I have Windows XP Home SP2 and yesterday when I started up the computer the task bar and the top of a window is displayed like a windows me theme and not XPs clean design. The only thing that might have changed it is adobe reader 7 which I installed the day before the display changed. Is there any way to change it back to the origional display?
View 14 RepliesCan you tell me if it's possible to change the icons back to the original ones from websites? All my Favorite icons are the same (the default IE icon). Is it possible to change them all together or they have to be done one by one?
View 8 Replies View RelatedGames won't launch/patch...When I log on, it will only show the back ground, no icons load...so I have to log off and back on to get icons.Just a lot of issues and I'm not sure why.I have 2 partitions 40 gig's each, one I save everything on and don't format
View 6 Replies View RelatedI have a rig with some form of linux i put on there months ago and now i want to install xp home sp 2 on it. i have done many xp home installs and im using the disk from my good rig the one whos specs i have listed because i just put vista on this one. now whenever i put in the xp home disk it starts like normal by saying press any key to boot from cd.... i hit enter and then the black backround stays but no text ever appears. after about 10 min the drive stops spinning.
View 4 Replies View Relatedso, a few years back i read a magazine that said to change the type of computer in device manager to standard pc because it made the computer run a little better or faster.so now i've got my laptop and i've noticed it getting slower and thought that i would do this... VERY BAD MOVE! i can still boot windows and everything - it meant that i had to let the computer reinstall all of the drivers for my hardware - but i have noticed in the device manager now that there are two instances of 'standard pc', there is also a new section titled 'other devices' with about 15 devices that seem to have no driver for them - some mention 'ISA' so i am guessing that changing to standard pc means that windows thinks my laptop is now a desktop pc with ISA slots? i find that when i put my laptop lid down the thing shuts down, when i press the power button it turns off straight away (doesn't even shut down!). i had had the laptop configured for ages to do nothing when i closed the lid and give me shut down options when i pressed the power button. i look in power options and i can only cinfigure the monitor screen and hard disk power off options - every other option is not available. when i do bring up the shut down options i can no longer choose standby.
i have also realised that i can not turn on my wireless connection - i've tried all sorts to get it to work with no avail! the laptop is an acer ferrari and when i call up the manager app it says that bluetooth and wireless are not present (by the way i can still get the bluetooth button to work - correction - it starts up with the button on but if i turn it off it won't let me turn it on again). the emanager and presentation manager buttons on the laptops casing don't work either (i have to access them via software route).
Recently my computer was running really slow so i took it to the shop they uninstalled windows vista and added windows xp now it doesn't work properly how can i put vista back on without the original disc.
View 11 Replies View Relatedi need help putting my system back to it's original configurations. I have this crazy payment demander coming up from movieland.com on something I never ordered and isn't on my computer.
View 14 Replies View RelatedMy computer screen is upside down, how can i turn it back ito original position?
View 1 Replies View RelatedI'm building my first system from scratch, and have done fine up until the XP installation. This is by far the first XP installation I've done, so thought it would be a breeze. Not turning out that way.
It runs like normal until it gets to the part where it restarts and is supposed to resume/complete the installation. When it boots back up, it goes right back to the original Setup screen (Enter for setup, R for repair, etc). I've tried re-installing numerous times
I installed wubi to try out ubuntu, it worked great but i have now uninstalled ubuntu as i couldnt get internet on my dell Insipron 1501. I have now gone back to windows xp and my computer is so slow !! I have 1512mb ram and it feels like i have 512mb.
View 5 Replies View RelatedMy computer didn't come with an XP CD, just the manufacturer's restore CD which will wipe out all I've done in the last four years. So, if I backup (copy) all the files on my C drive, except the Windows folder (assuming that's where all the OS files are), to an external drive, then run the restore CD which will revert the computer back to the way it was when I bought it. Then download and install SP2 and copy the original files back to C.
View 3 Replies View Relatedmy mom installed a virus the other day on accident. (Some program called Dr. Spy Shreddar, or something like that.) I deleted it, but some stuff was weird with the computer. I tried restarting the system to get the old configuration back, but the virus just installed itself again.For one of the problems they made me go into the registry and set something to the value of 0 in order to get the desktop tab back in the Display Properties box. (You know when you right click on the desktop and select properties.) That's all fine and dandy, but here's the other 1/2 of my problem: I can't access some of the features in the tab.
View 8 Replies View RelatedI just logged into this forum...I was working on saving a template that I could use to start a website...but, by mistake when I went to save the image, it saved the image as my wallpaper on the desktop. My question is how do I restore the desktop to the factory Microsoft wallpaper?
View 4 Replies View RelatedMy XP is currently defaulted on it's display settings 640v by 480 pixels and will not allow me to change it. In fact, there is nothing to change it to. I dont know what file I must of deleted, but is there anyway I can download the driver or something to make it so that it can be set on opitions that are higher?
View 7 Replies View RelatedI'm having trouble changing my product key. when I upgraded from 98 to XP pro,it was with a pirate copy of XPpro CD. However, I very soon saw the error of my ways and legalised my software online by purchasing a licence with which came a new product key. This was all done online and automatically. Now, here's the thing. Due to an old and failing C drive, I have installed a new hard drive with the intention of transfering all of my files over to it before the old one gives up completely and I lose everything.
The problem is, although my existing OS and product key are completely legal, the only system CD I have is my old pirate one which will not load using the legal key.I have loaded it using the old key with the intention of changing it afterwards but, having followed the process to change it, when I run Jelly Bean Keyfinder, it shows the old key.I have also tried a microsoft windows verification and it confirms that it is not a legal licence.The process I used to change the key was: Change the OOBE Timer number in regedit, Run c:windowssystem32oobemsoobe.exe /a and run change product key, reboot and run c:windowssystem32oobemsoobe.exe /a again which tells me that windows is already activated.
I reinstalled XP Pro with SP1 on my computer today. Everything is working well except when my desktop loads the actual display is about an inch to the right on the screen. If I go into properties and change/apply the screen resolution from 800 x 600 then back to 1024 x 768 it realigns and all is well. I would just prefer to not have to do that each time I restart windows.
View 4 Replies View RelatedI recently re-installed Windows XP on my Acer Aspire 5920 laptop. My only problem with it is that I can't set my screen resolution to the actual resolution of my screen (1280x800) since the only two options are 800x600 or 1024x768.The nVidia driver I got on the acer website wont install, saying:The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit.
View 5 Replies View RelatedI would like my windows taskbar to revert to a horizontal display. I turned my back on my little brother for like two seconds and when I looked at my screen again my Windows XP taskbar was set to a vertical display. Please tell me what I need to press or where I need to go to revert back to a horizontal display.
View 2 Replies View RelatedIn the process of trying to roll back the (ati drivers) the dialog box ask for the path to where the driver is located or a disk. The path is; C:WindowsLast GoodSystem 32Drivers. But the dialog box will not recognize this path and of the disk. What disk is needed ? need a bit of guidance . OS XP Home SP2 (ATI Display Drivers)
View 1 Replies View RelatedWhen I want to change the way my PC looks I can't do it the way I want. I right click the desktop go to programs, then under the Appearance tab I can only get the looks change by doing it myself, like in 'Windows Classic" I try to change it to "Windows XP Style" but when I click 'OK' or 'apply' the PC freezes. I have to shut off PC with button The computer use to be okay. I did a clean Install of XP from my XP Home Upgrade CD. I really have NO problems but this one, making me NUTSO.
View 5 Replies View RelatedI got a windows vista computer and it came with an upgrade dvd. So i upgraded my windows xp to vista thinking I could change it back when I needed to use xp but I can`t . I went into the recovery console and it gave me 3 choices that I dont understand. I can now only use the vista version on both computers. How can I get Xp back?
View 5 Replies View RelatedI have XPSP3 running on my computer and after cancelling a download of themes half way through(I know I shouldn't do that) I haven't been able to change my colours or theme. I have tried many methods from "Doug", a restore, but not yet a repair because I don't have an SP3 disk. I have copied the message I get here, any help would be appreciated thanks.
An exception occurred while trying to run "C:Windowssystem32shell32.dll,Control_RunDLL "C:WINDOWSsystem32desk.cpl",Display"
I have Windows XP on a DELL. I tried to download the display monitor driver for E772C. When I tried to follow the instructions after downloading which told me to follow the following path: Right click on the background. Go to properties which pulls up display properties. Click on the Settings tab. Click on the Advanced button. Click on the monitor tab. Then it said to click on Properties but is grayed out so I still cant change the color to more than 4 bits.
View 5 Replies View RelatedI'm trying to change my screen-saver, but I can't get into Display. I get a message
View 1 Replies View RelatedI have a new computer! (yippee!) which has Windows XP on it! I cannot see the size of the text (too small) in either XP or the web (on the screen) can anyone please tell me how I can make it appear bigger?
View 7 Replies View RelatedHaving problems with changing the wallpaper display under one screen name in Windows XP. All others are fine, I just went through a major clean up over in the security forum.
View 12 Replies View RelatedTwo days ago my laptop display became corrupted. To start with I'll list the problems: On boot loader random $ and & signs appear with a red/green character background On same screen some chars change to others. In windows there are random discoloured pixels everywhere (although the is a sort of pattern to it. This happens when running apps, and the pixels will slowly bleed through on new pages/screens until at full intensity. Games that worked fine the day before now have graphics problems rendering them unplayable. It's not the screen, I connected an external monitor and it showed the same problem. I don't think it's the video card because of the problems at bios (before the video drivers are loaded.) this is my only decent computer and I can't afford to replace it. Screenshot attached. Notice the pink pixels on the white parts.
View 14 Replies View RelatedOver the X-mass I had some family members staying with us. For some ungodly reason she created new account as an administrator and changed my main account to Limited. Of course her account is password protected.Can I change a registry key i.e remove her password so I can change my account back to an Administrator.
View 8 Replies View RelatedSome dell driver update that was done thorugh my automatic microsoft updates changed my display. I have tried going and changing the settings in the control panel under display, but I can't get it to look like it use to.
View 14 Replies View Relatedwhen i turned on my pc today, the name of the icons on my desktop are highlighted in brown, how do i change it back to normal?
View 4 Replies View RelatedWindows is loading up in a vertical manner and not horizontal, everything appears to the side.I have no idea how this happened and how i can change this back to being horizontal.
View 6 Replies View Related