Home New Install
Apr 16, 2006
my old hard drive crashed and i got a new one.I have a vpr matrix computer i used the restore disk on the new hard drive. it loaded fine. but when i did the restart it would load the xp screen then the cpu would restart. i have no idea where to go from there. i tried to reinstall xp. from there i have no idea what to do.i know from the description i gave i will prob need to give you more info. anything you need just ask and i will try too find the answer.
View 13 Replies
ADVERTISEMENT
Feb 14, 2005
I have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
View 9 Replies
View Related
Jul 26, 2005
I cannot seem to install SP2. Every time I try, it freezes up somewhere in the middle. I just tried last night, and it never made it past the first message. Something like "Initializing installation". It doesn't sound like the hard drive is doing anything. When I try to cancel the install, it will then freeze on the "Cancelling Installation" message. The only way out is to "End Task". The furthest I got was one time when it seemed to finish installing, but when it rebooted, my system was at 640 x 480 resolution, and still at SP1! I then ran a System Restore and got back to where I originally was, minus a bunch of security patches, even though the point I restored should have already had those patches
Notes:
-When trying to install, I let it run OVERNIGHT, so it has plenty of time to work.)
-System is clean of Spyware, Viruses, etc.
-System performance is pretty good, although I do get an occasional blue screen, hence the reason I'm finally trying to update.
Does anyone have any idea how to troubleshoot this?
View 3 Replies
View Related
May 9, 2008
All of the SP2 install guides at windowsreinstall.com link provided in the sticky state that XP Home CD is required, what if I don't have one, I have a Dell-provided "reinstall" CD for XP. Can I still use the same procedures to upgrade to SP2
View 5 Replies
View Related
May 5, 2006
Hi folks, I sure could use some help pretty quick. I bought an upgrade version of Xp Pro on Ebay, looked great I got the holograph disk and all, with original manual etc. Microsoft says its not a genuine copy. Now I cannot find my receipt or any info on this to follow up on. So now I need to uninstall XP Pro and re install my XP Home version.I need help how to do this so I can be legal again and get updates. I cannot afford another copy of XP Pro.
View 5 Replies
View Related
Jul 19, 2009
I've been using XP Home with IE 6 and SP2 for a long time. I read a long time ago about people having problems after installing SP3 so I never did. By the way, I do not like IE7. Is there any good reason why I should install SP3 if I plan on staying with IE6?
View 4 Replies
View Related
Sep 14, 2007
Reformated and reinstalled windows xp. after instalation finished.i noticed i actually have 2 versions of xp home on my harddrive, how do i remove one without it effecting the other? i did this once before thur the reg ( i think) but i cant remember how.
View 1 Replies
View Related
Aug 13, 2006
I had windows SP2 on my Compaq Presario SR1123WM before it crashed and went back to California for repair.I still have the CD to install the program.But it will not install, either from download from microsoft, or from the CD.I get an error message " Extraction failed.(ccyclic redundancy check)" And a few minutes later, I get the screen, " SP2 did not install," or some such thing. Anyway, I have tried 14 times to install this thing, but Microsoft tells me that Compaq is responsible, because it was OEM installed.
View 5 Replies
View Related
Jun 19, 2006
i had to reformat and install all new xp home every things working except i cant set home page to what i want.
sp2 all security updates virus free and spayware free
View 21 Replies
View Related
May 1, 2006
I want to put the original XP Home disc back on my computer to replace the XP Pro already installed. I get a message saying that the one I want to install is older than the one being currently used and that all settings will be lost. How can I safely install the old operating system (XP Home) without losing my data or installed software applications?
View 9 Replies
View Related
Jan 21, 2009
I'm having a Windows installer problem that is giving me fits. I've tried everything I can find on line and nothing has worked. I'd like to do a repair install, but the only software I got from Dell will wipe out my system and restore it to it's original state. Since I've got the license for it that came with my computer, can I get an XP Home install disk somewhere I can use to do this? I'm assuming it's legal to do this - am I wrong?
View 8 Replies
View Related
Nov 18, 2007
I have never had this problem before but I am trying to do a fresh install of windows xp home on a dell dimension 2400 desktop. I deleted the current partition and then continued with the install. The computer is only currently at the "Installing Windows" portion right now and I started it at 10am this morning. So at my time it has been 7 and 1/2 hours so far. Its not frozen either. Does anyone know why it might be taken so long to install?
View 14 Replies
View Related
Sep 1, 2005
I've had several instances where my system loads the devices from theWIN XP Home Oem CD-ROM and then when it gets to "Setup IS StartingWindows," the system hangs and doesn't continue with the install. I have no OS on the system to check any of the drivers/applicationsrunning other than the setup.
View 2 Replies
View Related
Jul 19, 2010
I'm trying to use a slip-streamed copy of win xp pro to install xp home onto a new hard drive for a friend while using his xp home product key. I thought that xp home would extract the files unique to xp home from the xp pro install because I used the xp home product key. The reason I'm using the xp pro slip-stream is because my friend bought the computer with xp home pre-installed and didn't get a install copy on the o.s.
View 1 Replies
View Related
Jan 9, 2005
Would a moderator please pass this post to a discussion forum as it has been accidently placed in a forum where it was originally going to be a question, and i do not know how to change to the desination forum.And another newbie messes up the hdd, with an old pc having being upgraded to xp home sp1, i wanted to clean it to start from scratch.Downloaded killdisk, boot-iso-hd.iso, eraser etc - and not exactly knowing what i am doing, tried the boot.iso (did not work), used killdisk and both of my disk (master 20GB and slave 1.2GB 'cleaned'), then oops relised that i could not boot for the CD-RW drive with the xp home sp1 disk (not a recovery but a OEM), so i attempted to get somewhere with a win 98 boot disk and could run fdisk.exe, but could not get the format.exe to work, so i downloaded the 6 floppy disk version and got to install xp home sp1, when i inspected the disk - remember it is a 20GB disk, i noticed that when i defragged it had now become a 2GB disk.so i have had to run killdisk again and re-installed the xp home sp1 data (which now shows the full 20GB). for those who ask questions on the site is there a simpler way of doing the clean that does not throw up these little annoying errors and would it be better to have instructions for these in a seperate forum for doing the disk cleans, reinstalls, driver issues(.dll), standard downloads for recovery programs etc to help those who so kindly help deal with the more complex issues.
View 1 Replies
View Related
Aug 29, 2007
Put a clean install on a computer and it runs great. Only one problem. Some pages when they open do not cover the whole scree like they should. This is hard to explain. When you open the internet the screen is as wide as if should be but what you bring up on the page covers about 2/3s of the page from the middle out. it leaves a couple of inches on both sides. It shows the scroll bars and all its the picture that comes up. If you click on the zoom and make it like 125% it is just right but how can you keep it there? Everytime you change pages you have to use the zoom again if it is the same way, not all pages are like that, but some are
View 2 Replies
View Related
Aug 20, 2006
I got a new SATA 320 GB hard drive today, since my other one died. I setup the drivers for it with help of the Windows XP disc, and start to install Windows.
I get to the part where I enter the product key, and I get a prompt that it is invalid. I have entered the key at least 40 times to make sure I haven't mistyped it. I have looked at the Windows Support page and search around
View 3 Replies
View Related
Jul 11, 2006
My Dell 1.4 8100 came with Windows ME. I have since added another hard drive, more Rambus memory (thanks for your kind words) and installed XP sp1 Home upgrade. Later I installed SP2 as well. I would like to do a CLEAN install of XP, but it doesn't seem to want to boot my upgrade disk or my ME disk. When I did RUN, it wouldn't let me install SP1 over SP2. Would uninstalling SP2 help?
View 18 Replies
View Related
Nov 6, 2008
An XPS M1530 and I want to install XP, preferably with the option to dual-boot Vista. A friend of mine installed Vista Pro on his dell desktop. The computer originally came with XP, so he gave me his product key to use for my laptop. If that works,i'm a little concerned about finding the correct drivers for it. Will the same drivers work? Also, to dual-boot means i have to partition my drive. Unfortunately i really don't know how to go about doing that, nor do i know what would be good sizes for a 320GB Hard Disk.
View 8 Replies
View Related
Jan 1, 2009
I had an ingenuine version of Windows installed so I had decided to just install a genuine one after Microsoft had bugged me about it. The bad OS was XP Pro and I was supposed to have XP Home, so I had to do it the hard way. I decided to install XP Home then over everything I had. I copied/installed the important things I had backed up (not much). This was a few days ago. Everything was going well until yesterday I got a problem. I had just installed SP3 when it told me to reboot. I rebooted but I get an error before it's about to start loading my desktop. The error lasts for about half a second before the computer reboots and repeats the process endlessly. The error says "A write operation was attempted to a volume after it was dismounted." with "lsass.exe" in the title bar. The same thing happens if I boot in safe mode as well. Also, my computer is a Dell laptop, Inspiron 600m. What am I to do?? I really do not want to have to do that all over yet again just after having everything nearly set back up perfectly. Help!
Thanks
View 9 Replies
View Related
Aug 10, 2007
I have an HP dv1000 laptop that came with XP Home and am looking for ideas on how I can get the drivers out of it before I wipe it and install XP Pro.I haven't done one of these in a while and at least I know for sure that the drivers for laptops must be similar or the same as the original. The system may work with generic drivers, but is there an easier way than to update the drivers one by one?
View 12 Replies
View Related
Apr 1, 2006
I have successfully completed a repair install but not all of the old user accounts are accessible using windows explorer. Two accounts plus the old administrator account show 'Access Denied'. I would like to retrieve the accounts' files and know the old passwords. I can't even delete them.
View 2 Replies
View Related
Feb 9, 2008
My friend earlier today installed Windows XP Home full install (an OEM version we found out later), now he cannot connect to the internet. His ISP provider said he needs "network drivers"...my question...where does one get these "network drivers"?
View 14 Replies
View Related
Oct 18, 2007
I had to install new hard drive.The only way out now, is to install a brand new copy of XP Home or Professional.I do not need the box/manual etc so I thought I could buy a cheaper copy OEM. But when I went to Amazon it said the OEM was not for a consumer, only system builders.Can anyone explain what problems I might encounter if I installed a OEM version (as funds are very tight - OEM would help out a lot).Or does anyone know of a version of XP that you can buy without the box etc (just the CD), that is for a home user.One other question - will my motherboard except a new version of XP(does it know that I am changing the "Product Key" etc).
View 7 Replies
View Related
Sep 29, 2006
On trying to install windows, all the file copying went well. Restarted my computer, and windows ran finishing up the second half of the installation.Then, I get an error that states the following:Fatal Error:One of the components that Windows needs to continue setup could not be installed. Installation Failed: D:ROOTXPHO1386asms. Error message: Data error (cyclic redundancy check).If it is just a CD error, is there any way to download a Windows XP Home OEM and burn it to a disc and run it from CD-ROM? Or can I try copying the CD and see if it fixes the error? Or are there any other solutions that I am not seeing?
View 3 Replies
View Related
Oct 23, 2008
I have tried three times to install SP3, (winxp) mob asus M2V-MX, cpu AMD Athlon (tm) 64 x2 dual core processor 4400, each time I get right to the end of the install and it says access denied, I disabled my anti-virus and firewall and tried to install it in safe mode,
but I still get access denied, and each I have to do system restore to my pc to get back to how it was
I got in touch with microsoft and this what they want me to do, but to be honest I don't trust them I don't want to mess my system up, so would you please have a look at what they have sent me.
View 10 Replies
View Related
Jun 3, 2006
i have been using my OEM version of XP home for the past few years,have reformatted my HD a few times and used the cd to reinstall it without trouble yesterday i decided my computer needed another reformat, so i did so assuming that the installation would work. now every time i enter in the cd key (the CORRECT one that comes with my LEGIT version of xp home), it says my product key is invalid.
View 10 Replies
View Related
Aug 10, 2009
Install windows home edition on my dell laptop or do I have to buy a dell specific disk.
View 1 Replies
View Related
Nov 8, 2009
Decided to do the semi annual reinstall of XP after boot time got up to 9 mins and shutdown got to 5 mins.So nothing was really broken.Its a no-brand desktop machine based on GA-M55Plus motherboard. Have a main disk SATA II and two more in a Raid-0 array.Prior to starting had reassembled the latest drivers for motherboard, video card, printers, mouse etc and put on a USB stick..Disconnected the Raid array, blew away the partition on the main disk and installed XP from original media (which has SP2 included)
All went pretty smoothly but after about 6 hours started getting BSOD - its still too quick to read KERNEL something.along with the advice to uninstall recent additions / drivers etc.This happens after a few minutes or a few hours.Well the last thing it did was 71 updates from Microsoft!! (Including the cursed IE-8 which had previously caused grief on this machine)I can think of two things that have changed since before.
1. the 'latest' drivers
2. the order things were applied
Can you help with any advice as to the order things should be installed.
Whilst waiting for MS to get around to delivering updates I was installing the drivers etc. Starting with the chipset and video drivers.So is it best to wait hours to days for MS to deliver all the junk? (without the mobo drivers its a bit average)Can you get an image of XP with SP3 included - better yet all the 71 other vitally important updates? Do you think it would help to wind back the auto installed updates and try and get them in small chunks?(and why cant you download once and use many times!)
View 1 Replies
View Related
May 9, 2010
I just did a clean re-install of windows xp home edition and I cannot go to any microsoft site. I tried going to start menu then clicking windows update but it comes up page not found. I have tried both IE and Firefox to go directly to microsoft's website to get service pack 3 and all the updates but it won't go to any microsoft website. It just comes up page not found. What could be causing this?
View 5 Replies
View Related
Feb 9, 2009
Mobo is Biostar p4m90-m7c fe
Bios finds 320G SATA drive fine.
Put Win XP HOme (original version from wayyyyyyy back) in cd=drive. XP boots from disk and sees the drvie but ONLy as 130 or so Gigs. I realize this is a limititation of xp prior to all the service packs, but how do I get around it? BTW there is no Floppy in the computer (none of my puters have working floppys!) I thought I'd be tricky and installed the disk to my other winxp machine and formatted the drive into a 40G and 280G partitions both primary the 40G first. Retried the new machine and it didn't recognize the partitions and listed only one unknown drive of about 130 gigs.
Looked int he bois and didn't see a setting for ide/raid for the sata. I've read where you can F6 durring the install and load additional drivers but all those post linked to external sources for key information and those links were dead. How can I get around this limitation? If I need to load drivers during the install I assume I can burn them to a cd on my other computer and f6 during the install to load them, but what drivers am I looking for if this is the way to go? If not how can I get all of my drive available. I did try simply letting install format the 130 partition hoping that when I finished the install the rest of the drive would show up as unpartioned but that didn't work out.
View 12 Replies
View Related
