Install On SATA From Vista - Blue Screen Error
Jul 30, 2007
i read a very similar problem on this forum searching for a clue to get xp running. i recently bought a gateway GM5478, http://www.gateway.com/retail/gm5478.php that came pre-loaded with vista, some programs that i need to run now aren't compatible with it yet so i need to downgrade. i've tried using nLite to create a xp boot disc with the drivers integrated but it failed twice, resulting in the same blue screen error. the drivers im trying to use are:
ive also thought about purchasing a usb external floppy but i read that only three types are accepted during the xp install process and i couldn't find any of them online.
View 1 Replies
ADVERTISEMENT
Mar 9, 2008
I want to replace Vista with XP however my laptop has a SATA HD. I know that I can create a boot disk on either a floppy or a CD however I think it should be possible for me to install the drivers on an external USB HD? Before I format my drive I just wanted to confirm that this is possible?
View 6 Replies
View Related
May 5, 2007
Whenever I try to reinstall Windows via CD boot up or desktop, I get the following BSOD, All error codes are from one "Blue Screen 0x0000008E 0XC0000005 0X77520892 0XF700AA1C 0X000000000 This BSOD appears between the switch over from Windows loading basic startup drivers etc to the Blue GUI screen where you would choice to repair or new install.Even after I remove All the hardware such as video, sound etc cards, along with changing out hard drives and connecting only 1 CD drive
View 6 Replies
View Related
Nov 14, 2006
2 SATA Raid hard drives with striping.I'm having problems installing Windows XP Pro on my machine. When we first started to install the OS on the machine, I kept getting a blue screen error message before it boots into setup saying ERROR 0X0000007B. And then after that it started showing up book disk failure. Instead of SATA we tried just one EIDE HD, we switched memory, new cables, new powersupply, we switched the vcard. And just recently we finally switched the Motherboard. Now when we boot off disc we get an error message saying "boot disk failure". So we ran a boot setup windows xp floppy. It gets all the way to where it asks for "please insert windows xp installation cd" and when I do it doesnt recognize it but I hear the CD spinning. We've switched out the CD-roms with 2 different ones and still can't get any progress.
View 8 Replies
View Related
Jan 1, 2007
Every time I try to install the si3112 driver I get an Install key fail error followed by an install driver error. I have tried to install it off both a floppy and the nvidia cd and both give me the same errors.
I have no trouble installing the si3112r driver (the raid) version' but I want to use it as my start-up drive. I have a GA-K8N PRO mobo and the drive is a WD3200ks. If I can't get it to run where can I download a replacement dirver from --with-out haveing to download a huge driver package?
View 7 Replies
View Related
Aug 14, 2007
Currenlty got an issue where i have a user who wants to dual boot with Vista and XP using sata disks.The general rule of thumb when doing dualbooting is to install the oldest operating system first, and then gradually work your way up.The way it will be setup is as so Vista - Primary partition of the 1st disk
XP - Primary partition of the 2nd disk.Now, The way i was thinking of doing it was to install XP first, then install Vista, And modify the boot.ini to find the entry for XP.Is there any difference in modification of the boot.ini file when using sata drives, and is there any difference when making mods in Vista (As i have only edited the boot.ini in XP)
View 1 Replies
View Related
Feb 24, 2008
So I'm using my a8n-sli premium motherboard and have been just using 1 sata hard drive using Windows XP for about a year. I bought a second sata hard drive last week and installed Vista on it.I just can't figure out the correct boot.ini for this to work,I get an missing NTLD message, when I try to boot from Vista, but the XP one works with that configuration.I can boot off the Vista one fine if I set it in the bios boot order to come up before the XP hard drive, so the drive and the OS are fine
View 3 Replies
View Related
Aug 9, 2007
Isn't the problem going from vista back to xp an sata driver problem? If you would disable sata native mode then boot from the xp cd it should show the hard drive and any partitions. The biggest chore may be getting the drivers needed for XP and if is a laptop they rarely come with a floppy drive, so during the xp install I don't know if after you press F6 if you can remove the xp cd and put in a cd that you burned the needed drivers to if a floppy is not available. People should have the freedom to choose whatever operating system they want without all of the headaches
View 1 Replies
View Related
Apr 1, 2006
I have a problem installing XP. Here is a quick bit of history :When I initially installed XP, kept ketting blue screen during install. Took the PC back to the supplier and they 'changed something in the bios' and then it worked fine. Hard drive crashed.Have had to replace hard drive and during the process lost all BIOS settings. Managed to get an image of the drive onto new drive, but some files are corrupt, so tried to do a repair install of XP, but when it gets to the installing devices bit, the PC just reboots, installation restarts, gets to the installing devices bit and then the PC just reboots and so on.I'm assuming this is the same problem with the BIOS settings but I don't know what to change. It is an award BIOS and the motherboard is as GA-8S648FX.
View 7 Replies
View Related
Jan 8, 2007
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this?
Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose.
Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
View 9 Replies
View Related
Nov 22, 2008
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
View 7 Replies
View Related
Sep 22, 2008
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
View 5 Replies
View Related
Nov 12, 2009
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
View 10 Replies
View Related
Oct 5, 2010
Toshiba Satellite running on windows XP
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
STOP: 0x00000024 (0x00190203, 0x83306788, 0xC0000102, 0x00000000)
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
Intel UNDI, PXE-2.0 (build 082)
Copyright (C) 1997-2000 Intel Corporation
For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.13 (020326)
PXE-E61: Media test failure, check cable
PXE-M0F: Exiting PXE ROM.
View 7 Replies
View Related
Oct 23, 2009
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
View 2 Replies
View Related
Nov 18, 2006
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
View 12 Replies
View Related
Apr 7, 2006
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows:
Kernel-Data-inpage-error stop error screen
then there are a lot of numbers etc.
I have sometimes noticed a slight change in fan noise prior to freeze (speeding up)
After reebot everything's back to normal.........
View 4 Replies
View Related
Nov 10, 2009
Decided to do the semi annual reinstall of XP. Machine was lethargic but not broken.Prior to starting had reassembled the latest drivers for motherboard, video card, printers, mouse etc and put on a USB stick..All went pretty smoothly but after about 6 hours started getting BSOD The only thing thats changed is software the last thing it did was 71 updates from Microsoft! I have searched other posts but what can I DO about the 'problem'.I have done all the obvious - chkdsk, scan for virus etc etcI cant roll back as it will pretty much take a single jump back to an unformatted drive.If I reinstall why whould I expect a different result ? (unless the order of updates is significant)
View 2 Replies
View Related
Jun 24, 2006
I recently acquired the computer listed in my specs, and was having 10 second freezes when running programs or just exploring the hard drive. I have XP Pro SP2. I figured it might be windows or something so I tried running a clean install. Just after it asks for SCSI or RAID drivers at the bottom it freezes and then blue screens on me saying "A problem has been detected and Windows has been shut down to prevent damage to your computer... blah blah blah, error code STOP: 0x0000007B (0xF7CAE524,0x00000C34,0x00000000,0x00000000). So I ran the Windows disk checker after booting in my original XP Pro SP2 and it gave me the same blue screen. AFAIK I have 2 Western Digital 74GB HDs in RAID 0 configuration... I surmise RAID 0 was installed incorrectly or I have a bum hard drive.
View 9 Replies
View Related
Aug 4, 2008
I have a PC that has had Vista on it and am trying to install XP. I connected the drive to my other XP machine to back up some data from it and then used disk management to format it (NTFS). When I tried to install XP (SP2) from the CD it kept going to a blue screen. The blue screen says it has stopped windows due to a problem and give the stop code - *** STOP: 0x0000007B (0XF7CAE524, 0xC0000034, 0X0000000, 0X0000000)
I tried deleting the partition to see if the Windows disk would make it to the format but the same thing happened. It's a SATA drive that I am using.
View 6 Replies
View Related
Dec 11, 2004
Not sure how much info you need, so I'll start at the beginnig.I'm trying to install my DSL service, but everytime I got to account setup, a technical error popped up and told me to try again later.I tried downloading internet explorer, but it only works when I'm using a separate internet provider (aol).Aside from me not being able to log on with my dsl, everything was fine.I also tried downloading the updates for my computer, but my explorer froze, so I restarted.This brings me to my biggest problem:After I restarted my computer, when my desktop was loading, a blue screen popped up that said physical memory dump.Remove all newly added hardware, and delete newly added software.Try restarting your computer, if this screen appears again, run system diagnostics utility supported by your hardwear manufacturer.Run memory check.0x00000000,0x00000000,0x00000000,0x00000000
View 14 Replies
View Related
Sep 10, 2005
I'm having a problem with this computer that I removed a bunch of spyware and viruses from. Basically the issue is at the same point every time I attempt to install SP2 it blue screens on me. There are no errors in event viewer when I reboot for that exact time it blue screened. I'm wondering what could be causing this. I've already check and made sure it wasn't faulty ram. Any other ideas what may be causing this system to blue screen at the same exact point each and every time I try to install SP2? Only with
SP2, I can browse the net etc all the time without any issues.
View 6 Replies
View Related
Apr 10, 2010
Recently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
View 3 Replies
View Related
Oct 19, 2009
I am reinstalling Xp and I am getting this blue screen error message
0x0000008e
(0xc000001d, 0x806e5049, 0x80550280, 0x00000000)
The computer is an Acer laptop 5610
how can i solve this problem?
View 1 Replies
View Related
Sep 18, 2008
I tried to install windows xp professional. When it is installing the os in the blue screen. A pop up says. I tried to reinstall my windows xp because it couldnt boot up because it say that my drv.sbd got corrupted or missing file so i try to reinstall the os but problem popped up.The file AFw.Sys (unknown) is needed and they ask me to browse it for the path file but i cant find it nowhere. And then it says The exception unknown software exception (0XC0000409) occurred in the application at location 0X6976Ea96
View 2 Replies
View Related
Apr 2, 2008
I just tried to install XP Pro x64 on my Dell XPS 720 PC. After it loads all the drivers, it crashes with a blue screen, giving me an error message. I tried to reset my BIOS to factory defaults, which screwed it up entirely and now I have to reinstall my original operating system (same, just 32bit) too, though I worried because the setup doesn't seem to recognise the entire size of my hard drive, or the other partitions. It gave me a BAD PBR as I tried to boot normally.I had my hard drive partitioned with Norton Partition Magic, maybe this caused it? Please can you advise how to fix this!
View 8 Replies
View Related
Nov 8, 2009
Decided to do the semi annual reinstall of XP after boot time got up to 9 mins and shutdown got to 5 mins.So nothing was really broken.Its a no-brand desktop machine based on GA-M55Plus motherboard. Have a main disk SATA II and two more in a Raid-0 array.Prior to starting had reassembled the latest drivers for motherboard, video card, printers, mouse etc and put on a USB stick..Disconnected the Raid array, blew away the partition on the main disk and installed XP from original media (which has SP2 included)
All went pretty smoothly but after about 6 hours started getting BSOD - its still too quick to read KERNEL something.along with the advice to uninstall recent additions / drivers etc.This happens after a few minutes or a few hours.Well the last thing it did was 71 updates from Microsoft!! (Including the cursed IE-8 which had previously caused grief on this machine)I can think of two things that have changed since before.
1. the 'latest' drivers
2. the order things were applied
Can you help with any advice as to the order things should be installed.
Whilst waiting for MS to get around to delivering updates I was installing the drivers etc. Starting with the chipset and video drivers.So is it best to wait hours to days for MS to deliver all the junk? (without the mobo drivers its a bit average)Can you get an image of XP with SP3 included - better yet all the 71 other vitally important updates? Do you think it would help to wind back the auto installed updates and try and get them in small chunks?(and why cant you download once and use many times!)
View 1 Replies
View Related
Dec 29, 2007
I get a blue screen error message?
View 6 Replies
View Related
Oct 19, 2010
I have a Prolink Hurricane 9601C Modem. It has two LED's indicating Power and Link. As of recently, the Link LED, starts to flash on and off, and all network connections get terminated. The Driver software of the Modem stops responding. I tried to unplug the network cable and re attaching it, but nothing happens.... The System will not shutdown either. Once windows logs off, I get this Blue Screen Error.A problem has been detected and windows has been shut down to prevent damage to your computer.
View 8 Replies
View Related
Jun 18, 2008
For the last three days I have been getting a blue screen error, the only thing I have done is ran Softwar inspector Secuna, and uninstalled Abobe Reader and reinstalled the updated version.Error message: A problem has been detectd and Windows has been shut down to prevent damage to your computer.KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error Screen, restart your computer. If this screen apperas again floow these steps. Check to make sure any new hardware or software is properly installed. If this is a new install ask your hardware or software manufactor for any windows updates you might need. If the problem continues, disable or remove any new installed hardware or software. Disable BIOS memory options such as coaching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer. Press F8 to select Advanced Start up Options, and then select Safe Mode.
Technical Information:
*** Stop:0x00000077 (Ox000000E,OxC000000E, Ox00000000, OxOACF80000)
Beginning dump of Physical memory.
I don't really understand this could someone please help me with this problem?
View 14 Replies
View Related
May 23, 2006
I am running XP media center 2005 and it is a pretty fresh install. All of a sudden today I am having crashes and the one blue screen I got had this code on it -
STOP: 0X0000008E(0XC000005, 0X805AE8AC, 0XA55DEBDC,0X00000000)
View 14 Replies
View Related
