No Jit Debugger - Unhandled Win32 Exception Has Occurred In Programname.exe
Feb 28, 2007
I'm getting an error message at startup and when I run a couple of programs, An exception "unhandled win32 exception has occurred in programname.exe" However no debuggers are registered that can debug this exception. Unable to jet debug. I contacted Microsoft support who advise to do a repair install of xp, but I did this once before, on a different pc, and lost all the startmenu shortcuts to my installed programs, so am a bit loathe to do this, also as a test I created another administrative account and I don't get this issue. The simple solution (but not the most convenient) would be to use this other account, but is there another way around this?
View 7 Replies
ADVERTISEMENT
May 23, 2009
I recently installed Visual Studio 2008, and then removed it a few days later because I did not use it alot, and now loads of programs crash on load saying they have the error "an unhandled win32 exception occurred in" Can anyone help me fix this?
View 1 Replies
View Related
Feb 7, 2006
i just downloaded empire earth 2 an im trying to play it i did it before but now it isnt working.when i press play campaign then start new game a window comes upsaying: unhandled exception EXCEPTION:ACCESS VIOLATION 0x008ba401: offset 8ba401 from [(unknown)]
View 4 Replies
View Related
Aug 9, 2004
I got a new system Pentium 4 3GHz CPU, 1GB RAM, 800MHz FSB with windows XP Professional, Office 2003 that replaces Pentium 3 300MHz 128MB RAM. I was sohappy because I do not need to use Virtual memory any more and windows xpboots up in a minute. I started installing all the development applicationsin the news system
I ran setup.exe to install Visual Studio 6.0 using DVD. It crashed. I thought DVD is bad or corrupted and used some other CD. Still Visual Studio6.0 installation wizard is crashing. When it crashed, a dialog box comes upand asks whether I can send report to Microsoft or debug. I sent report to Microsoft. Nothing happend more than that. I tried to debug using visualstudio .net. It gives the following error message.
View 5 Replies
View Related
Apr 2, 2010
Every time i switch my system i get the following error "The exception unknown software exception (0xc0000024) occurred in the application at location 0x7c964ed1.Click on OK to terminate the program" and the title bar shows "setup.exe -Application Error"
View 2 Replies
View Related
Apr 14, 2007
I have a Windows XP Media Center 2005. I have been getting the dialogue box listed below when I try to record a program from MY TV on Media Center:Windows - No Disk
Exception Processing Message c0000013 Parameters 75b6bf9c 75b6bf9c.Below the message, there are 3 buttons to choose from -> Cancel, Try Again and continue. When I click on any of these buttons another one pops-up with the same message. The only way to get rid of these is by exiting Media Center.
View 57 Replies
View Related
Jul 6, 2010
I am execute a program but it has pop up an Microsoft .Net Framework error. Is there any method I can use to solve it?
View 1 Replies
View Related
Jul 29, 2007
i am getting this error message. Windows - no Disc Exception processing message c0000013 parameters 75b4bf9c 4 75b4bf9c 75b4bf9c
i have taken a system scan with hijack this and here its, hope you can help me
Logfile of HijackThis v1.99.1
Scan saved at 17:18:40, on 29.07.2007
Platform: Windows XP SP2 (WinNT 5.01.2600)
MSIE: Internet Explorer v7.00 (7.00.6000.16473) ...
View 5 Replies
View Related
Jun 3, 2010
When I boot - I end up with this notice in a box:the exception unknown software exception 0xc000000008) occurred in the application at location 0x7c9666c6.
Clicking OK or CANCEL allows me to go on - but something is wrong.Sometimes I just get a WINDOWS SCREEN but the items in the TASK BAR are blue boxes rather than Start, etc. and at other times the "Blue Screen" shows up.
View 1 Replies
View Related
May 12, 2010
I am getting extremely annoyed with the message that keeps popping up every thirty seconds (see attachment). I don't know why it's searching for some removable media (I think) when my thumb drive is still inserted. I have been having similar problems since the stupid Geek Squad told me I needed a new hard drive and then named it the "H" drive for some reason; now from time-to-time when I try to run programs which (I think) used to be based off my C drive I'll get one of these or a C+++ runtime error window.How can I make this stop? I'm running Windows XP SP3. on an HP desktop. All help is appreciated, as this is a highly annoying problem right now.
View 3 Replies
View Related
Oct 26, 2007
When I access MSN MONEY I receive error message WINDOWS - NO DISK exception processing message c0000013 Parameters 75b6bf9c4 75b6bf9c 75b6bf9c I can cancel the error but it continually reappears as I search other pages. If I exit Internet Explorer and open it again and avoid MSN MONEY the error message does not appear.
View 5 Replies
View Related
Aug 2, 2009
In the past few months I've added a 512 stick of RAM and replaced the hard drive in my five year old laptop with a brand new Seagate Momentus. The laptop itself is a Pentium M 1.8 running Windows XP Home (Service Pack 3). Also in the past few months I've started receiving BSOD's for Machine Check Exception errors. The numbers tend to vary, though I can never catch one long enough to write them down, as the system flashes the error screen and then shuts off or reboots.
I've run MemTest as recently as this afternoon and the results came back with no errors found in the memory. I ran a SMART test from SpeedFan on the new HD and it was deemed perfectly fit. Still, I can't shake the feeling there's something going on with the new hardware in this laptop, as I had never even heard of a Machine Check Exception since I never got one until some time after installing the parts.
I notice I get this specific error when playing a computer game (Diablo 2, for Christ's sake, so the game isn't particularly taxing!) or watching video, ie intensive activities. It never happens while just browsing the net. I am not overclocking the processor. In fact, I'm undervolting it to keep heat down, though I've turned off Notebook Hardware Control to go back to normal voltage setting and I still get the Machine Check Exception errors with the same frequency.
View 6 Replies
View Related
Sep 30, 2009
I've recently put together an old computer using parts from 2 similar machines. The specs are..
Mobo: GA-K8VM800M
CPU: AMD Sempron 2800+ - o/ced to 2ghz tonight.
HDD: Master - Seagate, Slave - Maxtor both 70gb
Ram: 256 + 512 @ 400
Onboard VGA..
Standard 250V PSU
Okay so, i've been trying all night to install SP3 on this thing but every time I get this error "An Internal Error Occurred" and it's driving me crazy. I installed a fresh Windows XP SP2 on it and uninstalled the few updates I did through windows updates. I've cleaned the registry. I've done everything it says to do here: http://support.microsoft.com/kb/949384. I've tried installing it from the Windows updates page, i've tried installing it through Automatic updates and i've even downloaded the full SP3 Package (also tried this in safe-mode). I've read every freaking forum about this error and took their advice. Nothing works........
View 4 Replies
View Related
May 18, 2008
I recently did a system repair after having problems with Windows starting up, and I need to re-install sp2 for programs such as iTunes to work. When I try running the update wizard, it gets to the 'collecting inventory' (I think that's what it's called) stage, and then stops with an "An Internal Error Occured" message. Below I posted the data from svcpack.log.
[QUOTE]
================================================================================
3.937: 2008/05/18 22:35:36.268 (local)
3.937: f:a20f92d53e2234d8e995e0i386updateupdate.exe (version 5.5.1005.0)
3.937: Service Pack started with following command line:
4.093: Return Value From OnACPower = 1
4.093: OnACPower returned value( 0x1 ) which is Equal To 0x1
4.093: Condition succeeded for section OnACPower.Section in Line 1 of PreRequisite
4.093: SOFTWAREMicrosoftWindowsCurrentVersionSetupWindowsFeatures is not Present
4.093: First Condition in A6Block.Section Succeeded..................
View 4 Replies
View Related
May 30, 2004
I am trying to uninstall Webshots but in Programs there is no uninstall option,if I go to add/remove and click remove it says an error occured while trying to remove Webshots perhaps it has been uninstalled well it hasnt its like it doesnt want to go.
View 4 Replies
View Related
Feb 22, 2007
I've been trying to rebuild my friend's PC for ages now and every time I get past the initial part of setup (boot from CD, create partition, copy files, reboot) I get this error message.I've done everything I can think off:I still get the same error message when I replace the hard drive with a new one.And I've read about a billion articles about this but none of them have the same solution.
View 5 Replies
View Related
Sep 19, 2007
Before I reinstall the OS,,, does anyone have the fix for DHCP issues. When I run ipconfig I get the internal error occured error. I have tried to retstart TCP/IP, I changed the name of the PC and ther group name then rebooted but notta.
View 3 Replies
View Related
Oct 25, 2006
For some reason when I go to Control Panel before it opens I get the message :An ERROR Occurred While Windows was working with the Control Panel File. C:WINDOWSSystem32Netsetup.cpl. I Googled it an found I could resolve it by RUN>MsConfig>Start Up and Unchecking IPMon32.So I just like to know exactly what this is and if it can cause any probs.by disabling it.
View 4 Replies
View Related
Jul 5, 2005
Because item removed by owner. Each time I try to put a new display background - It deletes it and does the same message as a background. Is this a virus?
View 2 Replies
View Related
Oct 26, 2007
In XP, as far as I know, the system has to restart in order to allow chkdsk to work on the drive. Well, it takes a while and I miss the messages at the end of the test. I have no idea whether it corrected anything or whether everything turned up fine.How can I have it wait for me to view the results? Or where can I find the results at?Is there a way to run chkdsk in XP without rebooting? What happens if I attempt this in safe mode?
View 6 Replies
View Related
Aug 7, 2007
A fatal exception 00 hass occurred at 0028:c023DB7F in VXD VDD (09) + 0001803 Unable to find this listed anywere.
View 6 Replies
View Related
Dec 25, 2007
Custom built system, Primary IDE connects to HDD Hitachi, Seconday IDE connects to Master DVD Burner 1.I opened my case, put in a 2nd DVD Burner in on Secondary IDE Slave. Fired the machine up, and the entire Secondary IDE fails to pick up both DVD's.I put it back the way it was, I swapped cables, ran the HDD from secondary IDE, tested the DVD's on the Primary IDE, and my conclusion is that I've somehow damaged the Secondary IDE from picking up any device.Now I am running the new DVD burner as Primary Slave and the HDD as Primary Master, I boot up and get
View 14 Replies
View Related
Mar 26, 2010
Im having a challenge when Im trying to maaped a workstation to a server on active directory server 2008. THE NETWORK MAPPED COULD NOT BE CREATED BECAUSE THE FOLLOWING ERROR HAD OCCURED. AN EXTENDED ERROR HAS OCCURED.
View 2 Replies
View Related
Sep 8, 2005
When i boot windows XP i very often get a A disk read error occured. Press Ctrl+Alt+Del to restart. Does anyone know what is the reason for this? It boots successfully around
30% of the times i try.
View 1 Replies
View Related
Sep 10, 2007
I've got Windows XP and when I try and remove McAfee using the 'add/remove programs' Uninstaller, it comes up with an error message (no number - just 'an error has occured while trying to uninstall McAfee Security System'). I have succesfully uninstalled other components of McAfee, like the spamkiller and firewall, but can't get rid of this last bit, which I need to do to install my new software. I've also tried uninstalling from the start menu but no option comes up under the programme list.
View 6 Replies
View Related
Jul 30, 2009
I've spent about half the day building my new PC - a Windows XP Pro 64-bit box. I've installed the hardware and it is recognized by the BIOS on my Gigabyte PE45 UD3L motherboard.. The next step was to install the OS, a 64-bit version of Windows XP Pro. All went well until the installation program prompted me to reboot. I received the message: "A disk read error occurred. Press Ctrl+Alt+Del to restart." I've done this four or five times now, with and without the installation CD loaded. If the CD is loaded, the installation program tries to copy the files to the hard drive all over again. I went along with this once, thinking maybe the first time some driver had been corrupted. I have also changed the boot order in the BIOS, with first boot to the HD. I have reset the Fail-Safe Defaults in the BIOS. There are two hard drives in the PC, 320GB SATA Western Digitals. One of them has not been partitioned; the other was partitioned by the Win XP installation program.
View 9 Replies
View Related
Nov 4, 2007
Playing on pogo and I keep getting a message saying CTF Loader error occured. It also pops up when I open a new page.
View 7 Replies
View Related
Aug 12, 2008
I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
View 2 Replies
View Related
Jul 24, 2008
I keep trying to install .net Framework in order to be able to instal a number of other programs. However, when I try to install Framework, I always get a message saying that an error has occured when trying to create a directory in such and such file an the setup shuts down. i know for sure my account has full admin. rights so I know that can't be the problem. Any idea what I can do? As I said, there are other programs I want to install however they say I require .net Framework to install it.
View 4 Replies
View Related
Aug 17, 2009
My computer has recently started giving me an error message that says "A disk read error occurred. Press CTRL-ALT-DEL to restart." during startup. The first time this came up I took it into the repair shop the morning after. They turned the computer on, it started normally, and after keeping it overnight they returned it to me saying that they could find nothing wrong with it.It worked normally for about 2 days after that and then when I was using it the system suddenly became unresponsive. I was forced to turn it off via the button on the front of my tower, and when I turned it back on the disk read error message came back up.
The next morning when I turned it on it was fine.
View 3 Replies
View Related
Oct 12, 2010
So I'm trying to run doom on my laptop with win xp through dosbox, and when i command dosbox to run my launcher for it, it says "this program must be run under Win32". what does this mean, and how do I fix it so I can run my game?
View 4 Replies
View Related
