New MB Without Re-Installing OS / Repair Wont Work?
Feb 25, 2008
Had customer mb go out, and after putting in a new mb, windows blue screens on boot (of course..was expecting it). Usually do a re-install when replacing a mb, but in this case, the customer has some software that cannot be replaced, so my question is...can you swap mb's in a system and not have to re-install and loose data? I can get to safe mode, so thats a step in the right direction, and the windows "Repair" unfortunately dosent work.
View 9 Replies
ADVERTISEMENT
Nov 17, 2006
okay at first this wasn't too anoying but now it is a major problem at first it was just that when i went to windows update it would get stuck in the thing where it says that it is checking for the latest updates.to try and solve this issue i did these things:i ran windows update for 3 days straight and didn't do anything on my computer (it was stuck in the screen i mentioned before)i reinstalled windows, but for some reason the problem carried over a friend of mine told me about windows defender and that it was free, so i installed it and behold it uses windows to update and im stuck with the bare bones of the program.
View 4 Replies
View Related
Mar 9, 2007
I need to re-install XP pro because I have been having issues. I want to do it so I dont loose everything so I wanted to re-install from boot. I checked my settings to be sure I boot from cd first and it does. Well I get to the point where I can hit any key to boot from cd and the system then continues on to load from the harddrive. The cd never starts. I finally went and opened the cd from the drive itself. One of the choices then is to install XP but it mentions I would loose everything.The CD is Xp Pro full version dist with new systems. What am I doing wrong? Its been a long time since I re-installed.
View 14 Replies
View Related
Jun 7, 2005
My windows installing corrupted.
View 2 Replies
View Related
Dec 19, 2005
I have a problem with IE and I have tried to do IE repait without success.
So, if IE6 and OE come with XP, does it makes sense to re-install XP as it will fix?
I have tried to do this following "The Elder Geek" instructions but could not complete.
View 7 Replies
View Related
Jun 20, 2006
Whenever I try to repair Windows, everything goes fine up till this point, where half-way through the "Installing devices" stage... nothing seems to happen, no progress. The setup doesn't hang or freeze, it seems to be working just fine except that nothing happens, it does not complete this part, just sits there. I've even left it for an hour and even then no progress.However, if I commence a new setup, a new installation, this problem does not occur and the setup completes successfully.
View 2 Replies
View Related
Jun 30, 2005
can anyone out there tell me how to fix this
View 2 Replies
View Related
Aug 22, 2007
Did a repair install, everything is working except windows updates, it says I have updates and I can click on custom and it shows them when I click to install them it acts like it will then a box comes up and say they all failed. I turned off auto updates and went to the site and click on custom and they came up but the same thing won't install did it with express install to and its the same,. Any one know what could be wring, one update it needs is the windows validation update I know the disk is valid it came with the machine and it retook the product number when I did the repair install.
View 1 Replies
View Related
Feb 11, 2008
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
View 14 Replies
View Related
Feb 11, 2008
When I turn on my computer, I get the following message:
"We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.
If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.
If a previous startup attempt was interrupted due to a power failure or because the Power or Reset button was pressed, or if you aren't sure what caused the problem, choose Start Windows Normally.
View 2 Replies
View Related
Jun 8, 2010
pop up saying that avg needed to update, it gave me the option to postpone it so i did; it told me it would be done when the computer was shut down.
today monday, i turned the computer on and all i had was a blue screen...the only way to access the computer was through the debugger mode, after several things I decided to repair my windows xp... and foolishly did not make backups of my data. During the XP repair the intallation was not completed when a new blue screened popped up saying a different message.BAD POOL CALLER and STOP: 0x000000c2 (0x00000007, 0x00000cd4,0x00340045,0xe1d4de7c)
View 4 Replies
View Related
Sep 1, 2010
I have XP with service pack 2 already installed. I tried installing sp3, following all the guidelines about being an administrator, closing all programs, disabling virus scanners and such, but consistently get this "internal error" as soon as the installation starts. The event viewer doesn't say anything useful, but according to http://support.microsoft.com/kb/949384/ this is a problem with a funky product id.
The solution says I should go to the System Properties to get the product id. Well an abstraction of that product id is 69831-xxx-xxxxxxx-xxxxx. Then it tells me to go to HKEY_LOCAL_MACHINESYSTEMWPAKey-XXXXXXXXXXXXXXXXXXXXX, and work with the fields in there. It predicts that there might be more than one key conforming to that format, and there is. It says I should pick the key that has the same ProductID as found in the System Properties, but they both have the same id and it isn't what I found in System Properties, it's 55285-xxx-xxxxxxx-xxxxx.I have one product id in System Properties, and another that appears in two keys in the registry.
Here's my SysInfo:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Home Edition, Service Pack 2, 32 bit
Processor: AMD Athlon(tm) XP 2600+, x86 Family 6 Model 10 Stepping 0
Processor Count: 1
RAM: 1023 Mb
Graphics Card: NVIDIA GeForce 6200 , 128 Mb
Hard Drives: C: Total - 103936 MB, Free - 25331 MB; D: Total - 13228 MB, Free - 8921 MB; G: Total - 70605 MB, Free - 11730 MB;
Motherboard: Gigabyte Technology Co., Ltd., nVidia-nForce2, 1.x,
Antivirus: AVG Anti-Virus Free, Updated: Yes, On-Demand Scanner: Enabled
View 2 Replies
View Related
Nov 12, 2009
I managed to create a new partition on my Compaq Presario C700 laptop and install XP. (It came with Vista).First thing I noticed was that I can not detect any wireless networks or connect to the internet now. I am assuming that I need that driver and a whole bunch of other XP drivers as well. I have visited websites where they have a whole laundry list of drivers to download for my situation. Before I go through the painful process of downloading and installing all of them, I want to make sure this is really what I need to do.
View 3 Replies
View Related
May 26, 2008
I was informed the Windows XP does not work with Dual Core Processing systems, and that you need Vista in order to get the performance out of the 2nd core? is this true?
View 2 Replies
View Related
Aug 1, 2005
I have just installed some anti virus software and during installation I got messages saying my registry had been damaged and i should log onto such-and-such site to download repair software and run it on my system. I am suspicious that if I do this I am exposing myself to total destruction. One of the messages has just popped up again and the site it directs me to is FixReg32.com.
View 2 Replies
View Related
Aug 24, 2005
Problems started was when i updated my Zone Alarm firewall, windows works absolutely fine no problems what so ever, then next time i reboot it does the same, this time problems are non-stop until about 10% then fine from there on in, then when it finishes repairing the drive it gets stuck at repairing unreadable security descriptions date stream.
It also said whilst recovering orphaned files insufficient disk space to recover lost files. It stopped for a while then carried on. After scan disk it restarted and wouldn't load windows, just got stuck on windows loading screen forever, eventually 15+ minutes i pressed reset as there was no disk activity.
View 14 Replies
View Related
Nov 30, 2008
I recently had a bad hard drive (It need the windows xp cd to boot) and saw that the problem was bad blocks. I decide to buy a new hard drive and use ghost to clone it. But, now i have the same problem with the new hard drive. After a while, i realize that obviously, if the disk was cloned, ONLY the information that can be copied was transfered to the other one.In conclusion, how can I resolve this issue without using system repair. the problem is that once i use this tool and then IE won't work. at last I had to format the drive.
View 2 Replies
View Related
Dec 20, 2006
I install Server 2003 Standard SP1 downloaded and installed on a PII 400, 256Mb RAM with IIS, ASP.Net 2.0, SQL server 2000 SP4, Mysql 5, and PHP5, and all without a single hitch...too good to be true. I went ahead and tried on what will be my server PIII600, 512 MB RAM, First try, Server 2003 couldn't find a file when installing, retried and it worked. Downloaded SP1 and when I was extracting it said "file is corrupt", downloaded 4 more times with same result. reformatted and reinstalled 5 more times and cannot get past "file is corrupt" on SP1 and sometimes extracting the .Net 2.0 installer got the same error. I swap all hardware with PC from first try (except RAM, Mobo, CPU, CDROM) with no change. Win98 and XP installed fine on the second PC just can't get server 2003
View 3 Replies
View Related
Feb 19, 2005
I recently installed xp for the first time after replacing motherboard and CPU.I skipped setup because I didn't know what I was doing. Now I can't boot up (cold or warm) without using the original disk. Can I just go into setup and change boot settings without re-installing.Is there anything else I should know before I attempt to fix this problem? I am tired of using the disk every time I update something or install new program.
View 14 Replies
View Related
Jul 11, 2010
I have a Logitech M305 wireless USB mouse that my XP won't recognize on any port. However MY XP recognizes my wired USB mouse and printer, and scanner. The M305 works fine on my other machines?
View 3 Replies
View Related
Jan 6, 2007
i have MCE and whenever i try to play a video or tv, it says that the files needed to display a video are missing or corrupted. How can i fix this. The videos work fine in Media player, but not in Media Center
View 7 Replies
View Related
Oct 24, 2008
Did all kinds of virus and adware checks but no change. When I try to open msconfig I get a short hour glass and that is all.
View 6 Replies
View Related
Jul 13, 2005
I am using the IIS on Windows XP to test pages I develop. Is there a limitation that Includes are not processed? I know they work on the server but do not seem to work from the local IIS install.
View 2 Replies
View Related
Apr 19, 2008
I've been casually looking for a new laptop for my Mom for her first computer. Now I am ready to get one, but just about the only choice is something pre-loaded with Vista. I have no experience with Vista and have heard more bad than good about it, therefore I think it would be easier to get her up and running if we're not both having to learn a new OS.
I upgraded my computer from ME to XP with few problems but wondered how difficult it would be to take a new laptop and go backwards. I know I'd most likely have to purchase a Full version of XP, but how much of a hassel is it to get all the drivers/XP versions of necessary pre-loaded software? Would a Vista compatible version of say Word work if I did this? Any other problems I haven't thought of?
View 13 Replies
View Related
Mar 6, 2010
I re-formated my sisters computer yesterday, and after installing it i had no internet. As i hadn't installed any drivers yet, i understood that. But after heading over to dell's site, downloading all of the drivers for her computer and then installing them, i STILL do not have any internet. I don't see any connections on the computer either, it's just blank!
View 4 Replies
View Related
Feb 14, 2006
I just got a laptop with 200 server installed on it and I would like to learn about it. I need some help with what I thought would be a simple setup. I want to set up 2 users for this laptop. myself and my daughter. I have it set with myself as the admin and her as a user. I want to be able to limit the amount of damage she does to the poor thing. My main question is how to set up certain programs to work and not work for her. I have one program music match that works in admin but not on user even though it seems to say it will work for users. From what I have seen from this operating system its not real easy to set it up. I have a book from the library but its a que and not good for me. Any advise on a good book would be great. I know it would be easier to use xp or win 2000 pro but thats not nearly challenging enough for me.
View 1 Replies
View Related
Jul 12, 2009
When i tryed installing a new dvd rom on my computer, it installs drivers for a cd rom instead.
And when i try to play a dvd r it won't, it will only play cdr's.
View 4 Replies
View Related
Apr 29, 2010
I have a Toshiba laptop satellite series A205-S5814.the time i bought it the USB ports were working but after a period of a year they are no longer working I updated the drivers but still now. I also changed the operating system that is from vista to XP but the problem persisted. It did not stop on that only, the DVD-ROM also failed to read DVDs.
View 8 Replies
View Related
Jul 21, 2005
I have a laptop with a proprietary CD that will only reformat the hard drive and load a ghost XP operating system. Is there any way to repair XP without having a MS XP disk, short of buying a MS XP system disk? By the way, I cannot stress enough the importance of backups. I use an external USB HD and do weekly full and daily differentials with NTBACKUP. When my laptop HD crashed, I was able to easily recover 100% of my files (less XP restore points, of course).
View 3 Replies
View Related
Mar 23, 2008
I've done a bit of searching on here and thought I'd found a way out of my problem but it seems not. Briefly my PC keeps looping on start up, it won't start in safe mode, last known config etc, so after reading here I've popped in a XP CD to do a repair but from instructions I didn't chose the 'r' function but pressed 'enter' to start the setup. I accepted the licence agreement and the PC found 2 partitions but I don't get the option to 'repair'. All I can do is 'end' the setup as I don't want to wipe my data
View 5 Replies
View Related
Apr 6, 2010
I upgraded from xp pro sp2 to sp3 and after that computer was very slow. So I repaired SP3 and during that process it started asking for 'asms' file. Even though the sp3 cd(which i burnt from a ISO image) had the asms folder it does seem to sense the cd. I am really stuck now because, even if I reboot my pc without the cd it goes to windows setup asks for 'asms' file. Even in safe mode it says windows setup cannot proceed in safe mode it reboots.Kindly help me on what can I do now so that either i can get thru with the 'asms' file or is there a way I can revert back to sp2 and do any possible recovery so that I can go into windows and backup my files.
View 2 Replies
View Related
