Non Starting - Missing Windows System32configsystem
Jul 14, 2007
My computer refuses to start telling me it is missing windows system32configsystem and suggests I start setup and type r to repair.I have done this and get a menu of commands which I dont have any idea how to use.
I would be grateful if someone can give me step by step instruction on how to proceed.Instruction to do this followed by do next would get me through but it may help me in the future if an explanation of each step is given
View 9 Replies
ADVERTISEMENT
Nov 1, 2007
I'm un able to restart my laptop, i get this message and it say press " r" for restart. I used the microsoft doc 307545kb but was unsuccessful this is what I did:md tmp
View 4 Replies
View Related
Dec 11, 2006
It's been a while since I had to do this so I'm looking for a little refresher here. Just booted up on my XP partition with the message: "windowssystem32configsystem file missing or corrupt please use 'r' for repair. I know I've got to go through the repair recovery, but I can't remember if I use the fixboot from the DOS prompt or fixmbr. Any suggestions or cleaner way to fix this would be greatly appreciated, I guess if all fails it will be back to the dreaded fdisk.
View 8 Replies
View Related
Mar 10, 2005
On startup this computer Windows (XP Pro) will not start because the file WINDOWSSYSTEM32CONFIGSYSTEM is missing or corrupt. Is there a way to replace this file?
View 14 Replies
View Related
Dec 28, 2008
I start up my laptop I got this message (which only lasts for about 2 seconds): Please select the operating system to start: Microsoft Windows Recovery Console, Microsoft Windows XP Professional. If I don't choose anything in the two seconds, it automatically chooses Microsoft Windows XP Professional, and boots up regularly,previously . I booted it and this message same up after the previous screen, asking me to choose a way in which to start up my machine from the following options:
Safe Mode, Safe Mode w/ Networking, Safe Mode w/ Command Prompt Last Known Good Configuration (your most recent settings that worked)Start Windows Normally No matter which I choose, I get this error message: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select "r" at the first screen to start repair. I don't have the original Windows Setup Disk
View 13 Replies
View Related
May 29, 2008
When I turn on comp. get the mssg: Windows couldn't start following file missing <Windows root>/system32/hal.dll Reinstall copy of file Recovery does not work. Tried to boot from a cd (changed BIOS to cd as 1st boot device) with win xp setup boot disk downloaded from MS site. Get same error mssg.
View 6 Replies
View Related
Mar 25, 2007
For about 2 months my computer (Sony VAIO desktop, Pentium IV 1.39 mHz, 512mb RAM, Windows XP Pro, SP2) has been acting strange. I have checked the system for viruses and spyware with AVG and Symmantec and others- with no luck. I also did a Windows repair; it only got worse. I also used reg scrub.First, when starting up it gets hung up at "Windows starting up..." taking about 3 minutes to finally get to the user selection page. Once I login, it takes another 2minutes to fully open up. At that point, my mouse has a constant flicker and takes forever to open up IE (6.0). If I leave the computer for awhile, when I come back and move my mouse to wake it up- it has some new problems: I cannot type in numbers (num lock has no effect), when I type letters, they are in all caps (caps lock off), and when I go to my desktop to select a program to start, it highlights all of the icons and says basically "do you really want to start 38 programs at once".
View 11 Replies
View Related
Aug 23, 2007
windows could non start because the file windowssystemvgaoem.fon is missing or corrupt.
View 2 Replies
View Related
Sep 12, 2007
I just recently installed windows xp home, and the computer freezes on "windows is starting up" screen for like 10 minutes. there's no malware and everything seems to be fine.
View 1 Replies
View Related
May 22, 2010
Got Vista Home premium installed on 1 HDD installed another HDD trying to install XP boots from CD goes into setup stage loads all drivers gives message at the bottom windows is starting up and then Blue Screen Of Death Gives error stop code:0x0000007B.
View 5 Replies
View Related
Dec 8, 2005
Im running windows XP Pro. upon starting the computer, when it gets to 'Windows is starting' screen, I'm made to wait at least some 3 minutes before I get to the Logon screen.
View 2 Replies
View Related
Sep 11, 2008
My laptop becomes very slow while shuting down & starting windows can any one help me.
View 3 Replies
View Related
Oct 7, 2005
I did a reinstall of windows xp, but now at my "windows is starting up" page it takes forever for windows to load.
View 4 Replies
View Related
Jun 8, 2008
I can't get XP Pro to get past "Setup is starting Windows" ,to allow me to format.Loads all drivers up to that point,then the error in above post.Pressing F6 or F10 to install 3rd party(XFX MB drivers) has no effect,and Alt-F2 ultimately gives error also.S prompt is no joy also.Tried F8 for Safe Boot and no joy.Cleared CMOS several times.All drives are there in CMOS. All RAM (4 Gigs) is detected I raised Memory voltage to 1.9 volts standard for my ram),and raised FSB to 1600 Mhz from 1333 (standard also).Put timings to standard 7-7-7-24T Tried Memory linked/unlinked/Auto/1T/2T I Tried only 1 SATA drive,and 1 Gig of RAM with 1 DVD RW /2 drives and 2 Gig of RAM,I Enabled standard RAID for each and every drive and ultimately disabled them cause I want the XFX 790i ultra motherboard RAID Drivers.
View 6 Replies
View Related
Jun 10, 2008
When i put in teh Win xp disc its starts loading teh file etc.. and then when done after i press enter and "Setup is starting windows" its freezes andi get liek A black dot and a few like patterns on the screen or soemtimes teh screen just goes mad liek with different colourd patterns but ontop of the blue "Setup is starting windows" screen ive checked teh disc and made a copy both work fine checked teh CD rom works fine put a diffremnt cd rom drive in and made no difference cant check ram because my computer doesnt take DDR2. ive put diffrent IDE harddives in with and without a SATA convoertor and the same thing happens with the "Setup is starting windows" also when i start the computer up before i boot from cd or anything after all that without booting from CD i get a BSOD code 0x07B.
View 8 Replies
View Related
May 13, 2007
I have a compaq presario 2500 laptop with windows xp home edition sp1 installed. I had left my computer at the desktop screen to go do something and when I came back avast antivirus had come up with a message saying that one of my files was infected with a trojan. i believe the file was stored in the system or system32 folder. anyways, it had reccomended me to move the file to avast's "virus chest", so I did. and i went ahead and worked on my laptop as normal. then after shutting my computer down and starting it back up later in the day, i found that my laptop would not load any further than the blue "windows is starting up..." screen. i let it sit there for about 30 mins. so then i went to my desktop and started researching my problem on google. i tried going into safe mode, but it still gets stuck at the same screen.
View 5 Replies
View Related
Feb 28, 2008
I have a hp pavilion a335w home pc, O/S Windows xp home with serv pack 1. This was pre installed when purchased. Problem: in the middle of using mcafee removal tool my system crashed when it rebooted I got this messege: windows could not start because the following file missing or corrupt: windowssystem32configsystem. My question is this, what is the best way to hopefully replace the missing file so I dont loose everything.
View 14 Replies
View Related
Oct 9, 2008
Win XP Pro, unknown SP. The computer belongs to a friend, Jo. Someone cloned Pat's HDD to an identical HDD, IDE, Western Digital. Upon boot, Jo was greeted with c:windowssystem32configsystem is corrupt. Problem onset after someone the cloning. As far as Jo knows, the source / original HDD was working fine prior to the clone.
copy c:windowssystem32configsystem c:windows mpsystem.bak
copy c:windowssystem32configsoftware c:windows mpsoftware.bak
copy c:windowssystem32configsam c:windows mpsam.bak
copy c:windowssystem32configsecurity c:windows mpsecurity.bak.........
View 12 Replies
View Related
Feb 19, 2008
I decided to uninstall COLDFUSION from my system I confirmed yes to all those popups that say "this file is no longer needed want to delete"? during the uninstall process. Turns out I wiped out some important .dlls that windows needs to start up correctly. I am hung up on a DOS screen that reads:
"Windows could not start because the following file is missing or corrupt: windows rootsystem32hal.dll Please re-install a copy of the above file. Where do I find the above dll and if its on the xp CD...where on the XP CD would it be?
View 14 Replies
View Related
Nov 24, 2008
My Compaq Presario C330EA is saying WINDOWSSYSTEM32CONFIGSYSTEM is missing or corrupt. Safe modes will not load up. BIOS will (F10), but I'm lost when it comes to that.It says insert Windows System Restore disc or something, but I don't have that.Usually I go to Start>All Programs and eventually boot the computer up in a mode where I select what I think is called 'destructive' recovery this wipes everything except what was on the computer out of the shop.
View 5 Replies
View Related
Sep 27, 2006
because the following file cannot be found or is corrupted: WindowsSystem32ConfigSystem The system is running Windows XP Home Edition. Will Windows Setup Repair fix this? Can I use a Windows Upgrade disk or do I need the disk for the full product?
View 7 Replies
View Related
Jan 5, 2008
When I start up my laptop, the screen immediatly says Windows could not start because the following file is missing or corrupt: windowssystem32configsystem.You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair. The deal is I dont have the cd. IF someone could tell me how to get an xp cd (without buying) that'd be great. I've looked in alot of websites about how to solve this problem but I can't find any solution to the problem without the cd. I can't bypass it by doing any of the F8 options. If it helps, I can access the Calpera DR DOS program.
View 1 Replies
View Related
Jul 2, 2008
I have an old system I am installing a new hard drive in and trying to install Windows XP Pro on it. It's the only hard drive in the system, a Western Digital 500GB SATA. The MB is a Intel D102GGC2 with a Intel Pen D processor. Windows has run just find on this system. Replaced the hard drive because could not boot the installed windows. That hard drive is no longer installed in the system.
I insert the Windows CD and the install process goes fine till it tries to start windows setup. It stalls at "Setup is starting windows"
View 14 Replies
View Related
Dec 29, 2005
I am trying to install xp on this good friend of mine's machine that took a dive last week. We replaced the motherboard, cpu, and memory. And afterwords for about 3 days, it seemed to function ok. Then it just quit booting. I told him we would need to reinstall windows. I was kind of shocked we did not have to in the first place. Anyways, So now I am trying to reinstall windows:I can get it to boot from the windows cd, it goes through the standard list of drivers, and at the end says, "setup is starting windows"... Then it just hangs there indefinately. Typically after this, you get to the screen that asks you if you want to install windows, then you hit f8 to agree to there stuff, then you get to partition ect. I mention these things so you will know what part I am talking about.
View 5 Replies
View Related
Oct 5, 2009
Im installing Win XP Pro (SP2) on a HP Pavilion zv6000 laptop. Everything runs fine until I start installing windows xp. The cd boots and the "Setup is loading files" goes through but then stalls at "Setup is starting windows". Waited for 2 hours just in case and still the same results.From what I can gather this points to a hardware problem. I have tried different ram modules and removed the battery but all to no avail.Could this be a processor or motherboard problem? I did everything the person above me did and then I took the hard drive out, reformatted it and tried installing XP SP2, Windows Home and the recovery cd supplied by HP. Every time it is gets to "Setup is Starting Windows" it freezes. I know the hard drive is working since I tested it in another computer. The reason I needed to reload XP is the notebook would load and get to the Windows XP loading screen and then freeze.It wouldn't boot in safe mode either.
View 6 Replies
View Related
Mar 28, 2007
I have an Intel 945GTP motherboard running XP Pro on a SATA HDD that, until last week, worked just fine. Then, it decided not to boot up one morning, in either regular or safe mode.It won't boot from the CDROM drive either. It does boot from floppy.I've replaced RAM, taken out all non-essential hardware, replaced HDD cables.HDD can be recognised in another system.Mouse and KB are not usb.I removed the HDD partition, intending to reload XP, but the load hangs on "setup is starting windows" and never goes anywhere - i left it overnight, just to be sure.I repartitioned and reformatted using a 98 disk, just for kicks, to see if it'd work. Yep, boots to c:> HDD manufacturer's diagnostic reports no errors.I have put in another, new SATA HDD, as well as a new ide hdd.
View 1 Replies
View Related
Jul 10, 2005
I have Windows XP and MS Office XP (2003) loaded on my PC. Whenever I boot up the PC, 3 sessions of MS Word open - 2 sessions have a new (blank) document open, and the 3rd session just shows Word as being open (no new document).I went to Documents and Settings | Application Data | Microsoft | Word | Startup to see if there was anything in the folder prompting Word to open the 3 sessions. The folder was empty. I then clicked Start | Run | msconfig | Enter to see if Winword.exe is in the Startup folder. I thought I might see it in there 3 times – one for each of the Word sessions that are opening whenever I boot up the PC. Strangely enough, Winword.exe wasn’t in the Startup folder at all – not even once.
View 5 Replies
View Related
Feb 4, 2005
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
View 6 Replies
View Related
Apr 16, 2007
I cannot find my windows folder on my c drive. In the files and folders "show hidden files and folderS" is checked.No where on the c drive can I see my windows folder.
View 13 Replies
View Related
Aug 29, 2005
my friend gave me this what i thought was a little virus through msn messanger. I thought i got rid of it but now my computer is telling me that i am missing a "windows file 32" is there anyway of getting it back or do i have to re-due my computer?
View 6 Replies
View Related
Apr 12, 2007
Turned on the main computer today and its gone to a black screen with this message at the top:
multi[0]disk[0]rdisk[0]partition[1]WINDOWSsystem32
tkrnlpa.exe
then further done the screen:
Windows could not start because the following file is missing or corrupt:
[windows root]system32
toskrnl.exe
View 14 Replies
View Related
