I'm having a Windows installer problem that is giving me fits. I've tried everything I can find on line and nothing has worked. I'd like to do a repair install, but the only software I got from Dell will wipe out my system and restore it to it's original state. Since I've got the license for it that came with my computer, can I get an XP Home install disk somewhere I can use to do this? I'm assuming it's legal to do this - am I wrong?
View 8 RepliesI have two computers, one I use for gaming, the other for school. Both computers had 60gb Maxtor (school with lots of room, gaming with about 10 gb free). My school HD took a powder (the evil clicky noise of doom), but I was able to back up my files prior to that. Me being a quick thinker, I decide to upgrade my gamer puter to a 120gb (don't wanna go too nutso, as I am considering building a much superior computer), and put the good 60 gb in my old Athlon 700. Problem? I cannot get Windows XP Home to complete install on my gamer computer. (Athlon 700 installed just fine with 'good' 60gb).Gamer Computer: Athlon 1800+, 512MB DDR Ram 2100, KR7A Raid MOBO, GeForce3 Ti 200 (128MB DDR RAM), SB Audigy 2(AGP).
It is a RAID mobo, but i do not use the raid functionality, I did not have a problem before(I have my HD and my 2 roms on ide now). I go through the install steps, and I get to the very very end, where it states you are about to start Windows XP, and then it hangs, and thats it.I have tried to ensure there are no conflicts, I pulled out my sound card as well as my network card, and 're-seated' my video card and RAM. I have tried looking at using a winxp bootup floppy, booted into safe mode (the only error it detects is the missing RAID, no conflicts detected there). Heck, I even swapped out mouse and keyboard. I tried putting back the good 60gb back in the pc, and reformatting, but still get the same thing(sometimes the screen is black, sometimes the icky blue of xp, but that's it).I have no idea now. I did make sure that my bios was up to date before taking down the system originally, and it was, so no change was made there. Even swapped out the ribbon cables to ensure nothing was damaged on original removal.
I recently re-installed an old copy (4 years) of winxp home 32 bit (after my sp2 disks were giving me trouble.) There are 3 320gb hd's and 2 36gb raptors. I actually chose to install winxp home on one of the 320's but a couple of odd (to me) things happened. First, it formatted the 320's into two partitions, 1 equal to the other. I did not notice this at the time (I was in a hurry.) My winxp pro sp2 disks never did this. Second, it installed winxp on c: as I wanted but then it has "(System)" on e: (another 320gb split in two.) I found this in the disk management section.Frankly it runs great, but there are no files to be seen on the e: drive. I back up my c: drive regularly and I am wanting to know if something will be amiss with the backup because that (System) disk is on e?I've just never seen this "(System)" disk thing before.
View 2 Replies View RelatedI recently formatted my drive and am trying to reinstall my WIndows XP Pro.When I put in the CD and the PC starts up I receive a message: "Invalid System Disk. Replace the disk and then press any key"I have already changed my BIOS so that it boots from the CD first. Not sure what the problem is? prior to that error message, it states that I should "press any key to boot from CD"...when I try to push a key nothing happens. I know my keyboard works since I used it to enter the BIOS.
View 5 Replies View RelatedI have been looking on Ebay at used/refurbished computers for upgrading from my current and older P4 chip computer. One that I'm looking at says that it has a (legal and genuine version) of Windows XP Pro SP3 o/s installed on the custom built computer, but there's no disk. If I were to purchase a computer like this, and make a back up copy of that installed o/s on my own disk, will there be any difference than if I had received the original installation disk or manufacturer's restore disk?.....or would the installed (and backup) o/s be considered an "unlicensed" copy?
View 2 Replies View RelatedI can't get into xphome sp2 with the os disk. At this point i would just like to save my fathers mail. I have ultimate boot cd, but don't really know how to use it. Any suggestions would be great. I also have file retrieval software.
View 1 Replies View RelatedI initially posted a question regarding the installation of SP2 about a year ago, and recently have had a reason to think once again about installing SP2.I have the disk from MS, from about a year ago, never installed.Has anything changed in SP2 since theI'm getting broadband soon and think I really need to take the plunge and install it, and was wondering if there has been any changes good or bad about it since then.I can reference my old append on what to do and how to prepare for installing it.
View 3 Replies View RelatedIf I lost the disk that came with my PC, can I use any XP home disk and the product key on the side of the PC to reinstall?With out getting in any trouble?
View 3 Replies View Relatedi got vista can i used the xp disk that i got for the dest top pc 4 a laptop
View 1 Replies View RelatedI ordered a replacement disk from Compaq some months back as a replacement. Of course that one went to the customer; but, I copied it. I labeled it with a Sharpie, "XP for Compaq", but didn't distinguish it as Home or Pro.How can I look at the files on this disk and tell whether it is Pro or Home?
View 3 Replies View RelatedWhile I wait to see if I get an answer on how I can fix my current problem, thought i would check on how I might completely relaod computer, just in case I don't get a fix. I have a HP Pavilion P3, it originally came with Windows ME, at a later date i installed an upgrade to Windows XP Home Edition. I have the original 3 disks (2 ea system recovery, and 1 application recovery), I also have the original XP Home upgrade disk with product key. I have already tried this once but it would not work-- I inserted disk 1 (hp system recovery) and booted the computer, after only a second or two the screen went blue and informed me the hard drive could not be found. I thought maybe it was because I was not using ME, so I installed the upgrade disk and booted. It began doing its thing then after loading several files it informed me of a windows error and it shut down windows.
View 7 Replies View RelatedFor Disk Defragmenter (Windows XP Home Edition)CLSID:{43668E21-2636-11D1-A1CE-0080C88593A5}.
View 8 Replies View RelatedI think that the recovery disk that come with the computer is damaged in some way. When I reinstalled XP Home, since I bought a new motherboard, there would be files that couldn't be copied to the computer. Everytime I reinstalled it, there would be different files that would not copy.
View 4 Replies View RelatedI have a real XP Home cd key thats really old, and I finally managed to find a real XP home (SP2) disk. i never got one with my old computer. now i just reformatted my harddrive and am trying to install it. however, the computer wont let me pass the part where i enter the key. it keeps on saying that the key is invalid
View 2 Replies View RelatedIn using Ghost 2003 to make a copy of my HD, (and I tried twice) I got (both times) the message that a range of sectors (some 64 consecutive) were damaged. The destination disk was brand new and I may need to return it.)But I first thought to run Chkdsk, but found that without my recovery disk (that's the one that has my XP on it, right?), only the primary drive would be checked. Tfhe notice read: "The chkdsk command with the parameters listed below is only available when you are using the Recovery Console. The chkdsk command with different parameters is available from the command prompt.
View 14 Replies View RelatedI just recently noticed when I went into control panel administrative tools computer management that my disk management add in/snap in is missing information.It should show me my drive numbers and more. Also there is no right click options when I try to use them on the partitions.Check the picture attached.Probably a microsoft tech would know the answer.
View 9 Replies View RelatedHave new build but can't install OS using Gateway install disks have PC with the followings P5KPL-AM SE motherboard
-Intel dual core E2200
-2 gig ddr2 memory
-40 gig IDE hard drive (wiped clean)
(have Gateway install disks for Windows XP Home with key # and coa sticker taped to jewel case)
-Sony CD-RW (CRX230AE)
-5in1 card reader
**NO floppy disk drive
my old hard drive crashed and i got a new one.I have a vpr matrix computer i used the restore disk on the new hard drive. it loaded fine. but when i did the restart it would load the xp screen then the cpu would restart. i have no idea where to go from there. i tried to reinstall xp. from there i have no idea what to do.i know from the description i gave i will prob need to give you more info. anything you need just ask and i will try too find the answer.
View 13 Replies View RelatedI know it was here at my last login, but Disk Cleanup is no longer listed in Programs>>Accessories>>System Tools, and the shortcut that I had placed on my Desktop is gone as well. This is the second PC on my in-home network, running XP Home edition, that this has happened to within the last 9 months - I have Norton Internet Security (all current and up to date) on all three boxes - anybody know what 's going on?
View 4 Replies View RelatedI cannot seem to install SP2. Every time I try, it freezes up somewhere in the middle. I just tried last night, and it never made it past the first message. Something like "Initializing installation". It doesn't sound like the hard drive is doing anything. When I try to cancel the install, it will then freeze on the "Cancelling Installation" message. The only way out is to "End Task". The furthest I got was one time when it seemed to finish installing, but when it rebooted, my system was at 640 x 480 resolution, and still at SP1! I then ran a System Restore and got back to where I originally was, minus a bunch of security patches, even though the point I restored should have already had those patches
Notes:
-When trying to install, I let it run OVERNIGHT, so it has plenty of time to work.)
-System is clean of Spyware, Viruses, etc.
-System performance is pretty good, although I do get an occasional blue screen, hence the reason I'm finally trying to update.
Does anyone have any idea how to troubleshoot this?
All of the SP2 install guides at windowsreinstall.com link provided in the sticky state that XP Home CD is required, what if I don't have one, I have a Dell-provided "reinstall" CD for XP. Can I still use the same procedures to upgrade to SP2
View 5 Replies View RelatedHi folks, I sure could use some help pretty quick. I bought an upgrade version of Xp Pro on Ebay, looked great I got the holograph disk and all, with original manual etc. Microsoft says its not a genuine copy. Now I cannot find my receipt or any info on this to follow up on. So now I need to uninstall XP Pro and re install my XP Home version.I need help how to do this so I can be legal again and get updates. I cannot afford another copy of XP Pro.
View 5 Replies View RelatedI've been using XP Home with IE 6 and SP2 for a long time. I read a long time ago about people having problems after installing SP3 so I never did. By the way, I do not like IE7. Is there any good reason why I should install SP3 if I plan on staying with IE6?
View 4 Replies View RelatedReformated and reinstalled windows xp. after instalation finished.i noticed i actually have 2 versions of xp home on my harddrive, how do i remove one without it effecting the other? i did this once before thur the reg ( i think) but i cant remember how.
View 1 Replies View RelatedI had windows SP2 on my Compaq Presario SR1123WM before it crashed and went back to California for repair.I still have the CD to install the program.But it will not install, either from download from microsoft, or from the CD.I get an error message " Extraction failed.(ccyclic redundancy check)" And a few minutes later, I get the screen, " SP2 did not install," or some such thing. Anyway, I have tried 14 times to install this thing, but Microsoft tells me that Compaq is responsible, because it was OEM installed.
View 5 Replies View Relatedi had to reformat and install all new xp home every things working except i cant set home page to what i want.
sp2 all security updates virus free and spayware free
I want to put the original XP Home disc back on my computer to replace the XP Pro already installed. I get a message saying that the one I want to install is older than the one being currently used and that all settings will be lost. How can I safely install the old operating system (XP Home) without losing my data or installed software applications?
View 9 Replies View RelatedI have never had this problem before but I am trying to do a fresh install of windows xp home on a dell dimension 2400 desktop. I deleted the current partition and then continued with the install. The computer is only currently at the "Installing Windows" portion right now and I started it at 10am this morning. So at my time it has been 7 and 1/2 hours so far. Its not frozen either. Does anyone know why it might be taken so long to install?
View 14 Replies View RelatedI've had several instances where my system loads the devices from theWIN XP Home Oem CD-ROM and then when it gets to "Setup IS StartingWindows," the system hangs and doesn't continue with the install. I have no OS on the system to check any of the drivers/applicationsrunning other than the setup.
View 2 Replies View RelatedI'm trying to use a slip-streamed copy of win xp pro to install xp home onto a new hard drive for a friend while using his xp home product key. I thought that xp home would extract the files unique to xp home from the xp pro install because I used the xp home product key. The reason I'm using the xp pro slip-stream is because my friend bought the computer with xp home pre-installed and didn't get a install copy on the o.s.
View 1 Replies View RelatedWould a moderator please pass this post to a discussion forum as it has been accidently placed in a forum where it was originally going to be a question, and i do not know how to change to the desination forum.And another newbie messes up the hdd, with an old pc having being upgraded to xp home sp1, i wanted to clean it to start from scratch.Downloaded killdisk, boot-iso-hd.iso, eraser etc - and not exactly knowing what i am doing, tried the boot.iso (did not work), used killdisk and both of my disk (master 20GB and slave 1.2GB 'cleaned'), then oops relised that i could not boot for the CD-RW drive with the xp home sp1 disk (not a recovery but a OEM), so i attempted to get somewhere with a win 98 boot disk and could run fdisk.exe, but could not get the format.exe to work, so i downloaded the 6 floppy disk version and got to install xp home sp1, when i inspected the disk - remember it is a 20GB disk, i noticed that when i defragged it had now become a 2GB disk.so i have had to run killdisk again and re-installed the xp home sp1 data (which now shows the full 20GB). for those who ask questions on the site is there a simpler way of doing the clean that does not throw up these little annoying errors and would it be better to have instructions for these in a seperate forum for doing the disk cleans, reinstalls, driver issues(.dll), standard downloads for recovery programs etc to help those who so kindly help deal with the more complex issues.
View 1 Replies View Related