaded a bunch of crap on the desktop, MP3s and possibly video clips. He got some nasty spyware/malware I managed to get off the desktop via the recovery console.
View 4 Replies View Related