Go Back Home Installation After Vista - Would Disable Sata Native Mode
Aug 9, 2007
Isn't the problem going from vista back to xp an sata driver problem? If you would disable sata native mode then boot from the xp cd it should show the hard drive and any partitions. The biggest chore may be getting the drivers needed for XP and if is a laptop they rarely come with a floppy drive, so during the xp install I don't know if after you press F6 if you can remove the xp cd and put in a cd that you burned the needed drivers to if a floppy is not available. People should have the freedom to choose whatever operating system they want without all of the headaches
View 1 Replies
ADVERTISEMENT
Sep 14, 2008
I got this dell inspiron 1721 from a friend, and it had Vista Home Premium. I wanted to get XP back, so I installed it and then the system was dual booting and it took up 85% of my hard drive. SO...I tried to reformat it and just install XP, but the only disk i had was for my (gateway xp media center) desk top so none of my dirvers installed and then the whole thing became a big mess. Now, I have XP installled with most of the drivers installed, but now I miss Vista, and when I try to install with my Vista recovery disk, I get an error: can not install install missing or corrupt file e:sourcesinstall.wim error 0x80070570... or something similar to that. I have been at this for days on end.
View 3 Replies
View Related
Jun 18, 2008
It had Windows vista in it and she had someone put Windows XP in it. It now has a virus and my friend wants Vista put back in it. I have a cd here that says TOSHIBA recovery and applications / drivers, Satellite A130/ A135 series, Windows Vista Home Basic 32-bit. I put this cd in the rom and restarted. it did nothing. just loaded XP up again.
View 5 Replies
View Related
Jun 19, 2008
I have sony vaio laptop and it has windows vista and I am going to try to roll back to windows xp pro edition I have talk with sony they tell me that my laptop is compatible with xp and my question is do I just put it cd in and enter product key and select replace partion
View 2 Replies
View Related
Jul 23, 2007
I gave vista a shot but I dont like it. I picked up a copy of XP and I want to remove vista entirely. Ive formatted computers before but was never sure if I was doing it the right way. Do I format the HD then install the drivers then install XP?
View 7 Replies
View Related
Mar 21, 2008
a while back i got tired of vista.but never uninstalled it because i never had the disk well now i have a disc that i think will work.its the xp home edition reinstallation disc, but its from a desktop computer.this leads to my first question. will it work with the laptop im wanting to put xp on? if i can get past that. i don't have the blue dell disc that contains driver, utilities, and applications from the xp computer. i have the ones from my dell laptop which is vista. will i be able to use those disc, or download the drivers and what not from the dell site once xp is on here.?
View 1 Replies
View Related
Mar 23, 2010
i got vista can i used the xp disk that i got for the dest top pc 4 a laptop
View 1 Replies
View Related
Dec 18, 2007
My home computer gets used by four different people, all of which, apart from me, have almost no idea what they're doing. So, to protect my music collection from accidental deletion etc. I used the user access feature of vista so that only my user account could access the folder that contains all the music... I now cannot access this folder from XP... the data is still there, I've done my maths with free space on drive, but XP reckons the folder is empty, and says. Quote: d: music is not accessible Access is denied when I double click it..
View 2 Replies
View Related
Sep 10, 2008
I purchased the following system from Costco and was glad I was able to purchase the system complete without having to add components after the sale. I have tried and tried to get used to Vista (6 months) but as I am disabled and my brain doesn't always compute efficiently, I've had difficulties. Mostly with getting things recognized on the small network in my home. My other computers run XP and I wonder if there is not some conflict with the different operating systems trying to access the same files and printers? Finally I just decided to go back to XP..
View 4 Replies
View Related
Aug 14, 2007
Currenlty got an issue where i have a user who wants to dual boot with Vista and XP using sata disks.The general rule of thumb when doing dualbooting is to install the oldest operating system first, and then gradually work your way up.The way it will be setup is as so Vista - Primary partition of the 1st disk
XP - Primary partition of the 2nd disk.Now, The way i was thinking of doing it was to install XP first, then install Vista, And modify the boot.ini to find the entry for XP.Is there any difference in modification of the boot.ini file when using sata drives, and is there any difference when making mods in Vista (As i have only edited the boot.ini in XP)
View 1 Replies
View Related
Mar 9, 2008
I want to replace Vista with XP however my laptop has a SATA HD. I know that I can create a boot disk on either a floppy or a CD however I think it should be possible for me to install the drivers on an external USB HD? Before I format my drive I just wanted to confirm that this is possible?
View 6 Replies
View Related
Jul 30, 2007
i read a very similar problem on this forum searching for a clue to get xp running. i recently bought a gateway GM5478, http://www.gateway.com/retail/gm5478.php that came pre-loaded with vista, some programs that i need to run now aren't compatible with it yet so i need to downgrade. i've tried using nLite to create a xp boot disc with the drivers integrated but it failed twice, resulting in the same blue screen error. the drivers im trying to use are:
ive also thought about purchasing a usb external floppy but i read that only three types are accepted during the xp install process and i couldn't find any of them online.
View 1 Replies
View Related
Feb 24, 2008
So I'm using my a8n-sli premium motherboard and have been just using 1 sata hard drive using Windows XP for about a year. I bought a second sata hard drive last week and installed Vista on it.I just can't figure out the correct boot.ini for this to work,I get an missing NTLD message, when I try to boot from Vista, but the XP one works with that configuration.I can boot off the Vista one fine if I set it in the bios boot order to come up before the XP hard drive, so the drive and the OS are fine
View 3 Replies
View Related
Sep 6, 2007
first and foremost is considering I have all of the old videos, files, pictures etc on my 80 GB Maxtor that I plan on transfering to the SATA hard drive since it's faster and I'd like to use the SATA as my primary...so all in all that makes things complicated in itself.
What I did was got everything ready, I didn't back up anything from the Maxtor (IDE) because that is out of the plan since I hope to do a simple drag and drop transfer of all the old stuff to my new SATA hard drive. I went into my BIOS and set the boot priorty to the SATA and it detected my SATA drive fine. I got out of the BIOS and inserted my Win XP upgrade disc. I let it go and also inserted the SiS 964 RAID Installation support disk so that it would install the SATA controller that was included in the Foxconn mobo. Then keeping my IDE drive intact, I deleted and formated the SATA to create a partition and installed XP on it......
View 5 Replies
View Related
Jun 23, 2008
I have been trying to dual boot my Vista Ultimate system and XP, the problem I run into is that once I get the XP partition, put in the XP boot disc and restart the system the XP install starts. It loads the drivers that it needs for the install but then I get the blue screen saying that windows has shut down to protect the computer. I do have a SATA drive and I've heard this causes issues but I haven't heard of one exactly like mine before (I never get to the actual installation just the pre-loading).
View 5 Replies
View Related
Oct 4, 2009
Independent Dual Boot capabilities on two separate & independent drives, one on the MOBO EIDE controller the other on the VIA SATA RAID Controller on the same MOBO. I am attempting a clean installation of Windows XP on the SATA Drive but the system fails to recognize even the presence of the drive. This, even after stripping the system of all drives except this one, and after 'prepping' it to be bootable with MAXTOR prep. tools.Was there ever a restriction on putting an O/S on SATA drives even on the MOBO? I have all the updates installed, "I think".
View 6 Replies
View Related
Oct 8, 2006
I'm can't get WinXP installation to find my Sata Hard-drive. I'm running Suse Linux on my IDE-HD and I could also had no problems getting my Suse 10.1 installation to install on the SATA-HD. I've booted up with winxp media install disk and tried to use the F6 key at the right time but nothing happens so it keeps going until I get to the point where I can press the S key to install SATA RAID driver from disk that came with my motherboard. The drivers install but then windows install still says no disk to install windows... I don't get it.
I've checked my bios and SATA in there, in fact the first thing I see when I boot up in the boot sequence is the SATA drive. Linux knows it's there but windows install doesn't. I installed XP on a WD SATA drive before and all I had to do was press F6 to install the controller from the XP disk but that doesn't work now.
View 7 Replies
View Related
Aug 26, 2005
I remember from within the last month using a cmd line tool in XP which basically scrubs the unused portions of the hd by doing a 3 pass write of 0s and 1s on the drive. Problem is I forgot the file name. Anyone know it off hand?
View 9 Replies
View Related
Apr 20, 2006
Does anyone know how to install windows vista? are the old drivers compatible with the new OS? i'm runnning p4 3.0ghz 2gigRAM,nvidia graphic card,cmedia 3d audio...i guess there is c with the new Vista OS..how about the anti virus software compatible compatible?
View 5 Replies
View Related
Apr 8, 2010
the last time i formatted my hard drive was 2 years ago and i actually did this same thing. went from Windows Vista BACK to my XP.. i just cant remember how i did it.. i know i was in some sort of MS DOS looking thing.. and i chose to partition my Vista HD or whatever and straight up formatted it. the entire Vista was GONE and once it was gone, i restared or it restarted for me and i had my XP disc in the CD/DVD-Rom drive and it automatically started installing that on the new and clean partition.. Vista was gone, as well as everything i once had.. but i DID back everything important up...
i know SOMEONE out there knows what im talking about and how to do it this way without KILLDISK or any other software. i just want to use what i already have, like ive done in the past. format the partition tha Vista is on and start over fresh and new with XP. my computer came with XP on it and about 2 months later i received the Vista upgrade in the mail and upgraded to it.
View 3 Replies
View Related
Nov 22, 2008
Recently my computer was running really slow so i took it to the shop they uninstalled windows vista and added windows xp now it doesn't work properly how can i put vista back on without the original disc.
View 11 Replies
View Related
Jul 8, 2006
When powering up, my XP OS comes up initialy as 1024 X 768 pixels as determined by me. My complaint is the delay created by the display switching to VGA Mode, then back to 1028X768 as the desktop is displayed.
Is this 1024 to VGA to 1024 necessary or can the VGA mode be circumvented?
View 6 Replies
View Related
Feb 9, 2009
Mobo is Biostar p4m90-m7c fe
Bios finds 320G SATA drive fine.
Put Win XP HOme (original version from wayyyyyyy back) in cd=drive. XP boots from disk and sees the drvie but ONLy as 130 or so Gigs. I realize this is a limititation of xp prior to all the service packs, but how do I get around it? BTW there is no Floppy in the computer (none of my puters have working floppys!) I thought I'd be tricky and installed the disk to my other winxp machine and formatted the drive into a 40G and 280G partitions both primary the 40G first. Retried the new machine and it didn't recognize the partitions and listed only one unknown drive of about 130 gigs.
Looked int he bois and didn't see a setting for ide/raid for the sata. I've read where you can F6 durring the install and load additional drivers but all those post linked to external sources for key information and those links were dead. How can I get around this limitation? If I need to load drivers during the install I assume I can burn them to a cd on my other computer and f6 during the install to load them, but what drivers am I looking for if this is the way to go? If not how can I get all of my drive available. I did try simply letting install format the 130 partition hoping that when I finished the install the rest of the drive would show up as unpartioned but that didn't work out.
View 12 Replies
View Related
Dec 7, 2007
Hi All. My problem is this. I have a legal copy of XP Pro (OEM) installed on this computer. The hardware is very dated (about 6yrs, AMD 1800+, AGP 2, PC2100 ram) and I want to upgrade to new stuff. So being a good citizen I called Microsoft and ask the question, "How do I legally install the legal copy on my new equipment while uninstalling it from the old?" The old hardware is not going to be reused, just to old and slow. Two reps from M$ told me that I could not use my legal copy with the new hardware while one said that I could but had to uninstall it somehow while online so they could verify and activate it for the new stuff. They never got around to telling me how to do that. I take that as a no that they won't allow the 2nd use. So what OS would you choose at the moment? I think I am going to try to reuse the current copy. If that doesn't work I'll repurchase, but which? XP Pro, XP Home, XP 64, Vista, Vista home, Vista 64? I understand that SP1 for Vista has gone into beta so it shouldn't be long to get that. If anyone has some input or experience I would greatly apperciate it. Does anyone think that this is wrong? I'm not trying to cheat M$, as I said it is a legal copy. Any Microsoft employees out there? If I want to reuse a piece of hardware no prob right? Seems to me to be the same thing. Anyway tell me what you think and thanks.
Mike
PS: By the way I use the machine for general purpose computing and gaming which is why I need to upgrade. I have been getting Fragged alot in UT2K4.
View 4 Replies
View Related
Aug 5, 2009
I've got this old mobo Abit VT7. I want to install XP on it. However, the XP disc doesn't recognize SATA hard drives. So I downloaded official SATA driver from the Abit website http://tinyurl.com/kua5qz and tries to slipstream my XP disc following the instructions set forth here http://tinyurl.com/37anvn . I am not too clear how to incorporate the drivers from the official drivers, but Nlite seems to be able to find the drivers once I pointed it to the top unzipped driver directory, and I selected the XP folder for it. However, the newly created XP disc still fails to recognize the SATA hard drives. Alternatively, I believe I could have a boot floppy which would load the drivers in, then I launch the setup in the XP installation CD via command line. But I don't know how to create a boot disc which has those SATA drivers in.
View 6 Replies
View Related
Jul 1, 2010
My vista is not performing any new install nor run any pre-installed programs.
View 2 Replies
View Related
Oct 30, 2008
The moment I loged in and reboot. I bumped into the unbootable stage again. However, this time the repair feature did not work and I ended up having to do a re-install. So now I'm stuck with this:I've tried running eveysingle usable option in the repair window but none worked. I've even tried replacing the BOOTMGR via CMD in the repair window with the Windows Vista Disc but still nothing.And whenever I try to do the install, once it gets to the last step. It tells me something like this:"Cannot move onto next steop, issue doing the install blah blah blah. Windows will not restart something something."
View 5 Replies
View Related
Sep 10, 2008
I've formatted my hdd using hirens boot cd, partition magic. xp install starts, goes through "setup is loading files", gets to "setup is starting windows" and stops, all activity stops (hdd, cd), full silence. if i'm not mistaking, eula comes next and F8 to continue. i left it for 8 hours and waited, no result. same thing happens with vista - goes through loading files, i get a screen with that green line going from left to right and goes on and on and on forever.I've tried with 2 different xp cds, one xp64 cd and vista dvd. nothing.linux ubuntu installs without any problems.i've tried erasing MBR with acronis disk director suite (hirens boot cd) and with DOS line "fdisk.exe /mbr", but every time my installation freezes.
View 5 Replies
View Related
Jan 20, 2009
In 2005, I bought a desktop PC, which included an installation CD for Windows XP. That computer broke down a few months ago, so I bought a laptop with Vista pre-installed. I have grown really tired of Vista and I would like to use XP for my laptop. So I used my old XP installation CD, but after I clicked "Install", a message appeared. It told me that the installation could not be done because the Windows system on the laptop (Vista) was newer than the XP on the CD. Can this be fixed in any way?
View 3 Replies
View Related
Jul 1, 2009
I'm going to start off with my whole process on how I did this. I am performing this in a Compaq SR5310F Desktop computer that originally came with Vista Home Premium:Within Vista, I opened the Disk Management utility. I then shrunk the volume and left myself with exactly 40GB of unallocated space for my XP installation. I then booted from my XP Pro cd, selected that unallocated space, formatted it using NTFS, then installed XP. It copied all the files fine, but when it reboots to launch the GUI of the installation, I get a message saying, "Error loading operating system"
View 7 Replies
View Related
Mar 20, 2010
I'm trying to log in safe mode to windows XP. After pressing F8 and choosing safe mode the log on window appears but the keyboard won't work to enter the password. I turned off the computer and try again like ten times and still can't make it work.
View 3 Replies
View Related
