New Build, Installation / Goes Right Back To The Original Setup Screen
Jun 1, 2008
I'm building my first system from scratch, and have done fine up until the XP installation. This is by far the first XP installation I've done, so thought it would be a breeze. Not turning out that way.
It runs like normal until it gets to the part where it restarts and is supposed to resume/complete the installation. When it boots back up, it goes right back to the original Setup screen (Enter for setup, R for repair, etc). I've tried re-installing numerous times
View 3 Replies
ADVERTISEMENT
Jul 5, 2010
My computer screen is upside down, how can i turn it back ito original position?
View 1 Replies
View Related
Dec 4, 2006
I started an upgrade for xp pro part way through the install I got a message "WatchDriverSigningPolicy.exe" no found I pressed enter then got another message "fake setup call himself instead original "setup.exe" ; setup abort!" now each time I reboot it starts to load xp then gives me the same message then press enter it then reboots.
View 3 Replies
View Related
May 14, 2008
I reformat the drives and during the XP Home Discs process of copying files for the installation, the process freezes the system anywhere from 11% at driver.cab to 54% at some random file (i didnt take note). I have tried 2 different XP home Discs (both legal etc.) and two different disk drives, though both are new. and still it is yielding the same result. I have also tried loosening the ram timings to 5-5-5-15 (they are rated at 4-4-4-12). No luck and this is beggining to wear me down.
View 2 Replies
View Related
Jul 22, 2009
1) While I originally started with XP SP2, now I have a XP SP3 CD, with the SATA drivers successfully incorporated via nLite. SAME PROBLEM, even with the BIOS and XP Setup recognizing the HDDs on SATA ports instead of IDE channels.
2) I downloaded the Windows 7 Beta 64 bit, got thru the install to the point of "Updating Registry" and then the system lost power as with XP and did a soft restart.I am currently downloading to Ubuntu Linux to see if that also fails, at which point I definitely know I have a hardware issue. The question is: Which component? I am leaning towards PSU, with mobo in second. Please any insight from the pros would help.
View 13 Replies
View Related
Oct 25, 2007
I turned on my laptop and got the following message: "Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair." My problem is that I'm unable to location the original Setup CD-ROM. Can this CD be ordered from the manufacturer? Also, whenever this Setup CD is required to repair, will My Documents be effected?
View 14 Replies
View Related
Feb 4, 2009
I have recently built a gigabyte 770 modo with SATA harddrive. When I try to reboot with the XP cd to intall, everything went fine but when the system restart in harddrive, it is giving me disc error.
View 2 Replies
View Related
Nov 22, 2008
Recently my computer was running really slow so i took it to the shop they uninstalled windows vista and added windows xp now it doesn't work properly how can i put vista back on without the original disc.
View 11 Replies
View Related
Jan 16, 2006
i need help putting my system back to it's original configurations. I have this crazy payment demander coming up from movieland.com on something I never ordered and isn't on my computer.
View 14 Replies
View Related
Jul 26, 2005
I have Windows XP Home SP2 and yesterday when I started up the computer the task bar and the top of a window is displayed like a windows me theme and not XPs clean design. The only thing that might have changed it is adobe reader 7 which I installed the day before the display changed. Is there any way to change it back to the origional display?
View 14 Replies
View Related
Dec 5, 2007
Can you tell me if it's possible to change the icons back to the original ones from websites? All my Favorite icons are the same (the default IE icon). Is it possible to change them all together or they have to be done one by one?
View 8 Replies
View Related
Apr 8, 2008
I have just cloned my C: drive which is only 2.93 GB big, to install my Windows OS on my D: drive which is a lot bigger.Is there anyway I can now remove the OS or the files from the C: drive, and if so, if not, how do i now make my computer boot up from copy of OS now installed on D:
View 9 Replies
View Related
Aug 7, 2007
I installed wubi to try out ubuntu, it worked great but i have now uninstalled ubuntu as i couldnt get internet on my dell Insipron 1501. I have now gone back to windows xp and my computer is so slow !! I have 1512mb ram and it feels like i have 512mb.
View 5 Replies
View Related
Dec 15, 2006
My computer didn't come with an XP CD, just the manufacturer's restore CD which will wipe out all I've done in the last four years. So, if I backup (copy) all the files on my C drive, except the Windows folder (assuming that's where all the OS files are), to an external drive, then run the restore CD which will revert the computer back to the way it was when I bought it. Then download and install SP2 and copy the original files back to C.
View 3 Replies
View Related
May 1, 2006
I have about an 2" black space around an open page on my screen......how do I get it to return to original full screen size?
View 8 Replies
View Related
Mar 16, 2008
My system was working fine until I installed XP SP2. I am having trouble with a Blue Screen Error "DRIVER_IRQL_NOT_LESS_OR_EQUAL" I believe NVGTS.SYS is the culprit ? I have had to boot in safe made with network to come here to try and get help. Can someone please give me a suggestion as to what might be the issue? I am trying to install this on a new system build, Intel Core 2 Quad Q6600 2.4 GHz, EVGA NForce 780i SLI, 2 gigs of OCz DDR 2 800, Nvidia 8800GTS (G92) 512mb 256-bit GDDR3 PCI-E 2.0 x-16, WD 74 gig Raptor, Liteon 20X DVDR. Thank you~David
View 4 Replies
View Related
Jun 28, 2007
so, a few years back i read a magazine that said to change the type of computer in device manager to standard pc because it made the computer run a little better or faster.so now i've got my laptop and i've noticed it getting slower and thought that i would do this... VERY BAD MOVE! i can still boot windows and everything - it meant that i had to let the computer reinstall all of the drivers for my hardware - but i have noticed in the device manager now that there are two instances of 'standard pc', there is also a new section titled 'other devices' with about 15 devices that seem to have no driver for them - some mention 'ISA' so i am guessing that changing to standard pc means that windows thinks my laptop is now a desktop pc with ISA slots? i find that when i put my laptop lid down the thing shuts down, when i press the power button it turns off straight away (doesn't even shut down!). i had had the laptop configured for ages to do nothing when i closed the lid and give me shut down options when i pressed the power button. i look in power options and i can only cinfigure the monitor screen and hard disk power off options - every other option is not available. when i do bring up the shut down options i can no longer choose standby.
i have also realised that i can not turn on my wireless connection - i've tried all sorts to get it to work with no avail! the laptop is an acer ferrari and when i call up the manager app it says that bluetooth and wireless are not present (by the way i can still get the bluetooth button to work - correction - it starts up with the button on but if i turn it off it won't let me turn it on again). the emanager and presentation manager buttons on the laptops casing don't work either (i have to access them via software route).
View 7 Replies
View Related
May 15, 2007
I've got a computer which keeps restarting. It's rather annoying.I switch it on, and it starts normally. It then restarts after about 1 minute.When I open in it up in safe mode, however, nothing is wrong with it! So I decided to reinstall windows, and i formatted c:; installing windows and it restarts during the installation...Windows then says "restarting reinstallation, and starts the installation from the beginning. Then it restarts again.
View 13 Replies
View Related
May 2, 2007
I am trying to reinstal my WIN XP but when I reach the near end of "Installing Windows" at 9 minutes the setup won't go any further it looks like it is stuck on Registering Components. I don't get in errors or anything like in some other cases that i read. Here is a picture that might help resolving the matter.
View 7 Replies
View Related
Apr 30, 2006
A new 250 gig seagate SATA 7200.8 hard drive and a win xp home upgrade edition. enabled SATA in BIOS, connected SATA cable to SATA1 on mobo, BIOS didn't recognize the drive, connected to SATA2 and BIOS did recognize drive so I tried to partition and format using Seagate's DiscWizard from floppy. Things seemed to go fine until I got a message that format wasn't completed because of some error.I went ahead and tried to install from xp cd, loaded SATA drivers from floppy, cd started loading but then hangs up at "setup is starting windows"I've never used SATA before.
View 7 Replies
View Related
May 21, 2005
I read somewhere that I could do a repair installation to see if I could fix it. Well I go through the usual steps until I get to registering components where it goes for about a minute and then restarts. I thought thats what its suppose to do so I wait and wait and it goes through the whole process over so I go through it about 10 times before I realize something is wrong. So I go on my brother's laptop and look up whats wrong and I try opening the comand prompt by pressing shift+F10 and then typing "control sysdm.cpl" to get to the system in the control panel
View 14 Replies
View Related
Oct 5, 2010
Trying to remove my raid0 install and restore windows to a regular installation.
I deleted my array but my boot menu is not picking up either of my hard drives, however they are still showing up in my raid config window.Its been a while since I've done this but I don't recall any hardware alterations being necessary to switch back.Im obviously missing something, can anyone point me in the right direction? as it stands when I try to install xp now it is giving me a blue screen with 7b error
View 2 Replies
View Related
Jul 4, 2010
I recently re-installed Windows XP on my Acer Aspire 5920 laptop. My only problem with it is that I can't set my screen resolution to the actual resolution of my screen (1280x800) since the only two options are 800x600 or 1024x768.The nVidia driver I got on the acer website wont install, saying:The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit.
View 5 Replies
View Related
Jun 19, 2008
I have sony vaio laptop and it has windows vista and I am going to try to roll back to windows xp pro edition I have talk with sony they tell me that my laptop is compatible with xp and my question is do I just put it cd in and enter product key and select replace partion
View 2 Replies
View Related
Mar 11, 2005
I'm running Win XP and I have a question about setting up a modem connection while already having a DSL internet connection.I would like to set up a modem connection so I could get on the internet whenever my DSL connection goes down. Here's the problem. When I open Network Connections icon in the Control Panel and click the New Connection Wizard, the "Connect using a dial-up modem" option is grayed out and can't be clicked. Does anyone know what I could do to get that option back?
View 7 Replies
View Related
Sep 14, 2008
I got this dell inspiron 1721 from a friend, and it had Vista Home Premium. I wanted to get XP back, so I installed it and then the system was dual booting and it took up 85% of my hard drive. SO...I tried to reformat it and just install XP, but the only disk i had was for my (gateway xp media center) desk top so none of my dirvers installed and then the whole thing became a big mess. Now, I have XP installled with most of the drivers installed, but now I miss Vista, and when I try to install with my Vista recovery disk, I get an error: can not install install missing or corrupt file e:sourcesinstall.wim error 0x80070570... or something similar to that. I have been at this for days on end.
View 3 Replies
View Related
Aug 9, 2007
Isn't the problem going from vista back to xp an sata driver problem? If you would disable sata native mode then boot from the xp cd it should show the hard drive and any partitions. The biggest chore may be getting the drivers needed for XP and if is a laptop they rarely come with a floppy drive, so during the xp install I don't know if after you press F6 if you can remove the xp cd and put in a cd that you burned the needed drivers to if a floppy is not available. People should have the freedom to choose whatever operating system they want without all of the headaches
View 1 Replies
View Related
Feb 17, 2007
I am attempting to clean install XP Home to a (semi) new system.New mobo (PCChips P23G v3.0); new Intel Celeron D 3.2MHz processor; one new stick 512mb US Modular DDRII; new Seagate 250GB HD; -these are all upgrades to an existing case with existing 300W p/s; floppy; CD-ROM.Problem: setup loads files as normal, then reboots.When it comes back up and the GUI phase is suppose to start, it goes to a blank screen and nothing else happens.I have tried different memory, different (older) HD;I've tried making changes to the BIOS (new board that is suppose to be XP compatible, but tried it anyway. onboard video, sound, etc. No extra cards installed. Very minimal system); I've tried setup by booting from the CD, booting from floppies, xcopying I386 to the harddrive; I've tried loading an old version of Windows 98! and then doing an "upgrade" (actually a new install is the only option- it is an OEM version of XP Home, not an upgrade).
I've searched MS but nothing comes close to solving this issue.I've built systems before with XP pro (and older) and have never had anything close to the problems with this one.
View 14 Replies
View Related
May 23, 2010
using windows xp how do I get in the BIOS Setup screen
View 1 Replies
View Related
Mar 18, 2007
MAJOR problem trying to install windows XP pro. After rebooting I keep getting to the same screen the "welcome to setup" screen, where I hit ENTER , F8 at the EULA, then I see the partition list.At this point regardless of if I hit ENTER for the selected partition, or delete and recreate the partition (and reformat to NTFS), it loads files from CD, then reboots and takes me back to the same screen.
View 7 Replies
View Related
Aug 8, 2005
Setup a particular photo file as my screensaver.
View 6 Replies
View Related
