Recognizing The Hard Disk Either In FAT Or NTFS?
Feb 3, 2005but how can you tell if you are running FAT or NTFS file system?My husband did our XP upgrade (over Windows 98) over a year ago and he has no idea.
View 10 Replies
ADVERTISEMENT
Setting Up New Hard Disk In NTFS And Old In Fat32 ?
Dec 12, 2007I have a Hard drive with a corrupted boot sector that is Fat32. I'm setting up a new hard drive with NTFS. I'm going to slave the old HDD on the other IDE for file recovery. Will this be ok using the two different file systems?
View 2 Replies View RelatedFirst Fat32 Now Ntfs: Hard Disk Not Detecting?
Oct 10, 2005I had a 40 gig hard drive : then bought myself an 80 gig to accomodate the huge amount of music I had collected: essentially using the second hard drive merely as a storage space: i.e. it had no windows or other interface installed upon it and was run from harddrive number 1 (40gig) due to long overdue need of formating : I reformatted harddrive 1 and following said format I couldnt read hard drive 2 (with all my beloved music) through windows
after much headscratching I remembered that my original windows was fat 32 win xp pro and this new format job was ntfs win xp homeI havent had a chance to test my hard drive on a fat 32 driven pc yet : and i was posting here in the hope that someone could enlighten me on whether it is worth trying another format job with fat 32 and xp pro or whether there is anyway i can convert the 2nd hard drive to ntfs.
Recovering Data Back From NTFS Hard Disk?
Sep 16, 2006I am having a problem with my 400GB HDD not displaying correctly - it displays as 127GB - in a new install of Windows XP on a seperate drive. My original setup was as follows:400GB SATA HDD with Windows XP as the Operating System plus Data - Single Partition - NTFS. 300GB SATA HDD with purely data - Single Partition - NTFS.I bought a new HDD today (SATA 320GB) and installed it in the PC. The original XP install saw it was installed and offered formatting options from Control Panel -> Administrative Tools -> Computer Management - no formatting options were taken.I then installed Windows XP (non-SP2 install, SP2 has been installed afterwards along with Video Card and Motherboard drivers) to the new HDD without removing the old drives first.
View 7 Replies View RelatedNtfs Hard Disk Not Recognized - After Loading Cmos Disappears
Sep 24, 2005i have a 20 gig hd (maxtor) that is not showing in windows xp. the drive is NTFS and is fine and does show in cmos but once loaded into windows it is not there. i had the drive previously in another system as a slave only for mp3's. It was formatted NTFS prior to transferring mp3's to it. Now i've tried it as both master and slave to get the files off but am now having this problem of windows not seeing it when i go into windows explorer
View 8 Replies View RelatedNTFS And External USB Hard Disk - Store Virtual Pc Files
Feb 25, 2005I have Win XP Pro SP2 I also have an external Lacie 250GB hard disk I want to store my Virtual PC files on. But, it is formatted at FAT32 and I can't put a file on there that is over 4GB. So, I tried to convert the drive to NTFS, but Windows won't let me do this. It keeps telling me the disk is dirty and to run chkdsk / f. Which I have done and completes fine finding no problems on the drive. Yet convert e: /fs:NTFS still does not convert the drive reporting it is dirty. What is causing this and how do I fix it? I have tons of data on the drive so I can't re-partition it as I don't want to loose that data. I need to convert it to NTFS.
View 6 Replies View RelatedPartitioning 40gb Hard Disk: Selecting FAT32 Or NTFS?
Aug 18, 2005i put fat32 on partition 1 and NTFS on partition 2 on the same hard drive can that be why my system isnt running good because i just installed windows xp on a formatted hard drive and it runs poorly. or can anybody tell me the best way to partition a 40 gig harddrive to get the most out of it....? I thought there was something wrong with my windows xp disk because out of all the times i have fdisk and reinstalled windows it never ran this bad...
View 14 Replies View RelatedConverting External Hard Disk From Fat 32 To NTFS Without Loosing Data?
Aug 5, 2007I have an EXTERNAL HD. I formatted it in FAT a few months ago. Ever since then, my laptop PC was unable to recognize the unit, but the Mac (which is not working right now, unfortunately) never had a problem with it. When I connect it to my laptop PC via USB, the USB icon shows up and the "USB Mass Storage Device Properties" says the "device is working properly." But the folder doesn't show up in My Computer, and diskmgmt.msc says the device is "Unallocated." Hopefully that doesn't mean the unit crashed because I have some stuff on there.Without losing the data (that should be on it, unless it crashed), I want to convert this thing to NTFS. I did some Google searching, but the instructions on how to do this (they say use convert.exe) aren't working. Moreover, no one mentioned how to convert an External, secondary HD.
View 11 Replies View RelatedFat32 Or NTFS: Installing New Hard Disk Wont Make Decision Of Selection?
Sep 23, 2007why I should go with NTFS I'm installing a new HD,and now have to decide which way to go?
View 3 Replies View RelatedUSB Flash Memory Recognizing As Disk Drive
Apr 8, 2006When I plug in my USB Flash memory, it is automatically recognized as a disk drive. When I try to access it, it asks me to insert a disk.
View 19 Replies View RelatedSystem Not Recognizing Full Disk Space?
Mar 22, 2005I just had Win XP Pro installed on my machine. Primary HD is 80 GB. The drive previously ran Win 98 SE. The tech formatted it and installed Win XP Pro. System runs fine and all appears to function OK. However, the drive capacity is not accurately displayed anywhere in the system (other than BIOS). I'm trying to find out how I can have the drive space accurately displayed.
View 5 Replies View RelatedHome Recognizing External Hard Drives
Jan 2, 2006i have unsuccessfully tried to install a maxtor and a western digital external hard drive. in both cases, i tried both usb 2.0 and firewire. both ports are good. the new hardware "wizard" cant install the new hardware because it cannot find the drivers. i thought xp had all the drivers. the really annoying part is that my kids p.o.s. off-the-shelf emachine recognized and installed both drives! i am currently running peripherals on both usb and firewire with no problems.
View 2 Replies View RelatedBarts PE Not Recognizing Hard Drives On Dell PC With SATA
Sep 2, 2005Used to use Barts PE on a Windows XP system that had IDE drives. Created a new one since I was getting an error on my new Dell System with Windows XP PRO. Said it could not find a certain .in file. So I created a new Barts PE using a Windows XP Pro CD with SP1 and a blank CD to write the ISO image. After rebooting with Barts PE CD with ISO image, it looked fine and booted okay into Barts PE---BUT---it could not see my hard drives.
View 5 Replies View RelatedHard Disk Configuration Master - System Doesn't Show Second Hard Disk
Feb 28, 2008If I want to attach second hard disk with the same configuration of master hard disk, then system doesn't show second hard disk altogether or new hard disk begin to malfunction. Such as suddenly begin to give sounds like TICK, TICK TICK. Suddenly vanishes from the 'MY COMPUTER' drives. Suddenly denies to copy paste functions. BIOS shows both SATA drives. But Win XP doesn't load or simply hangs while starting up [booting up]. It happens when I attach second SATA drive with system. If only one SATA is attached, then WIN XP boots normally.
View 3 Replies View RelatedFormat Disk To NTFS Without Using Xp Installation
Aug 8, 2005How do you format a new, fresh, hard drive to NTFS? Without using an XP system or installation disk? I know for old stuff you can use fdisk and format in DOS.
View 3 Replies View RelatedBoot Disk For An NTFS Or FAT Partition In XP
Sep 12, 2007I am trying to create a Boot Disk for an NTFS or FAT Partition in Windows XP.So far i have formatted my floppy disk, but im stuck on the next step!Copy the Ntldr and the Ntdetect.com files from the I386 folder on the Windows XP Setup CD-ROM, Windows XP Setup floppy disk, or from a computer that is running the same version of Windows XP as the computer that you want to access with the boot floppy.I have found the Ntldr file and the Ntdetect.com file, but when i have copied them where do i paste them?? What do i do with them?
View 14 Replies View RelatedNTFS Dynamic Disk Unreadable
Sep 20, 2004I have two hard drives in my computer. The first disk contains XP and the software, the second contains personal stuff. The second disk is installed using NTFS dynamic disk. Last weekedend I formated the XP disk, and installed XP again. After installing, the second disk comes up as "unreadable" dynamic disk. Is there a way to make it readable? I haven't done anything to it, so all the data should be there.
View 3 Replies View RelatedPQBoot Run On NTFS Disk Which Will Now Not Boot
Apr 6, 2005While in XP I ran PQBoot from the Partition Magic 7 Start Menu, it loaded a command window and asked which O/S I wanted to load - foolishly I entered 2 for Red Hat 9 and pressed enter. (Dumb I know, and changing my mind 1 microsecond later was still too late.)When it rebooted it said "Autocheck not available" and rebooted.
I booted the XP CD and chose the second recovery option but the list of partitions had at the top a partition that was not C:Windows, I can't remember exactly what it said but used drive I: and some other description. So I exited without doing anything to do more research.I booted Knoppix 3.7 live Linux CD and that reassuringly showed all the drive partitions still where they should be especially hda1 my Windows partition.
Cannot Format Hard Drive - Converted To NTFS
Oct 23, 2004I am trying to format my hard drive, it is already converted to NTFS but I cam getting the error message cannot format drive e (my drive letter)I have ran CHKDSK and it is saying unable to perform scan on RAW drives
View 6 Replies View RelatedConverting External Hard Drive To Ntfs
Apr 7, 2007I would like to convert my external hard drive to NTFS, can anyone give me some easy to follow instructions?
View 3 Replies View RelatedFormatting C Drive With NTFS: Unable To Read Disk?
Aug 12, 2005I'm trying to boot to my trusty 98 bootup disk and it says it can't read the c:....my only guess is that it's an ntfs partition.how can I format this thing?
View 4 Replies View RelatedSATA Hard Disk 3.0 To MOBO 1.5 Hard Disk
Jul 4, 2010recently bought SATA 3.0 hard disk(samsung)and i forgot if my motherboard support this hard disk,after checking it only supports 1.5 SATA.I visited samsung website on how to force my Hard disk to run at 1.5
View 8 Replies View RelatedNTFS Encryption Recovery - External Hard Drive
Aug 24, 2007Currently I reformat my laptop for some reason. I do some folder synchronization using SyncToy on WinXP to my external hard drive. After completing reinstall new WinXP with the same computer name and user account, I cant open my backup files due to the NTFS encryption is still with the files on by external hard drive. How can I recover those files?
View 2 Replies View RelatedBlack With Something About A System Disk Error Ntfs.sys Missing/corrupt?
Sep 20, 2005When left for a while (about half an hour), I come back to it and see that the screen is black with something about a system disk error. I experienced this before I had to re-install windows a few weeks back.The first time, I pressed enter, and the system started up fine. The second time, the secondary loading screen (that's what I call it...it's like little white rectangles at the bottom of a black screen...you know the ne, right?). Well yeah that goes really really slow. When it get's a few inches in, it stops and tells me 'system32driverstfs.sys is missing or corrupt'.
View 1 Replies View RelatedCan't Run Disk Error Check - Ntfs File System Not Open
Jun 22, 2005A week after updating to most current Windows SP1critical updates (its only change I can think of) I happen to notice that I cannot run a disk error check, I am told that its a NTFS file system and Win cannot open volume for check. Also when I start computer I have to log on with my password every. I have tried to eliminate the password requirement to no avail. I cannot return to pre-update status with System Restore because its been a week and there is too much new data in the system. This is a free standing desktop PC. Can anyone help with these two things? I hope so as I do my error check regularly and find it frustrating to have to log on every time I restart .
View 8 Replies View RelatedCopy Data From Hard Disk To Pen Drive Using Bart PE Bootable Disk?
Sep 15, 2009I have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies View RelatedHard Disk Free Space: Clear Recycle Bin And Disk Defragmenter C?
May 1, 2007It says that TOTAL SIZE = 39 GB And Free Space = 5 GB Which means that the size of all files on C is 34 GB But when I select all files including Hidden files and Right Click> Properties, its size of all files is only 27 GB.I did clear recycle bin and disk defragmenter C, but still the same. So why is that?
View 4 Replies View RelatedCloning Hard Drive: Transferring Cloned Data From External Hard Disk?
Jan 8, 2009I am cloning my existing hard drive in my laptop (sata) to an external hard drive (pata) in preparation for installing a new larger hard drive (sata)in the laptop. Can I, or how do I transfer the cloned data from the external (pata) to the new internal hard drive (sata)? Thanks in advance and I apoligize if this is a rudimentary question as this is my first time attempting something like this.
View 6 Replies View RelatedExplorer Hangs When I Right Click On Hard Drive - Hard Disk Properties
May 6, 2005I can not access hard disk properties because Windows Explorer hangs whenever I Right click on a hard drive icon. I am running WXP pro SP2 completely up to date with updates.
View 1 Replies View RelatedFixboot Changed NTFS To FAT / Windows Wont Recognize Ntfs Partition?
Jun 4, 2006Windows Xp does not recognize the NTFS partition. Any ideas on how to get at the files?
View 4 Replies View RelatedFormatting Hard Disk From Bios And Not Using Disk Utilities?
Feb 27, 2007if someone could tell me how to format windows xp home edition from the bios and not using the xp disk. I have already tried right clicking on drive c and selecting format but the message says windows cannot format this drive. Quit any disk utilities or other programs that are using this drive, and make sure that no window is displaying the contents of the drive. Then try formatting again.
So I closed all open programs that I could but still no luck. Then I tried the format from running the run command and typing format c:but I get this message format cannot run because the volume is in use by another process. Format can run if this volume is dismounted first. All open handles to this volume would then be invalid. would you like to force a dismount on this volume? (y/n) so I type y for yes and hit enter then nothing