Administrative Username-password - Application Error
Apr 24, 2008
Today when I tried to reboot a Windows 2000 Server box it proceeds through the startup process VERY slowly and when it finally gets to the login box and I enter the administrative username and password that has always worked in the past, I get the following error:userinit.exe - Application Error The application failed to initialize properly (0xc0000142). Click on OK to terminate the application.When I click OK the desktop will not come up and the server is useless. I have seen some other information about this error, but most of them assume that the computer is accessible. I have not been able to get to a desktop normally or through any safe mode options.
View 11 Replies
ADVERTISEMENT
Jul 11, 2005
had to install xp home over xp pro. all the files and user folders that were there before i did this are still intact,but.............. when i push control alt delete to bring up the administrator that works but when i go to type the administrative name and password it tells me cannot log me in. is there like a default password(did not have to type one in when i installed xp home,just a name and company)or some way to find out what it is
View 1 Replies
View Related
Mar 26, 2009
How can i retrieve the administrative password on my computer
View 2 Replies
View Related
Apr 22, 2006
When I log into a website the computer is not asking me if I want the computer to remember the password and username so that I don't have to type it again the next time that I visit the same website! The problem is only in IE cause in MSN explorer is still asking me.
View 2 Replies
View Related
May 12, 2005
When I Turn The System On It Asks Me For A Username And Password Ive Tryed To Diable This But There Is No Op To Do This.
View 5 Replies
View Related
Jul 4, 2005
Is there a way to prompt a user to key-in his or her username and password when open a share folder within a workgroup?
View 1 Replies
View Related
Feb 17, 2008
I changed from a domain to a workgroup on a work computer that stays at home, but remotely access the network via the internet. I had to reboot, however it turns out the account I was using is on the remote domain, so I cannot log in. I don't have the administrator password, and would like to somehow set the domain back to what it was earlier so I can log in again. How would I go about doing this?
View 3 Replies
View Related
Aug 15, 2008
i keep getting a box up saying the server is requesting username and password to be sent in an insecure manner (basic authentication without a sure connection)
View 10 Replies
View Related
May 28, 2006
The problem is kinda silly, its a full version of windows xp pro, validated (i must be one of the only ones i know with 6 original xp pro licences in the house lol) fuly upgraded and including .net.Is it possible to get windows xp professional to auto log in, bypass the usename password, see the ATI wonder remote control software doesn't kick in till the desktop appears so I always haveto walk across and use the mouse to log in.
View 4 Replies
View Related
May 4, 2008
I recently brought an old laptop from work to my home to use as a kitchen computer. I already have an existing workgroup and wanted to change the computer from my office domain to my home workgroup. I went into control panel and took it off the domain and put it on my workgroup. I went to start it this morning and I am unable to log in. XP asks me for a password and I try to enter my old office password and it doesn't log in. I tried logging in as Administrator w/ no password, as "kitchen" with no password, and without any username or password at all and none of them let me log in. How do I get back into my computer?!?!?!?
View 10 Replies
View Related
Jun 24, 2005
When you use any Windows plaform (XP, 2000, NT4, 98...) to logon to domain,the logon dialog box always shows the username and domain (last successfulattempt).
Is it possible to clear the username (so username and password field are empty when next logon)?
It is because we have some computers that shared by many different users. I don't want to let them know who was the last successful logon
View 1 Replies
View Related
Aug 28, 2005
I need to reformat the entire computer. It's an old laptop that was used for business and therefore has all of these programs on it that I do not want anymore. Things like asking for a username and password at startup. I know you guys may say "boot from the XP CD" but will this erase EVERYTHING? By the way, I do want to erase everything.
View 1 Replies
View Related
May 29, 2007
I have never had a password set up on my computer (XP home edition) and one day the computer requested a username and password at logon (never had a logon screen pop up). I was in the middle of loading mcafee, which seemed to be the beginning of the problem. I do not know how to get around this. I have tried safemode, but the computer still asks for a username and password for safe mode.
View 6 Replies
View Related
Jun 15, 2005
I have installed a MS Fingerprint reader so I would stop having to type in usernames and passwords to all different sorts of web sites. The fingerprinter work - except that it seems that it scans my finger as soon as I put it on the pad (I hear the sound confirmation beep) - but then it takes like 7 - 15 seconds beofre it actuallly populates the web username and password, and then submit button. I can type in the username and password faster than using the fingerprint reader?
View 10 Replies
View Related
Sep 17, 2009
My XP Pro machine at work has recently started running extreamly slow on bootup. It runs fine up to the username and password window, but as soon as i sign in it then takes atleast 15 min before i can use it. I have a PF usage of 2.24 gig during this time and my HijackThis details are below:
View 12 Replies
View Related
Jun 6, 2008
My PC has started to go very slow when starting up. It's normal up to the user password, then MSN Messenger starts, and then it just sits there for around 90 seconds. During that time I can start Task Manager, but there is nothing obvious in there. Heartbeat is still going and processors are very low usage. In the system tray, it looks like my webcam has started, but Kaspersky AV does not start until it un-freezes. I can't start anything as the pointer remains an hourglass.
View 1 Replies
View Related
Jun 9, 2005
I've reinstalled my computer with Windows XP SP2 instead of Windows 2000.I used to have a "remember username and password" in Windows 2000 that I no longer see.For example, when I now log in into MS Messenger, I need to reenter username and password with each login, and the check box that I used to have in W2K is gone.Another example, is web sites. I have username and password for certain web sites. Now that the check box is gone,I need to reenter the credentiald with each log in.In the new login windows, there is only a drop down list with a user icon next to the username field.But this drop down list is empty.
View 14 Replies
View Related
Dec 8, 2004
Im getting this message when trying to restart windows XP. i get it even when i try to enter into safe mode. If I click on either option it restarts the machine. I cant even get access to the safe mode of windows
"Application error: Winlogon.exe. Click ok to close or cancel to debug."
View 2 Replies
View Related
May 4, 2010
I get INST32.EXE Application Error Box with Message Application failed to intialize (0xc0000006) Click Ok to terminate . push OK twice to remove box. I am trying to load my Printmaster Platinum 7.0 or 8.0 and neighter will load. I have been trying to get this fixed for over 3 weeks. Nothing I have found will work.
View 15 Replies
View Related
Apr 25, 2007
tmproxy.exe- application error it says the memery can not be "read"
View 1 Replies
View Related
Feb 28, 2009
The Instruction at "0x75606eb5" referenced at "0x00000008". The memory could not be "read".Click OK to terminate the program.I keep getting these messages all the time but the numbers keep changing. it started when i my sister started typing something. the day before she had also spent all night typing. now i get that message for everything.Don't know what to do. I tryed disabling automatic updates and then updating it manually on website but when try i get redirected to Google.
View 53 Replies
View Related
Jun 19, 2005
After using Windows Explorer to view files and folders I get the following error message:Proxy Desktop - explorer.exe - Application error.The instruction 0x01f24213 referenced memory at 0x018dad58. The memory could not be "read". Click OK to terminate the program.I am using Win XP Home Ed with Service Pack 2 installed on a Dell Dimension 8200 with 512 MB memory. What is the simplest course for recovering from this problem.The program seems to work anyway.
View 6 Replies
View Related
Apr 25, 2006
Explorer doesn't load it just stops and when i close it i get this message.The instruction at "0x1001cd11" referenced memory at "0x1001cd11". The memory could not be "read".
View 7 Replies
View Related
Sep 21, 2007
I'm getting this error massage for a few days. It says:The instruction at "0x7c9111de" referenced memory at "0x00720065".The memory could not be "read".
View 9 Replies
View Related
Aug 22, 2007
Good morning, I have a couple of problems and I can't figure out how to get my computer back to where it used to be. I think it has something to do with updating windows. I get messages everytime I try to open a photo or a file. One message is Explorer EXE-Application Error, The instruction of ox600470a4 referenced memory at ox600470a4. The memory could not be written. Click on ok to terminate the program, click on cancel to debug the program. I clicked on debug and the program I got a message about Dr. Watson trying to communicate with ? and I clicked ok. Then the photo closed and all the icons disappeared and the reappeared. When I opened the same photo again, I got the following message. Data Execution Prevention-Microsoft Windows to help protect your computer, Windows has closed this program and also Windows Explorer has encountered a problem and needs to close, etc. Again the program shuts down. Basically, I can't open anything without the error messages. I can't copy cd's either as I have in the past with Nero. The program starts and then I get a read message or the cd just will not copy. Is there a way that I can do a restore and have my computer back to where it was 3 weeks ago? I could do that with my old computer Windows 98se. I have a HP Media M7060n now and I have XP home edition. Up to now I have had no problems. This computer is very different from my old one and I have no clue how I would do a restore. I just want a restore from 3 weeks ago, not a complete restore. I think the problem has to do with a windows update. I think I did one just before these problems occured. I lost my virus protection and had to reinstall it. I thought maybe that was the problem so I uninstalled it, but that wasn't it. So..here I am very frustrated. I know this post is long and I apologize. Thank you~Liz
View 6 Replies
View Related
Jan 8, 2008
Windows XP Media Center Edition Ver 2002 Acer Aspire e360
12/3/2007 10:26 AMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16544, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 6:28 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/28/2007 7:32 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:49 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:55 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
12/30/2007 8:56 PMApplication ErrorFaulting application avant.exe, version 11.5.0.0, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/1/2008 9:08 PMApplication ErrorFaulting application firefox.exe, version 1.8.20061.20418, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 10:17 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x00018fea.
1/3/2008 4:46 PMApplication ErrorFaulting application iexplore.exe, version 7.0.6000.16574, faulting module ntdll.dll, version 5.1.2600.2180, fault address 0x0002ae22.
View 5 Replies
View Related
Sep 7, 2006
I get one option "OK" i click on that, and I automatically re-boot. I'm returning this error when I boot:
SAS window winlogon.exe application error
View 4 Replies
View Related
Feb 18, 2008
I get the following error evry time my Windows XP Media Center PC boots
winlogon.exe - Application Error
The instruction at "0x0101050c" referenced memory at "0x117e4000". The memory could not be "read". Click OK to terminate the program Click CANCEL to debug the program When I click either the system reboots and I'm stuck here. I cannot get it to boot in safe mode but I can boot to a DOS prompt in the Microsoft Windows Recovery console.
View 2 Replies
View Related
Aug 2, 2008
I just got hit by a virus, it's all gone now. But one thing, it still messed up rundll32.exe and userinit. I cannot log in without, having to press control+ alt+delete, file, newtask, explorer.exe
View 1 Replies
View Related
May 17, 2008
After having the comp for a week or so (got it from a friend for cheap, in perfect condition) any time i try opening a program such as Word, the Open With screens pops up, and i have to find the program manually and open it. when try to open anything in the control panal, such as add/remove programs, an error pops up that reads:
C:WINDOWSsystem32
undll32.exe
Application not found
View 10 Replies
View Related
Sep 23, 2004
I just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
View 1 Replies
View Related
