Occurred Error 0028 - C023DB7F In VXD VDD
Aug 7, 2007A fatal exception 00 hass occurred at 0028:c023DB7F in VXD VDD (09) + 0001803 Unable to find this listed anywere.
View 6 RepliesA fatal exception 00 hass occurred at 0028:c023DB7F in VXD VDD (09) + 0001803 Unable to find this listed anywere.
View 6 RepliesI've recently put together an old computer using parts from 2 similar machines. The specs are..
Mobo: GA-K8VM800M
CPU: AMD Sempron 2800+ - o/ced to 2ghz tonight.
HDD: Master - Seagate, Slave - Maxtor both 70gb
Ram: 256 + 512 @ 400
Onboard VGA..
Standard 250V PSU
Okay so, i've been trying all night to install SP3 on this thing but every time I get this error "An Internal Error Occurred" and it's driving me crazy. I installed a fresh Windows XP SP2 on it and uninstalled the few updates I did through windows updates. I've cleaned the registry. I've done everything it says to do here: http://support.microsoft.com/kb/949384. I've tried installing it from the Windows updates page, i've tried installing it through Automatic updates and i've even downloaded the full SP3 Package (also tried this in safe-mode). I've read every freaking forum about this error and took their advice. Nothing works........
I recently did a system repair after having problems with Windows starting up, and I need to re-install sp2 for programs such as iTunes to work. When I try running the update wizard, it gets to the 'collecting inventory' (I think that's what it's called) stage, and then stops with an "An Internal Error Occured" message. Below I posted the data from svcpack.log.
[QUOTE]
================================================================================
3.937: 2008/05/18 22:35:36.268 (local)
3.937: f:a20f92d53e2234d8e995e0i386updateupdate.exe (version 5.5.1005.0)
3.937: Service Pack started with following command line:
4.093: Return Value From OnACPower = 1
4.093: OnACPower returned value( 0x1 ) which is Equal To 0x1
4.093: Condition succeeded for section OnACPower.Section in Line 1 of PreRequisite
4.093: SOFTWAREMicrosoftWindowsCurrentVersionSetupWindowsFeatures is not Present
4.093: First Condition in A6Block.Section Succeeded..................
I am trying to uninstall Webshots but in Programs there is no uninstall option,if I go to add/remove and click remove it says an error occured while trying to remove Webshots perhaps it has been uninstalled well it hasnt its like it doesnt want to go.
View 4 Replies View RelatedI've been trying to rebuild my friend's PC for ages now and every time I get past the initial part of setup (boot from CD, create partition, copy files, reboot) I get this error message.I've done everything I can think off:I still get the same error message when I replace the hard drive with a new one.And I've read about a billion articles about this but none of them have the same solution.
View 5 Replies View RelatedBefore I reinstall the OS,,, does anyone have the fix for DHCP issues. When I run ipconfig I get the internal error occured error. I have tried to retstart TCP/IP, I changed the name of the PC and ther group name then rebooted but notta.
View 3 Replies View RelatedFor some reason when I go to Control Panel before it opens I get the message :An ERROR Occurred While Windows was working with the Control Panel File. C:WINDOWSSystem32Netsetup.cpl. I Googled it an found I could resolve it by RUN>MsConfig>Start Up and Unchecking IPMon32.So I just like to know exactly what this is and if it can cause any probs.by disabling it.
View 4 Replies View RelatedBecause item removed by owner. Each time I try to put a new display background - It deletes it and does the same message as a background. Is this a virus?
View 2 Replies View RelatedCustom built system, Primary IDE connects to HDD Hitachi, Seconday IDE connects to Master DVD Burner 1.I opened my case, put in a 2nd DVD Burner in on Secondary IDE Slave. Fired the machine up, and the entire Secondary IDE fails to pick up both DVD's.I put it back the way it was, I swapped cables, ran the HDD from secondary IDE, tested the DVD's on the Primary IDE, and my conclusion is that I've somehow damaged the Secondary IDE from picking up any device.Now I am running the new DVD burner as Primary Slave and the HDD as Primary Master, I boot up and get
View 14 Replies View RelatedIm having a challenge when Im trying to maaped a workstation to a server on active directory server 2008. THE NETWORK MAPPED COULD NOT BE CREATED BECAUSE THE FOLLOWING ERROR HAD OCCURED. AN EXTENDED ERROR HAS OCCURED.
View 2 Replies View RelatedWhen i boot windows XP i very often get a A disk read error occured. Press Ctrl+Alt+Del to restart. Does anyone know what is the reason for this? It boots successfully around
30% of the times i try.
I've got Windows XP and when I try and remove McAfee using the 'add/remove programs' Uninstaller, it comes up with an error message (no number - just 'an error has occured while trying to uninstall McAfee Security System'). I have succesfully uninstalled other components of McAfee, like the spamkiller and firewall, but can't get rid of this last bit, which I need to do to install my new software. I've also tried uninstalling from the start menu but no option comes up under the programme list.
View 6 Replies View RelatedI've spent about half the day building my new PC - a Windows XP Pro 64-bit box. I've installed the hardware and it is recognized by the BIOS on my Gigabyte PE45 UD3L motherboard.. The next step was to install the OS, a 64-bit version of Windows XP Pro. All went well until the installation program prompted me to reboot. I received the message: "A disk read error occurred. Press Ctrl+Alt+Del to restart." I've done this four or five times now, with and without the installation CD loaded. If the CD is loaded, the installation program tries to copy the files to the hard drive all over again. I went along with this once, thinking maybe the first time some driver had been corrupted. I have also changed the boot order in the BIOS, with first boot to the HD. I have reset the Fail-Safe Defaults in the BIOS. There are two hard drives in the PC, 320GB SATA Western Digitals. One of them has not been partitioned; the other was partitioned by the Win XP installation program.
View 9 Replies View RelatedPlaying on pogo and I keep getting a message saying CTF Loader error occured. It also pops up when I open a new page.
View 7 Replies View RelatedI keep trying to install .net Framework in order to be able to instal a number of other programs. However, when I try to install Framework, I always get a message saying that an error has occured when trying to create a directory in such and such file an the setup shuts down. i know for sure my account has full admin. rights so I know that can't be the problem. Any idea what I can do? As I said, there are other programs I want to install however they say I require .net Framework to install it.
View 4 Replies View RelatedMy computer has recently started giving me an error message that says "A disk read error occurred. Press CTRL-ALT-DEL to restart." during startup. The first time this came up I took it into the repair shop the morning after. They turned the computer on, it started normally, and after keeping it overnight they returned it to me saying that they could find nothing wrong with it.It worked normally for about 2 days after that and then when I was using it the system suddenly became unresponsive. I was forced to turn it off via the button on the front of my tower, and when I turned it back on the disk read error message came back up.
The next morning when I turned it on it was fine.
I am having an issue with a Maxtor Model Number 92739U6 hard drive. I have just finished formatting and installing windows xp home edition. Everything was going ok until I restarted the computer. First right after I restarted the computer I got an error message A Disk Read Error Occurred. Press CTRL+ALT+Del. I was unsure what caused this error message so I started to research this issue on Maxtor?s website and they advised me to use fdisk /mbr to repair the error. I did that and restarted the computer. Same Error?. The thing I can?t figure out is why I am able to boot right to windows using a boot disk.
View 8 Replies View RelatedEverything has been fine with my 3 and a half year old ADVENT PC, and I've been successful in upgrading parts such as DVD Drives, adding extra RAM and installing my new graphics card.However, in the past few days, when I boot up my PC, it stops at what I believe the DOS screen (part with BOOT FROM CD etc.) and will say A Disk Read Error Occurred. Press Ctrl+Alt+Delete to restart. This happens 2/3 of the times I turn on the PC.Also, if I do press Ctrl+Alt+Delete and the PC restart, it is normally successful, and will boot up Windows perfectly. Just this morning, it gave me the error, and with 2 Ctrl+Alt+Delete restarts, it's working perfectly, hence I can type this.
View 5 Replies View RelatedA Disk Read Error Has Occurred Press ctrl alt del to restart I keep getting that message when i turn on my computer its been like that for the past few days. Im Using windows XP Bell system optiplex 170L series Bios version A07 I can access the setup menu and the boot menu but idk what to do. im a computer noob.
View 4 Replies View RelatedI have had XP Home installed on a new Seagate hard drive for about 2 months. Suddenly, the computer did a restart and now it will not open Windows. It finds all my drives and then goes to a screen displaying "a disc read error has occured. Press control, alt, delete to restart." On restart, I receive the same message. I have tried checkdisc, fix boot and fix master boot record in the recovery console on my cd but nothing works. Is this a problem with the hard drive or Windows? Any suggestions would be helpful. I would hate to have to reinstall Windows.
View 2 Replies View RelatedI have had few troubles with my laptop + 2PCs in belkin network. The last problem to resolve on my PC: Window has recovered from a serious error, send message etc.Problem caused by Device Driver Active desctop Recovery Click :Restor My Desktop Click An error has occured in the script page
View 11 Replies View RelatedI'm running Windows XP on a EMachines PC. The PC is only a little over a year old. Suddenly tonight I have what appears to be a DOS screen that says "A Disk Read Error Occurred. Press CTRL+ALT+DEL to restart". After doing a ctrl alt delete, I keep getting the same screen again. Can anyone shed some light on how to restart my PC? Is the hard drive shot?
View 14 Replies View RelatedWhen I start up, I get a black screen with this: Disk read error occurred Press Ctrl+Alt+Delete to restart So I do. Same thing happens. I don't have any CDs or anything in the drive. The computer had also been shutting down randomly on me prior to this.
View 2 Replies View RelatedComputers a few years old its a Dell gx110 and it wont start , it will get past the initial loading screen but instead of going to my accounts page a message says that "a disk reading error has occurred" or "cannot find disk drive one" ive tried a few things but nothings worked
View 1 Replies View RelatedWhen I open up the Wizard and click "next", it goes to the "options" screen, but when I click on "custom setup" or "next" (again) I get an error message that says "Error: An error occurred while setting scanner preferences. If the scanner is being used [which it isn't], wait for it to complete the task, and then try again."I'm using a Dell Dimension E510 with a Dell AIO 942.Please help, if at all possible. I've downloaded some file recovery programs, but have since removed them. I don't know what else could be interfering here.
View 14 Replies View RelatedI"m running WinXP SP2 Home. Hardware is 2.0 Celeron, 1 gig Ram, 64MB Nvidia Video Card, PS/2 keyboard and mouse, HD's are 250GIG Western Digital with 4 partitions and 27% free on the XP Boot and 200GIG Western Digital with 2 Partitions. I have a Lite-On DVD +-R/RW drive and a 3.5 floppy. I am setup with a Duel-Boot configuration Win 98/XP. I do not have a paging file.
My problem occures after I hit enter for the Select Operating System page. I Hit enter, Win XP proceeds to load. After I hit enter and Windows loads the blue welcome screen 1 minute has passed. I hear the Welcome Audio music, however blue welcome screen is still there for 30 more seconds. Next is my picture that I have as my background that is shown without icons for 1minute 21seconds. Windows now displays my icons on my desktop. the icons blink at minute 4. after 4 minutes and 51 seconds I am able to use my computer. At bootup I only have 43 programs running and 357MB of the 1 gig ram taken.
What I have done:
1) I have started in safe mode and defraged my PC, 0% frag on all partitions except a drive that isn't currently plugged in and it was 1% because it's my backup drive (not worried about that 1%)
2)Removing all connected Componets and rebooted, same problem.
3) I have tried using msconfig.exe and setting the startup selection as Normal- it's defaulted to Selective. Tried reducing my startup programs. ....
In XP, as far as I know, the system has to restart in order to allow chkdsk to work on the drive. Well, it takes a while and I miss the messages at the end of the test. I have no idea whether it corrected anything or whether everything turned up fine.How can I have it wait for me to view the results? Or where can I find the results at?Is there a way to run chkdsk in XP without rebooting? What happens if I attempt this in safe mode?
View 6 Replies View RelatedI'm getting an error message at startup and when I run a couple of programs, An exception "unhandled win32 exception has occurred in programname.exe" However no debuggers are registered that can debug this exception. Unable to jet debug. I contacted Microsoft support who advise to do a repair install of xp, but I did this once before, on a different pc, and lost all the startmenu shortcuts to my installed programs, so am a bit loathe to do this, also as a test I created another administrative account and I don't get this issue. The simple solution (but not the most convenient) would be to use this other account, but is there another way around this?
View 7 Replies View RelatedI recently installed Visual Studio 2008, and then removed it a few days later because I did not use it alot, and now loads of programs crash on load saying they have the error "an unhandled win32 exception occurred in" Can anyone help me fix this?
View 1 Replies View RelatedI just bought a new motherboard which is Asus P5GD2-X. The problem occured when I tried to install it with Windows XP Professional CD. It seemed that my SATA Hdd could not be found... I cannot find any SATA driver for it in the CD or in ASUS website..
View 8 Replies View RelatedI am running Win XP-SP2. I wiped my hard drive due to irresolvable software conflicts. I reinstalled XP-SP2, Office, Norton, the printer and scanner and my digital camera software package. All were updated and working perfectly until Sunday. I booted up the machine only to get a warning that says One of your disks may have errors let the computer reboot itself (which it will do repeatedly, stuck in a reboot loop) or you can hit any key to ignore this warning. You have only ten seconds to read all this and make a decision.
Once the computer boots up, everything seems to work as normal except for system restore. I tried to restore to the day after I reformatted and installed everything and all I get is an error saying Cannot restore to that point, please choose another point to restore tooor something to that effect.