i am getting the screen that says a problem has been detected and windows has been shut down run chkdsk/f.. physical memory dump complete but when i go to do the chkdsk/f it does a chkdsk read-only because it is being used by another volume. i tried to defrag but it crashed.
Everytime I try to use it it says>>>> Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume C:,please run chkdsk /f:problem is, my chkdsk does not currently work!
Win xp pro, pen 4, norton antivirus, Win firewall. After I downloaded and installed Windows Live Messenger the defrag process wouldn't defrag all the files. I reformatted my computer without WLM and defragging was not a problem, worked like a charm. So, I downloaded and installed WLM again, and lo and behold the same problem occurred, the defrag program would not defrag all the files. I uninstalled WLM and defrag process still wouldn't defrag all the files. How do I solve this problem of not being able to defrag all of my files without reformatting my computer.
My general understanding is that it isnt necessary to defrag very often. An occasional defrag should do the trick. Unless, maybe, youve done a lot of stuff recently. I do have several questions though that I hope someone can clear up for me and anyone else that might be interested.
1. Does a pre windows defrag program help any at all? If so, how often should it be run?
2. Is this different than the pre installed Microsoft chkdsk program? Isnt it also a pre windows defrag program?
3. Is one or the other better? Or are they basically the same?
4. What happens if, on occasion, you use a pre windows defrag program and the chkdsk program? Is there a conflict?
5. Does one try to write a certain way and the other rewrites a different way and therefore your wasting your time and effort?
6. Does a pre windows defrag program make a windows defrag program unnecessary?
7. Since it has been stated that the windows defrag program works fine, but isnt the greatest, what if you use a different combination, like, JkDefrag and a pre windows program? I mention JkDefrag because, if you wanted, it can be set to defrag daily or weekly. Set and forget.
8. Assuming one is doing a lot of stuff, when does a registry defrag program enter the picture? Or is one ever needed? Is this just a marketing thing?
9. And, of course, there are also registry cleaners. Again, assuming your doing lots of stuff.
10. And also theres also programs like CCleaner program, which cleans out cookies, temp files, etc.
11. Is there an order that one might want to run these programs? Even if it is only monthly or even less often?
So, my inquiry, isnt which program is better, as I would assume there would be a lot of opinions about that. But rather, what combo might one want to have on hand, or run, on those occasions that you feel the need to defrag. Again, if we look at the CCleaner program, in basically one step, it does a pretty good job of cleaning out all sorts of stuff. If you wanted, it can even be set to clean automatically. Set and forget. If one were to do the same steps, manually, it would take much longer, and maybe, still not be as effective as the CCleaner program. I have Zone Alarm firewall. Basically its set and, for the most part, forgotten about. I have the AVG anti virus program, set to do auto scans on a daily basis. Set and forget.
Depending on the "Expert you speak to" they all have their own opinions. One tells me to defrag daily, another tells my it will damage the hard drive to defrag daily and should not defrag more than once a week.
Unable to defrag my computer. Get message Disk Defragmenter has detected that CHKDSK is scheduled to run on volume HP-Pavilion(c Please Run Chkdsk /f When I tried to run Chkdsk /f, I get the message: The type of system is NTFS Chkdsk cannot run because the volume is in use by another process would you like to schedule this volume to be checked the next time the system restarts (Y/N)Yes or No I still Can't Defrag and continue to these messages.
When I use XP's utility to analyze my disk fragmentation, it says "You should defragment this volume", but the defrag process hangs when it is about 1% done. Defragging when booted into Safe Mode doesn't solve the problem. I searched around, and it seems like this might have to do with my FAT32 disk partitions (see my specs). What do you guys think? What would be the next steps?
I have a dell 600m with Windown XP and when I go to Disk Defrag i get the following message: disk defragmenter has detected that Chkdsk is scheduled to run on the volume *C. Please Run Chkdsk /f.
not sure what that means...my system restore points also dont work but otherwise the computer is running smoothly...just afraid that my hard drive could crash again!
When I defrag my system, it appears to be defragmenting, but when it finishes, there are still loads of 'red' fragmented files, hardly anything has changed from before it started. This has been happening now for quite a while.
I am having a problem getting Defrag to run on my C drive. I've tried it several times and it runs to completion but then when I check it again it is still very fragmented and says that I should defrag it. It reports that my drive is about 35% fragmented. I tried booting in Safe mode, thought that might do the trick but got same results, which means it did nothing. I am running Windows XP Pro SP2.
I downloaded Diskeeper 2007 Pro Premier for a free 30 day trial, decided I didn't want it, uninstalled it and now my XP Pro Defrag has ceased to work any longer. I get some weird message that it can't initialize and that I must have downloaded a different version . guess the two were fighting each other. Point is, can I download MS Defrag as a stand alone (Googled but no luck) or do I have to reinstall XP all over again... Also, is MS Defrag good enough are does Diskeeper do a better job for the averge home user?
The Display adapter is a 64MB DDR NVIDIA GeForce4 Ti 4200 with TV Out, and I am using Internet Explorer 7. Am I doing anything that is incorrect and should not do, or do differently in the following?I am using Diskeeper 2008 Home, and Defragment my Hard Drive every two hours. I clean my Registry with Advanced Registry Optimizer 2008 about every five days. I perform a Full Registry Backup right before I execute a Diskeeper Boot-time Defragmentation [which I perform about every three days. I delete all my Partial and Full Registry Backups when I have three or more Full Registry Backups. I then Perform a Full Registry Backup [so I never have more than three Full Registry Backups at any time, to save Disk Space.] I know that the Registry is Vital for the entire computer,
I am unable to use windows defrag. I tried the help given to Chief1966 but i didn't work. I downloaded Auslogics DiscDefrag and ran it but I would still like to know why the windows one won't work.
My friend has a dell demension desktop that is running way slower than it should. I can't figure out why. Her CPU is a P4 2.66 GHz; with 1.25GB PC2700 RAM; 80G HDD (using 25%); The only hard ware installed is a printer, high speed modem, and ipod. I updated the drivers for those, and still no help. I also went through add/remove programs and got rid of those that she will never use, I did not remove any system critical programs, I'm an advanced user so I know what not to delete. I also went into the system tools and stopped some services for running auto on system boot. Like her Ipod, I set to manual, Printer (not spoolsvc) I set to manual, etc. I also ran a defrag on the HDD. Still, not much difference.
I just noticed this yesterday on my laptop. When I boot up the computer I get a screen that says "Autochk not found -Skipping autochk.exe" then goes to my login screen and I am able to login with no visible problem. Now I cannot use the restore function, it tells me unable to restore. I also cannot defrag the drive. The computer is a Toshiba laptop 2.0 Pentium m 1g mem, 80g hard drive
A friend has a 30 gig XP Pro laptop with 17% free...When he runs defrag most of it is way fragmented...He runs through the defrag fine and after it completes it tells him he needs to defrag again...With no changes in the fragments...His computer is clean of spyware/adware/virus/trojans/etc
I want to use a Defrag programe in order to clean up my computer (truse me, I really need to clean it up...). Now I have a programe called "UltimateDefrag", and I'm running a defrag using this programe as we speak. Also, since I'm not sure about this programe, I've taken a look in the programe manual, and I could bearly understand enough to run a defarg using this programe.
I have an Acer Aspire notebook, w/ 37 gig hard drive partitioned into two drives. D (backup, archive) is 98% empty. C (everything else) is91% full. Windows NT will not let me defragment the heavily fragmented C partition for lack of minimum 15% free space on the drive. How can I go in and reasign the drive sizes, without dumping everything and reformating? I'm handy with a power tool, but computers frustrate me.
I'm really stumped. My computer was moving slow so I decided to do a possible defrag.When I clicked analyze I got the message that a disk check had been scheduled and to do that first. I had not scheduled a disk check. I went ahead an scheduled one and restarted my computer and then all.
When I try to open System Information, I get the message; 'Can't Collect Information.' A network error occurred in connecting to Windows Management Instrumentation. Can this be fixed or do I have to reinstall XP? Also Defrag will not work and the Icon for Windows Update doesn't work.
Defraging main HardDisk Drive in XP Home edition w/ diskeeper 8.x and everything went smoothly as always, but then I decided to uninstall some useless apps and then went back to re-defrag and the reserved system space disappeared. Diskeeper was moving my files into the area where the reserved system space used to be so I stopped it. I then ran system restore and brought my system back 2days and re-tried to defrag and the reserved system space is still missing. Is this even a big deal? The computer (Dell 4400 P3) seems to be working just fine. Thanks.
The defrag screen shows 2 C drives each a mirror of the other. Scan disk recognizes only one and shows everything OK. How can I remove the mirrored drive and show only the correct one. All other functions are OK.
For a while now i had a few HUGE files for these games i have and i can't seem to defrag them. does anyone no why or if its even a that much of a big deal.
I've switched from Windows XP to Windows 2000, because of the fact that I had problems with the GIS program I was working with. Everything went well for a month now, until today. I've uninstalled several programs (not major ones - just mapviewers) to gain more space on the c-drive. I wanted to defrag the c-drive and it gave me an error message "drfgntfs.exe has generated errors and will be closed by windows. You have to restart the program. An error log is being created." I then close defrag and another error message appears "mmc.exe has generated error " the same as above. What am I suppose to do in order to "correct" this?