Can't Install SP3 On My Home Build Pc - Disabled Antivirus
Oct 23, 2008
I have tried three times to install SP3, (winxp) mob asus M2V-MX, cpu AMD Athlon (tm) 64 x2 dual core processor 4400, each time I get right to the end of the install and it says access denied, I disabled my anti-virus and firewall and tried to install it in safe mode,
but I still get access denied, and each I have to do system restore to my pc to get back to how it was
I got in touch with microsoft and this what they want me to do, but to be honest I don't trust them I don't want to mess my system up, so would you please have a look at what they have sent me.
View 10 Replies
ADVERTISEMENT
Apr 28, 2010
Autoplay was disabled by some antivirus program, I want to enable it again but it doesn't work. Both optical and virtual dvd drives have no autoplay. I tried tweakui, set all drives to enable autoplay, but it didn't work.
View 7 Replies
View Related
Aug 13, 2007
I am wanting to use 32-bit XP pro on my new build but cannot get it to install.
This is to avoid dealing with XP x64 driver searches and I do not want to lose netmeeting and msconfig so I refuse to convert to Vista just yet.Also, I am not completely convinced my build is Vista ready.The 32-bit XP install BSODs after doing "loading all the setup files".I have ACPI set to DISABLE.The APIC option in the BIOS is unselectable and is set to ENABLE.
No, there are not any BIOS updates available for my MOBO.Yes, I ran memtest86 and had 0 fails on multiple passes.Yes, I tried default BIOS settings.Yes, I tried Fail-Safe BIOS settings
View 6 Replies
View Related
May 12, 2010
I have built a new computer with an Athalon IIx. Unable to install OS (XP), I have tried 3 different had drives, but unable to complete the install.
View 2 Replies
View Related
Sep 30, 2008
I recently disabled my primary HDD in windows unintentionally. Now windows will not boot. I receive the BSOD message telling me i need to run chkdsk but i know the HDD works fine. I installed a second windows on the same hdd to boot to and it works. How can I alter the files in the windows folder of my primary install to renable the HDD so that I may boot it?
View 13 Replies
View Related
Sep 26, 2009
Please can some one help me with this one I am just about to throw my laptop out of the window.I had a really bad virus on my laptop the other day and have had to re-install from the original recovery disc (laptop is HP pavillion entertainment Notebook PC - HP Pavillion dv1000 - about 3.5 years old). Luckily all of the data and emails are ok. The problem is that when I bought the laptop I also bought a legitimate XP Proffessional upgards with SP2, now when I go to install this it says that the original version on the laptop is newer than the upgrade, then another message says that the upgrade function has been disbaled. Can this be enabled again and can the upgrade be installed like before without losing any data.
View 14 Replies
View Related
May 7, 2010
When attempting to install certain packaged software it will fail or in some cases bring up the Windows Installer information window.We have noticed that it appears to happen when an installer, EXE or MSI relies upon transforming a further extracted MSI with an MST file.This only occurs if the files are attempted to be extracted to the root of the temp folder. The files are not created hence cannot be run. The Windows Installer information window will appear if you attempt to run msiexec pointing to a file that does not exist.
View 6 Replies
View Related
Jun 20, 2005
I ran into a Trojan and finally after many attempts to remove, ended up using Microsoft's malicious software removal tool. (Free) and Norton's 2002 with updates. No slowdowns now while on the Web or local use. However It takes forever to shutdown. I went in and changed the normal shutdown time from 20000 to 5000 that seemed to solve it. The next day it slowed down again. I followed the instructions at Microsoft's website called Startup and shutdown trouble shooter. I went to msconfig and followed instructions. I found that if I disabled tfswctrl.exe, It would shut down fast. I read in a posting that the file is a HP file concerning DVD or Cd operations and isn't essential. PS I did run REG Organizer 1.4 in the automatic reg cleaner mode and it found additional problems that it repaired and some bad folders and links that were bad. That didn't solve the shut down length.
So my question is there a way to solve this dilemma, like an update? or can I just keep it from running without effecting my 2 CD/dvd units. both are HP one is Cd write and DVD read and the other is DVD/CD write both.
View 14 Replies
View Related
Mar 5, 2009
I have McAfee antivirus , while try to install in windows xp , it says " no network connectivity" eventhough my network connection is alive.
View 2 Replies
View Related
Jan 5, 2009
We install two or more antivirus software in a system having WXP?
View 8 Replies
View Related
Oct 5, 2007
Well I installed a program called snagit which i thought was totaly safe in the begining but out of nowhere
my taskmanager shut down button etc disappeared or i didnt have acces to itafter reading some on the internet i found a way to work around thisI fixed most of the things but there is still the darn antivirus that is missingfiles but when i look at the map its there
View 6 Replies
View Related
Sep 4, 2005
I downloaded EZ Trust Antivirus 2005, but am not able to install it on my Windows XP 2002, Service pack 2, Dell Optiplex Dim2400. The original download was done on my personal desktop and then copied to "admin" desktop. The error message is "You do not have authority to run this program, please log on as administrator." This error appears even in safe mode and even when I am logged on as administrator.
View 2 Replies
View Related
May 20, 2006
it isn't acting right, but I have been trying to install norton antivirus. She bought the package and has a 2 year subscription, and afterwards we ran live update. It then asks for an activation key, which we have from the email sent to her. When we click OK to tell it that we want to put it in, it does nothing. No matter how long you wait or how many times you click OK, the box just sits there. For this reason, we cant update her virus definitions or get norton to protect her computer. norton is not the only button that will not respond. Somehow the viewpoint toolbar was installed on her computer. When we try to uninstall the viewpoint toolbar or if I go to add/remove programs and try to uninstall it from there, it brings up a box that asks are you sure you want to uninstall viewpoint It does the same as the norton box; it will not respond, even if I click yes and wait
View 5 Replies
View Related
Sep 5, 2005
I am trying to install Norton Antivirus 2005 to my computer but it will not go. All other cd's work except that one. I have Windows XP and I installed the Service Pack
View 1 Replies
View Related
Apr 24, 2009
I have run into a snag. After installing Trendmicro I started having problems. After the install it took forever to load, and when it did I get a warning that I have no virus protection. I removed Trend with it's own removal tool and installed AVG Free, I get the same thing, The resident shield and email won't start. I install Vipre and the same thing protection is turned off and won't turn on. I have cleaned the registry of all norton traces, avg and others. I have did a scan with viper while it was installed and found a few items that I cleaned. I'm at my wits end and have never seen this happen before.
View 5 Replies
View Related
Apr 24, 2007
I am trying to intall McAfee Antivirus supplied by Comcast as a perk for using their services but I get an error code saying it will not install because I have Norton Antivirus 9 still installed on my PC. I removed that software over a year ago
View 2 Replies
View Related
Jul 9, 2009
For some unknown reason my anti virus will not update as it says there is no connection that it could find to update with, which I find rather suspicious. I could neither access ANY antivirus websites either. ex www.grisoft.com, www.mcafee.com, www.symantec.com.
So I done a clean install formatting my hard drive fully and starting from scratch. And to my fear I still could not access ANY antivirus sites still.
I had only installed AVG Free and Firefox. Even before I connected the net to the computer I put AVG on just to be safe and it still would not update.
View 9 Replies
View Related
Jun 19, 2006
I want to install trend micro antivirus, but every time i try to install it it says norton 2003 is interupting it. Then i try to uninstall norton 03 and it says "Fatal Eror".
View 4 Replies
View Related
Jul 2, 2005
I installed Window XP upgrade and didn't realize that it would disable my Norton antivirus 2004. After installation, Windows informed me that Norton would have to be reinstalled. I tried reinstalling it, but couldn't until the disabled one was uninstalled. When I tried to uninstall it, there were some files that the uninstall program couldn't find, so the uninstall failed. I need to know how I can get the disabled one off my system so that I can reinstall Norton again.
View 1 Replies
View Related
Jul 16, 2005
I can't install norton antivirus 2005 , basically what happens is that when I run the install.... it doesn't start anything and I get a message saying that an installation process is already running... I have attached a pic with the explanation of the situation.
View 12 Replies
View Related
Feb 14, 2005
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
View 9 Replies
View Related
Apr 16, 2006
my old hard drive crashed and i got a new one.I have a vpr matrix computer i used the restore disk on the new hard drive. it loaded fine. but when i did the restart it would load the xp screen then the cpu would restart. i have no idea where to go from there. i tried to reinstall xp. from there i have no idea what to do.i know from the description i gave i will prob need to give you more info. anything you need just ask and i will try too find the answer.
View 13 Replies
View Related
Oct 8, 2008
I have been running windows XP SP3 and have been happy with it. But I was going to go with Vista on the new bulid (I can get it at a student discount) in order to have a 64-bit OS and have better access to memory. But this week's news has me convinced that I should should stick wiht XP until Windows7 comes out.
I do moderate gaming and lots of multitasking (many open windows, ITunes pumping to my home stereo, etc.)
So, here is are my questions:
-Is windows XP 64-bit even available anymore?
- If so, is it worth it to install the 64-bit version? (will the diferences even be noticable?)
View 8 Replies
View Related
Mar 21, 2005
I just got a new custom computer with a ECS Kt600 Mb, AMD 2200 XP, Maxtor 80gb hdd, 512mb pc2700. Everything work great but when I tried to hook up my HP V40 all-in-one printer (USB cable), it will not recognize it at all. I changed cables but to no avail. I checked the ports and it recognizes my pen drive when I plug it in.
View 3 Replies
View Related
Apr 18, 2007
going to build a new PC and need a windows disc...was going to get a windows home edition......is it available in 64 bit version???if not what should i get...(NOT VISTA!)
View 15 Replies
View Related
Jul 26, 2005
I cannot seem to install SP2. Every time I try, it freezes up somewhere in the middle. I just tried last night, and it never made it past the first message. Something like "Initializing installation". It doesn't sound like the hard drive is doing anything. When I try to cancel the install, it will then freeze on the "Cancelling Installation" message. The only way out is to "End Task". The furthest I got was one time when it seemed to finish installing, but when it rebooted, my system was at 640 x 480 resolution, and still at SP1! I then ran a System Restore and got back to where I originally was, minus a bunch of security patches, even though the point I restored should have already had those patches
Notes:
-When trying to install, I let it run OVERNIGHT, so it has plenty of time to work.)
-System is clean of Spyware, Viruses, etc.
-System performance is pretty good, although I do get an occasional blue screen, hence the reason I'm finally trying to update.
Does anyone have any idea how to troubleshoot this?
View 3 Replies
View Related
May 9, 2008
All of the SP2 install guides at windowsreinstall.com link provided in the sticky state that XP Home CD is required, what if I don't have one, I have a Dell-provided "reinstall" CD for XP. Can I still use the same procedures to upgrade to SP2
View 5 Replies
View Related
May 5, 2006
Hi folks, I sure could use some help pretty quick. I bought an upgrade version of Xp Pro on Ebay, looked great I got the holograph disk and all, with original manual etc. Microsoft says its not a genuine copy. Now I cannot find my receipt or any info on this to follow up on. So now I need to uninstall XP Pro and re install my XP Home version.I need help how to do this so I can be legal again and get updates. I cannot afford another copy of XP Pro.
View 5 Replies
View Related
Jul 19, 2009
I've been using XP Home with IE 6 and SP2 for a long time. I read a long time ago about people having problems after installing SP3 so I never did. By the way, I do not like IE7. Is there any good reason why I should install SP3 if I plan on staying with IE6?
View 4 Replies
View Related
Sep 14, 2007
Reformated and reinstalled windows xp. after instalation finished.i noticed i actually have 2 versions of xp home on my harddrive, how do i remove one without it effecting the other? i did this once before thur the reg ( i think) but i cant remember how.
View 1 Replies
View Related
Aug 13, 2006
I had windows SP2 on my Compaq Presario SR1123WM before it crashed and went back to California for repair.I still have the CD to install the program.But it will not install, either from download from microsoft, or from the CD.I get an error message " Extraction failed.(ccyclic redundancy check)" And a few minutes later, I get the screen, " SP2 did not install," or some such thing. Anyway, I have tried 14 times to install this thing, but Microsoft tells me that Compaq is responsible, because it was OEM installed.
View 5 Replies
View Related
